How to configure Enterprise Manager both node (2 node) RAC?

Hi,
I have installed oracle 11g r2 rac with asm in two nodes. OS is hp-Unix.
I have installed oracle11g Active Data Guard using Single alone Database.
Both RAc and Active Data Guard works fine.
I have not configure Data Guard Broker.
I have configure Enterprise Manager during RAC database installation.
When I start Enterprise Manager from node1 its address to node1
but when I start Enterprise Manager from node2 it also addressed to node1.
When both node is up and running, I can connect from Enterprise Manager.
When node2 is down but node1 is up then also I can connect from Enterprise Manager
but when node1 is down and node2 is up I can't connect from Enterprise Manager.
Question: How to configure Enterprise Manager so that I can connect through it whenever any single node is running?
Thanks
Solaiman

http://www.gokhanatil.com/2012/04/manage-your-existing-data-guards-with.html

Similar Messages

How to configure Enterprise Manager in Active Data Guard?

Hi,
I have installed oracle 11g r2 rac with asm in two nodes. OS is hp-Unix.
I have installed oracle11g Active Data Guard using Single alone Database.
Both RAc and Active Data Guard works fine.
I have not configure Data Guard Broker.
Question: How to configure Enterprise Manager in Active Data Guard?
Thanks
Solaiman

http://www.gokhanatil.com/2012/04/manage-your-existing-data-guards-with.html

How to configure Enterprise Manager Database Control (EMDC) to make it work on 2 servers working (primary and standby) under DG rules

Hello everybody i use Oracle Database EE 11.2.0.4 with DG.
In those cases i need to get Enterprise Manager Database Control running against DB with no RAC and no DG i perform the following steps:
I Logon SQLPLUS as user SYS or SYSTEM, and drop the sysman account and management objects:
DECLARE
CURSOR c1 IS
SELECT owner, synonym_name name
FROM dba_synonyms
WHERE table_owner = 'SYSMAN';
BEGIN
FOR r1 IN c1 LOOP
IF r1.owner = 'PUBLIC' THEN
EXECUTE IMMEDIATE 'DROP PUBLIC SYNONYM '||r1.name;
ELSE
EXECUTE IMMEDIATE 'DROP SYNONYM '||r1.owner||'.'||r1.name;
END IF;
END LOOP;
END;
DROP USER mgmt_view CASCADE;
DROP ROLE mgmt_user;
DROP USER sysman CASCADE;
After that i run
emca -config dbcontrol db -repos recreate
But what should i do in cases i have 2 servers working (primary and standby) under DG rules?

Hi ,
It is not possible to monitor/administer a Logical or Physical Standby database, i.e Data Guard, using Enterprise Manager Database Control. This is primarily due to the fact that Database Control is designed to monitor 1 database and a Data Guard environment, by definition, includes more than 1 database.
If you attempt to run emca against a standby Database, you will get an error like (i.e. ORA-01219: database not open).
Database Control, can, of course, be used to monitor the current Primary database (with no ability to administer or monitor Data Guard related functionality). In such a case, when failover occurs Database Control must be reconfigured to run on the new Primary database using the commands detailed in Note 278100.1 How To Drop, Create And Recreate DB Control In A 10g Database, section C. Recreate/ReConfig DB Control, Option 2. Recreate the DB Control Configuration Files and Repository.
Enterprise Manager Grid Control or Cloud Control provides the functionality for viewing, monitoring, and administering primary and standby databases in a Data Guard configuration.
Reference: Is it Possible to Configure Database Control for a Logical or Physical Standby Database? (Doc ID 315116.1)
You can use EM 12c cloud control to monitor and manager Standby DB effectively
Ref to below link for details
Set Up and Manage Oracle Data Guard using Oracle Enterprise Manager Cloud Control 12c
Regards,
Rahul

How to install Enterprise manager on two node cluster

Hi,
I am new to Oracle working on 10g
can anyone post a document or link for step by step installation of oracel 10g enterprise manager on a two node cluster?
Thanks in advance.

userArshad wrote:
Thanks Hans.
To be specific I have to install Database control .that means I need to use the GUI .
Also I could see database control and DBconsole service on on 1st node but I cannot find that in 2nd node.That is the normal configuration - you use the DB Control from node 1 and it gets the information using the agent on Node 2. The DB Console then displays the information for both nodes.
Please note that the DB Control will place a relatively heavy load on each machine, which is why we want to restrict our load to the agent. It is for that reason that we prefer to use the Grid Control whenever possible - it provides the same mechanism and screens, but the JEE platform is on a separate machine and all you have on the RAC nodes is the agent.
But if you really want to run the DB Console from each node (again, not normally needed) you need to use emca to configure it on the second node. Metalink note 863631.1 should help you with that.

