How To Configure GP For Client DC on Windows Server 2003

Dear all,
I have been installed windows server 2003 and make one DC on my server. And i create several group and want to make policy for that each group. For example I have created '2014' group and all user who join my dc and registered as a part of '2014' group couldn't
access their browser such as Firefox and IE and couldn't access their bluetooth. How can I make it possible?
Thanks before.
Warm Regards,

Hi Denni Sembiring,
Could you clarify your question “all user who join my dc and registered as a part of '2014' group couldn't access their browser such as Firefox and IE and couldn't access their
Bluetooth”, are you want to realize to limit some user can access the specific software and computer device? GPOs can be linked to the following levels:
•Site
•Domain
•Organizational Unit
We can not link GPO to group, if you want to limit specific user can only access specific software you can refer the following KB to restrict user access.
The related KB:
How To use Software Restriction Policies in Windows Server 2003
http://support.microsoft.com/kb/324036
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

How to install HR Global patch For R12.1.1 windows server 2003?????

Dear Friends
can any one help me to install patch HR Global patch For R12.1.1 windows server 2003,
i have R12.1.1 Vision but the payroll not working so i need help,i am not DBA,please
any one can help me to tell me step by step ,or if any one have good document to share it for me.
Thanks
Omar

can any one help me to install patch HR Global patch For R12.1.1 windows server 2003,
i have R12.1.1 Vision but the payroll not working so i need help,i am not DBA,please
any one can help me to tell me step by step ,or if any one have good document to share it for me.Please see these MOS docs.
Note: 145837.1 - Latest HRMS (HR Global) Legislative Data Patch Available
Note: 307195.1 - Example - Running DataInstall and Applying hrglobal.drv
Note: 734910.1 - Can You Run Hrms Datainstall and Apply Hrglobal.Drv Once for Several Legislative Patches
Note: 300097.1 - Oracle HRMS HRGLOBAL Basics
Note: 140511.1 - How to Install HRMS Legislative Data Using Data Installer and hrglobal.drv
Note: 188698.1 - HRMS: On What Server Do I Run The Datainstall Utility And Hrglobal.Drv
Apply the hrglobal.drv patch using adpatch -- https://forums.oracle.com/forums/search.jspa?threadID=&q=how+to+use+apply+patch&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Invalid Link for 9.2.0.1 EE/SE/S/P/Client 32-bit Windows Server 2003

Hello,
The OTN download for Oracle 9i Release 2 (9.2.0.1) 32-bit for Windows Server 2003 is incorrect. This link brings you to the 9.2.0.3 PATCHSET download, and NOT the base release software.
Here is the contents of the link when followed.
"Oracle9i Database Release 2 Enterprise/Standard/Personal/Client Edition for Windows Server 2003 (32-bit)
     Download the Complete Files
          OUI220180.zip (47,405,300 bytes)
          9203WIN2K3.zip (181,643,734 bytes)
     Documentation
          Oracle9i Database Release 2 for Windows Server 2003 (32-bit) Release Notes (PDF/HTML)
     Directions
          1. Before downloading, please review the product certification information for this product.
          2. Consult the release notes for download and installation instructions."
I need to download the 9.2.0.1 32-bit Client. The eDelivery site only has the 9.2.0.1 64-bit release.
OTN Admins - please help!
Regards,
Steve

Are there any moderators checking this forum?
I called Oracle support and requested a shipment for Oracle9i for Windows Server 2003. I made sure that whatever media pack they were sending me what explicitly for 2003. It was for both 2000 & 2003 however the client/database CDs for 2003 are only for 64-bit.
If 9i 32-bit is the only certified version for AMD processors why isn't it in included the media pack? There's a nice sticker on the back that notifies you that the 32-bit software requires an additional upgrade that is available from OTN.
So, If OTN's link is bad and no one is from OTN is moderating this site then how on Earth is anyone able to aquire this software version? Oracle's Metalink offers no solution outside of posting to this forum.
-Steve

