How to configure HP Designjet T610 network card.

Dear All! i have HP Design jet T610 with network card HP JetdDirect 620N & now i want to configure my plotter on network, i checked plotter setting & go to connectivity panel but there is no option to give it static ip or host name etc. so can some please guide me how i configure my plotter via network?

We have HP Designjet T610, it has already network interface card placing on the plotter, so i don't know that is Jetdirect or not?! How should i know that, also how to configure and include in the network? it saying "Jetdirect -> No" on the connectivity settings. Pls help?

Similar Messages

How to web filtering via two network cards?

I have Installed Server 2008 and two network cards
on my pc. One LAN card for clients access and one for internet router. I need to share internet connection to my client computers with
web filtering. So how to do that? I need to block some sites to client access.

Hi,
According to your description, my understanding is that you want to use the WS 2008 to share Internet connection and provide web filtering function for internal clients.
Internal clients –(NIC1) WS 2008(NIC2) – Internet router – Internet network
Manually assign IP address, default gateway, DNS server, etc. on NIC2. Manually assign IP address, DNS server, etc. on NIC1.
Install Network Policy and Access Services – Routing and Remote Access Services. Detailed steps reference:
Install and Enable the Routing and Remote Access Service
https://technet.microsoft.com/en-us/library/cc770798(v=ws.10).aspx
Then open Routing and Remote Access and start configuration. Enable NAT on NIC2 to transfer IP address. Detailed steps reference:
Enable and Configure NAT
https://technet.microsoft.com/en-us/library/dd469812.aspx
Windows Server itself does not support web-based filter, third-party tools with application-layer firewall might be needed to realize this function. Configure WS as a router, it supports IP packet filtering, which specifies which type of traffic is allowed
into and out of the router. Reference：
https://technet.microsoft.com/en-us/library/cc732746(v=ws.10).aspx
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How do I find out what network 'card' is in my DV6700?

There are umpteen numbers of various DV6700's...the only model number I show on mine is DV6700....yet, the driver info does not list a wired driver..only wireless. I need the 'car' manufacturer and the driver for windows XP. How and where do I get this information? (My hard drive failed and I had to install Windows XP Pro, cold, from a Microsoft CD and it did not have any laptop drivers that were recognized by my laptop.)
Thanks in advance

Really there are only 2 versions, Intel and AMD. If you have AMD the network card is driven by the chipset driver for the nVidia chipset which you can get for Windows XP:
Everything you need is explained here:
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/General-XP-Downgrade-Guide-for-HP-Laptop...
Look in the "difficult models"

TVSU - How to configure pointing to a network repository?

I have installed UR on the server. Created a share called \\svr\systemupdates\
I am trying to understand how to configure the SU on the client machine to "look" to that network repository for updates...
I have tried the following but maybe I am not understanding the terminology used?
The following keys are used to store the user name and password:
HKLM\Software\Lenovo\MND\TVSUAPPLICATION\UNC=<network share> HKLM\Software\Policies\Lenovo\MND\TVSUAPPLICATION\UNC= <network share>
HKLM\Software\Lenovo\MND\TVSUAPPLICATION\Pwd= <encrypted password>
What password is referred to?
When I use the mapdrv utility I have to use the administrator user and password in order to get the drive mapped (SBS 2003)
Some of the registry keys were not present on the client machine and I had to create them (X200 running Vista) SU ver 3.14
Any help or idiots guide to setting this up would be appreciated! Screenshot of correct registry config?
Thx!

I am also interested in how to get it to work!.

How to configure Lion Server as network time server?

I have Lion Server at the top of a small network of Windows 2K, Windows XP and Windows 7 machines.
I need each of those computers to synch their time to that of the Mac Server because this network operates without internet access.
I have tried various protocols from those machines to synch on the server's IP but they all fail.
It has led me to belive I need to enable a service to allow time synch to the managed computers.
But I can't find information on this. I keep getting directed to how to synch the mac to a time server or time machine configuration tips.
Thanks in advance

In Server Admin, select your server, click on Settings, then go to the General tab. You will see an option to enable the Network Time Server.

How to configure and test Profibus network using NI part number 780161-01 Master/Slave interface

I have purchased this board from NI. I have been in touch with Comsoft who it appears is the developer of this board. I have used the configurator II to try and build the network. The GSD file for my slave board is entered. I also can see the GSD file for the master. There appears to be no obvious way to test the bus from the configuration tool. I have tried the Express VI provided by Comsoft. Nothing happens. I have a purchased profibus cable with terminations installed. I know the cable works as another division has another Profibus master that does work using this cable How do I configure correctly for sure? How do I test?
Thanks
Rick
Solved!
Go to Solution.

