How to configure end user for CallManager 5.1
Hello everyboy
I am trying to configure the end user to have access to callmanager, because I want the people can configure the speed dial, I know that release 4.2 you just configure the user/password and the peple can log in to http://<ip_address>/ccmuser and that was all.
But in this relese 5.X the server replies denied access.
Could someone help me with this issue PLEASE
REGARDS
WALTER FLORES
Hi Pklos
Thank very much for helping me it worked User Roles>Standard CCM User then add users.
Than very much.
Walter Flores
Similar Messages
-
Configure oimadmin user for ldapsync
Hi All,
How to configure oimadmin user for ldapsync(OID).?? Iam using OIM11gR2 with ldap sync(oid).
Thankshi,
Check this link below:
http://docs.oracle.com/cd/E14571_01/install.1111/e12002/oidonly014.htm
I hope this helps you,
Thiago Leoncio. -
How to configure Email notification for User login's in Exchange Infrastructure?
How to configure Email notification for User login's in Client Machines?
Hi ,
Based on the description , you need to assign logon scripts to the end users via group policy and also use your exchange server as the smtp server in that logon script to relay emails to the internal recipients.
Thanks & Regards S.Nithyanandham -
How to configure release procedure for rate contracts release
Dear all,
How to configure release procedure for rate contract following are the requirements
they are two release codes c1 & c2 <=100000,>=100000
if c1 is not there c2 has to be approved
Change in the value of the rate contract contract
Change in the validity of the rate contract
Addition of deletion of line items
While using a non u2013 released rate contract in the PO an error message should shoot out.
Also the logic should be changed while using the rate contract in the PO.
The usage of the rate contract should be till the validity of the rate contract. i.e. the measurement should be end date of the rate contract and the PO creation date and not the delivery date of the PO. &
It should be possible to refer existing valid rate contracts in purchase orders.
Regards,
bhaskarHi,
In SAP rate contract is known as value contract denoted with wk. The release procedure for rate contract is same as that of other contracts and scheduling agreements. The tables for contracts will vary with SA (Scheduling agreement) .You may try and maintain condition records based on the customer combination and maintian the validity date of condition records as per your requirement.For contract and PO will have the same header/item table as EKKO/EKPO, and the release
class in standard is the same FRG_EKKO, you can use the same for contract.
To distinguish if it's a contract or PO, EKKO-BSART can be used.
For contract EKKO-BSART will be MK or WK, while PO will have NB/UB etc..
You can restrict the document type to set up the release strategy for only contract.
Of cause, you can also create your own release class Z* for contract copying standard
one FRG_EKKO via CL01/Class type 032, and then assign the class Z* to customizing:
OLME:
-> contract
->Release Procedure for Contracts
->Define Release Procedure for Contracts
->Release Groups
If you have already created the PO release class.
Assign a new chracteristic of Document Category -BSTYP
Please check below link for detailed release procedure. I hope this wil help you out .Thanking you.
http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE#RELEASEPROCEDURE-TABLESUSEDFORRELEASEPROCEDURES -
I have the code to read from a file but my problem is how to prompt the user for the file name at run time.
import java.io.File;
import java.io.FileNotFoundException;
import java.util.InputMismatchException;
import java.util.Scanner;
public class FileRead {
public static void main(String args[]) {
Scanner scan = null;
File file = new File("Results.txt");
String number;
try {
scan = new Scanner(file);
while (scan.hasNext()){
number = scan.next();
System.out.println(number);}
catch (FileNotFoundException ex1){
System.out.println("No such file");
catch (IllegalStateException ex2){
System.out.println("Did you close the read by mistake");
catch (InputMismatchException ex){
System.out.println("File structure incorrect");
finally{
scan.close();}
}Any hints would be greatly appreciated. Thank you in advanceI have read through some of the tutorials that you have directed me too and they are very useful, thank you. however there are still a few things that i am not clear about. I am using net beans 5.0 I have placed a text file named Results.txt into the project at the root so the program can view it.
When I use the code that you provided me with, does it matter where the file is, or will it look through everywhere on the hard drive to find a match?
