How to configure Https in Project server 2010.
HI,
Can i any one help me,
How to configure Https in Project server 2010.
My server farm is 1.Test1(App & Wfe) 2. Test2(App & Wfe)
Both are load balanced wit NLB as abc.hyd.in
DO i need to Install certificate in two servers Test1 & Test2 or one server is enough ?
Can any one please provide me a link to configure Https for project server 2010 for Two Farms Servers.
Thank You, Kumar KSV
There is no special configuration for Project Server to have the IIS enabled, it follows the typical sharepoint SSL enablement, we might need some mor edetails on how your NLB is done is it hardware based, software based ? it all depends how you want
to architecht the system, you can enable the Https either on NLB or WFE, again depending upon how you want to enable it, you will need to install the certificates on both WFE or on NLB
Follow the blog below to configure the SSL:
http://epmxperts.wordpress.com/2011/03/05/extend-same-project-web-app-instance-for-different-protocol-authentication-mechanism/
http://blogs.msdn.com/b/sowmyancs/archive/2010/02/12/how-to-enable-ssl-on-a-sharepoint-web-application.aspx
http://www.sharepointconfig.com/2010/03/configuring-a-sharepoint-website-to-allow-ssl-connections/
Thanks | epmXperts | http://epmxperts.wordpress.com
Similar Messages
-
How to : Configure Project Server 2010 to work with Exchange Server 2013
Hi everybody. I have a problem. I did integration success project server 2010 with exchange server 2010. But now my customer use exchange server 2013. So my question is "Have a way to integration project server 2010 with exchange server 2013 ?"
I haven't seen any document with Project 2010 and Exchange 2013. You could still try the old document with Project 2010 and Exchange 2010.
http://technet.microsoft.com/en-us/library/ff468700(v=office.14).aspx
It might just work.
Thanks Gaurav Wason MCITP, PMP -
How to enable Portfolio Analysis Feature for Project Server 2010?
Hi,
We have a Project Server 2010 instance. We now want to Use the Portfolio Analysis on our server. How can we enable the feature on our existing environment without disturbing any current feature that we have ?
If someone can provide with the detailed steps for the configuration process that will be helpful.
ThanksHi ,
The portfolio feature is part of the out of the boxProject Server 2010 solution. Maybe you just have to unhide the links in the quick launch menu. It will not disturb any of your current configuration.
Please find here a couple of links:
https://login.live.com/login.srf?wa=wsignin1.0&rpsnv=12&checkda=1&ct=1397216770&rver=6.0.5276.0&wp=MCLBI&wlcxt=technet%24technet%24technet&wreply=http%3a%2f%2ftechnet.microsoft.com%2fen-us%2flibrary%2fgg715564%2528v%3doffice.14%2529.aspx&lc=1033&id=254354&mkt=en-US
http://azlav.umtblog.com/2012/04/10/resource-plans-and-portfolio-analysis/
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS -
How to get the usage of SSRS reports in project server 2010
Hi
Can any body tell me how to get the usage of the SSRS reports in Project Server 2010.
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.Hello,
See the links below on how to get the usage for SSRS reports:
http://sqlbadboy.wordpress.com/2013/09/12/reporting-services-reports-whos-using-them/
http://www.mssqltips.com/sqlservertip/1908/analyze-report-execution-and-usage-statistics-in-sql-server-reporting-services/
http://www.mssqltips.com/sqlservertip/1306/how-to-know-what-reporting-services-reports-are-being-used/
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS -
How to change the look and feel for Heading of quick launch menu in project server 2010
Hi
can someone tell me how to change the look and feel of Header names in quick launch.
I want the header to be displayed in Bold with Underline to it.
could this be possible for just header in quick launch in project server 2010.Hi Rohan
It does not work this way. You have to use a content editor webpart.
See references below that might help you starting with this customisation:
Http://go4answers.webhost4life.com/Example/sharepoint-2010-quick-launch-look-feel-78379.aspx
Http://m.sharepointpromag.com/sharepoint/four-ways-add-or-remove-quick-launch-menu-control
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS -
Hi All,
I am using project server 2010.
