How to configure GB P60s in the SAP Portal?

How to configure GB P60s in the SAP Portal, so that they can be viewed and printed/reprinted by the employee themeselves? Will HMRC accept P60s printed on any stationeries? Also, Client does not want employee address to be available in the address section, but just the office location.

Hello
Please refer SAP note 1542870 -Electronic P60 ,where  HMRC have given employers the option of providing an electronic P60 to their employees.
Please let us know incase you know any further information.
Thanks and Kind Regards
Ramana

Similar Messages

  • HOW to configure Microsoft office in my SAP portal netweaver 7.3

    Hello Experts,
    Can any one tell me how can I configure my microsoft outlook to my Portal netweaver 7.3...??
    Regards,
    Sumit

    Hi Sumit,
    This help.sap link explains your scenario:
    Integrating MS Exchange Outlook Thick Client Using OWA - Collaboration - SAP Library
    I hope it helps.
    Regards,
    Serhat

  • How to configure bulk breaking articles in SAP retail

    hi frnds...
    This is my client needs...
    How to configure bulk breaking articles in SAP retail for hyper market..
    Scenario is like this... Ex: for MEAT
    There should be a Parent article & child articles process.
    i.e Chicken X - 100 corcoss is divide into child articles (A,B,C,D,E,F) like
    Brest bone - 5kg     - A
    leg pieces - 2.5kg   - B
    wings - 2.5kg         - C
    P - 7.5kg                 - D
    Q - 10kg                 - E
    R - wastage - 50kg - F
    these child articles wont consider for inventory
    So how to configure this scenario in SAP Article master & to run this process.
    Pl help me out with scenario

    Please have alook at
    [http://help.sap.com/erp2005_ehp_03/helpdata/en/2b/b03889df3611d1953b00a0c930e0da/content.htm]
    Material type WERT is correct.
    In Material type maintenance you can control at all if a store will be value only inventroy managmenet or both.
    Further in the Site master WB02, you can control it on MC level.
    regards
    B

  • How to add a page in the SAP Scripts

    Hi All,
    I want to know how to add a page in the sap scripts. there is already sap script developed by some other person.
    Now I have to add a page in front of that and have to add some more data.I added a page in page windows but thats not at all working.
    Please help me out in this.
    Thanks,
    Praveen

    new page will create in sap scripts using new page command.
    you have to set condition like after some number of records displayed in page new page has to be trigger.
    ex:YOU HAVE SO MANY RECORDS FOR PRINTING BUT YOU WANT TO DISPLAY 100 RECORDS IN FIRST PAGE REMAINING IN SECOND PAGE LIKE THAT.
    Here you can use NEW PAGE COMMAND .
    IT IS OPPOSITE PURPOSE OF PROTECT AND ENDPOTECT.
    Reward if useful.

  • How to add a report into the SAP-SCRIPT .using PERFORM ......ENDPERFORM

    My question is that How to add a report into the SAP-SCRIPT .
    by using PERFORM ......ENDPERFORM
    I don't know how to used it .

