How to configure hw disk array for ORACLE VM SERVER 2.1.1?

ORACLE VM SERVER 2.1.1 ON DISK SATA ARRAY R0. AFTER A INSTALLATION ORACLE VM SERVER DON;T LOAD

No reason to shout, buddy... Turn CAPS LOCK off, please.
Some more information might come in handy also. Like what kind of hardware you're using.
Otherwise it's going to be a shot in the dark.
In the meantime: try some GRUB-parameters to boot from the right device. That's all I can think of right now.

Similar Messages

  • How to configure Workflow Notification Mailer for oracle alert in R12

    Hi all....,
    How to configure Workflow Notfication mailer for oracle Alert in R12. Please provide the complete steps.. Its urgent.. Plz help me..
    Regards ,
    Madhan

    Duplicate thread (please post only once)
    plz help me...!!!! Workflow Notification Mailer
    plz help me...!!!! Workflow Notification Mailer

  • How to get account expiry date for Oracle Directory Server?

    I need to get the account expiry date for Oracle Directory server. Which attribute stores this value? Please let me also know the attribute type and how to fetch it.
    Thanks,
    Subrat

    Hello,
    Yes you can use nsAccountLock directly (When nsAccountLock=true, the object is inactivated and the user cannot log in)
    This is documented in Modifying Directory Server’s NsAccountLockAttribute Directly (Sun Java System Directory Server Enterprise Edition 6.2 In…  (release number is old but it does not matter, Thats the first one Ive found)
    You can also use dsutil account-inactivate as described in dsutil - 11g Release 1 (11.1.1.7.0)
    Sylvain
    Please mark this response as correct or helpful when appropriate to make it easier for others to find it

  • How to set -Xss or ulimit  for Oracle Http Server

    Hi,
    We are facing Out of Memory Error in OHS 11g in our cluster environment. Where I can see below statements in http log file:
    # There is insufficient memory for the Java Runtime Environment to continue.
    # Cannot create GC thread. Out of system resources.
    # Possible reasons:
    # The system is out of physical RAM or swap space
    # In 32 bit mode, the process size limit was hit
    # Possible solutions:
    # Reduce memory load on the system
    # Increase physical memory or swap space
    # Check if swap backing store is full
    # Use 64 bit Java on a 64 bit OS
    # Decrease Java heap size (-Xmx/-Xms)
    # Decrease number of Java threads
    # Decrease Java thread stack sizes (-Xss)
    # Set larger code cache with -XX:ReservedCodeCacheSize=
    # This output file may be truncated or incomplete.
    #  Out of Memory Error (gcTaskThread.cpp:46), pid=17956, tid=140591807985408
    When I run the ulimit command on machine, stack size is showing as 10MB:
    Result:
    [oracle@XXXXXX bin]$ ulimit -a
    core file size          (blocks, -c) unlimited
    data seg size (kbytes, -d) unlimited
    scheduling priority (-e) 0
    file size (blocks, -f) unlimited
    pending signals (-i) 1031958
    max locked memory       (kbytes, -l) 3500000
    max memory size         (kbytes, -m) unlimited
    open files (-n) 131072
    pipe size            (512 bytes, -p) 8
    POSIX message queues     (bytes, -q) 819200
    real-time priority (-r) 0
    stack size (kbytes, -s) 10240
    cpu time (seconds, -t) unlimited
    max user processes (-u) 131072
    virtual memory          (kbytes, -v) unlimited
    file locks (-x) unlimited
    Setting the stack size to 512KB or 256KB might resolve the problem.
    I tried setting ulimit -s 512  in my user bash_profile. and ran ulimit -a , then it is showing as 
    stack size (kbytes, -s) 512
    If I set at user level, does it have any impact? Or we should set at JVM level using -Xss
    Can some body tell me where can I set -Xss for Oracle HTTP server 11g?
    Regards,
    Vidya

    Hi Marco,
    I believe you'll need to setup a MX record under 'More Actions' for your domain in Site Settings / Site Domains.
    Select the option "Use another external service for email" and enter your primary mail server's hostname at priority 10.
    Think you can repeat this step for your secondary mail server (priority 20) if you have one.
    Regards
    Mike

