How to Configure internet channel to a relay SMTP server

Hi men,
My problem is How to Configure internet channel(or outbound mail) sending to a relay SMTP server. I want to test my spam software.
I have search and read Sun Messaging Administration document but haven't fought the guide.
./imsimta version
Sun Java(tm) System Messaging Server 7.0-0.04 32bit (built Jun 20 2008)
Thank and Regards,
Duc Tien.

tien86 wrote:
My problem is How to Configure internet channel(or outbound mail) sending to a relay SMTP server. I want to test my spam software. You can use the daemon channel keyword with the tcp_local channel e.g.
! tcp_local
tcp_local smtp nomx multiple remotehost inner switchchannel identnonenumeric \
pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tcp_auth loopcheck \
daemon relay.yourdomain.com
tcp-daemonIf the relay SMTP server only has an A record then use "nomx" instead of "mx".
http://msg.wikidoc.info/index.php/Mx%2C_nomx%2C_nodns%2C_defaultmx%2C_randommx%2C_nonrandommx%2C_nameservers%2C_defaultnameservers_Channel_Options
The "multiple" keyword instead of "single_sys" helps performance by increasing the number of emails per connection when sending to a relay system.
http://msg.wikidoc.info/index.php/Multiple%2C_addrsperfile%2C_single%2C_single_sys_Channel_Options
Regards,
Shane.

Similar Messages

How to configure sap to use gmail as smtp server?

Hi experts,
I need to know how to configure gmail as my smtp server. In the scot transaction I don't see anywhere where to specify whether it is a ssh connection, ports for secure smtp, username, password.
Does anyone know how to configure sap to use gmail as the smtp server?
I've seen some similar threads about this, but they are of no help. Although they are classified as answered, in most cases the reason they are answered is because the person who made the query dropped the cause trying to make it work. I'd like to know for sure is this is possible or not.

Hi Camilo,
You can't set up gmail as your smtp server to handle this. gmail is an email server which generally are based on POP protocol. now for SAP to send mail to gmail, you would need one SMTP capable server which can relay those message received from SAP to configured email address.
As of WAS 6.10 SAP kernel supports SMTP without more components. i.e e-mails can be sent (or received) from the SAP system to each SMTP-compatible mail server. see SAP note 455140 for more details.
Hope this clarifies your doubt.
http://en.wikipedia.org/wiki/SMTP_server
Regards,
Debasis.

Reg: How to Configure internet for solaris 10 in x86 32 bit

Hi,
I am new to Sun Solaris can any one help me detailed step of how to configure internet for standalone pc. Thanks in Advance
Thanx
MA

OK, the classical way:
Open a terminal.
Type
ifconfig -a
ifconfig -a plumb
ifconfig -a
Note the differences, it will plumb ALL available interfaces this way. So, now you can see, which device is your network card.
Then perform a
ifconfig <interface> unplumb
for all the newly interfaces (aka those, that were new in the last ifconfig -a output).
Then, the simple way:
cd /etc
vi hostname.<interface-driver-name>0 (example: hostname.rge0, the driver would be rge, the instance is 0, and rge0 would have been displayed as an available interface in the last ifconfig command). Add the name of the host into this file.
Then
vi /etc/inet/hosts
and add the pair of IP-address and hostname.
If needed:
vi /etc/inet/netmasks
if you have a sub-divided network, and you need a differenbt subnet mask...
Then:
vi /etc/defaultrouter
and add the name or ip-adress of the gateway... (name only, if you have that name also in the /etc/inet/hosts file!)
Also:
vi /etc/nodename
and add the name of your host into that file, so that the system knows, who it is... ;-)
And: For the DNS you can then add the infos into:
/etc/resolv.conf
For example:
nameserver 192.168.2.1
or some such...
Then, as the last but one step:
ls /etc/nsswitch.*
and:
cd /etc
cp nsswitch.<what you need> nsswitch.conf (should be .files here!)
And the reboot... ;-)
HTH!
Matthias
P.S.: There might be some GUI, but I'm an old-timer, so I prefer the command-line version of things...