Can some one advise me how can I add Own Workspace filter option in workspace web part like project server 2007 which is showing all projects name page by page. There no filter option available. I am not sure if there is any out of box feature.
Thanks in Advance..Nitin,
PS2010 shows by default the workspaces you have permissions to. Unfortunately, there is no more filtering options available.
The only solutions are to write a custom webpart, or develop your own SSRS Report, which you can customize the way you want.
Refer to Paul's excellent blog post on this topic here:
http://pwmather.wordpress.com/2011/08/05/custom-projectserver-project-site-workspace-view-in-pwa-ps2010-ps2007-epm-msproject-ssrs/
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn: -
How to set a default date for a custom field of Date type in project server 2010.
hi,
can somebody help me.
How Can i set the default date for a custom field of date type in project server 2010 ?Dear Rohan,
You can set default value to custom field thru Lookup table. Assign lookup table to custom field and set default value to some lookup value (Note: check the “Choose a value to use as a default when adding new item” checkbox).
Regards,
Avinash kumar | Blog:http://avigr8.wordpress.com | If you found this post helpful, please “Vote as Helpful”. If it answered your question, please “Mark as Answer”. -
Project Server 2010 how many CAL licenses do I need?
Hey Guys,
We have Project Server 2010 running for two years now.
We are preparing for the true-up yearly exercise with Microsoft to count the nbr of CAL licenses we need.
As Project Server admin I have been asked to provide an access log of the users accesing Project Server.
Is there a way to know how many users are accessing Project Server so we know how many CAL we need?
I alreayd read the project server 2010 licensing guide (http://download.microsoft.com/download/F/8/8/F88B3241-3E27-4BDD-8A01-ABF2422FB31C/Project%202010%20Licensing%20-%20Licensing%20Guide.pdf)
but it does not help me in this case.
Thanks in advanceI found my answer here :
http://social.technet.microsoft.com/Forums/en-US/0507ab7f-82d3-435d-8f90-74f2edfa3aa7/how-to-count-number-of-users-in-project-server-2010
"Well, you could just go to Server Settings >> Manage Users >> Actions and Export to Excel.
From there you can filter out the Active vs. Inactive Resources, and get your counts" -
How to set Logo Image for each Project Site Seperately in project server 2010.
Hi,
I want different logo images to be set for each Project Site of different project Separately in Project server 2010.
Scenario is, we have different Project of different client , each client want different logo for their respective Projects.
How to accomplish this task?
Please Help me.
ThanksHello. Store the logo somewhere accessible, either in a library at the PWA site collection or on the project site, make a note of the URL to the site then navigate to the project site and depending on what logo you want to update you can click Site Actions
> Site Settings > title and description then update the image URL there. Alternatively, on the homepage of the project site add an image web part then reference the new logo using the URL. Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS -
How to add total of actual in My work- Task in project server 2010.
Hello all,
I need to add total of actual in My work->Task in project server 2010.
How can I achieve it?
Your help is appreciated.Hi Rohit,
Unfortunately, there is no configuration which allows having the actual total work in "my tasks" page. Note that you have the total for the period for each assignment in the column next to the "work" column. In case it doesn't suit
your need, I'd suggest to propose for example a simple report, otherwise a development could be quite complex and time consuming.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller | -
How to sync Projects between Sharepoint and Project server 2010.
Hello,
My project is saved in SharePoint and I am trying to save and link my project from Sharepoint to Project server 2010 so that they will be saved in Sharepoint and Project Serverwill both and synced.Users can edit or update from Sharepoint
and Project server.
Any help or suggestions would be greatly appreciated!
Thanks,
Prashant
Thanks, PrashantHi Prashant,
It is a bit unclear how you have a project in Sharepoint AND a project in Project Server 2010.
The basic process is :
you have EPT, associated with a Sharepoint template
You create from Project Server 2010 (project center) a project choosing an EPT
a project plan (mpp) will be created, editable from PWA or MS Project Pro2010
a Sharepoint site associated with the project plan will be created, based on the EPT WSS template
In server settings, you can sync permissions between the project plan and the sharepoint site, and also check for the url and eventually update them.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS -
How to disable the edit Permission after the task approval in project server 2010.
Hi ,
Can this be done.
