How to configure dreamweaver to send forms to MySQL

I already created a databe MySQL on free.fr (France) and when i put link login and password in dreamweaver it tries to connect and says "Erreur 405 - Méthode de requête non autorisée" (Non authorized method request)
thanks for your help.

I'm trying to make a web page with fom to fill in Dreamweaver CS4.
And I want the informations to be sent to a database MySQL.
this database is based in my webserver. in ordrer to access it i need login and password.
so I put them in dreamweaver (database tool).
so when DW tries to connect it show me the error message.
is there something wrong with my way of doing?

Similar Messages

  • How to configure JDBC Adapter(Sender & Receiver)

    How to configure JDBC Adapter(Sender & Receiver)
    Rgds
    Ruchitha

    Hi ruchitha thakur ,
    These r the following web-sites which give u detailed information about configuring of JDBC Adapter(Sender & Receiver)
    JDBC is a technical Adapter provided by SAP.
    Configuring the Sender JDBC Adapter
    http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/content.htm
    Configuring the Receiver JDBC Adapter
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6d36d51d-0b01-0010-b3aa-9cb313b63cf4
    SAP XI Utilize SAP Adapters to connect to heterogenous systems
    https://wwwn.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3fc4bd90-0201-0010-68bd-ab931b06f9c2
    cheers!
    gyanaraj
    ***Pls reward points if u find this useful

  • How to configure Oracle SSO for forms and apex

    Hi All,
    I am trying to configure oracle SSO for forms and apex using third party external authentication. Please help me how to configure. I a have tried all possible things
    from web but I am not able to do it. Is there any doc or links are much appreciated.
    Info: Some reason my oiddas web link is not working it used to work fine before and also the from /pls/orasso/ link I am not able to login may be because of my oiddas issue
    Thanks

    Hi Andreas,
    Thanks you for your help. I am trying to implement third party external LDAP authentication for APEX and Forms.
    So I started with OID and SSO setup to create external Partner Applications. Some reason my oid and sso web login links are not working. I didn't find any errors. I need some help in finding the problem and direction, I already read docs on web but no proper direction. I appreciate your help.
    Thanks

  • How to configure output for adobe forms in sap,,if i want to pront  an invo

    Hi,
    I used adobe forms in GTS.
    BUt in normal SAP system,i want to use adobe form to print an invoice data.
    I wantt o use the standard form and standard interface for that.
    But how to do configuration for this?
    normally for smartforms we do it in NACE transdaction?
    But for this adobe forms what is the driver program,,where to configure this form and interface.
    Thanks in advance,
    sasi

    Hello,
    it is the same way how you will configure for smart forms.
    Standard driver program is : RLB_INVOICE
    Please go through this link, how to configure print forms for invoice.
    http://****************/Tips/SmartForms/NACE/Configuration.htm
    Edited by: rakhi966 on Sep 9, 2011 9:22 PM

  • How to Configure Dreamweaver for localhost (using XAMPP)?

    I have just got Dreamweaver CS4 from a magzine, And do not know how to configure it. I had never done it before. Before I do any mistake please can anyone tell me what should I do in each of the step?

    http://www.adobe.com/devnet/dreamweaver/articles/first_dynamic_site_pt1.html

  • How to configure alerts for sender AS2 reports channel?

    Hi,
    We have configured sender AS2 reports channel to receive MDN back from our partner. Scenario is working fine and we are receiving MDN. How does "Enable alerts" option under Alerts Settings in Sender AS2  Reports channel work?
    I see following options, but dont know how to trigger an alert when we dont receive successful MDN back:
    Negative transmissionreport alert
    Negative delivery report alert
    Negative receipt report alert
    Has anyone trigger any kind of alrert and route them to an email for negative mdn?
    Regards,
    Riya Patil

    Hi Riya,
    I tried to use 'Enable alerts' option,but it didn't work.
    Please let me know if you get a success in this.
    Thanks.
    Regards,
    Shweta

