How to configure ECM Survey Codes in T71JPR02?

Greetings,
Does anyone know how you configure Survey Codes in ECM - Start Job Pricing (PECM_START_JPR_BSP)? This information goes into table T71JPR02.
I have my Survey Provider codes defined. I'm on the Import Data step for the Survey Market Data. The dropdown field Survey Code has no values. This doesn't appear to come from the actual Import File.
Thank you!
Jay Crowley

Dear,
For activating the change number as mandatory. Do following things
Go to OP5A -> PP task list: initial screen -> Change number-> Modified -> Transaction code select required radio button and save it.
Check and revert back
Regards / US

Similar Messages

  • How to configure Two Tax Codes for single line item in work order

    Hi All,
    Please do Review the below scenario and tell me how to solve it.
    A) Certified Work Done Gross Bill Amt      100,000      
    Total Work Done Value      100,000      
    Less : Labour & Like Charges @ 30 % on Rs 100,000 =  30,000      
    Vat applicable Amount =      70,000      
    Add VAT @12.5%  Chargeable on Taxable Turnover of Rs. 70,000.00     = 8750
    Total Bill Value = 108750
    Service Tax @ 12.36% on 33% Value of Rs. 100000     = 4079
    G.Bill Amt = 112829
    Total Amt Due for Payment = 112829

    HI,  There is a possible solution for this scenario.
    1. Create 2 tax codes for VAT and SERVICE Tax at 12.5% and 12.36% respectively
    2. While posting the Invoice (TRX - FB60) following steps need to be followed.
    3. Amount has to be split into two line items
    4. Ist Line Item should have the Vat amount + 70000/- and select relevant tax code that was
        created for 12.5%
    5. Similarly 2nd Line Item should have Service Tax amount + 30000/- and select relevant tax code that    
        was created for 12.36%.
    Hope this would meet your requirement. If the solution is okay, kindly indicate the points.
    Regards
    K.Sanjai Babu

  • How to configure ECM for routing

    Friends
    I need to make Change Number as mandatory for transaction CA02. I am trying to make field Change Number as required field in transaction OP5a/b, but it is either making mandatory to CA01/CA02 and even CA03 or nothing is happening.
    I will appreciate if  some one can gyide  me  the correct steps for making chnage number as mandatory for CA02 only will be great

    Dear,
    For activating the change number as mandatory. Do following things
    Go to OP5A -> PP task list: initial screen -> Change number-> Modified -> Transaction code select required radio button and save it.
    Check and revert back
    Regards / US

  • How to configure Use tax in the system

    Hi ,
    As in use tax , the tax amt should be paid by the buyer  to the govt... we r using taxware... so let me know how to configure the tax codes.. normally the entries will be expenses dr, tax dr and the full amt will go to vendor cr.... but here the vendor amt should be exclusive to the tax amt.... please let me know the process..
    Thanks

    Hi,
    Muscan in this scenario whenever you are posting the invoice for the vendor you may get the field called EDITING OPTIONS from there u can select check box of calculate taxes on net amount in the general entry options tab.
    I hope it will helpful to you................

  • CIN configuration for rejection codes

    Dear all,
    We reject the incoming excise invoice at the time of posting, with the duties debited to cenvat on hold account. How to configure the rejection code for it to post the duties to cenvat on hold account?
    Pls tell me the rejection code posting indicator and rejection code used?
    Regards.
    Milind

    Hi,
    Go to SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Maintain Rejection Codes
    - In this IMG activity, you define the rejection codes that are used in the Incoming Excise Invoices transaction.
    - For each rejection code, enter a code and a description. You can also specify value as X in Post Ind column whether the excise duty in the invoice is to be posted to the CENVAT on hold account, instead of the CENVAT clearing account.
    Function of Post Ind active is to Post Excise Duty to CENVAT on Hold Account: - Specifies that when you assign the rejection code to an excise invoice, the system posts the excise duty to the CENVAT on hold account when you come to post the excise duty.
    Procedure: -
    1. A vendor sends you an excise invoice that, for some reason, you cannot accept.
    2. You capture the excise invoice in the Incoming Excise Invoices transaction as normal, but you assign it a rejection code.
    3. You then post the excise on the excise invoice to the CENVAT account. The system credits posts the excise to the CENVAT clearing account,as normal, but instead of debiting the excise duty accounts, it debits the CENVAT on hold account.