This code compiles but at run time it comes up with this error
run-single:
java.lang.NoClassDefFoundError: NamedFile
Exception in thread "main"
Java Result: 1
BUILD SUCCESSFUL (total time: 3 seconds)
import java.util.Scanner;
import java.io.*;
class NamedFileInput
public static void main (String[] args) throws IOException
int num, square;
// this Scanner is used to read what the user enters
Scanner user = new Scanner( System.in );
String fileName;
System.out.print("File Name: ");
fileName = user.nextLine().trim();
File file = new File( fileName ); // create a File object
// this Scanner is used to read from the file
Scanner scan = new Scanner( file );
while( scan.hasNextInt() ) // is there more data to process?
num = scan.nextInt();
square = num * num ;
System.out.println("The square of " + num + " is " + square);
}his is the code that i used. It is the same as the code you posted for me (on chapter 23 I/O using Scanner and PrintStream) Sorry im just really stuck on this!! -
How to lock multiple user for a transcation code at same time is der any tc
how to lock multiple user for a transcation code at same time is der any tc
suppose i hav 15 user and i want to lock 10 user for mm02 who can i to itBasis can do a export and import transport, still if don't have connection between boxes.
or
check this
http://www.sap-basis-abap.com/abap/copy-program-variants-from-one-to-another.htm
a® -
How to configure Broadcast messaging for IC Webclient profile
Dear all,
How to configure Broadcast messaging for IC Webclient profile. what are the prerequisites for it?
We are not using EP interface for IC Webclient, then where can I find broadcast messaging URL in SAP CRM system.
I have checked for the relevant BSP application, but could not find.
Please help me to configure the scenario successfully, your help will be highly appreciated.
Best regards,
Raghu ramHi raghu
In CRM Broad cast messaging application is CRM _BM,
Go to easy access u2013 go to favourites u2013 select add other objects - select BSP Applications- then select CRM_BM Application.
Select that BSP application and test it u2026
`
Regards,
Narsimha -
How to restrict the user for re-submitting the same form
Hi All,
I would like to know, How to restrict a user for re-submitting the same page.
I have a jsp page with submit button... and should not allow the user to save the same data again ..
AnilTry the followings. If user disable cookies, this will not work. You need to modify to detect such situation!
String processed = "mycooke";
Cookie[] cookies = request.getCookies();
Cookie c = null;
if (cookies!=null) {
for (int i=0; i < cookies.length; i++) {
if (cookies.getName.equals(processed)) {
c = cookies[i];
break;
if (c!=null) {
// already processed.
// send error message and exit.
// set cookie;
c = new Cookie(processed , "yourdata");
c.setMaxAge(-1);
response.addCookie(c);
// process as it is the first; -
How to configure SMTP server for osb 10.3.1
Hi All,
Can anyone share information on how to configure SMTP server for osb 10.3.1
and then how to send an email from osb 10.3.1
Thanks in Advance!!Thanks a lot!!
I configured the same way. When I am sending email to an account on the same domain as my SMTP server is the sending of email is successful. But its giving error when I am trying to send an emain to an account which is on different domain. It giving error as "Operation has been cancelled"
Please suggest something. -
New GL configuration & end user presentation - ECC6-version
Hi,
In ECC6.0 version we need to have " New GL configuration & end user presentation "
Regds,
NiranjanNiranjan,
Please use this link to get all the required information.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/2d/830e405c538f5ce10000000a155106/frameset.htm
Hope this helps you.
Rgds
manish -
How to find backend user for sap bw on Hana
Hi expert,
how to find backend user for sap bw on Hana , which are used to communicate with Hana.
Many Thanks.Hi There,
Goto DB02,
Click on SQL Editor:
Execute the below Query:
select :session_user from dummy;
Regards,
Krishna Tangudu -
How to disable end user personalisation for all webdynpro application.
Dear Experts,
I have a requirement where I have to disable the end user personalization of each and every
webdynpro application in my server.
I know how to disable the personalization of a single application or a single component, but my requirement is to disable the personalization of all applications.
Request you to please suggest.
Warm Regards,
Upendra AgrawalHi,
As per SAP help,
Customizing: User-Independent, Client-Wide Modifications
While a single user u2013 during a personalization process u2013 can manipulate his or her own settings, an administrator has the option of executing Customizing settings for all users. Technically, this procedure is not different from personalization; both take place at runtime of an application. The difference lies in the range of the settings. In addition, for these global settings an application must run in a special administration session. This is always automatically the case if an application was started in the portal in the preview session. Independently of the portal, you can start an application in the following manner from within the workbench in administration mode:
Double-click the name of the application in the object list.
