How to configure for Internet access from USB EV-DO wireless broadband stick
I have WRT120N and I installed it in my office which has three computers (wired) that I've connected to the WRT120N. They all can communicate with one another. What I need to do is share the EV-DO connection (USB Stick) I have on of of these computers with the others and also with the devices that connect over the Wi-Fi.
Thank you!
Nahom
Are you trying to share the Internet connection using EV-DO and WRT120N?
Similar Messages
-
How to configure Redundant Internet Access on WIndows Server 2008 R2
I have a Windows Server 2008 R2 machine running in my basement. I have an application installed on it that calls a web service out on the open internet on a periodic timer. Everything works great until my ISP goes done.
For redundancy I got a second connection into my basement from a different ISP. I want to now configure my service to use the first ISP until it goes down and then automatically switch to the second ISP.
I have installed a second NIC card into the server. However, I need some help in configuring the redundant set up I am after.
For example it isn't clear to me if these separate NICs should be configured on the same subnet?
The other complication is that this server is infact the DC for my domain. Not sure if that complicates things or not.
I do RDP into the server remotely currently, so there is another potential complication (would need to enable that through both ISP router/nic. However, please note that other than the inbound RDP traffic, I am only interested in having the "outbound"
web service traffic redundant at this time - that is I am only using the machine as a client in this scenario).
I have read up on Multi-homing and just feel this is overkill for what I am trying to accomplish. All I want is for the internet to still be reachable from the machine via automatic switch over if my primary ISP goes down.
Thanks in advance for any and all help in configuring this correctly.
RodHi Rob,
Thanks for posting here .
TMG could help to implement internet redundancy feature with using maximum two ISP connections:
Planning for Internet service provider high availability
http://technet.microsoft.com/en-us/library/dd897038.aspx
We can get more detail introductions form TMG/ISA forum If are interesting in this feature.
http://social.technet.microsoft.com/Forums/en-US/Forefrontedgegeneral/threads
Deploying other dedicate third party devices that support this feature is also a good choice .
Regards,
Tiger Li
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
WRT54G configuration for internet access using Lacie Network Space Max
Please HELP!!!!
I have tried for the past 2 weeks trying to configure my router WRT54G so it allows me to access the Lacie over the internet without luck. I have followed every instructions from Lacie and every other FAQs and help on the internet, still no luck. I have spent numerous days with Lacie tech support and they could not figure it out - why my router would not allow me access over the internet. I am hoping that the big guns here can help me.
I have a number of laptops connected wirelessly to my local network and every laptop can access the Lacie NAS hardwired to one of the ports on my router. My entire system works wonderful locally.
The Lacie has been assigned a static IP of 192.168.1.199
My local network has a starting IP of 192.168.1.150 and ends at 192.168.1.199
My router's IP is 192.168.1.99
I have assigned port forwarding for my Lacie (192.168.1.199) for ports
20, 21, 25, 80, and 443.
I have tried other setups but no help. Please help!!!
Happy New Year!!!
Solved!
Go to Solution.Scrooge... thanks!
My NAS has ftp enabled. Access to the network is excellent throughout my local network. Every PC, wirelessly, can access everything on the NAS without any problem. Even when using the web browser using the IP or the dyndns.org assigned to the NAS. (I signed up for a free dynDNS)
The NAS can be accessed throughout the local network using explorer (under the network directory) and also by mapping the drive. The NAS can also be access using the web browser by either through its assigned IP (192.168.1.199) or by using the NAS's dyndns.org web address (web access requires login since it accesses the Network Space Max web page) - both by http and/or by ftp
My problem is accessing it through the internet outside my local network, i.e. from my work place or any other place away from home. The ability to access my data away from home is what I really wanted to be able to do.
"Open the setup page of the router and go to Status tab. Note down the Internet IP address.
Open the Internet browser and in the address bar type http://Internet_IP_address:21 or ftp://Internet_IP_address .
See if that works for ftp server."
Using the router's IP address for both format, http and ftp - I am not getting connected, even in my local network. Using NAS's static IP 192.168.1.199, I am able to access only using the ftp format. http://192.168.1.199:21 does not take me anywhere, but without the :21 takes me to the login page.
Again, thanks for all your help.... I am lost and I need your HELP!
v/r,
abelts -
i ave an ipad 2 with wifi only, can i get internet access from any cell phone, or do i need a specific phone or type of phone
I received an iPad 2 for Christmas (the 1st Apple item I've ever owned!) and own a Nokia N95 8GB mobile (that's pretty much on its last legs/ready to die any day).