  • Need Help: How to configure/set-up custom interchange code values in B2B

    Hello All,
    Hope everybody is doing well.
    We are currently facing a problem in implementing Inbound 850 Purchase Orders in B2B from one of our Trading Partners (Customer).
    The Customer will be sending us EDI ANSI X12 ver 4010 Purchase Order files, but in the file they are sending a custom GS08 (8th element of GS Segment having Version/Release/Industry Identifier Code) value i.e. "004010RIFMAT".
    The above value is not present in the Standard Code values when we define an ECS using B2B Document Editor.
    Hence the document is failing in B2B since it is not able to identify the Trading Partner.
    If anyone has faced similar issues, I would appreciate if you could let me know on how to configure the same in B2B. Please let me know the steps in detail.
    Thanks In Advance.
    Regards,
    Dibya

    Hello Dibya,
    Can you create a new group ecs with appropriate codelist for GS08 and use it while modelling B2B flow. Make sure to undeploy and validate the agreement.
    Rgds,Ramesh.

  • How to configure Funds Transfers, Cross Company Code Vendor Payments, Bill

    Hi All,
    Can any one help me, How to configure Funds Transfers, Cross Company Code Vendor Payments, Bill of Exchnage Payments with Automatic Payment Program?
    Regards
    Chandra

    Hi Chandra,
    This is what you need to do to configure <b>Cross Company Code Vendor Payments</b>.
    Execute transaction code <b>OBYA</b>, when prompted, type in 1st coy code, say A and then 2nd coy code, say B. This would take you to the "<b>Maintain FI Configuration: Automatic Posting - Clearing Accounts</b>" screen.
    In the first frame, where you have
    Posted in : A
    Cleared Against : B
    Under Receivable
    Debit Posting Key : <b>01</b>
    Account Debit : Account Number (The account can be a G/L account, a customer account or a vendor account)
    Under Payable
    Credit Posting Key : <b>31</b>
    Account Credit : Account Number (The account can be a G/L account, a customer account or a vendor account).
    In the second Frame
    Posted in : B
    Cleared Against : A
    Under Receivable
    Debit Posting Key : <b>01</b>
    Account Debit : Account Number (The account can be a G/L account, a customer account or a vendor account)
    Under Payable
    Credit Posting Key : <b>31</b>
    Account Credit : Account Number (The account can be a G/L account, a customer account or a vendor account).
    So, if you are using the <b>Customer/Vendor</b> approach, company A must be set up as both a Customer(Use Txn Code <b>XD01</b>) and a Vendor(USe Txn Code <b>XK01</b>) in Company B and vice versa.
    Once you have completed this set-up, you can then use transaction <b>F.13</b> and/or <b>F13E</b> to carry out your automatic clearing. Alternatively, whenever Payment Run is executed via transaction code <b>F110</b>, this would automatically clear out the payables and receivables in each company code.
    However, if you intend to use the G/L approach, then the account numbers would be Inter-coy G/L account for each coy code as defined in the chart of accounts.
    I hope the above helps.
    Do not forget to award the points please.
    Regards,
    Jacob

  • How do I eliminate backslash codes from configuration files?

