How to configure Dataguard

Sir,
Can anyone help me by sending documents to configure dataguard like step by step configuration?
regards
Mathew

Sir,
We configured dataguard(Oracle9i, WIndows 2000 server). I have one doubt.
How can we make Standy Server as Primary when Standby database fails
without DBA executing commands?
eg: Put all commands in on script file(eg: std.sql) and call from Batch file.
But how to set/schedule this file?
regards
Mathew

Similar Messages

  • How to configure dataguard in Multiple instance 10g / OEL

    we configured 3 databases in sigle server 10g /OEL
    Now we would like to configure data guard( physical standby) for all three.
    can some one guide me for this configuration?
    santhanam.

    As you have 3 databases you will have to configure 3 DR's may be in one server/different server as per your requirement.
    you can have look on following thread for how to setup DR for 10g....
    oracle 10g dataguard
    Hope it will help you.
    Anil Malkai

  • How to Configure  Oracle Management Server (OMS) with  Dataguard Broker

    Dear Experts,
    i have a production DB (192.168.200.9) 9.2.0.1.0 on Server 2003
    i have a standby DB (192.168.200.19) 9.2.0.1.0 on Server 2003
    Archive logs are shipped to standby database and applied there. *(Datagauard is configured).*
    Now i want that Graphically i want to see that archivelogs are shipping to standby database and applied there ( i want to configure Dataguard Broker in graphical mode (*dataguard manager*) isnt it ( bcz i anm bit confused with this).............?
    *1.* For this purpose to achieve i take some seperate machine install on it Server 2003.
    *2.* and then Install oracle db 9.2.0.1.0 ( here i will install FULL DATABASE, CUSTOM installation ( then createsome repository).
    *3*. can i configure this repository for OMS on my already running production or standby DB............?
    *4.* After this OMS is configured or not..........?
    *5.* how i will configure datagauard broker
    what i know regarding this is on primary and standby db *( DG_BROKER_START = TRUE)* and after
    this we have to create some configuration wizards but how
    i think i have to go with this sequence if somebody has different sequence tellm e
    wait for replies
    thanks in advance
    regards rehan
    faisalabad pakistan

    Does anybody dont know anything about this.................?

  • Not able to get data of primary in standby database (configured dataguard)

    Hi all, I configured dataguard in my local system, i ve a few qsns (as i am new, ve patience)
    1) scn differs wrt primary in standby (i checked, 1day difference), how to make scn same?
    2)i created a table in primary, its not refelecting in standby, (below i ve pasted alertlog entries)
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 2) The system cannot find the file specified.
    Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
    ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
    ORA-01110: data file 2: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\SYSAUX01.DBF'
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 2) The system cannot find the file specified.
    Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
    ORA-01157: cannot identify/lock data file 3 - see DBWR trace file
    ORA-01110: data file 3: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\UNDOTBS01.DBF'
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 2) The system cannot find the file specified.
    Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
    ORA-01157: cannot identify/lock data file 4 - see DBWR trace file
    ORA-01110: data file 4: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\USERS01.DBF'
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 2) The system cannot find the file specified.
    Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
    ORA-01157: cannot identify/lock data file 5 - see DBWR trace file
    ORA-01110: data file 5: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\EXAMPLE01.DBF'
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 2) The system cannot find the file specified.
    Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
    ORA-01157: cannot identify/lock data file 6 - see DBWR trace file
    ORA-01110: data file 6: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\STREAM_TBS.DBF'
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 2) The system cannot find the file specified.
    Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
    ORA-01157: cannot identify/lock data file 7 - see DBWR trace file
    ORA-01110: data file 7: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\DATA01.DBF'
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 2) The system cannot find the file specified.
    ORA-16004 signalled during: alter database open read only...
    3)wen i try to open standby database in read only mode gives below error..how do i solve it?
    ERROR at line 1:
    ORA-16004: backup database requires recovery
    ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
    ORA-01110: data file 1:
    'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\SYSTEM01.DBF'