Configure Enterprise Manager Console in Oracle 10.2.0.4

Hi.. Friends,
We recently upgraded our SAP 4.7 to ECC 6 with Oracle 10.2.0.4 DB.. In Oracle 9 we have an option Enterprise manager console But in our new Oracle 10.2.0.4 there is no option like that. How can i configure Enterprise Manager console in this.
Our Operation System is Windows Server 2008.
Regards
Mahendran

Hi Mahendra,
OEM not supported in standard SAP See note Note 105047 - Support for Oracle functions in the SAP environment.
You can configure OEM but first check your license scope - Note 740897 - Info about the Oracle license scope; Required Oracle options
After fullfill read below note
Note 355770 - Oracle Enterprise Manager Database Control
Note 386413 - Oracle Enterprise Manager (OEM) in the SAP environment
SurendraJain

Configure Enterprise Manager with multiple Listener

Configure Enterprise Manager with multiple Listener
I have created 2 listeners and connected my database with both the listeners. If I stop one listener then it automatically uses second listener vice versa. But facing problem in case of enterprise manager. If i stop first listener which is on 1521 port it is not connecting to another listener which is on 1522 port.
any help ?

Your potential problem is Enterprise Manager simply doesn't KNOW about that second listener. You can easily verify that when you look at the monitored targets.
Enterprise Manager also reconstructs automagically it's own tnsnames.ora! So, it doesn't connect to second -completely redundant and useless - listener, because the tnsnames.ora entry on the Management Sever is incorrect.
Simply because you didn't made sure OEM could discover the second -completely redundant and useless- listener.
I notice you apparently don't want to read documentation. Yet the only way to work successfully with Oracle, and to become independent, is to read that documention.
Apart from that you should be able to find agentca.bat on your OS with one command, so, yes, I pointed you to the documentation, yes, you can find agentca.bat.
Sybrand Bakker
Senior Oracle DBA

Trouble in configuring Enterprise Manager

I am trying to Configure Enterprise Manager through DBCA tool.
Soon after the completion of 80% configuration its coming out.
When I checked in the log file, I have the following details shown below:
I would appreciate if u can provide me the solution
Thank u
Mar 8, 2011 10:32:31 AM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'db' set to true
Mar 8, 2011 10:32:31 AM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: ORACLE_HOME value: C:\oracle\ora102
Mar 8, 2011 10:32:31 AM oracle.sysman.emcp.EMConfig isEMConfigured
CONFIG: isEMConfigured for DB: SAN01
Mar 8, 2011 10:32:32 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Mar 8, 2011 10:32:32 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: Cluster.isCluster: false. Skip call to getLocalNode
Mar 8, 2011 10:32:32 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Mar 8, 2011 10:32:32 AM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: SAN01 Host: 192.168.88.128 Node: null OH: C:\oracle\ora102 isDBC: false
Mar 8, 2011 10:32:32 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Mar 8, 2011 10:32:32 AM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Mar 8, 2011 10:32:32 AM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: SAN01 Host: 192.168.88.128 Node: null OH: C:\oracle\ora102 agentHome: null isCentral: false
Mar 8, 2011 10:32:32 AM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to C:\oracle\ora102\oui
Mar 8, 2011 10:32:32 AM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to C:\oracle\ora102\oui
Mar 8, 2011 10:32:33 AM oracle.sysman.emcp.util.CentralAgentUtil getCentralAgentHomeAndURL
CONFIG: Central Agent home and URL: {}
Mar 8, 2011 10:33:17 AM oracle.sysman.emcp.EMConfig finalize
CONFIG: finalize() called for EMConfig

Hi,
do you have adminrights to ORA_DBA group (In your local users and groups ) ?
Soon after the completion of 80% configuration its coming out.What's the actual problem ?
You posted a section of the install log. Is there any errors available? Please post (even a sample of) the file, but at least till the end of it!
Please post the alert log of the database with sid : SAN01
Thanks,
Thierry

How to configure solution manager service desk knowledge base for customer?

Hi Expert,
How to configure u201CSolution Manager Service Desk Knowledge Baseu201D to allow Customer to check on the solution?
Can we make the Solution Database open for the key user? Can we add one link in the workcenter and the customer can search existing solutions before they create message to us?
Please advice,
Thanks
regards,
ng chong chuan

>
Chong Chuan Ng wrote:
> How to configure u201CSolution Manager Service Desk Knowledge Baseu201D to allow Customer to check on the solution?
>
> Can we make the Solution Database open for the key user? Can we add one link in the workcenter and the customer can search existing solutions before they create message to us?
Hi,
It's a good idea, but currently it's not yet supported.
In Work Center, there is no predefined (nor a hidden) link shipped by SAP to access the Solution Database for key users.
With a future EhP for Solution Manager, you might get an integration of the Solution Database into the message processing Web UI.
Best regards,
Ruediger

Error while configuring Enterprise manager

Hello,
I want to configure enterprise manager, while creating a new database using database configuration assistant in oracle 11g i am getting following error message
*"Configuring database with database control requires a listener to be configured in the current oracle home.
You need to run Netca to configure a listener before you can procede. Otherwise you may choose o continue with out Database control configuration"*
My OS is Windows 7
is there any other way to configure Enterprise manager OR do i need to install any specific package
Thank you friends.