Invalid OTN Link for 9.2.0.1 EE/SE/S/P/Client 32-bit Windows Server 2003

Hello,
The OTN download for Oracle 9i Release 2 (9.2.0.1) 32-bit for Windows Server 2003 is incorrect. This link brings you to the 9.2.0.3 PATCHSET download, and NOT the base release software.
Here is the contents of the link when followed.
"Oracle9i Database Release 2 Enterprise/Standard/Personal/Client Edition for Windows Server 2003 (32-bit)
Download the Complete Files
OUI220180.zip (47,405,300 bytes)
9203WIN2K3.zip (181,643,734 bytes)
Documentation
Oracle9i Database Release 2 for Windows Server 2003 (32-bit) Release Notes (PDF/HTML)
Directions
1. Before downloading, please review the product certification information for this product.
2. Consult the release notes for download and installation instructions."
I desparately need to download the 9.2.0.1 32-bit Client. The eDelivery site only has the 9.2.0.1 64-bit release. I contacted Oracle support to have CDs shipped and they arrived today however no 32-bit client was contained inside. The sticker on the back directs you to OTN for download.
Is anyone able to help me?
Regards,
Steve

Found the solution
Steve - you need to install 9.2.0.1 for NT/2000/XP and then apply the 9.2.0.3 patch to bring it to 9.2.0.3 for Windows 2003.
It's in the release notes on that page:
http://download-west.oracle.com/docs/html/B10924_01/toc.htm
Hope that helps..

How do I add a Mac to a Windows Server 2003 or 2008 domain?

I recently started working for a public school district that runs Windows Server 2003 and Windows Server 2008 R2. There are several faculty members, myself included, that would like to get their Macs onto the domain and capable of file sharing, printing to network printers, etc. I cannot find decent instructions anywhere. Could someone please point me in the right direction or give me some directions? It would be greatly appreciated. Thanks.

I'm also new to the MAC world - I trust you were able to join the MAC's to the domain - I finally figured it out. However, I have not been able to get the MAC's to save to the Windows 2008 server where I have student folders setup. Have you been able to do this? If so can share the info with us.
Thanks,
Steve
[email protected]
Newport School District

Symantec antivirus Best practice for oracle database on windows server 2003

Hi all,
I have an oracle database server on windows server 2003 platform of version 10.2.0.4. what would be best practice of running symantec antivirus on that server as well as database file exclusions from scanning them.
My server had rebooted unexpectedly for many times. in event log i have id as 6008. what may be cause of it..?

Normally, you don't run a virus scanner on a database server because your database server isn't vulnerable to viruses. It's behind firewalls, people aren't reading mail on it, people aren't plugging thumb drives into it, etc. If you do decide that you need to run a virus scanner on a database server, at least exclude the Oracle data files from the scan. Oracle gets very unhappy if someone else tries to open its data files (or, worse, if someone opens a data file before it gets the chance to acquire exclusive access).
Justin

Configuring Active Directory with 11g and Windows Server 2003 R2

Hi people,
I'm spending some happy hours to setting up the windows domain authentication in a 2003 sever realm.
When I try to register the database in the realm (logged as total-administrator-user of domain), NETCA give me an unexpected "no message" error...
someone can help a martyr?
I saw in the event viewer this error message about ldap:
The Security System detected an authentication error for the server ldap/DbOraWin.mydomain.local.
The failure code from authentication protocol Kerberos was "There are currently no logon servers available to service the logon request.
(0xc000005e)".
Thanks all
Claudio