    971424 wrote:
    Hi all, I configured dataguard in my local system, i ve a few qsns (as i am new, ve patience)
    1) scn differs wrt primary in standby (i checked, 1day difference), how to make scn same?Please do not use IM language here, instead of "qsns" use questions.
    SCN can be differ in standby and it can be behind to primary based on the backup you have restored. Of course by performing recovery you can synchronize standby with primary database. You can use incremental backups for standby using link http://www.oracle-ckpt.com/rman-incremental-backups-to-roll-forward-a-physical-standby-database-2/
    2)i created a table in primary, its not refelecting in standby, (below i ve pasted alertlog entries)
    ORA-27041: unable to open file
    OSD-04002: unable to open file
    O/S-Error: (OS 2) The system cannot find the file specified.
    Errors in file d:\oracle11g\app\administrator\diag\rdbms\stand\stand\trace\stand_dbw0_6916.trc:
    ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
    ORA-01110: data file 2: 'D:\ORACLE11G\APP\ADMINISTRATOR\ORADATA\STAND\SYSAUX01.DBF'
    ORA-27041: unable to open fileFirst check whether those files are exist in that location or not and if file names are different other than primary then rename file locations. Also check the permissions on the folder/files.

  • How to configure multiple listeners to listen for the same instance.

    Hello everyone,
    I am running oracle database 11g and I want information regarding how to configure multiple listeners to listen for the same database instance. Actually I know how to configure more than one listener but the main thing that I am confused about is when we create listener.ora file, do we have to statically register the database instance with both the listeners or the instance will register itself with both the listeners.
    According to my knowledge the instance will register with the listener specified by LOCAL_LISTENER parameter and we cannot have more than one value for this parameter.
    Please only give detailed answers with example as I am tired of simple answers with details that I already know.

    Hello,
    Yes, it can make sense to have several listener for one Oracle instance. For instance you may have one listener for the applications another listener for DBA administration tasks as well as one listener dedicated to dataguard broker. It is not possible to have several listeners listening on the same IP and Port.
    By default the database try to automatically register to a listener on port 1521. To instruct the instance to register to a specifc list of listeners you can add in the init.ora the local_listener parameter with an alias definition:
    i.e
    local_listener=MY_SET_OFF_LISTENERS
    in your tnsname.ora add an entry called:
    MY_SET_OFF_LISTENERS_LOCAL= (ADDRESS_LIST=
    (ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1530))
    (ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1531))
    (ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1532))
    In this sample your instance will register to three listeners listening on respectively port 1530, 1531 and 1532
    If you want your clients can be balanced over the 3 listeners

  • Can any one please tell me how to configure the oracle data gaurd. in steps

    can any one please tell me how to configure the oracle data gaurd. in steps

    Hi,
    http://docs.oracle.com/cd/E11882_01/server.112/e25608/create_ps.htm#i63561
    http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/11g/r2/prod/ha/dataguard/physstby/physstdby.htm
    Regards
    Yoonas

  • How to configure oracle listener profile for multiple oracle database

    Hi,
    I am going to install solution manager system in the same server of ERP EHP4 on Windows. Both DB are oracle.
    I'd like to know how to configure listener in this kind of envirnmonent.
    a. use two listener and different ports
    b. use same listener but different ports
    c. use same listener and same port
    Which is the correct mothed?
    And, after installation, there seem three set of profiles of listten, one for ERP, one for SLM, and the other for OS?(%windir%system32), which one is functional?
    Please advise.
    Thanks a lot.
    Regards,
    Alex

    Hi,
    standard installation is creating new configs for listener for each instance.
    I would recommend to use one listener per each instance.
    YOU CAN NOT HAVE one port number for two differnet systems!
    If you want to use one listener than you must adapt tnsnames.ora, listener.ora and ensure that both systems will use different port numbers.
    For example PORT= 15<system number>
    Peter

  • How to configure one TREX host with multiple index servers ?