In the Web Dynpro Applications menu in the upper, left-hand corner of the Workbench window, choose Test Execute in Admin Mode .
The configuration mode is passed to an application as the sap-config-mode=X URL parameter.
Note
All the adjustments made by the administrator in admin mode are stored as client-specific. Presently no option is available for structuring smaller user groups on an administrative basis. Since cross-client adjustment applies to the respective configuration, the structuring of smaller groups can be implemented currently through the maintenance of different configurations.
End of the note.
You start personalization by calling up the context menu for the respective UI element in your application. In the corresponding context menu for an administrator (that is, with URL parameter sap-config-mode=X), in addition to the standard settings administrators have the option within a UI element container to sort either single lines (Grid, Matrix aund RowLayout) or single elements (FlowLayout).
Note
Administrators require special authorization for client-wide modifications. This can be a developer authorization or the special authorization S_WDR_P13N. You cannot create configurations at design time with this authorization, but you can make modifications at runtime.
End of the note.
These modifications are valid for all users but take place in the current client only.
Thanks,
Chandra -
How to get end user license for BT stack?
How do i get an end user license for BT stack ver 5 ?
Thank you !Talk with BT device manufacturer. If you use BT device with Toshiba BT software they should help you to get update.
-
How do I store images uploaded by end users for each record?
I am writing an application which requires end users to upload an image for each record they add. There could be thousands of images, and they are exclusive to this app. I use a File Browse item in order to let the user choose an image file to upload.
But all I have managed to achieve at the moment is storing the full pathname of where the image is on the users machine, which means they can see the images they upload but no-one else can! Obviously not practical. I haven't figured out how to actually upload the images to the server and achieve multi-user access from there.
My questions are, where is the best place to store these images, in the database or in a folder on the server? And what setups do I, or the DBA, need to do for both of these scenarios in order to save the uploaded images and display them.
Hopefully someone can give advice, or point me to some documentation explaining this procedure. Thanks in anticipation.
Rick.Hi
The file you upload can be found in APEX_APPLICATION_FILES view. If you are want to store the file as BLOB in your table you can use the code similar to:
SELECT BLOB_CONTENT, FILENAME, MIME_TYPE
INTO v_blob, v_actual_name, V_MIME_TYPE
FROM APEX_APPLICATION_FILES
WHERE name = :P216_FILE;Or directly insert in your table using
INSERT INTO ......... (.....)
(SELECT BLOB_CONTENT, FILENAME, MIME_TYPE
FROM APEX_APPLICATION_FILES
WHERE name = :P216_FILE);-----
Zulqarnain
http://www.maxapex.com
Low Cost, High Quality Hosting for Oracle Apex -
How to set End User Permission to an iView?
Hi experts,
can someone tell me how I can set End User Permission to enabled to an iView?Hi there,
From what I have read you want a user to access an iView without an account. To do this you need to configure the J2EE engine for an anonymous user access and set the iView property for authentication to anonymous.
Because the user has no account you have to assign any roles you want to use for permissions to the anonymous user account configured for anonymous access.
There is documentation on help.sap.com on how to configure anonymous access.
Hope this helps.
Regards
Christiaan
Maybe you are looking for
-
Dual Monitors - Adding Monitor to HP Pavilion p7-1287c
HP Pavilion p7-1287c desktop. Trying to add 2nd monitor. Got: 8gb ddr3, Intell HD graphics, 1 tb hard drive, Windows 7 64-bit. Bought a PNY GeForce 210 graphics card. Installed card without drivers installed and both monitors screens black. Remov
-
10.6.8 update sends mini mac into panic screen what now?
After update mini mac is now a brick Unable to safe boot or use any key commands So is it time to reinstall software?
-
Hi i have 4gb in my mac.I want to increase to 8 gb
-
I am trying to set Firefox as home page-browser. Please advise?
Words in the "Question" window above pretty much say it all; earlier this afternoon 10/10/2014 a really odd thing occurred I cannot explain clearly but it caused me to try to set Firefox browser (search engine) as home page...possibly I should have t
-
ITunes Crashes When Launched by Front Row
Hey everyone, If iTunes isn't running when I launch Front Row, I have some issues when I try to play its music through the Front Row interface. I can select "Music" just fine from the four-icon menu, but as soon as I try "Playlists" or "Artists" or a