How to configure Fault policy for the Mediator??

Hi All,
I failed to configure fault policy for the mediator on FMW 11g. Below are my configurations.
1. I created simple ESB project: Consume message(using JMS adapter) from AQ topic: Q1 and produce to another AQ topic: Q2. In order to test the fault policy, The project will thorw an exception when produce to the AQ topic Q2 (Q2 didnt exist).
2. Created fault-policies.xml and fault-bindings.xml files in the Composite project directory.
But it didnt work, I didnt find any retry action in the log file. Is this the correct way to configure the fault policy? your suggestions are welcome. thanks.
fault-policies.xml
======================================================
<?xml version="1.0" encoding="UTF-8"?>
<faultPolicies>
<faultPolicy version="2.0.1" id="CRM_ServiceFaults">
<Conditions>
<faultName xmlns:medns="http://schemas.oracle.com/mediator/faults"
name="medns:mediatorFault">
<condition>
<test>contains($fault.mediatorErrorCode, "TYPE_FATAL_MESH")</test>
<action ref="ora-retry"/>
</condition>
</faultName>
</Conditions>
<Actions>
<Action id="ora-retry">
<retry>
<retryCount>3</retryCount>
<retryInterval>40</retryInterval>
<exponentialBackoff/>
<retryFailureAction ref="ora-terminate"/>
<retrySuccessAction ref="ora-terminate"/>
</retry>
</Action>
<Action id="ora-terminate">
<abort/>
</Action>
</Actions>
</faultPolicy>
</faultPolicies>
fault-bindings.xml
==========================================================
<?xml version="1.0" encoding="UTF-8"?>
<faultPolicyBindings version="2.0.1"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<composite faultPolicy="CRM_ServiceFaults"/>
</faultPolicyBindings>
Thanks Mingzhuang

http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10224/bp_faults.htm#SOASE9906

Similar Messages

  • How to define JMX policy for the operation ALSBConfigurationMBean.getRefs

    Hello,
    I'm trying to configure the JMX policies of my Weblogic Server.
    I have followed the recommandations from the http://docs.oracle.com/cd/E13222_01/wls/docs100/ConsoleHelp/taskhelp/security/DefinePoliciesforMBeans.html link.
    I try to run the following code on a client side :
    ALSBConfigurationMBean lConfigMBean = (ALSBConfigurationMBean) lDomainMBean.findService(ALSBConfigurationMBean.NAME, ALSBConfigurationMBean.TYPE, null);
    lConfigMBean.getRefs-BusinessServiceQuery);
    I got the exception :
    Caused by: weblogic.management.NoAccessRuntimeException: Access not allowed for subject: principals=[], on Resource com.bea.wli.sb.management.configuration.DelegatedALSBConfigurationMBean Operation: invoke , Target: getRefs
         at weblogic.management.mbeanservers.internal.SecurityInterceptor.isAccessAllowedInvoke(SecurityInterceptor.java:1173)
         at weblogic.management.mbeanservers.internal.SecurityInterceptor.checkInvokeSecurity(SecurityInterceptor.java:813)
         at weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(SecurityInterceptor.java:443)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanServer.java:323)
         at weblogic.management.jmx.MBeanServerInvocationHandler.doInvoke(MBeanServerInvocationHandler.java:544)
         at weblogic.management.jmx.MBeanServerInvocationHandler.invoke(MBeanServerInvocationHandler.java:380)
         at $Proxy154.getRefs(Unknown Source)
         at com.csg.cs.services.tech.TECH_RegistryService_1_RegistryPortImpl.getServiceRef(TECH_RegistryService_1_RegistryPortImpl.java:224)
         at com.csg.cs.services.tech.TECH_RegistryService_1_RegistryPortImpl.lookup(TECH_RegistryService_1_RegistryPortImpl.java:117)
         ... 63 more
    And so I want to setup the JMX policy to give the rights to my client. But in the JMX Editor the ALSBConfigurationMBean doesn't exist, and I don't know which bean I have to set up.
    Anyone do know where I can find how to define policy for the Operation "getRefs" of the "ALSBConfigurationMBean" ?
    thanks and regards

    OEG provides several filters for encryption (XML, S/MIME and PGP). It's also possible to accept client certificates via 2-way SSL or route to a destination over 2-way SSL. For further information check out the OEG docs.