There are news!!
After some verifications on LDAP/AD server, now I can see something in tracelog's DBCA:
[main] [17:7:24:299] [NativeSystem.<init>:277] NullSecurityManager is set for Native System calls
[main] [17:7:24:299] [Library.getInstance:106] Created instance of Library.
[main] [17:7:24:299] [Library.load:206] Loading orauts.dll...
[main] [17:7:24:299] [Library.load:212] oracleHome null
[main] [17:7:24:299] [Library.load:227] Property oracle.installer.library_loc is set to value=E:\app\oracle\product\11.1.0\db_1\oui\lib\win32
[main] [17:7:24:299] [Library.load:229] Loading library E:\app\oracle\product\11.1.0\db_1\oui\lib\win32\orauts.dll
[main] [17:7:24:299] [Library.load:262] Loaded library E:\app\oracle\product\11.1.0\db_1\oui\lib\win32\orauts.dll from path=
E:\app\oracle\product\11.1.0\db_1\oui\lib\win32
[main] [17:7:24:299] [Library.load:206] Loading MSVCR71.dll...
[main] [17:7:24:299] [Library.load:212] oracleHome null
[main] [17:7:24:299] [Library.load:227] Property oracle.installer.library_loc is set to value=E:\app\oracle\product\11.1.0\db_1\oui\lib\win32
[main] [17:7:24:299] [Library.load:229] Loading library E:\app\oracle\product\11.1.0\db_1\oui\lib\win32\MSVCR71.dll
[main] [17:7:24:299] [Library.load:262] Loaded library E:\app\oracle\product\11.1.0\db_1\oui\lib\win32\MSVCR71.dll from path=
E:\app\oracle\product\11.1.0\db_1\oui\lib\win32
[main] [17:7:24:299] [Library.load:206] Loading orawsec11.dll...
[main] [17:7:24:299] [Library.load:212] oracleHome null
[main] [17:7:24:299] [Library.load:227] Property oracle.installer.library_loc is set to value=E:\app\oracle\product\11.1.0\db_1\oui\lib\win32
[main] [17:7:24:299] [Library.load:229] Loading library E:\app\oracle\product\11.1.0\db_1\oui\lib\win32\orawsec11.dll
[main] [17:7:24:299] [Library.load:262] Loaded library E:\app\oracle\product\11.1.0\db_1\oui\lib\win32\orawsec11.dll from path=
E:\app\oracle\product\11.1.0\db_1\oui\lib\win32
[main] [17:7:24:299] [Library.load:206] Loading orasrvm11.dll...
[main] [17:7:24:299] [Library.load:212] oracleHome null
[main] [17:7:24:315] [Library.load:227] Property oracle.installer.library_loc is set to value=E:\app\oracle\product\11.1.0\db_1\oui\lib\win32
[main] [17:7:24:315] [Library.load:229] Loading library E:\app\oracle\product\11.1.0\db_1\oui\lib\win32\orasrvm11.dll
[main] [17:7:24:315] [Library.load:262] Loaded library E:\app\oracle\product\11.1.0\db_1\oui\lib\win32\orasrvm11.dll from path=
E:\app\oracle\product\11.1.0\db_1\oui\lib\win32
[main] [17:7:24:315] [Version.isPre10i:213] isPre10i.java: Returning FALSE
[main] [17:7:24:315] [WindowsSystem.regKeyExists:1137] WindowsSystem.regKeyExists: mainkey= HKEY_LOCAL_MACHINE subkey = Software\Oracle\Ocr
[main] [17:7:24:346] [WindowsSystem.getCSSConfigType:1304] configType=null
[main] [17:7:24:346] [ca.InitialSetup.configureOPS:-1] Cluster mode is OFF
[main] [17:7:24:346] [ca.InitialSetup.<init>:-1] TNS_ADMIN is: null
[main] [17:7:24:346] [ca.InitialSetup.<init>:-1] Admin location is: E:\app\oracle\product\11.1.0\db_1\network\admin
Exception occurred during event dispatching:
java.lang.NullPointerException
     at oracle.net.ca.NetCA.returnToIntroPanel(Unknown Source)
     at oracle.net.ca.NetCA.deferLDAPConfig(Unknown Source)
     at oracle.net.ca.NetCA.createOrUpdateContext(Unknown Source)
     at oracle.net.ca.NetCA.prepareNextPage(Unknown Source)
     at oracle.net.ca.NetCA.wizardValidatePage(Unknown Source)
     at oracle.ewt.wizard.WizardPage.processWizardValidateEvent(Unknown Source)
     at oracle.ewt.wizard.WizardPage.validatePage(Unknown Source)
     at oracle.ewt.wizard.BaseWizard.validateSelectedPage(Unknown Source)
     at oracle.ewt.wizard.BaseWizard.doNext(Unknown Source)
     at oracle.ewt.wizard.BaseWizard$Action.actionPerformed(Unknown Source)
     at oracle.ewt.button.PushButton.processActionEvent(Unknown Source)
     at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
     at oracle.ewt.button.PushButton.activate(Unknown Source)
     at oracle.ewt.lwAWT.AbstractButton.processMouseReleased(Unknown Source)
     at oracle.ewt.lwAWT.AbstractButton.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Component.java:5266)
     at java.awt.Container.processEvent(Container.java:1966)
     at oracle.ewt.lwAWT.LWComponent.processEventImpl(Unknown Source)
     at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.event.tracking.GlassMouseGrabProvider$Disp._redispatchEvent(Unknown Source)
     at oracle.ewt.event.tracking.GlassMouseGrabProvider$Disp._redispatchEvent(Unknown Source)
     at oracle.ewt.event.tracking.GlassMouseGrabProvider$Disp.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Component.java:5501)
     at oracle.ewt.lwAWT.LWComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Component.java:5266)
     at java.awt.Container.processEvent(Container.java:1966)
     at oracle.ewt.lwAWT.LWComponent.processEventImpl(Unknown Source)
     at oracle.ewt.event.tracking.GlassMouseGrabProvider$Proxy.processEventImpl(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Component.java:3968)
     at java.awt.Container.dispatchEventImpl(Container.java:2024)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
     at java.awt.Container.dispatchEventImpl(Container.java:2010)
     at java.awt.Window.dispatchEventImpl(Window.java:1778)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
     at java.awt.Dialog$1.run(Dialog.java:525)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Any suggestion?
Thanks again also for only read this message!
Claudio

