How to configure FXO and FXS port?

hi,
can anyone help me on how to configure FXO port on 2820 router and FXS port on 2810.
What are the things i need to configure to make a voip network that connect to PSTN network and PBX?

hi
do refer this link which can provide you fair idea to get started with your configs.
http://www.cisco.com/en/US/partner/tech/tk1077/tech_configuration_examples_list.html
regds

Similar Messages

About fxo and fxs poblems.

Hello all
I have a question about fxo and fxs .
My lab is very simple but have some problems.
analog phone ==> R1-Voice-GW (FXO port 0/1/0)<=====> (FXS port 0/2/1)R2-PBX ====> analog phone
My config setting as the below.
R1-Voice-GW
##phone number 1001 / FXS port 0/2/0
dial-peer voice 1001 pots
destination-pattern 1001
port 0/2/0
dial-peer voice 2001 pots
destination-pattern 2001
no digit-strip
port 0/1/0
R2-PBX
##phone number 2001 /FXS port 0/2/0
dial-peer voice 2001 pots
destination-pattern 2001
port 0/2/0
dial-peer voice 1001 pots
destination-pattern 1001
port 0/2/1
Question : I can call from 1001 to 2001 but can't call from 2001 to 1001 . Do I need to add any config on R1 or R2 ?

You need plar command on the FXO voice-port to point to the DN as FXO port will not receive the DNIS.
Chris
Sent from Cisco Technical Support iPhone App

How to configure listener and tnsnames.ora on 10g version

how to configure listener and tnsnames.ora on 10g version

If you are on linux platform, on command prompt execute netmgr and configure listener fromt there. Or go to $oracle_home/network/admin/listner.ora write the following
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
For tnsnames.ora write the following
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
)

How to configure modem and connect internet and play mp3

Hello friends
I am using sun solaris 8 intel edition .
I am using windowsXP,RedHat Linux and Sun Solaris 8 Intel Editon. I am using Internet on windows and linux platform but i cannot find any device configure tool in solaris 8 , So Please tell me how to configure modem and commands for connection internet and It is possible to play mp3 songs on solaris
Thaking in Advance
Piyush Patel
PI Solution

Look at the manual for pppd. Also take a look at OSS for sound card support (http://www.opensound.com) and xmms for your MP3 audio (http://www.xmms.org)

How to configure, push and test Idoc from XI to R/3

Assuming mapping between imported Idoc and some file structure is fine ,I have to configure XI and R/3 for pushing Idocs from Xi to r/3. I have to make sure they talk.
-I have done this long time ago for pushing Idocs from R/3 to XI but I wonder if it is same procedure or it is different ?
-Can someone tell me - how to configure both for this purpose partner profiles , logical systems etc ?
-And also after configurations , how I can check if Idocs is received from Xi and the entire process is successful?
-does it make difference the type of Idocs during the configurations?
-Are the test for success same for all type Idocs?
Thanks all !
Jon

Here are the steps:
===========================
First - Maintain the Sender R/3 System:
SM59 : Create a RFC destination to XI
WE21 : Create a TRFC Port ->Specify the RFC Destination Created
BD54 : Create a Logical System for the Idoc Receiver
WE20 : Create Partner Profile ->Maintain Outbound and the Inbound Parameters
Second - Log on to XI System:
SM59 : RFC Destination for Sender System
IDX1 : Create the port to get Idoc Metadata from Sender System ( The Port Name must match the port name in the idoc header - Usually in format SAP<System ID>. eg. SAPID1 [Optional Step. Not mandatory]
IDX2 : Maintain the Idoc Metadata. This is needed only by XI, and not by other SAP systems. IDX2 is needed because XI needs to construct IDoc-XML from the IDoc. No other SAP system needs to do that.
To Enable Acknowledgement:
SXMB_ADM ->Integration Engine Configuration ->Specific Configuration ->Add New entry -> Select parameters as:
Category: RUNTIME
Parameters: ACK_SYSTEM_FAILURE
Current Value: 1
Additional References
Ale Configuration for pushing Idocs form SAP to XI
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi

How to configure Grandstream GXW400X FXS Analog Ga...

I would like you to help me to configure Grandstream GXW400X FXS in order to work with skype. I have done all the required steps to enable the SIP account but is still not working. I have made an account, i bought an online number and i have got a callerid. Then, i got the registration details (SIP User ID,Password,Skype Connect address,UDP Port) and i used them in Grandstream nterface.But in skype manager environment and in sub-directory in authentication details tab i still get this message: SIP user is not yet registered at sip.skype.com. What is going wrong?Grandstream is connected in Vigor router.
Thank you in advance!