  • How to configure MWST -IN for the first time

    Dear Pals,
    I have newly installed SAP SD, MWST is not configured in  the software, please let me know how to configure MWST.
    2. Country India is too not there in the Tax Country list, how do I configure.
    3. If I need to configure two tax procedure, to be poped up in master data, how do I configure.  Request detailed configuration help.
    Regards
    Madhu

    Hi Madhu
    1. MWST is not a condition type defiend fro India
    2. You are unable to Find Country India , because the CIN Version ( Add on ) is not patched in your R/3 System
    Now coming to the MWST configuration
    MWST is the Condition type used to determine the tax.
    ( Same as Pricing , the configuration)
    YOu need to maintain condition records based on
    Customer Tax Classification ( Maintained in Customer Master)
    Material Tax Classification ( Maintained in Material Master)
    Destination Country
    or Domestic sale( no need for destination country)
    the same MWST is picked in your p[ricing procedure.
    Each Condition record needs to have the Tax Code
    e.e
    Local sales Tax 4%
    Central Sales Tax 10 %
    the we create this in FTXP transaction.
    Regards
    KRSNA

  • Configuring Fault Message For the Send Synchronous step

    Hi,
    PI receives a file and sends a soap request to Third pary system. If the data sent to third party system is correct, PI receives a empty soap envelopre. If the data is not approriate, PI receives an fault message(Application Error).PI has to trigger an email in either case.
    I have configured a send synchronous step to initiate Request/Response with a validation fault, followed with send step for triggering an email.once the interface is executed, The process is not moving further from Send synchronous step.In short the steps after send synchronous are not being executed.
    Regards,
    Kiran.

    Hi,
           I have created exception branch if PI receives a validation fault. PI will trigger success email, if the PI receives blank response from third system.PI will trigger failure email, if PI receives a fault message.
    Regards,
    Kiran.

  • How to configure group policy for emet via a command line

    I have been tasked with installing emet on 50 servers that I only have access to with our patching server (so I can't remote in and open the gpedit gui). I can get it to install, but now the problem that I'm facing is I need to enable 6 of the group policies
    for emet. Is there a way to do this while installing it? or a way to do it after the install?

    cmd line you need to deal with is in the C:\Program Files (x86)\EMET 4.1 folder
    specifically emet_conf --refresh would tell the systems to pull in the settings from a GPO they have already applied.
    In a non - SCCM environment I would probably recommend using group policy preferences and create a task scheduler item on your servers that runs emet_conf --import
    \\fileserver\settingsfile.xml on some sort of automated basis. Then you can just configure a client like you need and run the emet_conf --export
    \\fileserver\settingsfile.xml whenever you need to change a mitigation etc and the clients will pick up on the change on their next run of the task scheduler item.
    In general installing on servers isn't a great idea and is not the intended use case for emet however if you are DoD/Gov then DISA has mandated it so won't argue there.  There's also the people that still have Internet access from servers so then it
    would make sense in that environment as well.
    CSS Security Support Engineer (FCS/MBSA/WUA/Incident Response/FOPE) Check out my blog http://blogs.technet.com/kfalde or better yet check out http://technet.com/wiki and start contributing :)

  • HT201320 How about configuring Mac mail for the iPhone?

    I had tried to add my Mac mail to receive emails
    But I have been asked to provide outgoing and
    Incoming servers which I do not have an idea about it.

    Contact your mail provider for these instructions/settings. They should have a web page showing this information.

  • How To Install and Configure External Drivers for the JDBC & JMS Adapters

    Hello colleagues,
    Please I need a How To Install and Configure External Drivers for the JDBC & JMS Adapters version 7.10.
    VERSION 7.10.
    BBDD ORACLE - ojdbc14.jar
    Regards.

    Hi ,
    Uisng  Java Support Package Manager (JSPM) to deploy com.sap.aii.adapter.lib.sda file,
    refer this two links,the procedure available how to deploy using JSPM.
    http://help.sap.com/saphelp_nwpi71/helpdata/EN/33/e6fb40f17af66fe10000000a1550b0/content.htm
    http://help.sap.com/saphelp_nwpi71/helpdata/EN/1f/c45b4211aac353e10000000a1550b0/frameset.htm
    Regards,
    Raj

  • Configuring group policy for user profiles in Windows Server 2012 R2 Domain

    Requesting some experts advise on configuring group policy for user profiles.
    We will be building new Windows Server 2012 R2 Domain Controllers (Domain of 400 users).
    The settings which I am concerned:
    1. Folder Redirection: Desktop, Documents, Favorites.
    2. Quota for Folder Redirection - 1 GB per user.
    3. Map a networked drive - 1 GB per user.
    4. Roaming profile - (Will ignore if it does not suit our requirement). 
    The question is how outlook profile will be retained / automatically moved if the users move from once computer to other?
    FYI, E-mails hosted on MS Office365 and OST file size of few users more than 25GB. So, in case the user moves from one computer to other, the entire mailbox will be downloaded via internet. This consumes high bandwidth if more than 3-4 users shift per day.
    Thanks a lot for your valuable time and efforts.

