How to configure iMac and Airport Extreme for remote access?

I want to view videos stored in iTunes on my iMac remotely over the Internet when I away from my home network. My home network setup includes AirPort Extreme with Comcast High Speed Internet Service (16Mbs/6Mbps). I use AirPlayit to support the iMac as a server and have the iPad 3 and iPhone 4 apps for AirPlayit. I have no problem viewing my videos over my home network on any of my mobile devices but for some reason I am unable to configure my firewall so that I can access my iMac remotely when I am away.

Turning off the wireless on the TP-Link router does not make it a simple modem.
You need to configure the AirPort Extreme in Bridge Mode to operate correctly with another router on the network.
Open AirPort Utility and click on the AirPort Extreme icon, then click Edit
Click the Network tab a the top of the window
Make sure that the setting for Router Mode is "Off (Bridge Mode)"
Click Update to save the new settings
Wait 30 seconds for a green light on the AirPort Extreme, then power off the complete network....all devices....in any order you want.
Wait a minute, then start the TP-Link modem/router first and let it run a full minute
Start the AirPort Extreme next the same way
Keep starting devices one at at a time the same way until the entire network is back up.

Similar Messages

How to configure modem and airport extreme?

I have a TP-Link modem/wireless router from the provider.
My Airport Extreme is connected to the modem.
The wireless router in the modem has been switched off.
There is a 'double NAT' warning from the AE.
How to configure the TP-L modem and the AE router to get the best results?
Many thanks if some one could help me there.
Gr. Lance

Turning off the wireless on the TP-Link router does not make it a simple modem.
You need to configure the AirPort Extreme in Bridge Mode to operate correctly with another router on the network.
Open AirPort Utility and click on the AirPort Extreme icon, then click Edit
Click the Network tab a the top of the window
Make sure that the setting for Router Mode is "Off (Bridge Mode)"
Click Update to save the new settings
Wait 30 seconds for a green light on the AirPort Extreme, then power off the complete network....all devices....in any order you want.
Wait a minute, then start the TP-Link modem/router first and let it run a full minute
Start the AirPort Extreme next the same way
Keep starting devices one at at a time the same way until the entire network is back up.

Configure TC and Airport Extreme Base Stations with different channels

I had to do some serious workarounds to use the Airport Extreme Base Stations as an access point with the same wireless network name primarily due to channel overlap. I thought I would post my results here since I didnt' find a good article online.
Also, I found the Snow Leopard verison (5.4.2) of the Airport Setup Utility far superior to Lion's Airport Utility (6.x) in terms of advanced setup.
Setup is a 3 flloor house where the 3 wired network locations have wireless overlap. The problem was that the access points would not hand off the wireless signal because the channels for each airport/TC were automatically set to the same channel. In non-apple setups, this is how you force a wireless client to switch access points (since the wireless software on your client/mac/windows can detect which access point is stronger and moves to the alternate channel.
Using apple's "Extend this wireless network" option removes any ability to manually configure wireless channels. I am writing this from memory, so feel free to ask questions and I will track this topic:
Procedure
Setup time capsule as your base station. Do all the setup for your wireless and guest networks. Manually configure the network and change the wireless channel to a specific channel for a/b/g networks (e.g., 3) and n networks (e.g, 167).
Plug your first airport extreme/access point into your wired network. Do not plug it into the "internet" ethernet plug, use one of the 3 ethernet switch locations
Use the airport utility to first configure it to "extend" your wired network.
Then, go in and reconfigure it manually in the airport utility. Choose the option to setup a "new network" and name the network the same as the TC wireless network name, security, etc.
Change the channel from "auto" to a different channel than the TC (e.g., 6 and 137).
Now go to the top tab and click on the "internet" icon
Go to the DHCP tab and change it to "bridge mode." This will tell the AE to not give out IP addresses (the TC will do this for you). If you get an error that the IP ranges conflict, you have not done this
Note that if you have a guest network setup, you will need to set this up on the AE as well.
Now test your airport setup. Take your client (macbook, iOS device) and connect to your network. Move to a spot near the TC and pull up a web page. Keep an eye on the signal strength and beginv moving toward the AE. Refresh the page as you move around. You should at some point see the signal strength increase. Refresh your page again. You should be now connected to to the AE. I have found that Macbooks do a better job than iOS devices because you get an extra signal bar to measure strength, and they have larger antennas which allows you to better measure problems with handoff
Another test you can do is to start backing up on your TC and then test the move. The handoff will truly show you that the TC is handling the process but the AE is relaying to the TC for backup.
If you need to setup another AE, simply follow setups 3-10.
I hope this helps others. I've done this setup 100 times on Linksys devices and although they are cumbersome, they at least allow me to do this setup much more quickly and easily than the apple products.