    Hi All,
    Does anyone know how to configure TREX on the one host,
    with multiple index servers ?
    Reason for this is to make better use of resources available on the host server(4 Gig, 4 Processor, Windows2003), to improve the search performance of
    our KM content for portal users.
    I am using TREX 7 and have not been able to do this,
    despite reading the Single and Distributed install
    documentation.
    Any help would be appreciated.
    Regards,
    Andres

    Hi Andres,
    To make use of the RAM a Server provides you have to run two indexserver processes (each can then consume 2 GB);
    Proceed like this:
    1. Go to TREXdeamon.ini; check if section [indexserver2] is there (it is already provided, but not active in standard installation)
    2. In TREXdeamon.ini go to
    [daemon]
    references sections below
    programs=nameserver,preprocessor1,indexserver1,queueserver,alertserver
    and add indexserver2 here. Restart TREX; second porcess is then started; can be checked in TREX monitor in Portal as well
    3. To distribute existing indexes to the new process, start TREXadmintool and go to Index: Landscape
    Go to the last two columns and move the indexes (move master here/secondary mouse click)
    If you don't distribute the indexes the new index server process will be regarded when an new index is created.
    Hope this helps!
    cheers
    Bettina

  • How to configure request manager service for multiple website in one web application

    I have set up sp 2013 as below:
     web application : wa1
    site collection : sc1
    sp site: site1, site2
    I used 2 WFE, 1 APP, how can I use request manager service to control  site1 to wfe1, site2 to wfe2?
    Awen

    That's not what i'd describe as load balancing.
    A better description would be load-isolation. In your description then if the load on site1 was large (and growing) but site2 was quiet then site1 would struggle and eventually become unable to handle the number of users but site2 would still be ok. That's
    fine from a QOS point of view but it's not the norm for load balancing. It would work in simple scenarios but the out of the box load balancing tools are much better suited than that sort of approach.
    This article shows how to configure the RMS and may help show how your request is difficult to configure:
    http://www.harbar.net/articles/sp2013rm2.aspx

  • How to configure 3 different members under a single Month column

    Hi SAP Gurus,
      My client requirement is to show the report in following format, where under a Month column 3 different columns having
    1) Quantity (Number of unit ) of a product,
    2) its rate (Amount per unit), and
    3) Total (amount)    will appear in a single report.
       I have Month as a Time Dim, while Qty, Rate and Total are members of account dim.
    Que: How to configure such scenario in a single report?
    Jan.2011
    Product Category:            Qty (Input)   Rate (Input)   Total (Output)                    
    Product 1                                               
    Product 2                                             
    Product 3                                             
    Product 4                                             
    Group1                                             
         Where: Total = Qty X Rate                                        
    Thanks and Regards,
    SouarbhD

    Hi,
    Use an EVDRE to create your input schedule. You need to have one row with products and 2 columns with time and account. Choose the memberset options as per the requirement. For the accounts, is total calculated with a dimension formula? If yes, then you just need to enter the values for quantity and rate and send the data. The total will be calculated by the system and will be displayed automatically.
    Hope this helps.

  • How to configure an Alert message if communicationChannel(JMS) stops

    All,
    Is there a way how to configure an alert when the communication channel stops.
    <b>Scenario:</b>
    In the path Runtime workbench->Component Monitoring->Adapter Engine->Communication Channel monitoring, if we see that a communication channel has stopped(RED traffic light as Status), then can we trigger an alert notification for same.
    Currently we have alrerts configured for any message/s failure in the JMS Adapter Framework. So can we trigger simmilar alerts when a comm channel stops(for whatever reason).
    Thanks in advance
    RK

    Hi Sreeram,
    Thanks for the quick reply.
    We have a scenario where we activate individual channels at a given time. So in this case, Adapter will always be in RED as all queues are never running in our scenario.
    So we need an ALERT to be triggered for individual comm channels. Is theer any way that you can think of ?
    Thanks and regards
    RK

  • How to configure multiple IP addresses on one NIC?

    Hi,
    I just installed a OVM Server in version 3.2.1 and the according VMManager. Now i wanted to try to configure the Server/Server Pool. Now i come across a problem, which was already a big problem in OVM 2 while configuring the Networks.
    All our OVM Servers have three NICs in them. One is for VMs and Management, the others are for connection to our SAN (Dell PowerVault MD 3220i). My problem is, that due to the network setup, the two NICs for storage need two IP addresses in two different networks each. This shouldn't be a problem, because usually in linux all you have to do is configure something like eth1:1. I remember having huge trouble configuring it in our OVM 2 cluster up to the point where I had to write a shell script to configure the second IP.
    Anyways, I have configured two of the storage networks on eth1 and eth2 of the VM Server. Now i cannot configure any more IP addresses, because eth1 and eth2 are not available anymore for configuration in a third network. I really hoped that it would be possible in OVM 3 to configure multiple IP addresses. And probably it is only my lack of knowledge of how to configure it.
    So any advice is well appreciated.
    Thanks!
    Regards,
    Marek Hubatka

    You should be able to do this by using "VLAN Groups".
    http://docs.oracle.com/cd/E35328_01/E35332/E35332.pdf
    Check out the VLAN groups section. You must great the VLAN groups before you can assign them to interfaces.