    Hi,
    >>The question is how outlook profile will be retained / automatically moved if the users move from once computer to other?
    This depends on where our outlook data files are stored. If these data files are stored under
    drive:\Users\<username>\AppData\Local, then these files can’t be redirected, for folder redirection can’t redirect appdata local or locallow.
    However, regarding your question, we can refer to the following thread to find the solution.
    Roam outlook profiles without roaming profiles
    http://social.technet.microsoft.com/Forums/office/en-US/3908b8e0-8f44-4a34-8eb5-5a024df3463e/roam-outlook-profiles-without-roaming-profiles
    In addition, regarding how to configure folder redirection, the following article can be referred to for more information.
    Configuring Folder Redirection
    http://technet.microsoft.com/library/cc786749.aspx
    Hope it helps.
    Best regards,
    Frank Shen

  • How to configure fault exception

    I have a scenario rfc to soap,even if the input  data from rfc is worng or unauthorised than inspite of rfc going to dump,i want a msg like unauthorised even the scenario is failed..i think this can be possible by creating fault exception error....
    I have an error in moni this error is because of unauthorisation...
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?> - <!-- Call Adapter --> - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"> <SAP:Category>XIAdapter</SAP:Category> <SAP:Code area="PARSING">ADAPTER.SOAP_EXCEPTION</SAP:Code> <SAP1 /> <SAP2 /> <SAP3 /> <SAP4 /> <SAP:AdditionalText>soap fault: [Security:090304]Authentication Failed: User  javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User denied</SAP:AdditionalText> <SAP:ApplicationFaultMessage namespace="" /> <SAP:Stack /> <SAP:Retry>M</SAP:Retry> </SAP:Error>
    In Message monitoring
    SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: [Security:090304]Authentication Failed: User  javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User  denied
    Can any please tell me how to configure fault exception in my scenario...

    Hi
    Go thro the following links for knowing things about Fault Messages.
    Fault Message Type
    http://help.sap.com/saphelp_nw04/helpdata/en/5d/a45c3cff8ca92be10000000a114084/frameset.htm
    hope this helps.
    regards,
    P.Venkat

  • How to configure Email notification for User login's in Exchange Infrastructure?

    How to configure Email notification for User login's in Client Machines?

    Hi ,
    Based on the description , you need to assign logon scripts to the end users via group policy and also use your exchange server as the smtp server in that logon script to relay emails to the internal recipients.
    Thanks & Regards S.Nithyanandham

  • How to configure release procedure for rate contracts release

    Dear all,
    How to configure release procedure for rate  contract following are the requirements
    they are two release codes c1 & c2 <=100000,>=100000
                    if  c1 is not there c2 has to be approved
         Change in the value of the rate contract contract
         Change in the validity of the rate contract
         Addition of deletion of line items
    While using a non u2013 released rate contract in the PO an error message should shoot out.
    Also the logic should be changed while using the rate contract in the PO.
    The usage of the rate contract should be till the validity of the rate contract. i.e. the measurement should be end date of the rate contract and the PO creation date and not the delivery date of the PO. &
    It should be possible to refer existing valid rate contracts in purchase orders.
    Regards,
    bhaskar

    Hi,
    In SAP rate contract is known as value contract denoted with wk. The release procedure for rate contract is same as that of other contracts and scheduling agreements. The tables  for contracts will vary with SA (Scheduling agreement) .You may try and maintain condition records based on the customer combination and maintian the validity date of condition records as per your requirement.For contract and PO will have the same header/item table as EKKO/EKPO, and the release
    class in standard is the same FRG_EKKO, you can use the same for contract.
    To distinguish if it's a contract or PO, EKKO-BSART can be used.
    For contract EKKO-BSART will be MK or WK, while PO will have NB/UB etc..
    You can restrict the document type to set up the release strategy for only contract.
    Of cause, you can also create your own release class Z* for contract copying standard
    one FRG_EKKO via CL01/Class type 032, and then assign the class Z* to customizing:
    OLME:
    -> contract
    ->Release Procedure for Contracts
    ->Define Release Procedure for Contracts
    ->Release Groups
    If you have already created the PO release class.
    Assign a new chracteristic of Document Category -BSTYP
    Please check below link for detailed release procedure. I hope this wil help you out .Thanking you.
    http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE#RELEASEPROCEDURE-TABLESUSEDFORRELEASEPROCEDURES