Hello onlinests,
Well, I was just looking at your account and I see that you are Connected and Registered. You must have figured it out! Great! I see calls coming in and calls going out. If this is not correct, please let us know.
You can contact our Skype Enterprise Support Team 24/7 and talk to one of our Engineers. Log into your Skype Manager and click on the Chat Button in the top right of that screen and you will be connected to us live.
If you are all good, please let us know here too.
Thank You for using Skype and the Skype Community Forums.
Regards,
Victor S.
Skype Enterprise Support

How to configure oracle and ms-access db

Hi All,
I have a requirement to push data from the oracle to ms access. My oracle database is on the Unix server and ms access is on my local desktop. Is there a way to configure if so how to configure both the db? Basically I am wanted to make the ms access visible to oracle so that I can use the Heterogeneous package. Please let me know if there are any different ways.
my oracle version is
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
ms-access 2007
Thanks in advance.

Hi,
You could use the Database Gateway for ODBC (DG4ODBC) to do this. It uses a third party ODBC driver to make the connection to MS-Access so the best option would be to install it on the Windows machine where Access is running and use the Microsoft Access driver.
Otherwise, you could install on Unix where Oracle is running but I don't think there is third party Access driver for Unix.
The following note available in My Oracle Support describes the setup on Windows -
Note.466225.1 How to Setup DG4ODBC (Oracle Database Gateway for ODBC) on Windows 32bit
You should install the latest 11.2 DG4ODBC and this note has pointers to the download sites -
Note.1083703.1 Master Note for Oracle Gateway Products
DG4ODBC can be installed standalone without an RDBMS being installed.
Regards,
Mike

[SOLVED] How to configure prosody and jitsi to work together?

Hi,
I want to use prosody to connect several jitsi accounts on different computers on a LAN. I have followed the Prosody page in our wiki to set up Prosody and some user accounts. The service starts and ss -tul indicates that it is listening on the expected ports. I have created the missing key and certificate files expected by the default setup and placed them in /etc/prosody/certs.
I have created the account foo@localhost using prosodyctl adduser foo@localhost.
In jitsi I have created an XMPP account (foo@localhost) on the same host as prosody. The account appears but it fails to connect to the server. Jitsi displays error messages on the console which indicates that the server does not support TLS connections even though these are enabled in the prosody configuration file (and lua51-sec is installed).
I have tried numerous variations of disabling encryption in both prosody and jitsi but I either get the same error message or jitsi simply hangs while trying to connect to the server.
So far the only thing that I've been able to find that deals specifically with prosody and jitsi is an episode of the Linux Action Show from last year that skimps on the details of the setup. The various online documentation that I've found seems to be for an older version or Prosody (e.g. Host entries in the configuration file).
Does anyone have a similar setup working with the latest versions of Prosody and Jitsi? If so, please share your configurations.
edit
I went through the Prosody wiki page again today and managed to get it working. I think my problem was in misconfigured paths for the SSL server certificates in the VirtualHost section.
Last edited by Xyne (2014-08-13 00:35:51)

So, i tried both ways but it still didn't work.
anrxc: i didn't know i could still prevent DNS leak without privoxy. Privoxy always blocked flash animations and videos (like youtube) here. I'll try to set up this better tomorrow when i have more time.
By the way, after following your guide, i got this when executing /usr/bin/tor:
Jan 10 19:29:16.993 [notice] Tor v0.2.1.21. This is experimental software. Do not rely on it for strong anonymity. (Running on Linux x86_64)
Jan 10 19:29:16.994 [warn] Skipping obsolete configuration option 'Group'
Jan 10 19:29:16.995 [notice] Initialized libevent version 1.4.12-stable using method epoll. Good.
Jan 10 19:29:16.995 [notice] Opening Socks listener on 127.0.0.1:9050
Jan 10 19:29:16.995 [notice] Opening Socks listener on 192.168.0.1:9050
Jan 10 19:29:16.995 [warn] Could not bind to 192.168.0.1:9050: Cannot assign requested address
Jan 10 19:29:16.995 [notice] Closing partially-constructed listener Socks listener on 127.0.0.1:9050
Jan 10 19:29:16.995 [warn] Failed to parse/validate config: Failed to bind one of the listener ports.
Jan 10 19:29:16.995 [err] Reading config failed--see warnings above.
Last edited by ILoveJapaneseGirls (2010-01-10 22:00:12)

How to configure rz20 and dswp in solution manager ?

