How to configure E-Mail servers in SAP?
Dear All,
| have configured e-mail server in R/3 properly (using SCOT tcode). However, when I am trying to send mails for testing purpose (using SBWP tcode), its showing status as "send process still running". But after some time, its showing status as "error during send process"
can any one please help me troubleshoot this problem? Should you need any information, kindly let me know.
Waiting for your kind immediate responses!
Regards,
Faisal
Hi Brahmankar,
I have gone through the notes and links you have sent me. Its very helpful and informative as well. Following are my observations and understandings:
1. As I mentioned, we are on 4.6C , therefore tcode SICF is not executable to activate SAPConnect service. Its only available on WAS.
2. I think I have to make use of SAP EXCHANGE CONNECTOR if its R/3 4.6C. Then only I will be able to configure SMTP mail server. Because,
note#122657 says that:
if you are using SAP system based on WAS 6.10 or above then you should use the SAPconnect (E)SMTP
linkage for the exchange connection. You no longer need to install the SAP Exchange Connector
3. Can you please confirm that I have to use SAP Exchange Connector to configure SMTP mail server?
4. There is not SMTP node in tcode SCOT ! Only I get FAX and INT nodes. How to get the SMTP node?
you said that:
If you are running Exchange Server 2003, and 4.6C it will be tricky.
could you please guide and help me in making this process tricky ?
That would be a very great help and I am looking forward to have your kind help for the same!
If you need any other information from my side, kindly let me know.
Thanks and Regards,
Faisal
Similar Messages
-
How to configure the mail in Sales Support of SAP SD
Hi,
Experts I have one scenario in my co. that we have 300 users we have to send the mails to our 300
users for every 2 or 3 months once. Regarding new promotions (Discounts , Price changes) of
company. For this every time we are changing the sold to party in quotation and taking printouts then
sending to our users its a lengthy procedure, to avoid this long time very soon we are going to
implement SAP SD Sales Suppor in our company is there any functionality in SAP to send mail at
once to our 300 users may i know about how to configure the mail for this scenario.
Thanks and Regards
MHHi Prashant,
Thanks for you immediate responce, Can you give me the configuration steps in detail.
Thanks and Regards,
MH -
How to configure Sendmail mail relay with authentication
Hi,
How to configure send mail relay. Client gave us smtp host,port, username and password. We have a couple of server. If we configure the relay in any one of the server other servers able send mails using relay server. Please help me on this?.Create an IT Resource of Type Mail Server. Give Name as "Email Server.Now populate the values for all the parameter for example Server,username,password and authentication type.
.Go to System Configuration and in Email Server property value give the name of IT resource you created in step1 so the name will be "Email Server".
http://forums.oracle.com/forums/messageview.jspa?messageID=3867506&stqc=true -
How to configure sender mail adapter
Hi,
My scenario Mail-XI-file. In adapter monitoring it is giving me error "not initialized: mail agent null". What do we exactly mean by this??
and can anyone suggest any blog as how to configure sender mail adapter.
Kindly help
Anu SinghalHi Anu,
Just check this link
http://help.sap.com/saphelp_nw04/helpdata/en/6b/4493404f673028e10000000a1550b0/frameset.htm
and this 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05
Rewardif helpful
Reagards
Sachin -
How to Configure E-mail and Chat functionalities
Dear all,
How to configure E-mail and Chat functionalities for IC Webclient.
through IC Webclient ICI interface how can we configure E-mail functionality, As per my understanding, E-mails can be handled in a similar way of receiving phones.
Where these E-mails can be stored?, Where we define agent E-mail id?
being ICI is a multi channel support does it need SMPT server support? If No, would there be any difference in the functionality?
How does CHAT functionality works?
Please educate in above scenarios to get a better understanding.
Your help will be highly appreciated.
Best wishes
Raghu ramDo you make any effort to search for your answers before you post your questions? ERMS is the email response system
The 2nd post on this board - Documentation for Interaction Center (IC) WebClient
There is tons of stuff here to answer your questions as well as show you the configuration. You need a 3rd party CTI solution to do chat that you will read about in the blog.
