How to configure edit mode in SAP screen help(F1)
Hi ,
We want to enable customization option in SAP screen.
When i open any screen in SAP , we use F1 option for help, there we will see technical options , application help and all..
In this options we have customization showing in display mode only, we need to change this option to change mode.
Please let me know asap. find screen shot below.
Hi Reagan,
You're true, my mistake, thanks for checking.
This might be an orphan thread after all that time... let's hope easwer rao
will still be there.
easwer rao please mark the thread as answered, setting Aleh Mikhniuk's answer as correct
Thanks
Similar Messages
-
How to change the color of SAP screen?
Hi Frens,
I know it has nothing to do with SD Community, but still I am asking. Can anyone tell me "How to change the color of SAP screen?" It is needed especially when you are working on System Landscape including PRD, Qua & Dev. There are chances that you end up making a test case in PRD instead of Dev or Qua. To avoid that, different color of SAP screen may be very useful and safe.
Regards
Vikas Chhabra
SD/CIN ConsultantWe had a clone of SAP for testing
Only GUIXT solution was available for users to distinguish between real Prod & Clone as SID was same
Created 2 scripts n C:\guixt\scripts
saplsmtr_navigation.e0100.txt
Esession.txt
BOTH having identical code
if V[_ashost=10.3.3.18]
TitlePrefix "CLONE18"
TitleSuffix "(CLONE8)"
endif
if V[_ashost=10.3.3.25]
TitlePrefix "PROD25"
TitleSuffix "(PROD25)"
endif
After much research - this was only solution.
GUIXT will be around; like SAPSCRIPT & SMARTFORMS
despite the enticement of Adobe Forms!
After some time you may set GUIXT profile start window HIDDEN
This you do by clicking profile button of GUIXT menu
If you want to see GUIXT Window again
CMD.exe Dos prompt
cd C:\Program Files\SAP\FrontEnd\SAPgui
guixt visible
Regards
Jayanta Narayan Choudhuri
Kolkata
URL: http://ojnc.byethost11.com -
How to configure Pay Roll in SAP
Dear Gurus,
How to configure Pay Roll in SAP. Pls suggest.
Regards
Pankaj
Please have a look at the forum searchDefine Employee Sub Group Grouping for PCR and CAP / Check Payscale Area / Check Payscale Type / Check Assignment of Pay Scale Structure to Enterprise Structure / TARIF Feature / Create Control Record / Revise Payscale groups and levels / Create Wage type catalog / Employee Subgroup Grouping for primary wage types / Personnel Subarea Grouping for Primary Wage Type / Setup Payroll Period for Collective Agreement Provision / Check wage type group Basic pay / Define wage type permissibility for each PS and ESG / Check wage type characteristics / Maintain Valuation of Base Wage types /
Check Wage Type Group Recurring Payments and Deductions / Check Wage Type Group Additional Payments /Check Wage Type Group Membership Fees / Membership Payee /Determine allowed payees per membership type /Define Membership / Deduction Types /Define Trust Details for Provident Fund /Maintain Contribution Details for Provident Fund ( Feature 40EPF )
Assign Company Rates for Provident Fund / Define PF Trust Validity Period / Define Contribution type for Statutory rates for Provident Fund /Maintain ESI Eligibility Limit / Define Personnel Area and Subarea Groupings for ESI /Assign ESI Groupings for Personnel Area and Subarea/
Maintain Contribution Rates for ESI/
Maintain Gratuity Trust ID/
Maintain Gratuity Contribution Frequency and related wage types/
Define Contribution Rates for Gratuity/
Maintain Superannuation Trust ID/
Maintain Superannuation Contrib. Freq and Rel. Wage Types/
Define Contribution Rates for Superannuation/
Maintain Loan Types/
Create Loan Conditions/
Maintain Loans Grouping (Feature 40LGR)/
Maintain Salary Components ( Feature 40LSL)/
Max. no. loans allowed (LML1)( Maximum number of loans allowed at a time)/
Max. no. loans allowed (LML2)(Maximum no of loans allowed)/
Maintain Maximum amount for loans outstanding(LMVAL)/
Maintain Loans Eligibility Checks and Limits/
Maintain Accommodation Types/
Maintain the processing options for CLA/
Define Conveyance Types/
Assign eligibility criteria for conveyance allowance/
Define Professional Tax Grouping Details/
Assign Professional Tax Groupings for Personnel Areas and Subareas/
Assign Amounts for Professional Tax Deduction/
Maintain Method and Form Layout for Professional Tax Groupings/
Define Personnel Area and Subarea Groupings for Tax/
Assign Tax Groupings for Personnel Areas and Subareas/