  • How to configure Solaris 10 IPMP for Oracle VDI 3.3.2

    Hi,
    Does anyone have an indication on how to configure Solaris 10 IPMP in a manner that supports Oracle VDI?
    We have setup two servers with 2 test addresses on physical and 1 logical for the hostname of the box, but when we configure VDI the VDI database does not come up on the 2nd box. We have also tried configuring IPMP without test addresses, but it doesn't make any difference - the DB still doesn't go into the up state after configuration on the 2nd server.
    Solaris 10 u9 with patches
    Two physical NICs on management VLAN via 2 switches
    Two physical NIcs on VDI VLAN via 2 switches
    VDI 3.3.2
    All hostnames are in DNS and resolve for short name, FQDN and also reverse IP lookup
    The is a proposal pdf on Oracle website that mentions IPMP, so someone has done it. Just could do with a hint on how it was done so that it works.
    ( http://www.oracle.com/us/technologies/virtualization/vdi-design-proposal-1401195.pdf )
    Thanks
    Paul

    OK, updating this with what was causing the issue.
    Not an IPMP problem this was a DNS problem. The VDI servers have access to two DNS environments, so had a DNS search path that had the domain where the VMs where going to go and another for management of the box with two DNS servers listed in /etc/resolv.conf.
    We configured VDI using the FQDN for the management DNS, however the vda-config script takes the hostname of the box adds the first DNS domain from /etc/resolv.conf search entry and configures using (it seams to ignore what you put into the vda-config). When the config script comes to configuring MySQL because the names didn't match (FQDN it created by adding hostname to the 1st entry in DNS search path & FQDN that you put into vda-config command), it decides that it is configuring a "Client MySQL" instance rather than a "Slave MySQL" instance, which means the VDA DB never comes up in the out of vda-center status.
    So the fix is to:
    1) configure IPMP without test addresses (so traffic comes out of the correct IP and can be reverse looked up in DNS by the other host)
    2) if you have multiple DNS search entries, configure VDI using the first entry in your search path as its FQDN
    Paul

  • How to configure Symantec Mail Security for SMTP & Messaging Server 6.3

    Hi!
    I want to install a Symantec Mail Security for SMTP 5.0.1(host1) with Messaging Server 6.3 (in production - host2), but when I try to access to POP protocol to send a message from Internet, the system display a message with a relay problem.
    - Could you help me with this issue?,
    - Do you know some documentation that speaks of this?. I can't find any documentation that explain how to configure and integrate SMS and Messaging Server. Thanks in advance.
    Regards, CR

    ctemp1 wrote:
    I want to install a Symantec Mail Security for SMTP 5.0.1(host1) with Messaging Server 6.3 (in production - host2), but when I try to access to POP protocol to send a message from Internet, the system display a message with a relay problem.I take it that you have configured the symantec software like this?
    internet -> symantec mail security system -> sun messaging server -> recipientA better approach is the following
    internet -> sun messaging server -> recipient
                              |
                             V
                  symantec mail security system(refer here: http://blogs.sun.com/factotum/entry/messaging_server_correctly_deploying_the)
    - Do you know some documentation that speaks of this?. I can't find any documentation that explain how to configure and integrate SMS and Messaging Server. Thanks in advance.There is no documentation specifically for symantec software but we do document how to send emails via the symantec mail security server using the aliasdetourhost channel keyword:
    http://docs.sun.com/app/docs/doc/819-4428/6n6j42615?a=view#bgaqy
    Regards,
    Shane.

  • Disk Options for Oracle VM server

    We are looking to purchase some new server hardware to run OVM 3.x Servers on. We know from the installation the disk space required on these boxes is only 4G.
    We have been looking at Oracle Servers mainly to be fully supported running OVM Server 3.0.x. The base server disk options would be 2 300G 10,000 RPM drives with a HBA controller to run those disks. RAID 01 them to be protected from one drive crashing. Total Price tag with the controller is about $4000.
    Another option we were looking at is to run some flash card (it appears even Oracle sells a 4G option) but we are not sure how these cards might install into the server. We found some larger 50G PCI type cards from another vendor which might make us feel better than having a production system run on a USB stick ;)
    We can not find any pictures of these Oracle Flash cards, so we don't quite yet understand how they would plug in and are just assuming its USB.
    The part # is RA-S-4G2-USB2
    I wanted to know other people's opinion on the topic. What are others doing for disks inside of the Oracle VM storage which is just used to hold the JeOS. It seems any spinning hard drive RAIDED is a complete waste with the sizes of the disks now.
    Avi, you might know what is actually supported by Oracle VM?
    Thanks for any insights.