Hi all,
I have configured the ccms agent and ccms ping in the satellite system and all the connectivity with solution manager.
but then i haven' got the idea how to configure the template in the RZ20 and DSWP ?
Please advise on document / blog etc regarding this kind of configuration ?
Thank you and Best Regards
Fernand

Hi
check below link:
DSWP: http://help.sap.com/saphelp_smehp1/helpdata/en/8e/3ad6f807e147669036d2a6aed597aa/content.htm
RZ20: http://help.sap.com/saphelp_nw04/Helpdata/EN/17/550c404a435509e10000000a1550b0/content.htm
Thanks
Sunny

How to configure Queue and QueueConnectionFactory for a MDB

Hi *,
I want to send some messages from a session bean to a message driven bean. Therefore I'll use the default Queue (sapDemoQueue) and QueueConnectionFactory.
In the ServiceLocator of my SessionBean I do the lookup with following methods:
    public QueueConnectionFactory getQueueConnectionFactory() throws NamingException {
        if (queueConnectionFactory == null) {
            Object obj = ctx.lookup("jmsfactory/default/QueueConnectionFactory");
            queueConnectionFactory = (QueueConnectionFactory) obj;
        return queueConnectionFactory;
    public Queue getQueue() throws NamingException {
        if (queue == null) {
            Object obj = ctx.lookup("jmsqueues/default/sapDemoQueue");
            queue = (Queue) obj;
        return queue;
My Message Driven Bean is configure as followed:
ejb-jar.xml:
<message-driven>
<ejb-name>ExportBean</ejb-name>
<ejb-class>de.test.ejb.abschluss.ExportBean</ejb-class>
<transaction-type>Container</transaction-type>
<message-driven-destination>
    <destination-type>javax.jms.Queue</destination-type>
</message-driven-destination>
</message-driven>
ejb-j2ee-engine.xml:
<enterprise-bean>
<ejb-name>ExportBean</ejb-name>
<message-props>
    <destination-name>jmsqueues/default/sapDemoQueue</destination-name>
    <connection-factory-name>jmsfactory/default/QueueConnectionFactory</connection-factory-name>
</message-props>
</enterprise-bean>
I also create a jms-factories.xml and a jms-destination.xml.
EAR-Project/META-INF/jms-factories.xml:
<jms-factories>
<connection-factory>
    <factory-name>jmsfactory/default/QueueConnectionFactory</factory-name>
    <context-factory-type>
      <link-factory-name>jmsfactory/default/QueueConnectionFactory</link-factory-name>
      <initial-context-factory>com.sap.engine.services.jndi.InitialContextFactoryImpl</initial-context-factory>
      <provider-url>localhost</provider-url>
      <security-principal>Administrator</security-principal>
    </context-factory-type>
    <client-id></client-id>
</connection-factory>
</jms-factories>
EAR-Project/META-INF/jms-destination.xml:
<jms-destinations>
<destination>
    <connection-factory>jmsfactory/default/QueueConnectionFactory</connection-factory>
    <destination-name>jmsqueues/default/sapDemoQueue</destination-name>
</destination>
</jms-destinations>
How to configure correctly?
Does anybody an example how to configure?
Where may I download the example of the SAP documentation at http://help.sap.com/saphelp_nw04/helpdata/en/3d/41bee546e94ad48537f2cf06a29818/frameset.htm
Thank a lot,
Juergen