Hi Rick,
First, ensure that you have the correct drivers installed on your system:
Make sure NI-VISA 4.2 or later is installed on your system.
First install 1.3x.x COMSOFT driver
Second install a DF PROFI II Slave and Master board in your PC-System.
Reboot your computer System.
Install the NI-PROFIBUS driver, instructions can be found here.
However, it sounds to me like you may have an issue with your bus configuration or with the GSD file. First, did you obtain the GSD file from the manufacturer or from profibus.com?
Also, common issues with the configuration include specifying an improper baud rate (supported baud rates can be found here), or an incorrect PROFIBUS address. Were you able to successfully save the bus configuration and generate the configuration database? Were you able to load the configuration database into the master device successfully as well?
If you are unable to resolve this issue, can you provide me with some more information about your system setup and error? What PXI chassis are you using, version of LabVIEW, operating system? What devices are you testing on the bus?
Julianne K
Systems Engineer, Embedded Systems
Certified LabVIEW Architect, Certified LabVIEW Embedded Systems Developer
National Instruments

How to configure the drivers VGA & network wireless for Enterprise Linux 4

Hello
I have installed Enterprise Linux 4 for PC HP Compaq dc7700. The installation was successful but I cannot find linux software driver for VGA & NETWORK.
Where and how can I FIND and INSTALL the drivers VGA & NetWork for liunx Enterprise 4 .
The details of the driver for the display is
VGA=intel Q965/Q963 Express Chipset Family for HP Compaq dc7700 Convertible Minitower PC
and the driver name for the Network is Wireless D-link DWL-G520 PCI Adapter.
Thank you

Hi, Wesam
Please take a look the following link
http://h20331.www2.hp.com/enterprise/cache/317386-0-0-0-121.html
Generally HP compaq dc7700 is not supported with RHEL4.
so maybe you have to install their drivers manually.
For VGA driver, please refer to
http://www.intellinuxgraphics.org/download.html
For Network adapter ,please refer to
http://linux-wless.passys.nl/query_part.php?brandname=D-Link
http://madwifi.org/
Good luck
Jason

How to configure an XVR-2500 video card

Hi,
I have an ultra 45 w/ an XVR-2500 video card and I would like to configure this card so that I can have two screens and be able to drag one terminal window from one monitor to the other. Is this possible?
I have created /etc/dt/config/Xservers with
:0 Local local_uid@console root /usr/openwin/bin/Xsun :0 -nobanner -dev /dev/fbs/kfb0 -dev /dev/fbs/kfb0
Upon rebooting it only displays a command line login on both screens (can not get a GUI login).
Below is my fbconfig -prconf output:
--- Hardware Configuration for /dev/fb ---
Type: Unknown
Memory:
Total: 256.000 MB (268435456 bytes)
Allocated: 256.000 MB (268435456 bytes)
Available: 0.000 MB ( 0 bytes)
PROM Information: @(#) xvr2500-1.fth 19.116 06/04/14 SMI
Monitor/Resolution Information:
Monitor Manufacturer: SUN
Product code: 1423
Serial #: 32462413
Manufacture date: 2005, week 48
Monitor dimensions: 51x32 cm
Monitor preferred resolution: 1920x1200x60
Separate sync supported: no
Composite sync supported: no
EDID: Version 1, Revision 3
Monitor Supported resolutions from EDID: 1920x1200x60,
1920x1080x60, 1280x1024x60, 1600x1200x60,
SUNW_DIG_1920x1200x60, SUNW_DIG_1920x1080x60,
VESA_STD_1280x1024x60, SUNW_STD_1280x1024x76,
SUNW_DIG_1600x1200x60, SUNW_STD_1152x900x66,
VESA_STD_720x400x70, VESA_STD_640x480x60, VESA_STD_640x480x67,
VESA_STD_640x480x72, VESA_STD_640x480x75, VESA_STD_800x600x56,
VESA_STD_800x600x60, VESA_STD_800x600x72, VESA_STD_800x600x75,
VESA_STD_832x624x75, VESA_STD_1024x768x70,
VESA_STD_1280x1024x75, APPLE_1152x870x75, 1280x1024x75,
1152x870x75
Current resolution setting: EDID_1920x1200x59
Framelock Configuration:
Slave Mode: Disabled
THANKS