    Avi Miller wrote:
    >
    Just buy $10 4GB USB sticks, in my opinion. You can buy 20 of them and still save lots and lots of money. Redundancy right there. :)Would you run a mission critical Production database on a cheap $10 USB stick?
    If the USB stick goes down for whatever reason and you have a spare on the shelf, the OVM server still goes down, and therefore any Guests (including our Production database) would go down. I know High Availability should move the VMs running to another machine. But that will only work if I have enough memory capacity for this guest. The main guest I am concerned about is 128G of RAM. I will probably not have space to move it without making a change.
    We are shooting for 100% uptime and therefore a simple USB stick creates a lot of hesitation. Any more Enterprise level solutions besides the disks?

  • Shared Disk Subsystem for Oracle 10g RAC

    I am investigating the feasibility of clustering two 220Rs together in an Oracle 10g RAC configuration. Can I use a D1000 disk array for the shared storage between the two nodes? Can you briefly describe how to do it or point me to documentation on how to do it?

    hi dstmark,
    can you kindly share some information with me? i am thinking of building up a small lab at home using A1000 to build up an Oracle RAC, as a1000 have 2 scsi port and have a build in controller.
    but i am unsure about the detail software requirement, as google return some conflict information.
    is SUN cluster would be enough? do i need to get something like Veritas Cluster? which may require a license key....
    thanks for sharing information.

  • How to configure local disk on OVM Server as storage space to create VMs

    Hello,
    We have installed OVM Server 3.1.1 on a machine that has 250 GB of Hard disk space [Single disk].
    While installing used an option - Remove all partitions and create a new default partition layout.
    Around 4GB has been used and remaining 246 GB is left as free space.
    From OVM Manager - the server is discovered but didn't discovered the physical disk [i.e. remaining 246 GB raw disk space].
    Can someone help me to understand how to use local disk as storage space for creating and running VM's.
    Thanks
    Srinivas

    You can? You've used every conceivable BIOS out there? You must really be full of yourself. There is absolutely no BIOS that I know of that gives this basic function. BIOSs do not "hard partition" anything. A "BIOS" is not made for such things. Do you even know what "BIOS" stands for?
    I wonder why there is some many wanting to do this and are having problems.... I mean if it is such a straight forward thing to do..... It must be down right "intuitive".
    You maybe speaking of a RAID "BIOS" but you obviously think you're not. Some motherboards have integrated RAID abilities. Intel RST comes to mind... BUT this isn't a feature of a MOTHERBOARD BIOS.
    I've got some $50,000 servers that will not break a single hard drive up into multiple logical drives..... Now, I haven't worked on a "Stinkpad" for many years. Don't want to. However, I have never seen one that would do what you're saying you're doing.
    You maybe trying to help.... but you're leading people down a wrong path.
    Its just as easy to run virtual box and use the virtual box templates for Oracle VM. In fact, its more practical if you want to run Oracle VM on a laptop for testing purposes than blowing everything away and attempting to setup different LUNS on a single hard drive.
    For your review...
    http://www.oracle.com/technetwork/articles/servers-storage-admin/configure-vm-templates-1656261.html
    Although it's more reliable to use a separate location (such as an NFS share) for a storage repository, you can use a local disk of your Oracle VM Server instead, thus taking advantage of the local storage option. Beware, though: Oracle VM Server 3.0 doesn't allow you to utilize the unused space on the physical disk it's installed on. For local storage, you'll need at least one more physical disk. In other words, you'll need a total of two disks at minimum on your Oracle VM Server host if you want to use local storage. In practice, though, local storage is not a primary use case. The major downside to this approach is that local storage, by definition, cannot be shared between different servers.
    Edited by: user12273962 on Dec 10, 2012 10:40 AM