  • How to configure alert when sender CChannel failes

    Hi PI Gurus,
    Is there is any way to get an alert when a sender channel fails (reason connection time out etc.).
    We have configured alerts for other scenarios when mapping is failing. How to handle the other situation.
    Regards,
    Krishna Chauhan

    Hi,
    Please check below urls.
    http://wiki.sdn.sap.com/wiki/display/XI/Alert%2bConfiguration%2bin%2bXI?bc=true
    ALRTCATDEF table SALRTCATUS
    http://help.sap.com/saphelp_nw04/Helpdata/EN/8a/3e2d4105f8d92be10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/96/f1033c128f4a7de10000000a114084/frameset.htm
    Thanks
    Ravi

  • How to configure the Http sender adapter

    Now i have look through the sap lib about the http sender adapter
    and i know the url is
    http://hostname:port/path?namespace=<...>
    &interface=<...>&service=<...>&cmd=T&loaderXML=< message object >&end=yes
    My questions are:
    1)the path in the URL is "/sap/xi/adapter_plain", if not, what is it?
    2)the message payload is right?
    any reply is appreciated
    Thank you very much

    Hi Leo,
    For a HHTP Scenario:
    DESIGN:
    1. Create DataTypes for source and Destinations. Create elements for all the text fields of your HTTP Client so that they can all be mapped into the destination file
    2. Create MessageTypes for the two datatypes.
    3. Create Message Interfaces. The One for HTTP is the sender, Asynchronous ( as no response is expected) and one for File is receiver, asynchronous.
    4. Do the mapping. It will be mostly a one to one mapping of the fields.
    5. Create the Interface Mapping.
    Configuration:
    1. Import your Business System under your Configuration Scenario.
    2. Create 2 communication channels. One for Http as a sender and one for your receiver say IDoc.
    Check these links for the configuration part.
    http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
    3. Do the Receiver Agreement for Idoc. HTTP doesn’t need a sender agreement.
    4. DO the Receiver Determination and Interface Determination.
    Weblog which talk about the same scenario:-
    /people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - although this weblog is
    aimed at explaining the sync-async bridge.. Sriram has taken http-to-file scenario as the example
    (use case) and explained it...
    Check this SDN tv demo, it has detail of HTTP adapter setup.
    https://media.sdn.sap.com/SDNTV/main.asp?mediaId=107
    Refer to this link for adapter settings.
    http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
    You should also have a HTTP client to send message to XI. In the connecting parameters to XI u have to use the URL in the pattern mentioned . U have to give all the configuration details in the URL.
    If you give me your mail id or if you can mail me at [email protected], i can send you a HTTP CLIENT.....In which you need to view the source code and change the username and password to send message to XI.
    Regards,
    Abhy

  • How to configure Mail to send from off-site

    I am trying to configure Mail on a laptop that will send and receive email both went it is connected to the servers ISP (on site) and when the laptop is connected to a non-site ISP. In other words when I am in the office I am connected to the ISP that is hosting my mail server. When I am out of the office and using an ISP that is not hosting the mail server. I have configured Mail such that I can send and receive email when I am onsite. When I am offsite I can receive email but not send it. In order to fix the problem I have tried configuring the SMTP to require password authentication using a couple of different server ports (i.e. 25, 110 & 587) but have been unable to send from off site. At this point I am at a loss as what to do. Any suggestions would be greatly appreciated.
    Mac Book Pro   Mac OS X (10.4.9)  
    Mac Book Pro   Mac OS X (10.4.9)  