    Hi Sandeep,
    Please check this link
    http://help.sap.com/saphelp_40b/helpdata/en/d1/803279454211d189710000e8322d00/content.htm
    http://www.allinterview.com/showanswers/37425.html
    Calling ABAP Subroutines: PERFORM
    You can use the PERFORM command to call an ABAP subroutine (form) from any program, subject to the normal ABAP runtime authorization checking. You can use such calls to subroutines for carrying out calculations, for obtaining data from the database that is needed at display or print time, for formatting data, and so on.
    PERFORM commands, like all control commands, are executed when a document is formatted for display or printing. Communication between a subroutine that you call and the document is by way of symbols whose values are set in the subroutine.
    Syntax in a form window:
    /: PERFORM <form> IN PROGRAM <prog>
    /: USING &INVAR1&
    /: USING &INVAR2&
    /: CHANGING &OUTVAR1&
    /: CHANGING &OUTVAR2&
    /: ENDPERFORM
    INVAR1 and INVAR2 are variable symbols and may be of any of the four SAPscript symbol types.
    OUTVAR1 and OUTVAR2 are local text symbols and must therefore be character strings.
    The ABAP subroutine called via the command line stated above must be defined in the ABAP report prog as follows:
    FORM <form> TABLES IN_TAB STRUCTURE ITCSY
    OUT_TAB STRUCTURE ITCSY.
    ENDFORM.
    The values of the SAPscript symbols passed with /: USING... are now stored in the internal table IN_TAB . Note that the system passes the values as character string to the subroutine, since the field Feld VALUE in structure ITCSY has the domain TDSYMVALUE (CHAR 80). See the example below on how to access the variables.
    The internal table OUT_TAB contains names and values of the CHANGING parameters in the PERFORM statement. These parameters are local text symbols, that is, character fields. See the example below on how to return the variables within the subroutine.
    From within a SAPscript form, a subroutine GET_BARCODE in the ABAP program QCJPERFO is called. Then the simple barcode contained there (u2018First pageu2019, u2018Next pageu2019, u2018Last pageu2019) is printed as local variable symbol.
    Definition in the SAPscript form:
    /: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
    /: USING &PAGE&
    /: USING &NEXTPAGE&
    /: CHANGING &BARCODE&
    /: ENDPERFORM
    / &BARCODE&
    Coding of the calling ABAP program:
    REPORT QCJPERFO.
    FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
    OUT_PAR STRUCTURE ITCSY.
    DATA: PAGNUM LIKE SY-TABIX, "page number
    NEXTPAGE LIKE SY-TABIX. "number of next page
    READ TABLE IN_PAR WITH KEY u2018PAGEu2019.
    CHECK SY-SUBRC = 0.
    PAGNUM = IN_PAR-VALUE.
    READ TABLE IN_PAR WITH KEY u2018NEXTPAGEu2019.
    CHECK SY-SUBRC = 0.
    NEXTPAGE = IN_PAR-VALUE.
    READ TABLE IN_PAR WITH KEY u2018BARCODEu2019.
    CHECK SY-SUBRC = 0.
    IF PAGNUM = 1.
    OUT_PAR-VALUE = u2018|u2019. "First page
    ELSE.
    OUT_PAR-VALUE = u2018||u2019. "Next page
    ENDIF.
    IF NEXTPAGE = 0.
    OUT_PAR-VALUE+2 = u2018Lu2019. "Flag: last page
    ENDIF.
    MODIFY OUT_PAR INDEX SY-TABIX.
    ENDFORM.
    Best regards,
    raam

  • How to  include a report  into the  SAP-SCRIPT

    plz tell me 
    How to  include a report  into the  SAP-SCRIPT
    ASAP

    creat a z report like this....................
    REPORT  zmmgl_picklist1.
    TABLES : likp,ltap,ltak.
    data : lv_NUM1 type c .
    data : lv_NUM type c.
    *&      Form  get_data1
          text
         -->IN_DATA    text
         -->OUT_DATA   text
    FORM get_data1 TABLES in_data STRUCTURE  itcsy
                         out_data STRUCTURE itcsy.
    READ TABLE in_data WITH KEY name = 'LTAP-VBELN'.
    lv_NUM = lv_NUM1 + 1.
    out_data-name = 'lv_NUM'.
      out_data-value = lv_NUM .
    APPEND out_data.
    endform.
    *&      Form  get_data
          This form is to read  details from  LIKP    *
         -->IN_DATA    text
         -->OUT_DATA   text
    FORM get_data TABLES in_data STRUCTURE  itcsy
                         out_data STRUCTURE itcsy.
      READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
      Select single bldat from likp into likp-bldat where lgnum = ltap-lgnum.
      out_data-name = 'LIKP-BLDAT'.
      out_data-value = likp-bldat.
      APPEND out_data.
       READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
      Select single vstel from likp into likp-vstel where lgnum = ltak-lgnum .
      out_data-name = 'LIKP-VSTEL'.
      out_data-value = likp-vstel.
      APPEND out_data.
    READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
      Select single kunnr from likp into likp-kunnr where lgnum = ltap-lgnum.
      out_data-name = 'LIKP-KUNNR'.
      out_data-value = likp-kunnr.
      APPEND out_data.
    ENDFORM.                    "get_data.
    after this go to the script editor......
    /: perform get_data in program zmmgl_picklist1.
    /: using &ltap-vbeln&                 (Reference field.this field          should be there in both program and script.....)
    /:changing &likp-bldat&         
    /:changing &likp-vstel&
    /:changing &likp-kunnr&
    \[removed by moderator\]
    Regards
    Anbu
    Edited by: Jan Stallkamp on Jun 10, 2008 2:26 PM