I had to do some serious workarounds to use the Airport Extreme Base Stations as an access point with the same wireless network name primarily due to channel overlap. I thought I would post my results here since I didnt' find a good article online.
Also, I found the Snow Leopard verison (5.4.2) of the Airport Setup Utility far superior to Lion's Airport Utility (6.x) in terms of advanced setup.
Setup is a 3 flloor house where the 3 wired network locations have wireless overlap. The problem was that the access points would not hand off the wireless signal because the channels for each airport/TC were automatically set to the same channel. In non-apple setups, this is how you force a wireless client to switch access points (since the wireless software on your client/mac/windows can detect which access point is stronger and moves to the alternate channel.
Using apple's "Extend this wireless network" option removes any ability to manually configure wireless channels. I am writing this from memory, so feel free to ask questions and I will track this topic:
Procedure
Setup time capsule as your base station. Do all the setup for your wireless and guest networks. Manually configure the network and change the wireless channel to a specific channel for a/b/g networks (e.g., 3) and n networks (e.g, 167).
Plug your first airport extreme/access point into your wired network. Do not plug it into the "internet" ethernet plug, use one of the 3 ethernet switch locations
Use the airport utility to first configure it to "extend" your wired network.
Then, go in and reconfigure it manually in the airport utility. Choose the option to setup a "new network" and name the network the same as the TC wireless network name, security, etc.
Change the channel from "auto" to a different channel than the TC (e.g., 6 and 137).
Now go to the top tab and click on the "internet" icon
Go to the DHCP tab and change it to "bridge mode." This will tell the AE to not give out IP addresses (the TC will do this for you). If you get an error that the IP ranges conflict, you have not done this
Note that if you have a guest network setup, you will need to set this up on the AE as well.
Now test your airport setup. Take your client (macbook, iOS device) and connect to your network. Move to a spot near the TC and pull up a web page. Keep an eye on the signal strength and beginv moving toward the AE. Refresh the page as you move around. You should at some point see the signal strength increase. Refresh your page again. You should be now connected to to the AE. I have found that Macbooks do a better job than iOS devices because you get an extra signal bar to measure strength, and they have larger antennas which allows you to better measure problems with handoff
Another test you can do is to start backing up on your TC and then test the move. The handoff will truly show you that the TC is handling the process but the AE is relaying to the TC for backup.
If you need to setup another AE, simply follow setups 3-10.
I hope this helps others. I've done this setup 100 times on Linksys devices and although they are cumbersome, they at least allow me to do this setup much more quickly and easily than the apple products.

Connecting DVR to Airport Extreme for remote viewing of my home 16 camera system. I have tried for 2 days and still stuck. I have secured a dyndns account and have had no luck for 2 days. A detailed list for an amateur would be much appreciated.

I have been trying for 2 days to connect my home camera dvr to the internet through my Airport Extreme. I have read several previous posts on this topic and have not been able to get this completed. I secured a Dyndns account and registered a host domain. I am not clear on which ip address to use and really which is which. Seems like the ip address for the router is different from the ip address that showed up when I secured my dyndns host name. I used the one that was listed on the signup that staed " your ip address is". I have read up on port forwarding and watched UTube and still no luck. Can someone walk me through a steo by step process on how to get this completed? I want to be able to watch my cameras from my iphone, ipad, macbook pro and the internet. I do have a manual that came with the DVR but it seems everything is setup for Windows and a different router, seems like the AE router had different settings. I can usually figure these things out eventually but I am really stuck this time. Any help at all would be greatly appreciated. Thank you in advance for any help you can offer.