RDS invalid licensing Windows Server 2003 Client

I have two Windows Server 2012 Session Host Server and two Windows 2012 Connection Brokers. One Connection Broker configured with remote desktop License.We are Using License type is per device cal.
On Server A, I can access RDP from Windows 7 clients and from Windows XP clients Windows Server 2003 Clients.
On Server B I can only RDP from Windows 7 clients and Windows XP Clients NOT from Windows Server 2003 Clients). The error is"The remote session was disconnected because the remote computer received an invalid licensing message from this computer"

Hi Gyan,
Which version of client RDP you are using in your environment?
Did you receive any particular Event ID during this issue?
Here for your issue I found something to let u know, if licensing mode on the terminal server is set to Per Device but the license server is configured to issue only Per User CALs, then only temporary Per Device licenses are issued from the available pool of
licenses. The license cannot upgraded.
Please check the license is properly configured and activated. If not then you can contact MS clearing house or try to change the terminal server licensing mode.
Please refer below link for more information.
The remote session was disconnected because the local computer's client access license could not be upgraded or renewed
http://technet.microsoft.com/en-us/library/cc737592(v=ws.10).aspx
You need to verify the terminal server because it can’t able to locate the license server.
The terminal server cannot locate the license server
http://technet.microsoft.com/en-us/library/cc758805(v=ws.10).aspx
Hope it helps!
Regards.