  • I want to set up the Time Machine and I would love to use the Time  Capsule but since I already have a wireless router I need suggestions on  what other external disks Apple could recommend to use with the Time Machine and  how to configure that disk

    I want to set up the Time Machine and I would love to use the Time
    Capsule but since I already have a wireless router I need suggestions on
    what other
    external disks Apple could recommend to use with the Time Machine and
    how to configure that disk.
    A complication that I need to resolve is the fact that I am using Vmware
    Fusion to be able to use Windows on my Mac. Now it seems that Time
    Machine is not backing up my files
    on that virtual Windows without additional configuration and my question
    is whether you can advise me here or whether this is only a matter for
    the Fusion virtual machine.

    If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
    You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas  series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
    Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
    TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
    You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it.

  • How do I access Disk Utility for 10.7.1?

    How do I access Disk Utility for 10.7.1? I found it in the forums a few weeks ago, used it, then lost the directions. This is a last ditch attempt
    to use OS Lion. I parted my hair incorrectly when I installed and have been plagued by the dread rainbow spinning ball in EVERY application. Yes, every. Name one, Safari, Firefox, Text Edit, Mail, Excel, Word, iTunes, Garage Band, Calculator, Calender, iPhoto....yes, every, and I cannot
    find a solution that works. I have back up files on two different hard drives 500 gig and 1 terrabyte with all my music, photo and writing files.
    I am a writer and a musician so imagine the frustration. OS 10.6 is an option of course. My dedication to Apple and each new OS is deep so
    I am hoping that somehow there will a fix, an upgrade, something that does not require me to go bac to the much more endangered species named OS.
    hahhaa! Just stalled waiting for the ball to finish with it's random spinning.... SO, this is like a last desperate .... it just did two more stalls.
    NO OTHER apps running, just little Firefox holding on for dear life, last desperate request for a fix.
    MacKeeper has been great in sending helpful directions for getting the Antivirus to work after it mysteriously decided to stop working, Quite MacKeeper,  go to Activity Monitor, force quit helper, start up MacKeeper and run program. It works!
    SO before my third stall stops me, please post directions to open disk utility in administration mode so that I can do any further repairs that have not worked by using it from the open system. Also keychain synching stopped working with Lion.
    Thanks to any and all who can help.

    Press and hold Command-R keys and reboot. You'll then start up in the Lion Recovery HD. You'll find Disk Utility there.
    Command-R to the rescue.
    Just hold down Command-R during startup and Lion Recovery springs into action. It lets you choose from common utilities: You can run Disk Utility to check or repair your hard drive, erase your hard drive and reinstall a fresh copy of Lion, or restore your Mac from a Time Machine backup. You can even use Safari to get help from Apple Support online. And if Lion Recovery encounters problems, it will automatically connect to Apple over the Internet.

  • How to configure Automatic Account Clearing for A/R

    Hi,
    Kindly advice me how to configure  Automatic Account Clearing for A/R
    The client requirement is
    In A/R the customer accounts are not automatically clearing when a payment is posted for that account. We are still seeing all open items and all paid or cleared items when we go to FBL5N and select open items for viewing. Please make account clearing automatic for customer payments.
    Thanks in advance
    Sunitha

    Hi,
    Use T code OB74.
    Maintain for your Chart Of Account, acct type "D", From and to customer accounts and then add the critera you want. Pls note you cannot define more than 5 criteria.
    Then schedule the clearing program job F.13 in the background.
    Cheers.