  • IAS 10.1.2-how to configure different oc4j listen to different virtualhost?

    Hi
    I have requirement,
    we have oracle portal based web site that can be used by outside users over the internet.
    And then we have are deploying few new apps/webservices/ear files on a oc4j called core_ws. These web services should not be accessed outside.
    I have created a virtaul host in apache on a different port(7799) which was not exposed to public world.
    But, how to configure core_ws to inform Apache to listen on only port 7799 but not on port 80?
    I tried a diffent route to attack the problem(as mentioned below) which managmenet did not like:
    created location directive, worked in dev but not in production as there ISA sitting front of apache.
    We could apply filter on the URLs of these web services in ISA but my director did not like the idea as each time there is additional web service we have mess with it.
    So, he prefers running these web services on a different port that will not have access to public.
    Appreciate your help if have acheived the same earlier.

    By your description, it sounds like you want to do what is in this My Oracle Support document:
    How To Create Virtual Host Specific OC4J Applications (Doc ID 389819.1)
    https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=389819.1
    (requires login)
    You said you were using 10.1.2, so that will work, its a method of creating separate virtualhosts and using rewrites to direct to error pages if an incorrect request is made. For 10.1.3, but there is a dynamic method which is a better approach.
    ...Ken

  • How to configure sync with my local ftp server?

    I have used XMarks since now because it hallow me to synchronize my bookmarks with my local server. Now XMarks don't work anymore because it's not more possible to synchronize the passwords.
    Any other alternative imposes to use an external server and I don't want to use an external server. My data must remain on my machine it's absolutely excluded that i use an external unknown server for this.
    The only solution must be a free solution (a real free solution) and the firefox synchronization seems to me the best/only one.
    But I've not found how to configure it to use my own server.
    So how to do it, where are the options to the synchronizer to give my own ftp server or whatever other server it needs?

    iAS 6.0 sp4 officially does only support iPlanet Directory Server 5.0 sp1 and 4.13.
    For more details visit: http://docs.iplanet.com/docs/manuals/ias/60/sp4/ig/prep.htm#42084
    I guess, you can specify the directory server during the time of installation.
    Thanks,
    Rakesh.

  • ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (ex., 5 min) using the SLA?

    I have ASA 5505 8.4.  How to configure the switch to the backup channel to the primary with a delay (for example 5 min.) using the SLA monitor?
    Or as something else to implement it?
    My configuration for SLA monitor:
    sla monitor 123
     type echo protocol ipIcmpEcho IP_GATEWAY_MAIN interface outside_cifra
     num-packets 3
     timeout 3000
     frequency 10
    sla monitor schedule 123 life forever start-time now
    track 1 rtr 123 reachability

    Hey cadet alain,
    thank you for your answer :-)
    I have deleted all such attempts not working, so a packet-trace will be not very useful conent...
    Here is the LogLine when i try to browse port 80 from outside (80.xxx.xxx.180:80) without VPN connection:
    3
    Nov 21 2011
    18:29:56
    77.xxx.xxx.99
    59068
    80.xxx.xxx.180
    80
    TCP access denied by ACL from 77.xxx.xxx.99/59068 to outside:80.xxx.xxx.180/80
    The attached file is only the show running-config
    Now i can with my AnyConnect Clients, too, but after connection is up, my vpnclients can't surf the web any longer because anyconnect serves as default route on 0.0.0.0 ... that's bad, too
    Actually the AnyConnect and Nat/ACL Problem are my last two open Problems until i setup the second ASA on the right ;-)
    Regards.
    Chris

Maybe you are looking for