If you want to connect and use an iPod on more than one computer (For instance you have one at home and maybe a laptop or PC you use at work) you can change the update preference to "manually manage music and videos.
Using iPod with Multiple computers
Managing content manually on iPod

How to configure Intel pci8086,109a Network dapter

hi folks, a sI'm totally new to Solaris 10 so I can use lots of help PLEASE.
After installing Solaris 10 11/06 on Dell 9150, there's NO internet connectivity.
With some help I've added a line [i]pci8086,109a pci8086,109a net pci iprb.bef "Intel 10/100/1000 Network Adapter" [i]to /boot/solaris/devicedb/master and iprb "pci8086,109a" to /etc/driver_aliases and then ::devlinks & touch /reconfigure::
Still there's NO internet connectivity. Many, Many thanx in advance. -Jags

hi folks, a sI'm totally new to Solaris 10 so I can
use lots of help PLEASE.
After installing Solaris 10 11/06 on Dell 9150,
there's NO internet connectivity.
With some help I've added a line [i]pci8086,109a
pci8086,109a net pci iprb.bef "Intel 10/100/1000
Network Adapter" [i]to
/boot/solaris/devicedb/master and iprb"pci8086,109a" to /etc/driver_aliases and then
::devlinks & touch /reconfigure::
Please undo the entry in devicesdb/master. You don't need a .bef file. This was required when one used the older boot method and that too when one needed to network boot the system. With GRUB boot which available on Solaris 10 11/06 network boot is done using PXE protocol.
The problem is that Solaris does not recognize your device. The drivers are probed and attached depending on the entries available in /etc/driver_aliases. The entry the ethernet device is not in that list.
To obtain the correct entry,you would need to look at the output from prtconf -pv. Check for Intel or "Ethernet" in the output and look for the compatible properties. The entry would look something like "pci8086,1029.8086.109a". Note that actual entry should be based of the the entries from the "compatible" properties. The correct method to add an entry is use update_drv -a -i "pci8086,XXXX" Where XXXX is based on the output from prtconf -pv.
>
Still there's NO internet connectivity. Many, Many
thanx in advance. -Jags

How to install a network card on Solaris 10

Hi to all,
I have installed for the first time Solaris 10 on i386 system.
All went fine. Although Solaris did not found the PCI network card, is this normal?
How can I install the (Realtek) network card;
Thank you.
Costas.
Edited by: tritsako on Feb 9, 2009 11:33 AM

Thank you Zettabyte!!
Folks, network printers should NOT BE configured like this:
lpadmin -p somequeue -s someprinter
that creates a remote style queue and puts all the I/O and processing capability on the basic LPD listener present on network printer interfaces. This will cause problems down the road, not to mention that you cannot control access, get any logging, filter content, or control banner pages.
Network printers should use any software (or PPD file) supplied by the vendor over the basic lpadmin/netstandard config.
You can install CUPS, but Oracle won't support it until it's part of the OS (S11, apparently).
The "System Administration Guide: Solaris Printing" is highly recommended for those administering printers on Solaris.

How to config network card to detect router?

Hi everyone,
I am newbie to solaris, I installed solaris on my old PC, and it has the Netgear FA311 card. It is supported by Solaris according to HCL.
however, it doesn't seem like it is auto-detecting the router.. as result, there is not internet connection.
So, may I ask for your help ?
1.) how do I know my existing network card is detected and installed probably in Solaris? is it auto detect?
2.) how do I manually config to detect my router?
Thanks

Are you trying to get an IP using dhcp or static IP.
If your trying to use dhcp then make sure your hostname is in /etc/nodename
and do a "touch /etc/dhcp.<int>" where <int> is the name of the driver for your interface.
If your trying to do static then put the IP of the router in /etc/defaultrouter
And your hostname in /etc/hostname.<int>
And make sure you have an entry for your hostname in /etc/hosts and /etc/inet/ipnodes

Installing Intel Network Card

Hi all,
How do I install an Intel Network card into a solaris 9 x86 platform?
Thank