Have you had any luck? I am currently attempting to do the same thing and running into similar issues.

IMac and Airport Extreme

I have a new iMac and, in the specifications for the iMac, I read the following: "Built-in AirPort Extreme wireless networking (802.11n)."
Presently, I have the iMac connected to a standalone Airport Extreme and I have two networks: one network goes to the Apple TV and the other network is connected to two Apple Express base stations. I am under the understanding that I need to have the standalone Airport Extreme and cannot get rid of it and use the iMac to connect to both of these networks, directly. Based on what I have read, it appears as though the iMac would not be able to stream in AirTunes. I understand that this is a basic question. My question is whether I need to keep the standalone Apple Express base station or whether I can stream directly to these two networks by way of my iMac? I am almost positive that the answer is "yes," (I do need to keep the standalone Airport Extreme) but I want to make sure. Thanks again for any help you might be able to offer.

Duane -
My control over the appropriate terminology leaves a lot to be desired, but I set up a network with the Extreme (the Apple TV is connected to this) and I set up another network with one of the Expresses (and joined the other Express to it). Trust me, there is a lot of confusion on this end, but I did get the Apple TV to work and the Expresses to play simultaneously, which is what I wanted. I'm just trying to see if I can ditch the Extreme so I can minimize the amount of crap on my desk.
Cheers,
-m

Incompatibility MacPro Quad-Core 2010 and AirPort Extreme for DHCP

Hello,
I have a MacPro 2.8 Ghz Quad-Core Intel Xenon 2010 EFI 1.5, for my internet, I use an AirPort Extreme Base Station version 7.4.2.
When I try to access the internet settings of the AirPort Extreme in the DHCP, the first DHCP address does not select anything in the dropdown menu.
Here is a picture screen:
http://img210.imageshack.us/img210/4995/airportdhcp.jpg
I tried with a second MacPro Quad-core 2.8 Ghz and the error persists. By cons, with a MacBook Pro 3,1 or IMac 4.1, normally I go to the menu in question.
For it is impossible to modify the airport extreme settings with an error message that afirm the first IP address is invalid.
Unable to select because the menu is empty.
I really think a bug MacPro?
Someone does have this problem?
Thank you for your help.
Roberto
Not speaking much English text translated automatically by Google.

roberto1971 wrote:
When I try to access the internet settings of the AirPort Extreme in the DHCP, the first DHCP address does not select anything in the dropdown menu.
It is possible that the new version of AirPort Utility may help:
http://support.apple.com/kb/DL955
"Resolves an issue that caused the DHCP settings tab to display incorrectly"

OWB 10gR2 : How to configure ctl and log locations for Sql*Loader mappings?

Hi all,
I'm using OWB 10gR2 to load data in tables with Sql*Loader mappings.
In my project I have a datafile module and an Oracle module.
When creating an sql*loader mapping in the oracle module, there is two properties for this mappings that I want to modify. The first is Control File Location and the second is Log File Location. Values for those properties are equal to the data file module location. When trying to change those values I can only chose "Use module configuration location".
Somebody knows how to configure those properties with different locations as the one of the flat file module?
What I want to do is to store the data file in one directory, and control file and log file in other directories.
Thank you for your help.
Bernard

Hi,
You're right, my problem is that the dropdown only show the location associated with the flat file location even if I have other file locations created in the design repository.
The good news is that I have found the solution to solve the problem :
1) Edit the file module and in tab "Data locations", add the locations you want to use for control file and log file.
2) Open configuration window of the mapping and then the dropdown for properties Control File Location and Log File Location show new locations
I have tested my mapping after changing those properties and it's working.
Bernard

Powermac G5 Dual 2.3 How to add bluetooth and airport extreme ?

Hi,
I have the above computer. I would like to know if it is possible to fit an airport extreme and bluetooth module into the machine retrospectively ?
it is a cost option which was not supplied by my company ?
Any ideas or suggestions ?