10g R2 64-bit Oracle Database for MS Windows server 2003

we are upgrading our 10.2.03 32 bit Oracle Enterprise DB on 32 bit MS windows server 2003 to 10.2.0.3 64 bit Oracle Enterprise DB 64 bit MS windows server 2003
I got this Metalink ID
Doc ID: 403522.1 How to Migrate Oracle 10.2 32bit to 10.2 64bit on Microsoft Windows
I have searched for 10g R2 64 bit Oracle databases versions on MS windows server 2003 but din't gent any
I am not sure whether this database works for 64 bit MS windows server 2003
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201winx64soft.html
please let me know from where I can download 64-Bit 10g R2 Oracle Enterprise DB for 64-bit MS windows server 2003
Have posted in
English » Technology Network Community » Downloads section haven't seen any replies
thought of posting here
Thanks in Advance

If you are running the x64 version of Windows 2003 and not the Itanium version, you will find 10.2.0.1 here:
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201winx64soft.html
You may then patch it to 10.2.0.3 by downloading the patch from Metalink.
Charles Hooper
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.

Hey someone tell me how 2 configure tax for a US client??

hi all
i am about to go for a client interview for a US client n they expect me t be knowledgable on tax procedure.plz some one tell me how to configure tax for a US cliet n wat r the important things in tax i should be knowing as a sd consultant.plz tell me steps too.it ll be very helpful for practice
thnx n regards
anil

I'm sorry it's taken me so long to respond to your suggestions. I
haven't had the opportunity to access the computers in question for
the last few days. Although your suggestions didn't work, I would
like to assure you that I really appreciate the time & effort you
took to try & help me & hope you will make another attempt. Being
uncertain as to the proper syntax involved & how important a small
difference might make, I tried the five variations of your
suggestions below. None of them seemed to have any effect on the
two systems. One system belongs to a relative & is a fairly new
laptop running Windows 7. The other is an older desptop running XP.
Do you try or test the suggestions you make?
@namespace is:
#urlbar[level].autocomplete-textbox-container {background-color:
#FFB !important;}
@namespace url:
#urlbar[level].autocomplete-textbox-container {background-color:
#FFB !important;}
@namespace url
("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul");
#urlbar[level].autocomplete-textbox-container {background-color:
#FFB !important;}
/* *@namespace url/*
("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul");
#urlbar[level].autocomplete-textbox-container {background-color:
#FFB !important;}
<pre><nowiki>@namespace url
("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul");
/*only needed once*/
#urlbar[level].textbox-input-box {background-color:
#FFB !important;}
</nowiki></pre>

How to configure SMTP for iCloud?

I have never used the Mail program on my macs. I started using Eudora in 1995 and when Mail came along some years later, i didn't take to it, it didn't have the functionality i needed and enjoyed. Fast forward to a couple days ago, my Snow Leopard MacBook is wearing out and i got a new MacBook Pro running Mountain Lion. When i was setting up the new computer, i thought iCloud would be configured automatically. It wasn't because i have a couple of different Apple IDs but i think that is straightened out now and i'm signed in using the me.com email address and have my calendars and contacts syncing with iphone and my other computer. Mail is working, but only for my me.com email address which i rarely use. I mainly use a gmail address.
I don't want to use Mail and i don't want mail to be downloaded to it. That happened on my other computur, so that i had tens of thousands of messages in a program i never open and don't use. So i somehow turned it off so it no longer gets the mail from my other accounts. i don't want to receive email in Mail. But because i can't use Eudora in Mountain Lion, i need a new email client. Today, i downloaded and installed Mail Mate, i want to try it out. When I tried to use Mail mate to send an email i got a message saying "No SMTP server configured for iCloud." i googled how to configure SMTP for iCloud and what i found said it configures automatically. So i don't know what to do. I went to ICloud in system preferences and i don't see anything i can do there.
Is there anything i can get it to do to configure automatically? All my software is up to date, if that makes a difference.

i was persistently googling search terms for this problem and came across a link that gave information to the effect that for non Apple email clients, SMTP has to be configured manually, and the settings were provided. I entered them into Mail Mate and now it works. So thankfully, this problem is solved.