SAP Notes
759923 Frequently Asked Questions about IC WebClient
940882 Frequently Asked Questions about ERMS
882653 Frequently Asked Questions about Agent Inbox
1114557 SAP CRM 2007 Internet Browser Releases
1118231 Supported user interfaces for SAP CRM
981710 Support for Microsoft Internet Explorer 7.0
1144511 Blank screen when starting CRM WebClient or IC WebClient
1115493 CRM Web UI: Mandatory SICF services for CRM framework
992848 Mandatory ICF nodes for CRM WebClient UI Framework
IC WebClient Consultant Cookbook for CRM 2005
Online Documentation
Online Knowledge Products
Blog: How to Configure Contact Center Simulator User Interface (CCSUI)
Blog: What is Computer Telephony Integration (CTI) -
How to configure bulk breaking articles in SAP retail
hi frnds...
This is my client needs...
How to configure bulk breaking articles in SAP retail for hyper market..
Scenario is like this... Ex: for MEAT
There should be a Parent article & child articles process.
i.e Chicken X - 100 corcoss is divide into child articles (A,B,C,D,E,F) like
Brest bone - 5kg - A
leg pieces - 2.5kg - B
wings - 2.5kg - C
P - 7.5kg - D
Q - 10kg - E
R - wastage - 50kg - F
these child articles wont consider for inventory
So how to configure this scenario in SAP Article master & to run this process.
Pl help me out with scenarioPlease have alook at
[http://help.sap.com/erp2005_ehp_03/helpdata/en/2b/b03889df3611d1953b00a0c930e0da/content.htm]
Material type WERT is correct.
In Material type maintenance you can control at all if a store will be value only inventroy managmenet or both.
Further in the Site master WB02, you can control it on MC level.
regards
B -
How to Configure a mail server with OIM
Experts ,
Any idea/links/Docs on how to configure a mail server with OIM and to send mail notification to someone .
Pardon me, if my questions seems to be incomplete .
Thanks
Suren.Create an IT Resource of Type Mail Server. Give Name as "Email Server.Now populate the values for all the parameter for example Server,username,password and authentication type.
.Go to System Configuration and in Email Server property value give the name of IT resource you created in step1 so the name will be "Email Server".
http://forums.oracle.com/forums/messageview.jspa?messageID=3867506&stqc=true -
How to configure send mail ?
Hi,
How to configure send mail ?
O/S is OEL-5.8 64-bit.
Thanks.Sendmail uses the M4 macro processor to compile the configuration files. There is no GUI, if that is what you are looking for.
The configuration depends on what you want to accomplish and how email needs be routed in your environment.
You can find many tutorials and scenarios in Google: -
How to configure bt mail with icloud?
how to configure bt mail with icloud?
iCloud does not handle any mail systems except for its own. BT is not an iCloud mail system, so you can't.
-
How To Configure E52 Mail Box
Can't excess Email in Mail boxHey Hitesh_Motee,
Welcome to the Nokia Forums!
Have you managed to sync your e-mail at any point and only recently stopped or never work to begin with? Also what e-mail provider are you using?
I suggest first of all you should contact the email provider to be sure you have all the correct configuration settings for the e-mail account.
You can also try perform a soft reset *#7780# security code 12345 by default if prompted. This will restart all your phone settings to as they where out of the box, but will not delete any of your data.
Let me know how you get along.
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you! -
How to configure GB P60s in the SAP Portal?
How to configure GB P60s in the SAP Portal, so that they can be viewed and printed/reprinted by the employee themeselves? Will HMRC accept P60s printed on any stationeries? Also, Client does not want employee address to be available in the address section, but just the office location.
Hello
Please refer SAP note 1542870 -Electronic P60 ,where HMRC have given employers the option of providing an electronic P60 to their employees.
Please let us know incase you know any further information.
Thanks and Kind Regards
Ramana -
Configure e-mail servers?
I'm at the library and trying to send OUT e-mail but it says the servers aren't correct. I can recieve mail, just not send. It says I can configure the mail servers in settings/email but I see no place for this. Please help.
I'm wondering if it's password related because it keeps saying that mail won't work because the password is wrong. However, when I go to the iCloud account it says password is fine.... There is also more than one iCloud listed in my mail, which only confuses matters more... Each of them seems to have the right password.
I used to have Apple ".me mail" which I could login and access straight from the net. Now I guess it's called iCloud but when I go to iCloud.com it forces you to download to your device. Is there no way to read/write icloud email via the Internet anymore? -
How to configure e-mail to forward to outlook 2007
I am looking for help in how to configure my Verizon.msn.com e-mail to forward to outlook 2007. Currently my e-mail is forwarded from Verizon to my msn e-mail address.