Hello Vesselin
My deployment descriptors:
ejb-jar.xml
          <session>
               <ejb-name>MonatsabschlussBean</ejb-name>
               <home>de.filiadata.leistungserfassung.ejb.abschluss.MonatsabschlussHome</home>
               <remote>de.filiadata.leistungserfassung.ejb.abschluss.Monatsabschluss</remote>
               <local-home>de.filiadata.leistungserfassung.ejb.abschluss.MonatsabschlussLocalHome</local-home>
               <local>de.filiadata.leistungserfassung.ejb.abschluss.MonatsabschlussLocal</local>
               <ejb-class>de.filiadata.leistungserfassung.ejb.abschluss.MonatsabschlussBean</ejb-class>
               <session-type>Stateless</session-type>
               <transaction-type>Container</transaction-type>
               <resource-ref>
                    <res-ref-name>FdlbQueueConnectionFactory</res-ref-name>
                    <res-type>javax.jms.QueueConnectionFactory</res-type>
                    <res-auth>Container</res-auth>
               </resource-ref>
               <resource-env-ref>
                    <resource-env-ref-name>FdlbQueue</resource-env-ref-name>
                    <resource-env-ref-type>javax.jms.Queue</resource-env-ref-type>
               </resource-env-ref>
          </session>
          <message-driven>
               <ejb-name>ExportBean</ejb-name>
               <ejb-class>de.filiadata.leistungserfassung.ejb.abschluss.ExportBean</ejb-class>
               <transaction-type>Container</transaction-type>
               <message-driven-destination>
                    <destination-type>javax.jms.Queue</destination-type>
               </message-driven-destination>
               <resource-ref>
                    <res-ref-name>FdlbQueueConnectionFactory</res-ref-name>
                    <res-type>javax.jms.QueueConnectionFactory</res-type>
                    <res-auth>Container</res-auth>
               </resource-ref>
               <resource-env-ref>
                    <resource-env-ref-name>FdlbQueue</resource-env-ref-name>
                    <resource-env-ref-type>javax.jms.Queue</resource-env-ref-type>
               </resource-env-ref>
          </message-driven>
ejb-j2ee-engine.xml
          <enterprise-bean>
               <ejb-name>MonatsabschlussBean</ejb-name>
               <session-props/>
          </enterprise-bean>
          <enterprise-bean>
               <ejb-name>ExportBean</ejb-name>
               <message-props>
                    <destination-name>FdlbQueue</destination-name>
                    <connection-factory-name>FdlbQueueConnectionFactory</connection-factory-name>
               </message-props>
          </enterprise-bean>
jms-factories.xml
<jms-factories>
<connection-factory>
    <factory-name>FdlbQueueConnectionFactory</factory-name>
    <context-factory-type>
      <link-factory-name>jmsfactory/default/XAQueueConnectionFactory</link-factory-name>
      <initial-context-factory>com.sap.engine.services.jndi.InitialContextFactoryImpl</initial-context-factory>
      <provider-url>localhost</provider-url>
      <security-principal>Administrator</security-principal>
      <security-credentials></security-credentials>
    </context-factory-type>
</connection-factory>
</jms-factories>
jms-destinations.xml
<jms-destinations>
<destination>
    <connection-factory>FdlbQueueConnectionFactory</connection-factory>
    <destination-name>FdlbQueue</destination-name>
</destination>
</jms-destinations>
And I'll put mit ServiceLocator:
    public QueueConnectionFactory getQueueConnectionFactory() throws NamingException {
        if (queueConnectionFactory == null) {
            Object obj = ctx.lookup("java:comp/env/FdlbQueueConnectionFactory");
            queueConnectionFactory = (QueueConnectionFactory) obj;
        return queueConnectionFactory;
    public Queue getQueue() throws NamingException {
        if (queue == null) {
            Object obj = ctx.lookup("java:comp/env/FdlbQueue");
            queue = (Queue) obj;
        return queue;
Kind Regards,
Juergen

How to configure apache and weblogic in windows 2000

i am novice,
i want to configure apache and weblogic in windows 2000
weblogic version is 6.1
apache version is 2.0
how to do?

George,
I would take the following 'first steps'
1)Install Apache20 on your Windows machine following the Apache online documentation
http://httpd.apache.org/docs-2.0/misc/tutorials.html
2)Make sure you can 'serve up' static HTML content from your Apache Server
3)Install Weblogic Server per our online documentation
http://edocs.bea.com/wls/docs61/install/index.html
4)Also, make sure you can 'serve up' both static and dynamic (e.g., JSP) content
directly from WLS server
5)Once you have both of the above 'sanity' checks attempt to configure a simple
proxy by ppath or mime type via our online documentation
http://edocs.bea.com/wls/docs61/adminguide/apache.html#103803
Chuck Nelson
DRE
BEA Technical Support

OWB 10gR2 : How to configure ctl and log locations for Sql*Loader mappings?

Hi all,
I'm using OWB 10gR2 to load data in tables with Sql*Loader mappings.
In my project I have a datafile module and an Oracle module.
When creating an sql*loader mapping in the oracle module, there is two properties for this mappings that I want to modify. The first is Control File Location and the second is Log File Location. Values for those properties are equal to the data file module location. When trying to change those values I can only chose "Use module configuration location".
Somebody knows how to configure those properties with different locations as the one of the flat file module?
What I want to do is to store the data file in one directory, and control file and log file in other directories.
Thank you for your help.
Bernard

Hi,
You're right, my problem is that the dropdown only show the location associated with the flat file location even if I have other file locations created in the design repository.
The good news is that I have found the solution to solve the problem :
1) Edit the file module and in tab "Data locations", add the locations you want to use for control file and log file.
2) Open configuration window of the mapping and then the dropdown for properties Control File Location and Log File Location show new locations
I have tested my mapping after changing those properties and it's working.
Bernard

What is load balancer in fms cluster and how to configure it and testing fms clustering

Hey guys,
I am new to fms and clustering the fms server in origin-edge mode.But i am confused actually what is load balancer and how to configure it .
After configuring , how to test and confirm that fms clustering is working.Is there any one can help me, plz....................
thanks in Advance........