Define Tax Codes/
Assign Tax Code Limits to Wage Types/
Assign wagetype to wagetype group offcycle /
Set Up Off-Cycle Reasons/
Specify default values for wage types Off Cycle/
Specify Default Values for Payment Methods/
Configure wage types for Section 80/
Configure wage types for Section 88/
Define other allowance or re-imbursement type for exemption/
Define priority for deductions/
Maintain recovery of arrears/
Define cumulation types for wage types/
Assign universal contribution groupings for universal contribution types /
Assign state for universal contribution grouping/
Assign slab code and other parameters for each state of univ.type./
Assign Contribution value for each slab./
Define Period Parameters/
Define Date Modifiers/
Check Payroll Accounting Area/
Generate Payroll Periods/
Generate calendar for cummulation/
Assign Basic Wage Types to Grouping for Allowances/
Define Pay scale groupings for Allowance/
Assign Pay Scale Groupings for Allowances/
Assign wage type model for Pay scale grouping for Allowances/
Calculate Eligibility for Raps/ . ....................................................................................................................................................................................................................................................................
If you get the knowledge then please . mark the questions as answered -
How to configure debug mode in Oracle 11g ?
I am making Oracle Argus system based on Oracle 11g DB.
I heard there is debugging mode in Oracle DB to investigate trouble.
How to configure debug mode in Oracle 11g ?Are you talking about oradebug:
SQL> oradebug setmypid
SQL> oradebug unlimit
SQL> oradebug dump systemstate 266
SQL> oradebug dump systemstate 266
SQL> oradebug -g all hanganalyze 3 ---> g is for RAC database instances
Thanks,
http://gssdba.wordpress.com -
How to configure dba cockpit in sap solution manager
Hello colleagues,
how to configure dba cockpit in sap solution manager??
Thanks!Hi Victor,
Please go through this doc, it might helps you.
Sap Solution Manager - Dbacockpit
Sap Solman Instguide Dba Cockpit Setup
Regards
Amit -
How to configure Xl Reporter in SAP Business One
Hi
Can you please tell me the steps for how to configure xl reporter in sap b1
Regards
SandipHi Sandip,
In Sap 8.8 u no need to configure or install XL reporter .
While Installing SAP 8.8 XL reporter Automatically Gets Installed
And Also check whether MS Excel 2003 installed 2003 excel supports XL reporter
U can check under Sap Menu -
>Under Tools----
>u can find XL reporter .
Hope this helps u
Regards
Jenny -
How to Configuration PDC Management in SAP
Dear Gurus
Please guide me how to configuration PDC management in SAP FI.
Regards
Tapan MaityHello Tapan,
Your requirement is not clear. Is PDC mean Plant Data Collection?
If yes, then PFB the required link for that.
Supply Chain Management - Plant Data Collection SAP R/3 Shop Floor Control (PP-PDC)
SAP ECC - Plant Data Collection - Time, Attendance and Employee Expenditures (HR-PDC)
I hope it helps else revert us with your query.
Thanks & Regards,
Lakshmi S -
I want to make all my caller id pics full screen how do i do that? When i download a picture from my phone it makes it full screen then it goes back to the small photo in the upper right hand corner how do i make them stay full screen help please:-)
@Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
Exit out of Outlook and reboot your machine.
Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
Everything should now sync pretty seamlessly.
I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
Arthur P. Johnson -
Class ALV in Edit mode and F4 Value help
I am displaying Customer Information in ALV Grid with class method. Customer Number is editable mode and having search help. When user F4 on Customer Number and select any value from search help. This selected new value is not passing to ALV grid in Customer number column. I tried with on_f4 method, but it is not working or something i doing incorrect.
Can any one help to solve this problem ?
Many thanksHi.
try with method check_changed_data in after event.
CALL METHOD go_grid->check_changed_data
IMPORTING
or implement a local_event_class to handle F4 event and Change event.
The demo program "BCALV_TEST_GRID_F4_HELP" can help you tu find the correct code. -
How to customize 'Edit Mode' screen buttons
Does anyone know how to customize the buttons on the screen in 'Edit Mode' of Java portlets?