How to configure Internet settings on Iphone 4, os 4.3

Hey I got replacement handset from apple store...But the problem is I lost my internet and mms settings ....How to configure internet and mms in os 4.3??Hey I got replacement handset from apple store...But the problem is I lost my internet and mms settings ....How to configure internet and mms in os 4.3??

There are none unless it's built in to the Skype app.

How to configure Adobe LiveCycle designer on my SAP Server?

Dear friends.
I have installed SAP ECC 6.0 and Adobe LiveCycle designer ES 8.2 on my computer.
Now I want to use Adobe LiveCycle designer in SAP by TCODE:SFP.
Please tell me how to configure Adobe LiveCycle designer on my SAP Server in details.

Hi MSReddy,
You don't need to configure it on SAP server. It should be installed on you desktop only.
Install ADLC on your desktop and open SFP it should work. If its not showing you the layout it means you are using wrong version of ADLC. Use ADLC downloaded from SAP Service market place only.(service.sap.com), else it will create problems.
Regards,
Vaibhav

How to configure the ESS portal in ehp 6 server?

Dear All,
Pls advice me how to configure the ESS portal in my client server?
I want to create new iviews ,pages,workset and link them all to R/3,with total configuration steps please.
Thanks and Regards,
Pradip

hi pradeep ,
which version r u using wdjava or abap ? ......if ur using java you have to do all in home page framework and if you are using with launchpad from EHP5 better you can create it from launchpad by going to t -code LPD_CUST and select the ROLE:ESS and INSTANCE: MENU
REFER Below............
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e09b3304-07d8-2b10-dbbf-81335825454f?QuickLink=index&overridelayout=true&38388417774934
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a?QuickLink=index&overridelayout=true&5003637159921
http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=31476&bc=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/108c31e7-b6a7-2d10-3692-c1a9f7a5c4dc?overridelayout=true

How to configure internet proxy for portlet builder

Hi All,
We have downloaded the portlet builder from developer.bea.com. But while trying
to access xmethods for adding web service, it can't access as the internet connection
is thru proxy.
Can anybody pls tell me how to configure the internet proxy with this portlet
builder ?
TIA,
Sudarson

Hi, I got the same problem...I try to configure a web service with Portal Builder
7.0 in Bea E-Business Control Center... But I can not proceed cause there is no
hint for a proxy... Have you found a solution?
"sudarson" <[email protected]> wrote:
>
Hi All,
We have downloaded the portlet builder from developer.bea.com. But while
trying
to access xmethods for adding web service, it can't access as the internet
connection
is thru proxy.
Can anybody pls tell me how to configure the internet proxy with this
portlet
builder ?
TIA,
Sudarson

How to configure ether channel

Hi mates,
As far as I know, when you configure ether channel (PAGP/LACP) on two ports, they act like one port. but in reality packets are not sent through both ports. Only one of the ports is used until the actual link fails.
Question is:
I have two switches, each has two SFP ports, I want to connect two switches each other.
how can I make ether channel always use both ports when sending/transmitting packets? I remember it is possible.
thanks for helping :)

HI
i hope this link will help u .
http://www.cisco.com/en/US/products/hw/switches/ps663/products_configuration_example09186a0080094aec.shtml
when u create ether-channel it will automatically load balance based on source/destiantion mac address or source/destiantion ip address.
Thanks
Mahmood

How to configure internet domain name for P6 website using weblogic

After installing and configuring weblogic for P6 you get the following address https://servername:7002/console/login/LoginForm.jsp to access P6 website. Anyone know how to configure a purchase domain such as www.mydomain.com have it redirect to https://servername:7002/console/login/LoginForm.jsp Is this configured in weblogic server? If not, what is needed to redirect the purchased domain?