    I am trying to make my LabVIEW software compatible with software written in Delphi (Pascal). To help accomplish this task, I want them to share the same ".ini" files. That way, you start one program up and you get the settings that you had the last time you ran the other program. But here's the problem...
    Using the configuration file VIs, LabVIEW saves paths as:
    [Section with path]
    PathKey=C/path/to/file
    But Delphi saves paths as:
    [Section with path]
    PathKey=C:\path\to\file
    I thought of a simple workaround - just convert paths to strings before writing the config file! But, alas, LabVIEW uses backslash codes when it writes strings to config files, i.e.:
    [Section with path]
    PathKey=C:\\pat
    h\\to\\file
    The LabVIEW configuration file VIs' code are viewable and can be edited, but I have not had luck figuring out exactly where the backslash codes ever originate. Does anyone know how to fix up the code for these VIs? Or can you think of another workaround?
    I already thought of writing a dll that would package the Delphi functions for working with .ini files. Then I could use a library function node to call the Delphi functions. Doing so would certainly eliminate my problem of conflicting formats. But jeez - doesn't that sound like entirely too much work???
    Thanks,
    Nick
    "You keep using that word. I do not think it means what you think it means." - Inigo Montoya

    There is an option in the VI for writing strings to configuration VIs which allows you to write the exact strings (no more double \). It`s called "Write original string" I think (I`ve translated this directly from my german version of LabVIEW. I use this quite a lot to allow a "normal" PC user to edit configuration files by hand if neccessary.
    Shane.
    Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2)

  • How to configure "industry code "

    Hi,
    pls tell me how to setup a  industry code for a new Agency for the XYZ consumer market.
    Points Assured!
    Thanks
    Ruchi

    Dear Ruchi
    Sorry I am not clear what you are asking.  Do you want to create a new "Industry Sector" which will be used while creating material??
    If so, you can add in <b>OMS3</b>.
    Thanks
    G.Lakshmipathi

  • How to configure drop-down that change dynamically in Call Scripts

    Hi,
    Would like to know as how to configure drop-down choices that change dynamically based on customer response in Call Scripts / Assessment Scripts of type "Service Request - Survey".
    I've read the following from CRM OnDemand pdf but was not able to figure out how to do that.
    Call Scripting:
    • Reduces agent training time
    • Provides drop-down choices that change dynamically based on customer response
    • Supports personalized interactions based on existing record data
    • Facilitates up-selling and cross-selling
    • Does not require third-party software
    I don't have a concrete requirement as of now, but was trying to check as how it works. Please guide me if any one has implemented the same.
    Thanks in Advance,
    Cheers!!!
    Deepak Veeravalli.

    Arun,
    If you plan to implement the "Querying the Active Directory" based on my code snippet,
    and if you do not have permission [your account must be the part of domain admin] to do so,
    Then still you can do it in least effort through code,
    string usersInXml = SPContext.Current.Web.AllUsers.Xml;your xml string look like this.
    <Users><User ID="2" Sid="" Name="Administrator"
    LoginName="i:0#.w|murugesan\administrator" Email="" Notes="" IsSiteAdmin="True" IsDomainGroup="False" Flags="0" /><User ID="1" Sid="" Name="Murugesa Pandian" LoginName="i:0#.w|murugesan\murugesan" Email="" Notes="" IsSiteAdmin="True" IsDomainGroup="False" Flags="0" /><User ID="1073741823" Sid="S-1-0-0" Name="System Account" LoginName="SHAREPOINT\system" Email="" Notes="" IsSiteAdmin="False" IsDomainGroup="False" Flags="0" /></Users>
    You can user Linq to XML to filter the "LoginName,Name and Email and then populate your drop down list.
    * User must be logged into the site at least once.
    Murugesa Pandian.,MCTS|App.Devleopment|Configure

  • How to use the t-code vf31 tor taking print out of invoice

    Hi,
      How to use the t-code vf31 for taking print out,am getting an error like no message for initial processing exist,
    venu

    Hi,
    Please find the steps
    Output type                     RD00
    Transmission medium             1
    Sort order                      01
    Processing mode                 1
    Please give the oppropriate fields,
    if the still error persists  check the configuration in NACE transaction code.
    thanks
    Kuntla