On the Nokia I've got 2 apps (downloaded from/via Nokia's 'Ovi' app store): JoikuSpot & HandyWi. Both are the free versions.
I've not used HandyWi much - if at all - but JoikuSpot has been great. Basically, it creates a wifi hotspot (as pjl123 mentioned) in a couple of straightforward steps, and allows a few devices to be connected. It displays who/what is connected at a given time - so you can check if the guy having coffee behind you is piggybacking your hotspot or not! - data packets sent received etc.
The paid version has the benefit of allowing you to secure the hotspot and other security features. Their website is www.joiku.com, FYI.
Given how slow behind the 8 ball Nokia has been, their phones are getting cheaper and cheaper - given Joiku's meant to work with Nokia S60, Symbian ^3, Maemo, Meego & Sony Ericsson S60, this might be a cost effective option.
Ps. Ah! One more thing - Joiku's website specifies that 3G must be used; that WAP will not work. Good luck, enjoy! -
I have a mac mini server which I want to set up for remote access from windows and mac pcs. How do I do this. I can access it form my home network OK
Posted in error.
-
Hello Guru's,
Request for information on smart documentation on the integration between Trade Promotion Management and SCM-Demand Planning from an architecture perspective how to configure for the give senario where we from APO demand planning, we provide baseline forecast into TPM and from TPM promotions values can be considered in to APO demand planning: can anybody give me some insight on it.
Thanks in advance.
KumarHi Praveen
There are several ways you can connect a DP system to a TPM. How are your interfaces and systems setup?
Option1:
Extract the baseline from APO to a BW cube, extract the data out of BW, may be using infospokes/open hub and pass it on to TPM.
2. Have a custom program written in APO-DP to extract the selected keyfigure data at the aggregation level into an interface or a .txt file into APO directory and use some data transfer service such as EDI to take this data and send to TPM.
In my experience it is simple to define an integration process. The much larger and complicated aspects are the date adjustments and the aggregation levels.
Date adjustments:
Understand the basis of the data in APO and TPM. APO is usually at the requested delivery date or material availability date ( when the customer like a store wants the product). However TPMs are usually at the consumption date ( when an end customer like you and me but from store shelf). Depending on the product and business style this can mean several days difference. Let's say it is 25 days on average, you need to add 25 days to APO base line date to get the TPM consumption date.
Aggregation level:
This can be product or customer. If the planning in DP is at product sku level and the TPM is at packs or brand level, you need to aggregate the data up before loading to TPM. The same with customer.
To me the most complex part of the integration is to understand and transform the data in a meaningful way and a strategy to sustain this integration by keeping both DP and TPM in sync in terms of master data. Also important to have a process for identifying exceptions and failures. you send baseline from DP to TPM and if it fails, how do you know? how do you trouble shoot?
Hope these help. -
How to configure the wifi access with specific time slot for kids?
how to configure the wifi access with specific time slot for kids?
Which model of AirPort base station do you have? Which version of OS X is your MacBook Pro running?
Wi-Fi access can be limited using the Timed Access feature of the AirPort routers. You would do so using the AirPort Utility. -
How will you find out no of standby databases configured for primary database from OS level
How can find the number of standby databases configured for primary database from os level
Check the alert log.
The Alert log will always have Data Guard messages in it.
Example
cd /u01/app/oracle/diag/rdbms/primary/PRIMARY/trace
tail -1700 alert_PRIMARY.log | more
Wed Nov 13 13:35:26 2013
ARC7: Standby redo logfile selected for thread 1 sequence 1164 for destination LOG_ARCHIVE_DEST_2
LNS: Standby redo logfile selected for thread 1 sequence 1165 for destination LOG_ARCHIVE_DEST_2
If you don't see messages like this it's probably not a Data Guard system.
Or search it for :
System parameters with non-default values:
Which on Data Guard system will show things like:
log_archive_dest_1 = "LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=PRIMARY"
log_archive_dest_2 = "SERVICE=STANDBY LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=STANDBY"
log_archive_dest_state_1 = "ENABLE"
log_archive_dest_state_2 = "ENABLE"
fal_server = "STANDBY"
Best Regards
mseberg -
How many ghz should I get if I plan on using my IPad2 for internet access, email, facebook and games for my daughters children?
Ghz is the CPU speed and that is fixed for each iPad model.
The GB is the number of Gigabytes of storage.