    If the off-site ISP doesn’t let you send no matter what port you use, there is little, if anything, you can do about it. Many ISPs, however, only block port 25 for all traffic outside their own network. Something that usually works in those cases is changing the outgoing server port to 587 instead of 25 in Preferences > Accounts > Account Information > Outgoing Mail Server > Server Settings, but the outgoing server in question must listen to that port for this change to work.
    If the off-site ISP allows sending on port 587, but the outgoing server you want to use doesn’t listen to that port, you may solve the problem by using an independent authenticated SMTP server that allows sending from any mail account no matter where you are.
    A Gmail account, for example, would allow you to do this. Instructions for setting up a Gmail account are provided here:
    http://mail.google.com/support/bin/answer.py?answer=13275
    After setting up the Gmail account in Mail and checking that it works, you can use Gmail's SMTP server to send from your other mail accounts as well:
    1. Log into your Gmail account on the web.
    2. Go to Settings > Accounts.
    3. Enable the addresses you want to be able to send from, and let Gmail validate them by verifying that you do indeed own them.
    4. For each mail account you want to send from using Gmail’s SMTP server, in Mail go to Preferences > Accounts, and choose Gmail’s SMTP server from the Outgoing Mail Server (SMTP) popup menu.

  • How to configure queues for sending IDOCs from XI in the same order receive

    Hi,
       We are collecting IDOCs and sending them to XI using a background job (RSEOUT00) from R/3. When XI receiving these collected IDOCs, it's forwarding the received IDOCs into different queues for processing them and sending them to receiver system. Some times some queues are taking longer time to process the received IDOC and in the mean time the latest IDOC received getting processed and sent to receiver system. When the information related to this old IDOC is sent out to receiver system after the latest IDOC information is  sent to due to delay in Queue processing, we are getting errors in the receiver system. Can somebody explain the steps to configure queues to process the IDOCs in the same order they received from R/3.

    Hi,
    Why not tunnel all the IDOCs to one queue for processing ?
    Cheers
    Colin.

  • How to configure WLS to send HTTP access log to syslog under Solaris?

    I understand there is a way configuring WLS to use syslog via log4j. Is it possible only to direct HTTP access logs to syslog and keep the rest of logs in normal log files? Thanks!

    I've been following the "How to do UD Document" https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff and more specifically the document for Sybase  https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0d70315-958f-2a10-bc88-eb91e36f4037
    I am using the latest .jar file from Sybase http://www.sybase.com/detail?id=1002257
    When I navigate to http://<hostname>:50000//TestJDBC_Web/TestJDBCPage.jsp and Select connection name SDK_JDBC I get the following error message:
    Could not connect to database. Connection is inactive or does not support JDBC
    com.sap.ip.bi.sdk.exception.BIConnectionFailedException: Cannot open the connection
    Caused by: com.sap.ip.bi.sdk.exception.BIResourceException: Class DriverName is not found
    Caused by: java.lang.ClassNotFoundException: com.sybase.jdbc2.jdbc.SybDataSource
    Found in negative cache
    Loader Info -
    ClassLoader name: [connector:default]
    Parent loader name: [Frame ClassLoader]
    library:SYBASE
    Resources:
       /usr/sap/BWD/JC02/j2ee/cluster/server0/apps/sap.com/com.sap.ip.bi.sdk.dac.connector.sapq/connector/connectors/bi_sdk_sapq.rar/bi_sdk_sapq.jar
       /usr/sap/BWD/JC02/j2ee/cluster/server0/apps/sap.com/com.sap.ip.bi.sdk.dac.connector.jdbc/connector/connectors/bi_sdk_jdbc.rar/bi_sdk_jdbc.jar
       /usr/sap/BWD/JC02/j2ee/cluster/server0/apps/sap.com/cafbwadapterassembly/connector/connectors/cafbwadapterassembly.rar/sap.comcafbwadaptercaf.bw.adapter.jar
       /usr/sap/BWD/JC02/j2ee/cluster/server0/apps/sap.com/com.sap.ip.bi.sdk.dac.connector.xmla/connector/connectors/bi_sdk_xmla.rar/bi_sdk_xmla.jar
    Loading model: {parent,references,local}
    Any thoughts/insites?
    Thanks, Steve

  • How to configure dreamweaver for CodeIgniter Project ?