Hi, Finally i created a listener "KUMAR"
*Microsoft Windows [Version 6.1.7600]*
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\praveen kumar gogula>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 22-SEP-2011 17:50
*:44*
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias                     KUMAR
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date                22-SEP-2011 17:44:58
Uptime                    0 days 0 hr. 5 min. 48 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\oracle\product\11.2.0\dbhome_1\network\admin\listen
er.ora
Listener Log File         c:\oracle\diag\tnslsnr\praveenkumarg\kumar\alert\log.x
ml
Listening Endpoints Summary...
*(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=praveenkumarg)(PORT=1521)))*
*(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))*
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "praveen" has 1 instance(s).
Instance "praveen", status READY, has 1 handler(s) for this service...
Service "praveenXDB" has 1 instance(s).
Instance "praveen", status READY, has 1 handler(s) for this service...
The command completed successfully
C:\Users\praveen kumar gogula>
What to do next?

How to Configure Transport MAnagement system in CHARM

Hi
How to Configure Transport MAnagement system in CHARM? Here our requirement is when ever a change request approved in the background Transport request should be created automatically. We have configured all the Transport Routes in our lanscape.
Can any one tell me the detailed process? If you have any Configuration document please share it to me
Points will awarded for helpful answer
Thanks
Bhaskar

In a two system landscape is it necessary to make development the domain controller always?
No such compulsion as such exist(correct me if wrong),however why you want to make production your domain controller?
This is not recommended.
Regards,
Ashutosh

How to configure workflow manager 1.0 ? Scenario "sharepoint 2013 and sql server 2012 workflow manager in one server" .

i have sharepoint 2013 and sql server 2012 in one server . how to configure workflow manager 1.0 on the same server ?

Please follow below technet article :
http://technet.microsoft.com/en-us/library/jj658588(v=office.15).aspx
Installing and Configuring Workflow Manager 1.0 (Step by Step)
Note: The steps in this article apply to SharePoint Server 2013.
The SharePoint 2013 Workflow platform is not supported in SharePoint Foundation 2013.
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP)

How to Configuration PDC Management in SAP

Dear Gurus
Please guide me how to configuration PDC management in SAP FI.
Regards
Tapan Maity

Hello Tapan,
Your requirement is not clear. Is PDC mean Plant Data Collection?
If yes, then PFB the required link for that.
Supply Chain Management - Plant Data Collection SAP R/3 Shop Floor Control (PP-PDC)
SAP ECC - Plant Data Collection - Time, Attendance and Employee Expenditures (HR-PDC)
I hope it helps else revert us with your query.
Thanks & Regards,
Lakshmi S

Configure Enterprise Manager in an Cluster Environment

Hi,
I have a Oracle Database 10g Enterprise configured in a Red Hat Cluster environment in an active/passive automatic failover topology.
I need to configure Enterprise Manager in this database.
Can anyone help wiht the steps to perform it. Can it be done with the 'emca' by just giving with some means the virtual IP address of the Oracle Service in the cluster.
Best Regard,
Drini

Start reading
Using RepManager Utility
Oracle® Enterprise Manager Grid Control Advanced Installation and Configuration Guide
*11g Release 1 (11.1.0.1.0)*
http://download.oracle.com/docs/cd/E11857_01/install.111/e16847/appdx_repmgr.htm#CFAGHEJF
Regards
Rob
http://oemgc.wordpress.com

Steps to configure Enterprise Manager (oracle 10g with Window2003 Entp OS

Hi Experts,
Could any one provide me with steps to configure Enterprise Manger.
Also let me know any parameter or services to be cheked before starting the Enterprise Manager.
I am facing problem while configuring it, I would be thankful to you if u can provide me details.
So that I can start once again configuring Enterprise Manager.
Regards
Sri

To configure please run the command emca -config dbcontrol db -repos create
Edited by: mnazim on Mar 10, 2011 9:38 PM

How to start Enterprise Manager Server on Linux

I install successful oracle 9i on redhat 7.2 Linux ,but I don't know how to start Enterprise Manager Server on Linux ,please help me ,thanks!

oemctrl start oms
oemctrl status oms sysman/oem_temp
oemctrl stop oms sysman/oem_temp

How to configure Enterprise Manager both node (2 node) RAC?

Similar Messages

Maybe you are looking for