  • How to configure Broadcast messaging for IC Webclient profile

    Dear all,
    How to configure Broadcast messaging for IC Webclient profile. what are the prerequisites for it?
    We are not using EP interface for IC Webclient, then where can I find broadcast messaging URL in SAP CRM system.
    I have checked for the relevant BSP application, but could not find.
    Please help me to configure the scenario successfully, your help will be highly appreciated.
    Best regards,
    Raghu ram

    Hi raghu
    In CRM Broad cast messaging application is CRM _BM,
    Go to easy access u2013 go to favourites u2013 select add other objects - select BSP Applications- then select CRM_BM Application.
    Select that BSP application and test it u2026
    `
    Regards,
    Narsimha

  • How to use fault ploicies for DB adpter

    Hi
    Can fault policies applicalble to DB adapter. I added the porttype of DB adpater wsdl in fault-bindings.xml. while executing the DB adpter bpel i am getting a remote fault (bcoz i stopped database)and its not retrying just errored out. Can anyone explain on this
    Thanks In Advamce
    Srikanth

    Hi
    Is there something in the log file concerning handling of the fault ?
    In my logs i can see only this error "Caused by: com.oracle.bpel.client.delivery.ReceiveTimeOutException: Waiting for response has timed out" bcoz i stopped my database
    Added the below portType in fault-bindings.xml
    <portType xmlns:db="http://xmlns.oracle.com/pcbpel/adapter/db/insert/">db:insertdata_plt</portType>
    but i am unable to retry this process
    for Fault policy added the following
    <faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension" name="bpelx:remoteFault">
    <condition>
    <action ref="ora-retry"/>
    </condition>
    </faultName>
    <!-- Fault if location port is not reachable-->
    <faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension" name="bpelx:bindingFault">
    <condition>
    <action ref="ora-rethrow-fault"/>
    </condition>
    </faultName>
    </Conditions>
    <Actions>
    <!-- This action will attempt 8 retries at increasing intervals of 2, 4, 8, 16, 32, 64, 128, and 256 seconds.
    -->
    <Action id="ora-retry">
    <retry>
    <retryCount>3</retryCount>
    <retryInterval>30</retryInterval>
                                            <retryFailureAction ref="ora-human-intervention"/>
    <!-- <exponentialBackoff/> -->
    </retry>
    </Action>
    thanks for the help

  • How to set password policy for apps users

    Hi All,
    Can anyone please help me.
    I am working on apps 11i.
    How to set password policy for users
    Thanks

    Check Note: 189367.1 - Best Practices for Securing the E-Business Suite
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=189367.1

  • How to configure which changes in the document triggers Event Handler again

    Hi Experts
    Due to some reason after creation of Purchase Order, the event handler is not created in EM system. Now is there any way to resend this PO to EM? For example, is it possible to trigger Event Handler by changing some field in PO? If it is possible that way, Could you guide how to configure which changes in the document (PO/SO/Delivery/Shipment) can trigger Event Handler in EM system?
    Thanks
    Ravi

    Hello Ravi,
    if you change the PO Header/Item the respective EH  should be created if the Relevance condition is fullfilled.
    I'm not sure if it also works in the case that you change the PO Header and EH for PO Items will be created.
    Best regards,
    Steffen

Maybe you are looking for

  • Safari crashes every time I open it.  Help

    ipad 32 3g Safari crashes every time I open it. Help

  • About to panic! need urgent help with Notes!!!

    I had this huge collection of very important notes which are now all gone thanks to a bug in Mountain Lion! The notes app in mountain lion was showing two copies of each note. So i disabled the icloud notes from system preferance. now i could see onl

  • Problems with the USB Super Multi-Burn​er Drive (LS)

    I allready used the Drive and it worked fine but today I wanted to try how well Red Alert 3 would run on my X200. But when I put the DVD into the drive in begann to spin and then span down and up and down and it did not recognise the DVD. It just con

  • Change phase of all system contracts to "executed"

    Hi We are working on SAP e sourcing 5.1/ CLM 2.0. Here we are doing a clean up exercise wherein we want to move all the existing contracts to "executed" state. PS we have defined 6 phases of the contracts i.e Internal Draft Preparation Internal Revie

  • Audit WMI Repository. Record all namespace removal events.

    Hello, Every night some of the namespaces in my WMI repository are removed by an unknown source. I have enabled WMI auditing and "Other object access events" in order to populate the security log with WMI access events. The unfortunate thing is that