How to disable the edit Permission after the task approval in project server 2010.
I mean How to Disable approve/Reject Permission Once task approved in project server 2010.
Any Help Would be more than Welcome.Hi Rohan,
Just talking about the tool capabilities, preventing a task approver (status manager) to approve/reject updates once he has already approved once is not possible out-of-the-box. You grant permissions to user: if you grant a user to approve task updates then
he has the permission to approve updates, no matter if it is the 2nd or 3rd time the task is approved or rejected.
Then of course you could do not custom development to do that.
I'd say that in order to help you, we would need to understand a little bit more your business need. Why do you need to achieve such a goal? We can surely propose you workaround.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS -
How to configure http server in oracle 10g
Hi
I am configuring apex 3.2.1 on oracle 10g 10.2.0 I need help how to configure http server bec i did not find any Apache file or folder in 10g if it is then how .
ArshadHi
I use to configure only this in $ORACLE_HOME/forms/server/forms.conf (and restart ias):
AddType application/x-orarrp rrp_
AddType application/x-orarrp-text rrpt
AddType application/x-orarrp-ps rrpp
AddType application/x-orarrp-pdf rrpa
AddType application/x-orarrp-rtf rrpr
AddType application/x-orarrp-html rrph -
How to define a unique project level custom field in project server 2010?
Hi every one;
is it possible to define a unique project level custom field?
our client wants to have a unique custom field( project code) which doesn't allow users to save and publish projects with the same value.
for example if user A define a project and set "project code = 1" if user B define another project and wants to save "project code =1" for it, the server doesn't allow him to save this value and he has to change value for example to 2
thanks for any helpFirst of all you need to have Project server development environment also for coding visual studio hands on is required.
To start with PSI (Project Server interface)you need to have Development Environment of Project Server 2010.
you can get the overview from http://msdn.microsoft.com/en-us/library/office/ms457477(v=office.14).asp
You
can get the information about SDK: Download SDK.
http://msdn.microsoft.com/en-us/library/office/ms512767(v=office.14).aspx
Below mentioned link is having code and reuqired information about :
Generate Unique ID for Project using a webpart
http://epmxperts.wordpress.com/2012/05/21/generate-unique-id-for-project-using-a-webpart/ -
How to query Process Status from database in Project Server 2010
Hello All,
I am using Project Server 2010.
I need to query Process Status from SQL.
where can I find Process Status in Database.
Thanks,
RohitHi Rohit,
you will not be able to find this information in reporting DB - the only database queries are supported.
If you really want to go for an unsupported solution, you should be able to find related tables and how to join them in stored proc "MSP_WEB_SP_QRY_Statusing_ReadStatus" in published database.
Regards
Barbara
To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
an appropriate solution faster. Thanks for your support!
Maybe you are looking for
-
Is Not Working Properly (.*?) in indesign javascript
In IndesignCS3 Javascript couldn't get immediate occurance for example <month>.*?</month> It fetches months content from bolded opening month to closing month. What is the meaning of "?" input of the document: <ref id="r34"> <label>34</label> <nlm-ci
-
Quicktime Pro 7 on Snow Leopard displays black with uncompressed Quicktime
Hi, I have searched these discussions but with no luck so far. Any help will be greatly appreciated but I have the feeling there may be no solution to my problem. Perhaps the new 64 Bit Quicktime 7 is missing the codecs I need. For more than five yea
-
Is the Epson Artisan 1430 compatible with Maverick?
I am thinking of purchasing an Epson Aratisian 1430 to use with my iMac. Is it compatible with the new download OS X Mavericks?
-
CRM component controller problem
hi guys, Can anybody tell me why i'm having this error, Clase excepción: CX_BSP_WD_INCORRECT_IMPLEMENT - Controlador de vista o custom se ha implementado con error Método: CL_BSP_WD_CONTROLLER=>DO_CONTEXT_NODE_BINDING Línea texto fuente: 51 I think i
-
Can not set old apple id in my iphone & icloud not working
Hello Dears.... I am mostafa my apple id was [email protected] then i changed it to new mail address [email protected] for sample but verifying mail not recieved in my mailbox and then i delete my apple id in my iphone & icloud now my all contacts d