First of all, I do not see the nic when I run the command prtconf -v | grep pci8086That's possible, because you may have got an oem version of the intel hardware, and the vendor ID from
someone else (let's say Compaq / HP, or Toshiba, or ... -- and not Intel) appears in the device's name.
Have a look at the "prtconf -pv" output, search for devices with a "class-code" of "00020000" (= PCI Ethernet
controller). The vendor-id/device-id pair of that entry should identify it as an intel gigabit nic. At this time,
Solaris 10 x86 (b63) supports lots of variants of the intel gbit hardware:
# grep e1000g /etc/driver_aliases
e1000g "pci8086,1000"
e1000g "pci8086,1001"
e1000g "pci8086,1004"
e1000g "pci8086,1008"
e1000g "pci8086,1009"
e1000g "pci8086,100d"
e1000g "pci8086,100e"
e1000g "pci8086,100f"
e1000g "pci8086,1010"
e1000g "pci8086,1011"
e1000g "pci8086,1012"
e1000g "pci8086,1013"
e1000g "pci8086,1014"
e1000g "pci8086,1015"
e1000g "pci8086,1016"
e1000g "pci8086,1017"
e1000g "pci8086,1018"
e1000g "pci8086,1019"
e1000g "pci8086,101a"
e1000g "pci8086,101d"
e1000g "pci8086,101e"
e1000g "pci8086,1026"
e1000g "pci8086,1027"
e1000g "pci8086,1028"
e1000g "pci8086,1075"
e1000g "pci8086,1076"
e1000g "pci8086,1077"
e1000g "pci8086,1079"
e1000g "pci8086,107a"
e1000g "pci8086,107b"The eeprom checksum failure does not look too good. I'm not sure if this is a problem which prevents the
use of the hardware with the solaris network driver.

How to configure Netgear FA510C Network Card

I installed Solaris 8 (Intel) on my laptop(Compaq Presario
1275) and have NetGear FA510C network card to be
configured. When I installed Solaris, it didn't recognize
the network card, and I have no idea how to configure
this network card. Does any have any idea how to
install and configure this network card?
I'll appreciate your help.
cwpak

Try to use devfsadm -v to find the device
Then use ifconfig dnet0 (not positive this is the right syntax for SMC) to plumb the device.
Then use ifconfig dnet0 192.168.50.4 up
You may have to modify these files to get the IP to come up on startup and properly resolve:
/etc/hostname.dnet0
/etc/netmasks
/etc/resolv.conf
/etc/defaultrouter
/etc/nodename

How to configure SMC 9432TX - Network Card

Hi,
My Solaris8 (Intel) works fine but I just got a NIC card. Can anyone tell me the steps to Install and configure a Network Card.
I have SMC 9432TX .
Thanks

Try to use devfsadm -v to find the device
Then use ifconfig dnet0 (not positive this is the right syntax for SMC) to plumb the device.
Then use ifconfig dnet0 192.168.50.4 up
You may have to modify these files to get the IP to come up on startup and properly resolve:
/etc/hostname.dnet0
/etc/netmasks
/etc/resolv.conf
/etc/defaultrouter
/etc/nodename

How to use two different network cards on RT?

Hi everyone... I'm currently working on a project where I have to deal with the issue mentioned in the thread's topic: I have a PC with RT LabVIEW that has to be able to establish network connections using two different network cards. One will be used to connect via TCP/IP with a host computer that will show the data transmitted through shared variables; the other will communicate with another PC through Modbus protocol. The key is that each communication is done through a separate network card.
So far I haven't been able to figure out how to configure both things to happen. Does anyone know how to do this? Any tips will help.
For the RT communication I'm using a standard RT project, with the RT PC being given one of the IPs, and for the Modbus part, I created an I/O server with a master and a slave. Separately everything works fine, but when I get them together it simply won't work.
Thanks for your help!
Solved!
Go to Solution.

Sorry it took me so long to answer, I've been busy lately....I've found a solution to the problem I mentioned, and just in case anyone has similar problems in the future, I'll shortly describe what happened.
As Caseyw suggested, it was necessary to enable both network cards through the Measurement and Automation Explorer. The cause of the connections malfunction was actually that I wasn't using the "right" protocol for the Modbus communication, which ran on the secondary adapter. The solution was to use the URL protocol with the correct path on the field, addressing the right IP address. To avoid making this post a mixture of topics, I won't elaborate futher, but I got the gist of it, so if anyone is having similar problems whether it is working with several network cards or with Modbus communication protocols, feel free to contact me, I'll be glad to help.
Thanks

How to configure HP Designjet T610 network card.

Similar Messages

Maybe you are looking for