All,
I am updating the question, so that it can be on record.
I manage to get hold of one from ebay. To check that it is the correct unit you need to look at the bottom of the base unit to identify the model. The model no. would give EMC part no. 2023. The EMC part no would have to match with the read me guide.
There are no installation instruction in the guide so i had to work things out (and you need nimble fingers !).
The unit has a bluetooth module and the airport extreme attached via two black screws. The bluetooth module fits on the airport extreme card, which in turn plugs on to the motherboard.
You need to remove the fan.
The bluetooth module is held to the card via two black screws, undo the screws and take the bluetooth away from extreme card.
On the bluetooth module there is two connectors connect the wire from the motherboard on to the module, then carefully plug the bluetooth module back on to the card and then screw the black screws on to the card.
If you miss a screw then do not worry as it works okay !
( I had a plumber come around reqgrding some work, so I lost concentration, when pluging in the module)
Place the module on to the board.
Place the fan back.
Restart the machine. The aiport extreme/bluetooth module would be picked up automatically.
It took me a couple of hours to work everthing out. The hardest part is to get hold of the module.
any questions email me on [email protected] Note that i am giving the 'advice' on best efforts basis without any liability.
Powermac G5 2.3 Dual Mac OS X (10.4.2)
Powermac G5 1.8 Mac OS X (10.4.2)

Setting up airport Extreme for Remote Printing

I'm leaving town and need to be able to print to our work printer (HP LJ 1320 connected via Ethernet to AirPort Extreme 802.11n).
I also want to set up our home printer (HP LJ 1022 connected to Time Capsule via USB).
I've spent hours trying everything I can think of - changed AirPort settings, have desktops sharing printers - nothing works.
I have no problem connecting to computers over the internet - using screen sharing with ease. I am at a loss as to why printing is such a problem. any help will be hugely appreciated!

I did open those ports on my AirPorts.
I've tried setting up the printers as LPD and IPP as well as HP JetDirect - Socket, but despite pointing my print jobs at these, nothing has worked yet.
Is the Airport going to act as a print server - or is that just part of the printer? Is a server even necessary? It isn't when I'm on site with either printer.
good luck with your set-up. thanks for your input.

Using Dlink 524 as base station and airport extreme as remote?

hello,
is it possible to use a dlink 524 as a WDS base station, and set up my airport extreme as a remote station?
I have tried to use the airport setup utility however I dont seem able to connect to the internet. I have also tried to set up the Dlink, however there doesnt appear to be any referenced to WDS. Sorry, I know nothing about networks.

No the D-Link is not compatible with Apple's WDS.

Airport Extreme blocking remote access for my NAS?

Having spent over 2 hours on the phone to both LG and Apple Care I still can't get my remote access working for my NAS. I don't know much about networks, but I am slowly having to learn! Apple care seem to think that the AEBS might not be compatible?? I've tried lots of forums, lots of google self help and exhausted the customer service options - you're probably thinking I should give up. Well this is my last chance saloon - any help would be greatly appreciated.
This is my set up:
NAS: LG N2R1DD2 2 Bay DVD Network Attached Storage 2 TB
AEBS: MB763LL/A (A1301)
ISP: Virgin cable
Everything else on the NAS works a treat, it's just the remote access that is the problem. LG spent a long time on the phone looking into this and said that it is the router. I've checked with Virgin and they confirm they do not block any ports, so am pretty sure issue is with router. I've set up the NAS correctly to enable DDNS and UPnP, which it reports as successful and working correctly. I've enabled NAT port forwarding on the router, and tried to manually open up port 80.
Any thoughts would be most welcome.
Thanks.

I am not sure but I think you skipped a step. Look around for the use of consolidate library function.
I did the same thing and after I pointed to the right drive on the Airport Disk It worked flawlessly allowing me to stream to my powerbook from all over the house.
Unfortunately, once I went to bed and laptop and MyBook Pro went to sleep, I started havong problems.
Looks like this function of Airport n is still very Alpha.
Hope that helps

How come my iMac and MacBook connect to my AirPort Extreme but my iPhone and iPad 2 won't?

How come my iMac and MacBook connect to my AirPort Extreme but my iPhone and iPad 2 don't?