Do you make any effort to search for your answers before you post your questions? ERMS is the email response system
The 2nd post on this board - Documentation for Interaction Center (IC) WebClient
There is tons of stuff here to answer your questions as well as show you the configuration. You need a 3rd party CTI solution to do chat that you will read about in the blog.
SAP Notes
759923 Frequently Asked Questions about IC WebClient
940882 Frequently Asked Questions about ERMS
882653 Frequently Asked Questions about Agent Inbox
1114557 SAP CRM 2007 Internet Browser Releases
1118231 Supported user interfaces for SAP CRM
981710 Support for Microsoft Internet Explorer 7.0
1144511 Blank screen when starting CRM WebClient or IC WebClient
1115493 CRM Web UI: Mandatory SICF services for CRM framework
992848 Mandatory ICF nodes for CRM WebClient UI Framework
IC WebClient Consultant Cookbook for CRM 2005
Online Documentation
Online Knowledge Products
Blog: How to Configure Contact Center Simulator User Interface (CCSUI)
Blog: What is Computer Telephony Integration (CTI) -
How to configure multiple smtp servers per domain
Hi,
how do we configure multiple smtp servers per domain/corporate in iplanet messaging server 5.2. i wanted to do this so that i can configure some domains with virus scanning and some domains without antivirus.Hi Martin,
Well we are trying to run a report without exactly specifying the name of reports server anywhere, e.g. in database or in form or anywhere else. Now if I do not supply a reports server name using RUN_REPORT_OBJECT, the error it displays is FRM-41211: Integration Error : SSL failure ... However if I specify the reports server name in the form, the reports run perfect. Also the name of reports server is specified in rwservlet.properties.
Now the question goes as follows:
Can I run my report from Form without specifying the name of the Reports server anywhere at all. This is so because either an in-process reports server should be picked or the one which is entered in rwservlet.properties should be pickec up by default. Please correct us if we are wrong. once we are through with it, we have to move to Oracle 10gR2 concept of reports server.
Thanks in anticipation,
Ruchi/Saurabh -
How to configure multiple report servers in Oracle 10 G R2?
I want to configure multiple report servers with my application deployed on Oracle 10G R2. Since R2 does not support report server clustering, how can this be achieved without any change in the application?
Currently, the application is running with single report server.Hi Martin,
Well we are trying to run a report without exactly specifying the name of reports server anywhere, e.g. in database or in form or anywhere else. Now if I do not supply a reports server name using RUN_REPORT_OBJECT, the error it displays is FRM-41211: Integration Error : SSL failure ... However if I specify the reports server name in the form, the reports run perfect. Also the name of reports server is specified in rwservlet.properties.
Now the question goes as follows:
Can I run my report from Form without specifying the name of the Reports server anywhere at all. This is so because either an in-process reports server should be picked or the one which is entered in rwservlet.properties should be pickec up by default. Please correct us if we are wrong. once we are through with it, we have to move to Oracle 10gR2 concept of reports server.
Thanks in anticipation,
Ruchi/Saurabh
Maybe you are looking for
-
Pop-up windows from the portal showing address bar
Hi, I am not sure where to post this thread, but here goes. My client has the CRM web UI which has been integrated into SAP Portal 7.3. I am not aware of how this is done as I am not familiar with CRM. The issue being faced is that when a user tries
-
I have Mac mini 2.0/2x2gb/2x500/AP/BT, and i forgot the username and the password. How can I resolve this problem?
-
Hi I just got modem, I am in a velocity estate - all seems to work but how do I activate?
-
None of the plugins work with the latest version (3.6.15)
Firefox updated to version 3.6.15 the other day and none of my addons work any longer, including a toolbar, Web of Trust, NoScript, FlipClock, DownloadHelper and several others, they all simply ceased functioning.
-
Cache Connect Oracle Database Support
What versions of the 10g Oracle Database server are supported by Cache Connect for TimeTen 7.0.4 & 7.0.5? The TimesTen 7.0.4 & 7.0.5 Installation Guide lists that 10gR1 & 10gR2 are supported. What about 10gR3 & 10gR4 for TimesTen 7.0.4 & 7.0.5? Thank