  • How to configure the web interface of service desk

    Hi All,
    We are currently doing a configuration on solman service desk. I am on a stage where in i need to use the web interface of service desk via tcode notif_create_bsp. However, every time i call the transaction code (call the url) i cant view the web. Only an error the "Network Access Message: The website cannot be found".
    I already activate needed services and already publish
    SIAC_PUBLISH_ALL_INT but it still doesnt work.
    I might have missed some configs/procedure on how to do it correctly.
    My questions are.
    1. How am i going to know the qualified domain name
    of the Web AS for solman? How to configure it?
    2. Can anyone give me some guide and any step by step documentation/procedure on this.
    You help/suggestion will be very much appreciated
    Thank you very much,
    Ice

    Hi,
    +"Check the following 2 things. See if the port 8000 is open and in the url for the BSP in internet explorer, replace the host name with the IP address of your Solman server.+
    +"+
    That was a helpful tip. I change the host name with the ip address ofour solman server. However, upon login, it promts me to enter username and password. I've tried to login using my solman password but it shows an error like this.
    Business Server Page (BSP) error
    What happened?
    Calling the BSP page was terminated due to an error.
    SAP Note
    The following error text was processed in the system:
    Die URL enthält keine vollständige Domainangabe (10.123.161.125 statt 10.123.161.125.).
    Exception Class CX_FQDN
    Error Name 
    Program CX_FQDN=======================CP
    Include CX_FQDN=======================CM002
    ABAP Class CX_FQDN
    Method CHECK
    Line 10 
    Long text -
    Error type: Exception
    Your SAP Business Server Pages Team
    Is there anything i need to configure so that i can maintan the username and password?
    Thank you for your assistance,
    Ice

  • How to configure Automatic Account Clearing for A/R

    Hi,
    Kindly advice me how to configure  Automatic Account Clearing for A/R
    The client requirement is
    In A/R the customer accounts are not automatically clearing when a payment is posted for that account. We are still seeing all open items and all paid or cleared items when we go to FBL5N and select open items for viewing. Please make account clearing automatic for customer payments.
    Thanks in advance
    Sunitha

    Hi,
    Use T code OB74.
    Maintain for your Chart Of Account, acct type "D", From and to customer accounts and then add the critera you want. Pls note you cannot define more than 5 criteria.
    Then schedule the clearing program job F.13 in the background.
    Cheers.

  • How to configure users for internal mail routing only in exchange 2013

    Hi Guys!
    I have a scenario here that i have three (3) group of users, one group is able to have an inbound and outbound mail, meaning they can send and recieved emails from internal and external.The second group of users should have inbound mail(local mail) only
    (cannot send and recieved mails from internet), and the third (3) user is they can recieved an outbound mail but they are not allowed to send mail directly to the client,(Ex.
    [email protected],[email protected],[email protected]) instead they will use the
    [email protected] as the reply to the client. Please let me know how to configure group user 2 and 3.
    Thank you.
    regards,
    Paul

    Hi Paul,
    Great advice from Maganti, just elaborating steps:
    Prevent Group 2 send e-mail to internet by transport rule:
    1. Login EAC with administrator, Mail Flow---> Rule, click “Create a new rule, then give a name “Group2 - No Internet Mail”.
    2. Conditions: select "From a member of a distribution list" & select group "Group2"
    3. Select another condition "Sent to users inside or outside the organization" & Select Outside.
    4. Actions: select "send bounce message to sender with enhanced status code" & write your custom message like “You are not authorized to send mails to internet”.
    Prevent Group 3 directly send e-mail to internet, however it can send message as group:
    We also can create a transport rule which is same with Group2, then open Active Directory Users and Computers to add send as permission with another group (contain same users as group3).
    Best Regards,
    Allen Wang

  • [Forum FAQ] How to configure a Data Driven Subscription which get multi-value parameters from one column of a database table?