Sorry, I should have been more clear. I am asking if the DNS IP addresses, not the IP addresses assigned by the DHCP service, are the same. DNS is like the Internet's version of the Yellow Pages. Your ISP typically will provide them to you or you can elect to use those provided by another source, like OpenDNS.
DNS is the service that translates a website's URL to its actual IP address so that you can access it. I am just trying to rule out that the PC is not configured properly with the correct DNS IP information.
The other thing to check is if the PC is configured to use a Proxy service. By default, it would not be.
Finally, what is the make & model of the PC. More importantly, if the PC is using either a PCI or USB wireless adapter, what is its make & model?

How to set up Airport Extreme for 11ac and 11n?

I have just purchased the new Airport Extreme (August 2014) because Apple's website states
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
I then looked for some documentation for setting up but cannot find anything.
Hence my question here.
How to set up Airport Extreme for 11ac and 11n simultaneously?
At present the new Extreme is no better than my previous 2 year old one.
Thank you.
Michael

How to set up Airport Extreme for 11ac and 11n simultaneously?
Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
That is advertising. The real information is usually found in the small and hard to read footnotes:
Based on theoretical peak speeds. Actual speeds will be lower.
AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
Please report on your results.

I am using an Airport Extreme for wireless and a Netgear VPN Switch for wired connections. How do I get the two networks to connect?

I am using an Airport Extreme for wireless and also have a Netgear VPN Switch (FV5318) for internal wired ethernet connections. How do I get the two networks to connect to each other?

Tesserax, I would like to keep the Airport Extreme in nplace before the Netgear FVS318 switch because I am using all of the 8 ethernet outputs distributed to 8 differerent locationsl This way I can just use one of the LAN outputs from the Airport to feed the FVS318. Here is what I think I am hearing you say:
Tne reason why the wired and wireless devices are not communicating is because the FVS318G is also a DHCP server and in conflict with the AEBS.
To remedy the situastion here is probably what I need to do in order:
1. Change the LAN IP Address of the Netgear FVS318G to be the same subnet of the Airport Extreme.
2. Then, disable the Netgear FVS318G as a DHCP server.
3. Make sure the ethernet cable from the LAN port of the Airport Extreme connectis to the LAN port of the Netgear FVS318G.
4. Restart everything.
Can you provide me the steps I need to take to get the right IP addresses from the Airport Extreme to put into the Netgear to fix the conflict? I have the Airport Utility. I also have two airport express hot spots, and two Apple TVs in addition to computers attached to the 8 ethernet lines.
Thank you.
Steve

How do I set up Airport Extreme with cable modem and router?

Hi--
I'm having a house built and all of the wiring for TV, phone, and internet will be centralized in a closet. The cable modem can be placed there as well. In one room in the basement I want to use my Airport Extreme for my iMac and USB external hard drives. In another location of the basement, I'd like to set up a Time Capsule for another desktop and USB printer. If the cat5e comes out of the wall at each location, I "think" I need a router at the closet location. I also thought I might need an Airport Express upstairs on first or second floor to boost signal for my laptop. The house isn't that big so maybe that's overkill. So beyond the router question, do I want to set up a roaming network and have the Airport Express connected via ethernet or just wireless if the thought is that I need this? Finally, if I should connect cable modem to router to Airport Extreme, Time Capsule, etc., in what order and ports does the equipment get connected? Many thanks!!

Welcome to the discussions, Forum Girl!
It would be best to position the cable modem and main router in the central location like the closet if possible. The other devices would connect via ethernet to the wall jacks in each room.
If you could setup a "roaming" wireless network as you mention, this will give you better wireless performance and coverage. This is the way commercial establishments like airports, businesses, etc. are configured for wireless.
The order of connection would go something like this: ethernet connection > cable modem >main router>devices. Devices could be computers, routers, a backup device, etc. Since the Extreme has only 3 LAN ports for ethernet connections, you will also need to plan to install an "ethernet switch" near the location of the main router to provide enough ethernet jacks. If you are planning to use DirectTV, etc or your audio/video devices require ethernet connections (most new products do for updates and extra features), be sure to plan for that as well.
Make sure that CAT5e or CAT6 wiring is run so you will be able to take advantage of faster gigabit speeds.
Finally, it would be a good idea to work with an IT specialist to go over your plans to make sure all the bases are covered. This would be money well spent.

How to configure iMac and Airport Extreme for remote access?

Similar Messages

Maybe you are looking for