Flash Media Server does not come bundled with a load balancer. In theory, one deploys FMS in an edge/origin configuration like this
1 Origin ----> N Edges ------> Customer Traffic
The idea here is that N edges shoulder the load for most customers with a single origin coordinating resources like VOD content or script access. The issue that remains is "how do I spread customers over the N edges" and that's where load balancing comes in. Most customers use a prepackaged load balancing solution - as an Adobe staffer I can't recommend any of them over the other, but you should be able to get some recommendations here along with just googling for it. The short answer contained here though is, you're going to have to find one outside of FMS if that's needed for your setup.
Asa

How to configure verp and leih

hi gurus,
can you please tell me how to configure a verp and leih item cat to produce the billing and returnable packaging mats?
thanks,
paul

Hi
one will have to create returnable packaging materials in the material master record with item category group LEIH (item category TAL is determined).
Item Cat grp = verp , should be defined in 'Sales:sales org . 2' tab in Mat. master.Thing to be noted is you need to check "Material Type" , If it is not VERP then change it to VERP using transaction MMAM. Or just create a new one with type = packaging.
here's what I use ,to determine the delivery item category , as an example
LF / VERP / / / DLN
LF / VERP / PACK / / DLN / DLP / KEN
( DlvT/ItCG/Usg./ItmC )
hope this helps

How to configure SMTP dynamic send port?

Hi,
I am trying to configure STMP send port to send emails, enabled SMTP Server on the DEV box and configured it as described in the link below.
https://sandroaspbiztalkblog.wordpress.com/2013/05/09/biztalk-2013-installation-and-configuration-install-and-configure-smtp-server-feature-part-4/
Able to send emails using Telnet client, and these email get stored in C:\inetpub\mailroot\Queue folder.
I have a dynamic send with following values.
msgEMail(SMTP.CC) = “[email protected]”;
msgEMail(SMTP.DeliveryReceipt) = False;
msgEMail(SMTP.From) = “[email protected]”;
msgEMail(SMTP.ReadReceipt) = False;
msgEMail(SMTP.Password) = “XXX;
msgEMail(SMTP.Username) = “DDD”;
msgEMail(SMTP.SMTPAuthenticate) = System.Convert.ToUInt32(XX.SMTPAuthenticate);
msgEMail(SMTP.SMTPHost) = “smtp.domain.local”;
msgEMail(SMTP.Subject) = “sdfgdfgd;
msgEMail(SMTP.MessagePartsAttachments) = 2;
Message gets suspended with the following error message.
A message sent to adapter "SMTP" on send port "XXX_DynamicSendPort_XXXX" with URI "mailto:
[email protected]" is suspended.
Error details: There was a failure executing the send pipeline: "Microsoft.BizTalk.DefaultPipelines.XMLTransmit,
Microsoft.BizTalk.DefaultPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=81bf3856ad764e35" Source: "XML assembler" Send Port: "XXX_DynamicSendPort_XXXXX URI: "mailto:localhost" Reason: Data at the root level is invalid.
Line 1, position 1.
MessageId:
{3C50F418-24C4-4661-9B34-4B7F5F6FBBA4}
InstanceID: {2F6B9A0E-92EE-4953-81D2-9A124FAC99CE}
Please can some advise me what is wrong here? do you think I have configured
msgEMail(SMTP.SMTPHost) property correctly? Or should it be the name of the DEV box?
Thanks
SS
Shiva Sadayan

Hi Shiva,
You should not be using XMLTransit pipeline at the send port.
Perhaps you should go with default passthrough pipeline or
Create a send pipeline with MIME/SMIME encoder and drop it at Encode section of pipeline. Accept the default settings for MIME/SMIME encoder and use it with the dynamic port.
I found this article very useful while sending email from BizTalk. Refer:
Sending Emails in Biztalk
Rachit
Please mark as answer or vote as helpful if my reply does

How to configure FXO and FXS port?

Similar Messages

Maybe you are looking for