I would like to change the text of the buttons intead of the standard 'Apply, OK and Cancel'.
Please advise.
Thanks.You could actually change these Labels on the buttons by modifying the DefaultContainerRenderer for the required PortletDefinition. By default every mode renders data using the DefaultContainerRenderer class, this class is capable of painting the Headers and Footers.
You need to write a new class MyDefaultContainerRenderer extending from DefaultContainerRenderer and override the method renderDesignFormBodyBegin(..).
You should be very careful in overriding this method as not to effect the base fucntionality. Also these Labels are actually NLS compliant so you also need to make sure to be NLS compliant for the new labels.
Finally, you need to specify the PortletDefinition to make use of new MyDefaultContainerRenderer excluding the default one by adding the following tag under portlet definition tag:
<portlet class="oracle.portal.provider.v2.DefaultPortletDefinition">
<id>1</id>
<name>portletName</name>
<title>portlet Title</title>
...... <b><containerRenderer>your.company.package.MyDefaultContainerRenderer</containerRenderer></b>
<render class=".......>
</portlet> -
How to configure Mail Alerts in SAP R/3 System.
Hi,
I want to send mails to the users when alert occurs.How to configure that mail alers in R/3 system.pls send me the related information and links.
Regards,
Kiran.HI
I think there is no standard functionality in sap u need to develop with abaper help with proper logic
if it is for venijula s_alr_87009936 try this t.code
Thanks & Regards
Phaneendra
Edited by: phaneendra Reddy on Jun 12, 2009 9:24 AM -
How to configure the email in SAP
Hi Experts,
Can you please let me know how to configure the email in the server?
Thanks in Advance
Regards,
Kuldeep VermaHello Indu Rayepudi ..
I have followed the Recommendations and everything is going well but I can only send emails from the same domain, how can I set up to send to hotmail, gmail, yahoo?
Mi sap es SAP ECC 6.0
The administrator said that the Exchange server already has registered the server's ip sap to enable him to relay this IP.
But nothing happens.
Do you have any idea? any help from you, I would greatly appreciate .. Gina
Here is the error: http://img.photobucket.com/albums/v484/mauzzz/SAP/SO01Erroringles-1.jpg
Edited by: GCH on Sep 25, 2008 11:24 PM -
Hi,
I have a requirement where some information is required to be sent from SAP system to SQL table with PI in between. The scenario is of async type and i am planning to have acknowledgements (acknow.) to be sent from JDBC receiver to Proxy sender. This being my first time on acknow., i donu2019t have any clues as to how to handle this. I need your help on the below listed points:
1.) Out of System and Application acknow. which are the ones supported by JDBC receiver in an async mode.
2.) I am not using BPM so is it possible to enable acknow. in my case.
3.) What are the steps that i have to follow to configure acknow. in my scenario. (I will be obliged if they can be explained a little elaborately)
Looking for a lot of help from you folks.
Thanks & Regards,
AnshulHi Anshul,
>>1.) Out of System and Application acknow. which are the ones supported by JDBC receiver in an async mode.
System acknowledgments are supported
Check this wiki page http://wiki.sdn.sap.com/wiki/display/XI/Acknowledgement+types
>>2.) I am not using BPM so is it possible to enable acknow. in my case.
Yes
>>3.) What are the steps that i have to follow to configure acknow. in my scenario. (I will be obliged if they can be explained a little elaborately)
Your ABAP side should ask for an acknowledgment. so create a client proxy and refer the link on an exampel of code that need to be written in ABAP
http://help.sap.com/saphelp_nw04/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/frameset.htm
Regards
Suraj -
[How .. ]: Load image to SAP Screen.
Hi All,
I'm having a project where i should display the corresponding picture.
These are questions that i'm going to ask :
1. How can i store the image to SAP Server ? Could you direct me step by step please ..
2. How can i load the picture from the program ? Could it also be directed step by step ..
Many thanks all.
Still need your guidance a lot.
Kindly Regards,
Niel.Niel,
Say thanks to Pavan Praveen who helped me with this sometime back.