I had a 32G iPad1 and filled it up with 5000 songs, 20,000 photos and about 50 apps. It doesn't sound like you will need anything larger than that. If you are just talking about a few dozen apps and email, the 16G version should be adequate. -
Have 5 macs on an ethernet network - some wired and some wireless to a Linksys router. My provider uses static IP and DSL for internet access. I am replacing an existing Linksys router with the Time Capsule. The Static IP settings I have are IP address, Gateway, Mask, primary DNS and secondary DNS. The Airport Utility is not as straight forward as the Linksys setup. There is not a place to list gateway. Consequently I am unable to connect to the internet and am back on the Linksys router until I get this resolved. Any suggestions would be much appreciated !
You enter the static public IP address info on the TCP/IP tab within the Airport Utility. For a static address, use Configure IPv4 = Manually. You use the Router field for the Gateway address.
-
Hello,
i'd like to configure a dedicated vrf for Internet access only. On my CE router i configured three vrf (Internet, red and blue) in the vrf internet i import the route target from blue and red, and the vrf blue and red i import only the default route. Everything is working fine, only one thing bothers me, i can ping from the vrf red destinations in the vrf blue and vice versa. How can i prevent this routing?
thanks in advanced.
Alex
here the config of my router.
ip prefix-list internet seq 5 permit 0.0.0.0/0
route-map internet permit 10
match ip address prefix-list internet
set extcommunity rt 100:200
ip vrf internet
rd 100:100
route-target both 100:100
route-target import 100:110
route-tarbet import 100:120
export map internet
ip vrf red
rd 100:110
route-target both 100:110
route-target import 100:200
ip vrf blue
rd 100:120
route-target both 100:120
route-target import 100:200Hi Alex,
Given the FW is the next hop for the default route, the traffic from one vrf to the other goes through the FW and get routed back to the CE and then to the respective vrf router. You could add the rules on the FW to prevent
traffic being routed between FW.
Regards -
How to configure for remote JMS client?
I have my own Java JMS test program for performance measurements.
I am using the JNDI and JMS provider functionality of the WebLogic 9.1 app-server but my test program is just pure JMS 1.02 sender/receiver clients - ie it is NOT part of, or deployed as a J2EE application.
SINGLE MACHINE TEST
===================
In a single machine environment I was able to
- configure a JMSServer
- configure a JMSSystemModule
- configure resources for ConnectionFactories and Queue and Topics
I then made what I believe to be a 'standalone' application module copied from some mysystemmodule-jms.xml and with that I somehow worked out how to deploy it using the weblogic.Deployer tool.
The deployment apparently set up the JNDI and my JMS client could gain access to the administered objects and do what it does.
Everything works.
TWO MACHINE TEST
================
I now have a second machine.
I want to put my JMS sender client on this new machine and I want the JMS server and JMS receiver client to be unchanged from the SINGLE MACHINE TEST.
But I really don't know quite how to proceed from here...
Do I need to install the WebLogic app-server on the sender machine or is the weblogic.jar all I need?
What is necessary configuration for JNDI access on the sender machine?
Can I in fact use my original SINGLE MACHINE server unchanged as I am hoping?
I don't think I want a "thin" client because I read that performance is impacted (and these are performance tests)
Remember this is NOT a J2EE application. There is no MDB; no client-container; no descriptors etc. Maybe that makes it more complicated - I don't know.
Sorry for such basic questions but if somebody can just point me to an appropriate example or tutorial it could save me days...
Thankyou.Hi,
My problem is on similar lines. I have an applet based UI working on RMI/t3 protocol.
I am using weblogic 9.2 as my app server.
When my applet is executed on JRE 1.5x it works fine.
But when I use JRE1.4x it gives the following exception
java.lang.NoClassDefFoundError: javax/management/InvalidAttributeValueException
at weblogic.rmi.internal.Stub.<clinit>(Stub.java:21)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:141)
at weblogic.rmi.internal.StubInfo.class$(StubInfo.java:34)
at weblogic.rmi.internal.StubInfo.<clinit>(StubInfo.java:34)
at java.lang.Class.forName0(Native Method)
I have analyzed the reason for this.
the class javax/management/InvalidAttributeValueException was included in java 1.5 and above. So JRE 1.4 does not have it.
In previous versions of weblogic this class was a part of their 'weblogic.jar' file and in weblogic 9.2 it is not a part of weblogic.jar file so when I am using JRE1.4 and weblogic 9.2 then it obviously does not find this class hence the above exception.
I tried to put this all together and made custom made client jar file incliding the necessary classes. I was able to get throght this exception only land up in following exception.
java.lang.VerifyError: class weblogic.utils.classloaders.GenericClassLoader overrides final method .