  • How to configure which changes in the document triggers Event Handler again

    Hi Experts
    Due to some reason after creation of Purchase Order, the event handler is not created in EM system. Now is there any way to resend this PO to EM? For example, is it possible to trigger Event Handler by changing some field in PO? If it is possible that way, Could you guide how to configure which changes in the document (PO/SO/Delivery/Shipment) can trigger Event Handler in EM system?
    Thanks
    Ravi

    Hello Ravi,
    if you change the PO Header/Item the respective EH  should be created if the Relevance condition is fullfilled.
    I'm not sure if it also works in the case that you change the PO Header and EH for PO Items will be created.
    Best regards,
    Steffen

  • How many users have logged in the Enterprise portal

    Hello Expert,
    Please suggest..
    Feature required to monitor as how many users have logged in the Enterprise portal 7.0(Portal is Implemented with MDM), so that utilization can be known.
    Regards,
    Vidhanshi

    Hi,
    You can wirte the following code to get the logged in user's ID
    try {
          IWDClientUser wdClientUser = WDClientUser.getCurrentUser();
          IUser sapUser = wdClientUser.getSAPUser();
          IUserAccount[] acct = sapUser.getUserAccounts();
          String str = acct[0].getDisplayName();
          wdComponentAPI.getMessageManager().reportSuccess("user "+ str);
         } catch (WDUMException e) {
         // TODO Auto-generated catch block
         e.printStackTrace();
         } catch (UMException e) {
         // TODO Auto-generated catch block
         e.printStackTrace();
    You need security api for using it make sure that is present.
    [Find out who is login into the Portal|http://forums.sdn.sap.com/thread.jspa?threadID=1723807]
    Hope This is Help full for you!!!
    Best Regards
    Vijay K

  • Import and export MDM with the SAP Portal

    Hi,
    Would you have any clue on how to handle import and export from the SAP portal ?
    I need your help because I haven't found any standard iView to perform these functions
    The only information i got were some explanations on WebDynpro Java iViews using events to export from the Portal.
    Thank you in advance

    Hi,
    MDM iViews are only meant to perform MDM Data Manager operations but on limited basis. EP-MDM scenario has been designed for end users only which should not allow to perform complex data manager operations and they need not install MDM Clients.
    Thats why importing and exporting functionalities are not possible in standard MDM iviews.
    Regards,
    Jitesh Talreja

  • TIME on ESS/MSS with the SAP Portal, release ERP2005 ECC6.

    Hello,
    I need to implement TIME (Leave request) on ESS/MSS with the SAP Portal, release ERP2005 ECC6.
    Any informations about the customizing for a proof of concept would be appreciated.
    All the back-end (R/3) as allready been customized.
    Thanks for your responses.
    Olivier

    Hello,
    If you already have all the templates and such configured then its easy. We don't have ESS and only one MSS scenario. However we support the web environment via BSP HAP_DOCUMENT. You can include our list pages in an Iview and assign that to the ESS or MSS scenario in the portal.
    They also run stand alone, so you can test it as well without configuring the portal.
    See also <a href="/people/sap.user72/blog/2007/02/20/objective-setting-appraisals-the-web-environment bloggy</a> on OSA and the web Environment, especially the last part will be of interest for you.
    Regards and Groetjes,
    Maurice