To create a logo u have to remember one thing is u have to upload that logo through OAER or SE78
for uploading logo in OAER
Enter class name as PICTURES
Class type as OT
Object key the name of ur logo want to upload
then press F8 or execute
Then it will automatically creates a folder for ur LOGO and upload ur logo in that folder
After that In the left side bottom of the page u can c the following options
1)Detail
2)Document Info
3)Keywords
4)Create
goto Detail in which u can find the Object Id
which u have to paste in the function module of this program
Check this program1
*& Report ZREPORT_LOGO *
REPORT ZREPORT_LOGO.
DATA:
docking TYPE REF TO cl_gui_docking_container,
picture_control_1 TYPE REF TO cl_gui_picture,
url(256) TYPE c .
DATA : sum(4) , num1(4) , num2(4).
PARAMETERS: p_dummy(4) DEFAULT '4' .
PARAMETERS: p_dummy1(4) DEFAULT '5' .
AT SELECTION-SCREEN OUTPUT.
PERFORM show_pic.
START-OF-SELECTION.
num1 = p_dummy.
num2 = p_dummy1.
sum = num1 + num2.
WRITE : / sum.
*& Form show_pic
FORM show_pic.
DATA: repid LIKE sy-repid.
repid = sy-repid.
CREATE OBJECT picture_control_1 EXPORTING parent = docking.
CHECK sy-subrc = 0.
CALL METHOD picture_control_1->set_3d_border
EXPORTING
border = 5.
CALL METHOD picture_control_1->set_display_mode
EXPORTING
display_mode = cl_gui_picture=>display_mode_stretch.
CALL METHOD picture_control_1->set_position
EXPORTING
height = 100
left = 500
top = 10
width = 300.
CALL METHOD picture_control_1->load_picture_from_url
EXPORTING
url = 'c:/pic.bmp'.
IF sy-subrc NE 0.
ENDIF.
ENDFORM. "show_pic
Check this program 2
program zsap_picture_demo.
set screen 200.
TYPE-POOLS cndp.
CLASS c_event_receiver
DEFINITION
class c_event_receiver definition.
The class is used to test the events raised by the cl_gui_picture
class
public section.
methods event_handler_picture_dblclick
for event picture_dblclick of cl_gui_picture
importing mouse_pos_x mouse_pos_y sender.
methods event_handler_context_menu
for event context_menu of cl_gui_picture
importing sender.
methods event_handler_context_menu_sel
for event context_menu_selected of cl_gui_picture
importing fcode sender.
endclass.
DATA
data function like sy-ucomm. " OK-Code field in screen 200
data url type cndp_url. " URL-field in screen 200
data url2 type cndp_url. " URL-field in screen 200
data picture_control_1 type ref to cl_gui_picture.
data picture_control_2 type ref to cl_gui_picture.
data container_1 type ref to cl_gui_custom_container.
data container_2 type ref to cl_gui_custom_container.
data event_receiver type ref to c_event_receiver.
data event_tab type cntl_simple_events.
data event_tab_line type cntl_simple_event.
data return type i.
PBO
before_output
module before_output output.
set pf-status 'MAIN0001'.
IF PICTURE_CONTROL_1 IS INITIAL.
Create controls
create object container_1
exporting container_name = 'PICTURE_CONTROL_1'.
create object container_2
exporting container_name = 'PICTURE_CONTROL_2'.
CREATE OBJECT PICTURE_CONTROL_1 exporting parent = container_1.
CREATE OBJECT PICTURE_CONTROL_2 exporting parent = container_2.
Register the events
EVENT_TAB_LINE-EVENTID = CL_GUI_PICTURE=>EVENTID_PICTURE_DBLCLICK.
append EVENT_TAB_LINE to EVENT_TAB.
EVENT_TAB_LINE-EVENTID = CL_GUI_PICTURE=>EVENTID_CONTEXT_MENU.
append EVENT_TAB_LINE to EVENT_TAB.
EVENT_TAB_LINE-EVENTID = CL_GUI_PICTURE=>EVENTID_CONTEXT_MENU_SELECTED.
append EVENT_TAB_LINE to EVENT_TAB.
CALL METHOD PICTURE_CONTROL_1->SET_REGISTERED_EVENTS
exporting
EVENTS = event_tab.
CALL METHOD PICTURE_CONTROL_2->SET_REGISTERED_EVENTS
exporting
EVENTS = event_tab.