Reg: How to Configure internet for solaris 10 in x86 32 bit

Hi,
I am new to Sun Solaris can any one help me detailed step of how to configure internet for standalone pc. Thanks in Advance
Thanx
MA

OK, the classical way:
Open a terminal.
Type
ifconfig -a
ifconfig -a plumb
ifconfig -a
Note the differences, it will plumb ALL available interfaces this way. So, now you can see, which device is your network card.
Then perform a
ifconfig <interface> unplumb
for all the newly interfaces (aka those, that were new in the last ifconfig -a output).
Then, the simple way:
cd /etc
vi hostname.<interface-driver-name>0 (example: hostname.rge0, the driver would be rge, the instance is 0, and rge0 would have been displayed as an available interface in the last ifconfig command). Add the name of the host into this file.
Then
vi /etc/inet/hosts
and add the pair of IP-address and hostname.
If needed:
vi /etc/inet/netmasks
if you have a sub-divided network, and you need a differenbt subnet mask...
Then:
vi /etc/defaultrouter
and add the name or ip-adress of the gateway... (name only, if you have that name also in the /etc/inet/hosts file!)
Also:
vi /etc/nodename
and add the name of your host into that file, so that the system knows, who it is... ;-)
And: For the DNS you can then add the infos into:
/etc/resolv.conf
For example:
nameserver 192.168.2.1
or some such...
Then, as the last but one step:
ls /etc/nsswitch.*
and:
cd /etc
cp nsswitch.<what you need> nsswitch.conf (should be .files here!)
And the reboot... ;-)
HTH!
Matthias
P.S.: There might be some GUI, but I'm an old-timer, so I prefer the command-line version of things...

How to configure apache for ssl in windows platform

hi all,
can anyone help me expalin how to configure apache for ssl in windows platform.

George,
I would take the following 'first steps'
1)Install Apache20 on your Windows machine following the Apache online documentation
http://httpd.apache.org/docs-2.0/misc/tutorials.html
2)Make sure you can 'serve up' static HTML content from your Apache Server
3)Install Weblogic Server per our online documentation
http://edocs.bea.com/wls/docs61/install/index.html
4)Also, make sure you can 'serve up' both static and dynamic (e.g., JSP) content
directly from WLS server
5)Once you have both of the above 'sanity' checks attempt to configure a simple
proxy by ppath or mime type via our online documentation
http://edocs.bea.com/wls/docs61/adminguide/apache.html#103803
Chuck Nelson
DRE
BEA Technical Support

How to configure rescheduling for sale order quantities

kindly explain how to configure rescheduling for sale order quantities that are created last month. kindly explain. i am in urgent.
regards,
g.v.shivakkumar