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Source)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at weblogic.jndi.WLInitialContextFactoryDelegate.<clinit>(WLInitialContextFactoryDelegate.java:204)
at weblogic.jndi.spi.EnvironmentManager$DefaultFactoryMaker.<clinit>(EnvironmentManager.java:26)
at weblogic.jndi.spi.EnvironmentManager.getInstance(EnvironmentManager.java:48)
at weblogic.jndi.Environment.getContext(Environment.java:307)
at weblogic.jndi.Environment.getContext(Environment.java:277)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
at javax.naming.InitialContext.init(Unknown Source)
at javax.naming.InitialContext.<init>(Unknown Source)
I really need to support clients using Jre 1.4 and Jre 1.5
I will really appreciate any help on this one.
Please advise.
Thank you all. -
Using 2nd Built-In Ethernet port for internet access?
Hello,
I have a Quad-G5 running 10.4.8. In its current configuration, all its network communications, including web access, go over the active ethernet port (Built-in 1).
Does anyone know how I could use the second built-in port for internet access only? I'd like to route local traffic over the first port, but go "out" over the second.
The machine is on a corporate network, and proxy access is slowwww. I have the ability to use a direct connect to the internet, but still need to be connected locally. Any thoughts? Many thanks . . . JDEasy. Go to System Preferences > Network > Network Port Configurations and drag the port connected to the internet to the top, so that it has priority over the port connected to your LAN. This prevents DNS time-out when loading a website, but still allows LAN traffic over the other port because that traffic is most likely going to use ARP rather than DNS. For good measure, you can add your company's domain (such as "my_company.lan") to System Preferences > Network > Internal_Ethernet > TCP/IP > Search Domains.
-
For our only internet access we have a 3G wireless modem. I have since purchased a WiFi printer and router to connect all the comptuters to in the house. The PCs have no problem with using both the 3G connection and the WiFi signal at the same time to print, however, the MacBook Pro will not connect to the 3G network and the router, it will drop the internet access from the modem and attempt to connect via WiFi (which has no internet access). Is there a solution that is available to remedy this? I attempted to create an adhoc printer network, however, the macbooks again will not print off of this, only the PCs. And I'm getting a bit frustrated overall with this.
The 3G wireless modem is on one of the PC's correct?
Why don't you pass the Internet through the Ethernet port to the router via Cat5 cable, then have that transmit a Wifi signal that everything else can use, then connect the printer to the router for print sharing?
You would have to turn off the wifi on the comptuer with the 3G modem as it's physically connected to the router and can't connect to the other machines as they are all connected to the router for sharing.
The Mac has the ability to pass, Internet Sharing in the System Preferences.
Do you have software for the Mac to run the 3G modem? -
User Authentication for Internet access
Hi,
Is it possible to configure authentication for internal (LAN) users to Authenticate (local/RADIUS/LDAP) for any kind of internet access through the ISA550/570? (like cut-through authentication proxy in ASA.)
And Can the ISA550/570 act as a Web proxy?
Thanks in advance.HI Sulu,
You can configure captive portal for internal LAN users to authenticate (local/Radius/LDAP) for internet
access through ISA500. (see attached screenshot)
ISA500 cannot act as a web proxy. what is your use case ?
Regards,
Wei
Maybe you are looking for
-
HT1766 How do I back up my iPhone4 to iTunes
I have iPhone 4. Online instructions say to back up to iTunes, plug device into computer, then select File>Device>Backup. Where is the page that shows files? Am I looking on computer for Files or on phone?
-
Internal outlook client connectivity in exchange 2010 when coexist with exchange 2013
Hi all , on my side i would like to clarify few queries. Say for instance i am coexisting exchange 2010 with exchange 2013 .Unfortunately if all of my exchange 2013 servers goes down . Q1 .On that time will the internal outlook users having their mai
-
ALV download to EXCEL -- probs with SAPGUI 6.40 and EXCEL 2007
I have a method in an ALV grid which performs a dowload to excel Here's the method method download_to_excel. field-symbols: <fs0> type standard table, <fs1> type standard table. assign g_outtab1->* to <fs0>. assign g_fldcat1->*
-
Recovering System datafile with no backup.
Hello Everyone, I am simulating a scenario where in i lost a system datafile and i dint take any back up. The database i sin archive mode.Now i wanted to recover the database.I have googled everywhere and tried different things,but i am not able to r
-
The error 25581 occurred When I try to Launch SCC Provider
Please tell me the meaning of error 25581. Thanks.