Create the event_receiver object and set the handlers for the events
of the picture controls
create object event_receiver.
set handler event_receiver->event_handler_picture_dblclick
FOR PICTURE_CONTROL_1.
set handler event_receiver->event_handler_context_menu
FOR PICTURE_CONTROL_1.
set handler event_receiver->event_handler_context_menu_sel
FOR PICTURE_CONTROL_1.
set handler event_receiver->event_handler_picture_dblclick
FOR PICTURE_CONTROL_2.
set handler event_receiver->event_handler_context_menu
FOR PICTURE_CONTROL_2.
set handler event_receiver->event_handler_context_menu_sel
FOR PICTURE_CONTROL_2.
Set the display mode to 'normal' (0)
CALL METHOD PICTURE_CONTROL_1->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_NORMAL.
CALL METHOD PICTURE_CONTROL_2->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_NORMAL.
Set 3D Border
CALL METHOD PICTURE_CONTROL_1->SET_3D_BORDER
exporting border = 1.
CALL METHOD PICTURE_CONTROL_2->SET_3D_BORDER
exporting border = 1.
new async implementation since 4.6C
CALL FUNCTION 'DP_PUBLISH_WWW_URL'
EXPORTING
OBJID = 'HTMLCNTL_TESTHTM2_SAP_AG'
LIFETIME = cndp_lifetime_transaction
IMPORTING
URL = url
EXCEPTIONS
OTHERS = 1.
Load the picture by using the url generated by the data provider.
if sy-subrc = 0.
CALL METHOD PICTURE_CONTROL_1->LOAD_PICTURE_FROM_URL_ASYNC
exporting url = url.
endif.
CALL FUNCTION 'DP_PUBLISH_WWW_URL'
EXPORTING
OBJID = 'DEMOWORD97SAPLOGO'
LIFETIME = cndp_lifetime_transaction
IMPORTING
URL = url2
EXCEPTIONS
OTHERS = 1.
load image
if sy-subrc = 0.
CALL METHOD PICTURE_CONTROL_2->LOAD_PICTURE_FROM_URL_async
exporting url = url2.
endif.
endif.
endmodule.
PAI
after_input
module after_input input.
case function.
At the end of the program destroy the control
when 'BACK'.
CALL METHOD container_1->FREE.
CALL METHOD container_2->FREE.
leave to screen 0.
Change the display mode
when 'NORMAL'.
CALL METHOD PICTURE_CONTROL_1->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_NORMAL.
CALL METHOD PICTURE_CONTROL_2->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_NORMAL.
when 'STRETCH'.
CALL METHOD PICTURE_CONTROL_1->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_STRETCH.
CALL METHOD PICTURE_CONTROL_2->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_STRETCH.
when 'FIT'.
CALL METHOD PICTURE_CONTROL_1->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_FIT.
CALL METHOD PICTURE_CONTROL_2->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_FIT.
when 'NORMAL_CTR'.
CALL METHOD PICTURE_CONTROL_1->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_NORMAL_CENTER.
CALL METHOD PICTURE_CONTROL_2->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_NORMAL_CENTER.
when 'FIT_CTR'.
CALL METHOD PICTURE_CONTROL_1->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_FIT_CENTER.
CALL METHOD PICTURE_CONTROL_2->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_FIT_CENTER.
Clear the picture
when 'CLEAR'.
CALL METHOD PICTURE_CONTROL_1->CLEAR_PICTURE.
Load a new picture
when space.
CALL METHOD PICTURE_CONTROL_1->LOAD_PICTURE_FROM_URL
exporting url = url
importing result = return.
call method cl_gui_cfw=>flush.
if return = 0.
url = text-000.
endif.
endcase.
clear function.
endmodule.
CLASS c_event_receiver
IMPLEMENTATION
CLASS C_event_receiver implementation.
CLASS c_event_receiver
METHOD event_handler_picture_dblclick
METHOD EVENT_HANDLER_PICTURE_DBLCLICK.
for event picture_dblclick of c_picture_control
importing mouse_pos_x mouse_pos_y.
DATA pos_x(5) type c.
DATA pos_y(5) type c.
pos_x = mouse_pos_x.
pos_y = mouse_pos_y.
IF SENDER = PICTURE_CONTROL_1.
MESSAGE I000(0K) WITH
'DoubleClick' 'Upper Picture' POS_X POS_Y. "#EC NOTEXT
else.