  • How to install and where to get kernal source for Oracle VM Server

    Hi guys
    Can someone point me in the right direction for oracle VM Server kernal source, as the server I am using won't ping, and found its cause it doesnt recognise the network adapter, says there is no drivers.
    But the HP website states I have to have the kernal source install so that I can build the driver.
    Any suggestions or help on the matter?
    Thanks

    Thanks
    I got my server to ping.
    Now I have ran into more trouble.
    I have been following ORacles installation guide for installing a Virtual Machine, but am struggling to install it, as their instructions don't match whats on the screen.
    They tell you to copy each CD into a directory.....
    and then mount that directory as an NFS mount.
    I done all that
    and then it tells u to do virt-install
    So I do that, and it all works great, until the end part, its mean to ask you what is your installation souce directory , and your supposed to put nfs:selfhostname_ip_address:/path/to/files
    and away you go.
    However my server says " what would you like to use as your virtual CD image"
    and so I type nfs:server_ip_address:/path/to/files etc, and I get the error CD MUST EXIST
    so to get around this, I just typed /OVS/iso_pool/Disc1.img
    and away we go, instlalation starts....
    However THe instlalation then asks for disc 2, and then I get stuck, how do I tell it, that I changed the disc, and its ready?
    I tried an installation of mounting the disc1 iso from a cd to /mnt
    and then wen it wanted disc 2 I dont umount -l /mnt ...it said inodes busy, so I just forced the eject CD physically ont he drive
    and then mount /dev/cdrom /mnt , for disc3
    but it didn't detect I changed a cd.
    Can anyone help me, its really urgent have to get this server up and running by today if possible.

  • Where to download and how to install X Window System for Oracle Linux 5 ?

    Folks,
    Hello. I am using Oracle Linux 5 and Oracle Database 11g for PIA.
    Before install Oracle DB 11g into Oracle Linux 5, we need to install X Window System according to the document page 2 http://download.oracle.com/docs/cd/B28359_01/install.111/b32285.pdf
    But I don't know where to download and how to install X Window System for Oracle Linux 5.
    Can any folk provide a link to download X Window System and tutorial to install it for Oracle Linux 5 ?

    You can address the problem in a number of different ways.
    You can install X-windows from the installation DVD or setup access to the Oracle public software repository as described in http://public-yum.oracle.com. In which case, the command to install X-windows is: yum groupinstall "X Window System"
    Or, you login remotely and and use SSH with X-forwarding, in which case the software on the server will use the X-Windows server on your client system. This is probably the preferred way since you do not have X-windows installed on the server. For more details about SSH forwarding and howto, please see Install Oracle 11gR2 on Ubuntu Linux 11.04 (64-bit) Howto part 2 Oracle Universal Installer.

  • Configuration of Netscape Navigator for Oracle Forms on Netscape 8.12 Ver.

    Dear Forum,
    I have the experience of confiugring the Internet Explorer for Oracle Forms Web-deployment. But I just want to know what are all the changes are required to configure the Netscape Navigator for Oracle Forms Web Deployment. I came to know that it needs some changes in .dlls. Please advice me any techincal refereneces in this regard.

    Aashil,
    I've a similar configuration: Sun Sparc Solaris 8, Forms 6i Patch 10 and Apache server which comes with Oracle 9i server.
    Forms 6i is on his own Oracle home. I have Forms Listener Servlet working.
    Take a look in ../Apache/Jserv/etc/jserv.conf Make sure ApJServMount /servlets /root and ApJServMount /servlet /root
    are defined. If you want I could mail you my conf-files. My email-address is [email protected]
    kind regards,
    Ivan
    Configuration of Listener Servlet with patch 8 on Sun SPARC Solaris
    I am trying to install and configure Forms6i Application Server for Sun SPARC Solaris 8 with Patch8.
    I am installing application server in /home/oracle/home9iAS, and have set up the development environment in /home/oracle/forms6i.
    1) First i install Forms Server and Reports Server, for that i need to define following env variables
    $ORACLE_HOME is /home/oracle/forms6i
    $ORACLE_BASE is /home/oracle
    i am defining them in .profile file in oracle account.
    2) Apply Patch 8
    3) Install Application Server with Minimal Installation
    4) Configure Forms Listener Servlet using http://otn.oracle.com/products/forms/pdf/p8listenerservlet.pdf pdf file, i am following it to the letter.
    When i try to access forms listener server using http://hostname:port/servlet/oracle.forms.servlet.ListenerServlet i get an error:
    "Not Found
    the requested URL /servlet/oracle.form.servlet.ListenerServlet was not found on this server."
    What can be the reason?

Maybe you are looking for