Hi,
Short text
Rescheduling sales and stock transfer documents: by material
Description
The 'Rescheduling' program (SDV03V02) processes sales document items that are contained in the item directory for the material. It takes into consideration open items and schedule lines from stock transfer items, stock transfer scheduling agreements and purchase order requests (items only), referred to hereafter as stock transfer documents, for the materials.
All sales documents for the material that are still open are selected. This means that the material index must be activated for at least all sales document types, whose items may have requirements. All stock transfer documents or items for the material that are still open are also selected. Open in this case means for example, that there is no deletion indicator, that the item from a stock transfer purchase order request cannot be labeled as completed or that the quantity delivered and posted to goods issue for the item in a stock transfer purchase order is the same as the amount ordered. An availability check can only be carried out if a checking rule is assigned to the document type - if this is not the case, the document or document item is not checked.
Checking rule 'A' is used as a basis for rescheduling sales orders (exceptions to this are rush orders they use checking rule B, and orders with individual customer stock; they use checking rule AE). Stock transfer documents use the checking rule that is assigned in Customizing for Purchasing. It is important that the scope of checks is consistent for both the stock transfer documents and the sales documents and that they do not exclude each other, as this can lead to incorrect test results. An example of an incorrect setting would be: The scope of check for checking rule 'A' checks delivery schedules for stock transfer purchase orders and stock transfer purchase requests, however the scope of check for the checking rule for the stock transport scheduling agreement does not.
The items and schedule lines found in the selection are sorted according to 'Priorities' - document category, delivery priority, creation date of the item or schedule line (for stock transfer purchase orders and delivery plans) entered on the selection screen or according to the schedule line date of the earliest schedule line with order quantity, document number and item number and then transferred to the availability check. Priority 1 is highest priority and priority 5 the lowest. Stock transfer purchase order requests are sorted after stock transfer purchase orders and scheduling agreements, as they are less binding. This means that when you have identical sort criteria such as delivery dates, the stock transfer purchase order item is checked first and then the item from the stock transfer purchase order request.
The preset option 'Unconfirmed documents required' only carries out rescheduling for materials for which there is at least one unconfirmed transaction.
You can use the parameters 'Sorting criteria delivery date' to define whether sorting is carried out with the order quantity after the creation date of the item or the delivery date of the earliest schedule line.
If you mark the 'Simulation' field, the checked documents are not saved. Instead a results list is generated and saved. However, the availability check for the corresponding documents continues as if saving has taken place already, that is, that the simulated list corresponds to the actual one.
Under 'Options' on the selection screen, specify whether sales documents and/or stock transfer documents should be processed. For stock transfer documents you can enter whether stock transfer purchase orders and scheduling agreements should be processed at item or schedule line level:
Processing at item level:
All open schedule lines for the item are read and collected, then transferred to the availability check. To sort and prioritize documents, you do not need each individual schedule line. It is sufficient to have the item or data from the first schedule line. All open schedule lines for the item are processed and checked.
Example of processing at item level:
Sorting: Date (Delivery date first schedule line) - Document number - Document item
Doc. cat. Doc. number Doc. item Doc. schedule line Delivery date PO        4500000012      10               0001              26.01. PO        4500000012      10               0002              26.02. PO        4500000025      20               0001              28.01. PO        4500000025      20               0002              02.02.
You can see that the second schedule line for document 4500000025/20 from 02.02 was processed after the second schedule line for document 4500000012/10 from 26.02. This is because all open schedule lines for an item are read and processed. The first schedule line from 4500000012/10 has the earliest delivery date, therefore it has priority.
Processing at schedule line level:
Each open schedule line for an item is entered in document sorting in accordance with the values entered under 'Priorities'. The availability check is carried out for each individual schedule line.
Example for processing at schedule line level:
Sorting: Date (delivery date first schedule line) - document number -document item
Doc. cat.    Doc. number Doc. item Doc. sched. line Del. date PO           4500000012    10             0001           26.01. PO           4500000025    20             0001           28.01. PO           4500000025    20             0002           02.02. PO           4500000012    10             0002           26.02.
Here you can see that each schedule line was sorted according to its delivery date. Note that this type of processing requires more runtime due to the individual checks and more frequent saving.
The results of rescheduling are saved, as long as the program was not started in simulation mode. When calling up from the 'Sales' area menu or when directly starting via the development environment, the iniator is informed via a dialog box that he has just started a process that changes data. He can then decide whether or not he wants to continue.
Checking procedure for stock transfer documents:
An availability check of stock transfer documents in rescheduling is carried out in accordance with the check carried out when manually creating a document. If, however, the required quantity for a schedule line is not available on a particular date and will not be ready until later, new schedule lines are created for the stock transfer purchase orders and scheduling agreements, containing the relevant data. New items are created in this case for stock transfer purchase order requirements. The total sum of schedule line quantities for a processed schedule line corresponds to the schedule line quantity of the original schedule line.
First example: Using a stock transfer purchase order item with a schedule line:
a) Status of item before rescheduling run:
Del. date PO quantity   Confirmed quant Confirmed del. date 23.07.      50 items       0 items              -
==> This now affects the stock/requirement situation:
    - Goods issue is posted for the material in the delivering plant on the 23.07.
    - A purchase order of 10 items was created for the material in the delivering plant. Delivery is expected on the 29.07.
b) Status of stock transfer purchase order item after rescheduling run:
Del. date PO quantity   Confirmed quant   Confirmed del. date 23.07.     40 items      40 items            23.07. 29.07.     10 items      10 items            29.07.
==> The first schedule line was changed in accordance with the results of the rescheduling availability check. Only 40 of the 50 original items could be delivered on the 23.07. Therefore, a new schedule line is created for the rest on the 29.07. for 10 confirmed items.
Second example: Same output situation as the above example.
==> There is now a change in the requirement/stock situation:
A purchase order for 10 items is created for the material in the delivering plant. Delivery is expected on the 29.07. A further purchase shows another 40 planned items on the 30.07.
   Status of stock transfer purchase order item after rescheduling run:
Del. date PO quantity Confirmed quant Confirmed del. date 29.07.     10 items       10 items          29.07. 30.07.     40 items       40 items          30.07.
==> The first schedule line was changed in accordance with the result of the availability check for rescheduling. The original delivery date is set to the date confirmed in the ATP check. A new schedule line is created for the remaining 40 items, that are available on the 30.07.
Note:
Any set fixed delivery date and quantity indicators and creation indicators for schedule lines or items are 'inherited' by newly created schedule lines. Assuming that the original schedule line was fixed in the above example (since it is created manually), this indicator is also set for the newly created schedule line.
If shipping scheduling is activated for a stock transfer document type, this is also implemented for newly created schedule lines, with the exception of route schedule determination. This means that in the current version of the program no route schedule has been determined for a schedule line containing a route schedule for which new schedule lines may need to be created.
The results of the run are issued in the form of a list, which is also saved, so that the results can be controlled at a later date. This is done using the function 'Evaluate rescheduling', but it is only a good idea to do this after the first rescheduling has taken place. You can restrict selection requirements but these can however affect the runtime. You can use this function to analyze the saved list until the next rescheduling run, which writes over the result. If you start rescheduling in the background, a spool file with the result list referred to will be created in the corresponding setting. You can see this in spool management.
Output
A list of changed documents, a list of documents in which an error occurred during processing and as a result were not changed, can be called up via the menu 'Edit - Error log'. If in a subsequent evaluation a restricted selection is carried out, a note appears at the end of the list to say that not all document items are displayed.
You can set the scope of the list under the menu option 'List' in the list display. You can view improvements, deteriorations and the whole list. Before the documents can be included in one or either of the restricted lists, the date or quantity has to have changed so that the item can be contained in both the list of improved or deteriorated documents.
You can use the interface for changing transactions and the order list to navigate. Use 'Back' to exit the list and 'New selection' to return to the selection screen.
Recommendation
You should only start this program occasionally and use very restricted selectin criteria during working hours as it requires enormous system resources.
Note
The columns for 'New date' and 'New confirmed qty' only contain entries if the dates or quantities have changed.
As the system only runs the change check (dates/quantities) per line in the original list, an item whose backlog has increased in the list of improvements. This occurs, for example, if the whole quantity can be delivered at once but at a later date. In this situation, the system determines an increase for the line when it compares quantities.
Regards,
Amrish Purohit

How to configure N9 for push e-mail?

Does anybody know how to configure N9 for push e-mail? It should be possible because push email is part of Nokia's N9 official specs but I'm unable to find any reference in the manual or online.

I know that I am late to the party but just got my N9. The push email works fine for my Exchange & my Gmail but for my mail.com account (which I believe is really AOL) it only syncs when I manually tell it to. I have it set to "always up to date" ... does anyone have any ideas?
Thanks!
Update: just fixed it myself but in case it helps anyone I turned on the Push Notifications & that did the trick. Which is kind of odd bc I notifications from my Gmail & MS Exchange automatically did it but I guess that feature has to be turned on for this email.
Wish all the features on the N9 had the "I" icon which you could press for more info as I thought that option would just let you know when your email was syncing (like the little arrow on the top right). Oh well - now if I can just get my contacts/calendar off of my PC's OutLook & onto my N9 ...................
Cheers!

How To Configure GP For Client DC on Windows Server 2003

Similar Messages

Maybe you are looking for