MESSAGE I000(0K) WITH
'DoubleClick' 'Lower Picture' POS_X POS_Y. "#EC NOTEXT
endif.
endmethod.
CLASS c_event_receiver
METHOD event_handler_context_menu
METHOD EVENT_HANDLER_CONTEXT_MENU.
data menu type ref to cl_ctmenu.
create object menu.
call method menu->ADD_FUNCTION exporting
fcode = text-001
TEXT = TEXT-001.
call method menu->ADD_FUNCTION exporting
FCODE = TEXT-002
TEXT = TEXT-002.
call method menu->ADD_FUNCTION exporting
FCODE = TEXT-003
TEXT = TEXT-003.
call method menu->ADD_FUNCTION exporting
FCODE = TEXT-004
TEXT = TEXT-004.
call method menu->ADD_FUNCTION exporting
FCODE = TEXT-005
TEXT = TEXT-005.
CALL METHOD SENDER->DISPLAY_CONTEXT_MENU
EXPORTING CONTEXT_MENU = MENU.
endmethod.
CLASS c_event_receiver
METHOD event_handler_context_menu_sel
METHOD EVENT_HANDLER_CONTEXT_MENU_sel.
DATA DISPLAY_MODE TYPE I.
IF FCODE = TEXT-001.
DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_NORMAL.
ENDIF.
IF FCODE = TEXT-002.
DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_STRETCH.
ENDIF.
IF FCODE = TEXT-003.
DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_FIT.
ENDIF.
IF FCODE = TEXT-004.
DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_NORMAL_CENTER.
ENDIF.
IF FCODE = TEXT-005.
DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_FIT_CENTER.
ENDIF.
CALL METHOD SENDER->SET_DISPLAY_MODE
EXPORTING DISPLAY_MODE = DISPLAY_MODE.
endmethod.
endclass.
Note: While creating this program I had observed the thing is it will accepts the logo which was having the URL so try to create a logo of URL but u can display the Standard SAP logo using this program
To upload the the logo image on the right hand side of the SAP screen.
Transaction codeSMW0
X - Binary data for WebRFC application
Hit Enter
Click Execute
Click Settings -> Maintain MIME types
Click the Create button
Fill in :- TYPE : image/gif EXTENSION : .GIF
Click Save
Click Back to the Binary data for WebRFC
Click Create
Fill in :- Obj. name : ZXXXX.GIF Description : Company Logo
Click Import and specify the filename where your GIF file is located.File type is BIN. Finish press the Transfer button.
If successful, your logo will be shown in the Binary data for WebRFC.
Transaction codeSM30 - Table/View - SSM_CUST
Click Maintain
Click New Entries
Name Value to be set
START_IMAGE ZXXXX.GIF
RESIZE_IMAGE NO
Logoff and Login again
Check this link
http://www.sap-img.com/fu002.htm -
How to configure ECS facility in SAP
Dear Friends ,
Please tell me how to configure ECS payment facility in SAP ?
Regards
Nilesh VakilDear Friends ,
Please tell me how to configure ECS payment facility in SAP ?
Regards
Nilesh Vakil
Maybe you are looking for
-
How can I tell if my motherboard and/or logic board is fried?
Good evening all, I was just wondering if anybody can tell me the way to find out if my old power mac mobo is fried, or weather it's the logic board or the power supply. When I try to boot it up there is no start up chime, there is no white power on
-
Problem with temprature sensor ideatab A2107
hello, im having problem with my temprature sensor, there is no change in my temp nor it is showing the correct temp...... what im i supposed to do to fix it...........
-
How can we add a menu in Adobe Illustrator CS3?
Hi I want to create a new menu in Adobe Illustrator menu structure, and I want to call another application through that menu. After hours of searching in web I came to know that I have to work with Plugin programming. So I downloaded the adobe illus
-
CS6 Support for Mountain Lion?
In the FAQ I found this: Do Adobe Creative Suite 5, 5.5, and CS6 applications support Mac OS X Mountain Lion (v10.8)? Adobe and Apple have worked closely together to test Adobe® Creative Suite® 5, 5.5 and CS6 editions and individual products for reli
-
Program Errors - I am getting all kinds of program errors with Photoshop CC
Since I updated my photoshop version to CC I am getting all kinds of program errors. It is happening when: I try and add a shape Change the active colour in the tools Use a pattern This is what I have noticed so far. Ellissa