    Hello ,
    is it possible to configure DW in order to work with CodeIgniter ???
    if yes , please did you know how to do that , I begin
    thanks

    As far as I know there is no code-hinting available for CodeIgniter in DW.

  • How to configure alert to send a mail

    Hi,
      I want to trigger an email when ever a particulare alert rule is ok. I have to send the internet mail. Can anybody help me in this regard. Thanks in advance.
    Thanks,
    Mallikarjun.M

    Hi,
    If you have already configured the alert rules then you
    just need to configure SAP connect and maintain the e-mail address for all the users attached to your alert category. You can go to transaction SU01 and maintain e-mail address for the each user attached to the alert category and the e-mails will automatically be sent if SAP connect is configured.
    Refere the link below for SAP connect configuration..
    http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
    Regards
    Anand

  • How to configure SMTP dynamic send port?

    Hi,
    I am trying to configure STMP send port to send emails, enabled SMTP Server on the DEV box and configured it as described in the link below.
    https://sandroaspbiztalkblog.wordpress.com/2013/05/09/biztalk-2013-installation-and-configuration-install-and-configure-smtp-server-feature-part-4/
    Able to send emails using Telnet client, and these email get stored in C:\inetpub\mailroot\Queue folder.
    I have a dynamic send with following values.
    msgEMail(SMTP.CC) = “[email protected]”;
    msgEMail(SMTP.DeliveryReceipt) = False;
    msgEMail(SMTP.From) = “[email protected]”;
    msgEMail(SMTP.ReadReceipt) = False;
    msgEMail(SMTP.Password) = “XXX;
    msgEMail(SMTP.Username) = “DDD”;
    msgEMail(SMTP.SMTPAuthenticate) = System.Convert.ToUInt32(XX.SMTPAuthenticate);
    msgEMail(SMTP.SMTPHost) = “smtp.domain.local”;
    msgEMail(SMTP.Subject) = “sdfgdfgd;
    msgEMail(SMTP.MessagePartsAttachments) = 2;
    Message gets suspended with the following error message.
    A message sent to adapter "SMTP" on send port "XXX_DynamicSendPort_XXXX" with URI "mailto:
    [email protected]" is suspended.
     Error details: There was a failure executing the send pipeline: "Microsoft.BizTalk.DefaultPipelines.XMLTransmit,
    Microsoft.BizTalk.DefaultPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=81bf3856ad764e35" Source: "XML assembler" Send Port: "XXX_DynamicSendPort_XXXXX URI: "mailto:localhost" Reason: Data at the root level is invalid.
    Line 1, position 1. 
     MessageId: 
    {3C50F418-24C4-4661-9B34-4B7F5F6FBBA4}
     InstanceID: {2F6B9A0E-92EE-4953-81D2-9A124FAC99CE}
    Please can some advise me what is wrong here? do you think I have configured
    msgEMail(SMTP.SMTPHost) property correctly? Or should it be the name of the DEV box?
    Thanks
    SS
    Shiva Sadayan

    Hi Shiva,
    You should not be using XMLTransit pipeline at the send port.
    Perhaps you should go with default passthrough pipeline or
    Create a send pipeline with MIME/SMIME encoder and drop it at Encode section of pipeline. Accept the default settings for MIME/SMIME encoder and use it with the dynamic port.
    I found this article very useful while sending email from BizTalk. Refer:
    Sending Emails in Biztalk
    Rachit
    Please mark as answer or vote as helpful if my reply does

  • How to configure "Maximum concurrent sending" and "Retry settings" via scripting

    I am trying to configure the Sender settings for my secondary sites from the Secondary site properties. I could not find a cmdlet which configures the "Maximum concurrent sending" or the "Retry settings". Does anyone know of a PowerShell
    or VBscript method of configuring these settings?

    That information should be stored in the Site Control File and to edit that file have a look at this article:
    http://msdn.microsoft.com/en-us/library/hh948978.aspx
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

Maybe you are looking for