  • Netweaver CE : How to undeploy an DC from the CE portal

    Hi,
    Please let me know how to undeploy an DC from the CE portal
    Regards,
    Thulasi

    Hi Thulasi,
    For undeploying use following URL,
    Please note for this you haveto first log on to portal using admin
    http://<server host name>:<port>/irj/servlet/prt/portal/com.sap.portal.runtime.system.console.default
    In "Archive Remover" section select your DC and click on clean, this will undeploy your DC from portal.
    Regards,
    Ameya

  • Can we achieve SSO in the SAP Portal without a third party tool

    Can we achieve SSO in the SAP Portal without a third party such as Netegrity?

    Kirk,
    Sorry I misunderstood what you were trying to setup. 
    If you want to connect the Portal to a Non-SAP Application then I believe that you would need to use a third party tool like Netegrity Siteminder.
    We have a portal that is protected by Siteminder and then we have a .NET application that is also protected by Siteminder and SSO is setup between the two since Siteminder is used.
    Hope that helps,
    Keith

  • How to configure letter of credit in SAP

    hi all,
       how to configure letter of credits (LOC) in sap.
    regards
    srinivas

    Hi,
    Letter of Credit / Bank Guarantee are noted items in SAP.  There is no effect in the books of accounts for these items.  You have to create seperate Spl G/L Indicator for LOC and assign the same to normal reconciliation account of Vendors / Customers as per your requirement. For creating this go to 'OBXT' and the necessary configuration.  To create LOC in SAP Easy Access goto F-55 and process the transaction.
    Regards
    Sarma BH

  • How to configure for GPlus Adapter with SAP Phone and SAP CRM

    Hi All Basis Adm,
                   Please consider as an urgent basis i need the information that how to configure  GPlus Adapter with SAP Phone and SAP CRM . My server is CRM 5.0 (kernel 7) with Oracle Database. This information is require to connect Webclient to Sap Phone with GPlus Adapter (Genesys Adapter 7.1).  If u have any document regarding mentioned above than that will be acceptable. 
    Regds,
    Govinda

    Hi Prasad,
    In you case, it's a file to file scenario.
    Go thro' this link for a solution:-
    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
    Regards.
    Praveen

  • How to configure E-Mail servers in SAP?

    Dear All,
    | have configured e-mail server in R/3 properly (using SCOT tcode). However, when I am trying to send mails for testing purpose (using SBWP tcode), its showing status as "send process still running". But after some time, its showing status as "error during send process" 
    can any one please  help me troubleshoot this problem? Should you need any information, kindly let me know.
    Waiting for your kind immediate responses!
    Regards,
    Faisal

    Hi Brahmankar,
    I have gone through the notes and links you have sent me. Its very helpful and informative as well. Following are my observations and understandings:
    1. As I mentioned, we are on 4.6C , therefore tcode SICF is not executable to activate SAPConnect service. Its only available on WAS.
    2. I think I have to make use of SAP EXCHANGE CONNECTOR if its R/3 4.6C. Then only I will be able to configure SMTP mail server. Because,
        note#122657 says that:
    if you are using SAP system based on WAS 6.10 or above then you should use the SAPconnect (E)SMTP
    linkage for the exchange connection. You no longer need to install the SAP Exchange Connector
    3. Can you please confirm that I have to use SAP Exchange Connector to configure SMTP mail server?
    4. There is not SMTP node in tcode SCOT ! Only I get FAX and INT nodes. How to get the SMTP node?
    you said that:
    If you are running Exchange Server 2003, and 4.6C it will be tricky.
    could you please guide and help me in making this process tricky  ?
    That would be a very great help and I am looking forward to have your kind help for the same!
    If you need any other information from my side, kindly let me know.
    Thanks and Regards,
    Faisal

Maybe you are looking for