    Introduction
    In SQL Server Reporting Services, we can define a mapping between the fields that are returned in the query to specific delivery options and to report parameters in a data-driven subscription.
    For a report with a parameter (such as YEAR) that allow multiple values, when creating a data-driven subscription, how can we pass a record like below to show correct data (data for year 2012, 2013 and 2014).
    EmailAddress                             Parameter                      
    Comment
    [email protected]              2012,2013,2014               NULL
    In this article, I will demonstrate how to configure a Data Driven Subscription which get multi-value parameters from one column of a database table
    Workaround
    Generally, if we pass the “Parameter” column to report directly in the step 5 when creating data-driven subscription.
    The value “2012,2013,2014” will be regarded as a single value, Reporting Services will use “2012,2013,2014” to filter data. However, there are no any records that YEAR filed equal to “2012,2013,2014”, and we will get an error when the subscription executed
    on the log. (C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles)
    Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportParameterException: Default value or value provided for the report parameter 'Name' is not a valid value.
    This means that there is no such a value on parameter’s available value list, this is an invalid parameter value. If we change the parameter records like below.
    EmailAddress                        Parameter             Comment
    [email protected]         2012                     NULL
    [email protected]         2013                     NULL
    [email protected]         2014                     NULL
    In this case, Reporting Services will generate 3 reports for one data-driven subscription. Each report for only one year which cannot fit the requirement obviously.
    Currently, there is no a solution to solve this issue. The workaround for it is that create two report, one is used for view report for end users, another one is used for create data-driven subscription.
    On the report that used create data-driven subscription, uncheck “Allow multiple values” option for the parameter, do not specify and available values and default values for this parameter. Then change the Filter
    From
    Expression:[ParameterName]
    Operator   :In
    Value         :[@ParameterName]
    To
    Expression:[ParameterName]
    Operator   :In
    Value         :Split(Parameters!ParameterName.Value,",")
    In this case, we can specify a value like "2012,2013,2014" from database to the data-driven subscription.
    Applies to
    Microsoft SQL Server 2005
    Microsoft SQL Server 2008
    Microsoft SQL Server 2008 R2
    Microsoft SQL Server 2012
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    For every Auftrag, there are multiple Position entries.
    Rest of the blocks don't seems to have any relation.
    So you can check this code to see how internal table lt_str is built whose first 3 fields have data contained in Auftrag, and next 3 fields have Position data. The structure is flat, assuming that every Position record is related to preceding Auftrag.
    Try out this snippet.
    DATA lt_data TYPE TABLE OF string.
    DATA lv_data TYPE string.
    CALL METHOD cl_gui_frontend_services=>gui_upload
      EXPORTING
        filename = 'C:\temp\test.txt'
      CHANGING
        data_tab = lt_data
      EXCEPTIONS
        OTHERS   = 19.
    CHECK sy-subrc EQ 0.
    TYPES:
    BEGIN OF ty_str,
      a1 TYPE string,
      a2 TYPE string,
      a3 TYPE string,
      p1 TYPE string,
      p2 TYPE string,
      p3 TYPE string,
    END OF ty_str.
    DATA: lt_str TYPE TABLE OF ty_str,
          ls_str TYPE ty_str,
          lv_block TYPE string,
          lv_flag TYPE boolean.
    LOOP AT lt_data INTO lv_data.
      CASE lv_data.
        WHEN '[Version]' OR '[StdSatz]' OR '[Arbeitstag]' OR '[Pecunia]'
             OR '[Mita]' OR '[Kunde]' OR '[Auftrag]' OR '[Position]'.
          lv_block = lv_data.
          lv_flag = abap_false.
        WHEN OTHERS.
          lv_flag = abap_true.
      ENDCASE.
      CHECK lv_flag EQ abap_true.
      CASE lv_block.
        WHEN '[Auftrag]'.
          SPLIT lv_data AT ';' INTO ls_str-a1 ls_str-a2 ls_str-a3.
        WHEN '[Position]'.
          SPLIT lv_data AT ';' INTO ls_str-p1 ls_str-p2 ls_str-p3.
          APPEND ls_str TO lt_str.
      ENDCASE.
    ENDLOOP.

Maybe you are looking for