HI
You could have that domain resolving to/by some DNS servers and set up a load balancer / proxy to redirect every incoming request to that domain / site to your weblogic console.
however , what is it you are trying to do? It is very unsual of redirecting/ using Domain names to redirect to wls consoles.
could you explain your use case in detail please
Sri

How to configure oracle thin drivers for SUN APPLICATION SERVER

hi all,
I am working with EJB with oracle as back-end. I wants to know how to configure oracle thin drivers for the SUN APPLICATION SERVER. Please explain me breifly.
Advanced thanks to all the replies.
with regards,
/kumaraswamy.n

Kumaraswamy,
Did you try searching the Internet? Here are the results of my Internet search:
http://tinyurl.com/zo4gk
And one of the first hits in the list was this:
Deploying to a Sun Java System Application Server
Good Luck,
Avi.

How do I delete multiple copies of a SMTP server under iOS 7.0.6 on an iPhone 5S?

I have a conflict in trying to set up email using the iPhone mail application. I had to change the password for the email account, which was done via the host's control panel. I am able to send and receive mail (POP) via the computer and logging in through the provider webmail. I have deleted the mail account multiple times on the iPhone and keep getting an user authentication error when setting up as new.
The only was to fix this was to revert back to the password originally in use prior to the change. The provider was watching the log files as I tried to change the settings on the iPhone and also was seeing the user authentication error when using a new password. Once I changed it back to the old password, all worked fine.
They think that because there are now multiple instances of the SMTP server listed, that the login is actually pulling the info from the old SMTP server info, even though all the others are turned 'off' in the settings.
I can find no way to permanently delete all the instances of this SMTP server so that I can set the account up as totally new.
How do I do this?
Thanks.

SteveSRT4 wrote:
All of the sudden, my itunes digital copy movies are on the iPad (were not before upgrading), and there is no button to delete them. They are not set to sync through iTunes, and i cannot get rid of them.
Are you sure they are on the device? Sounds like they are just in iCloud. Do they have a cloud icon next to them? If they do they aren't on your device and as such not taking up space. If you don;t want to see them you can go to Settings->Videos->Show All Videos and turn it off. This will hide all your iCloud movies from the videos App. but again they aren't really on your device.
SteveSRT4 wrote:
Lastly, with the new Video app, how can i get it to list the name of the movie on the listing screen under the picture? I have to tap a movie to find out what it is. I NEED to be able to see the movie names without having to touch each one individually.
Thanks.
Unfortunately that's not something you can change. To see the titles you need to tap on the movie. I guess Apple assumes the cover art already has the name so there is no need to repeat it.

How to Configure Internet on Solaris 10

Hi Guys,
I recently installed Solaris 10 on Vmware Workstation 7.0.1. I'm trying to get Internet to work in the solaris virtual machine by sharing it from the host machine but have not been successful.The Solaris Virtual Machine NIC is using NAT. Please help.
Thanks
kisad

Thank You for your reply. This is what i have configured.
ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 10.0.0.51 netmask ffffff00 broadcast 10.0.0.255
ether 0:c:29:42:c3:b4
netstat -rnv
IRE Table: IPv4
Destination Mask Gateway Device Mxfrg Rtt Ref Flg Out In/Fwd
default 0.0.0.0 10.0.0.1 1500* 0 1 UG 0 0
10.0.0.0 255.255.255.0 10.0.0.51 e1000g0 1500* 0 1 U 0 0
224.0.0.0 240.0.0.0 10.0.0.51 e1000g0 1500* 0 1 U 0 0
127.0.0.1 255.255.255.255 127.0.0.1 lo0 8232* 0 9 UH 278 0

How to configure Internet connection?

I've just installed Solaris 10 x86.
It did not detect and configure the ethernet card, which is connected to a DSL router. How do I set this LAN?

You need to identify the ethernet card. The name of the device depends on the type of card. Once you have the name of the device you can use the ifconfig (see man pages) to configure it. Usually,
ifconfig devnam plumb
ifconfig devnam dhcp
will get the interface up and running from your router, then you will need to add the domain name servers to
/etc/resolv.conf
and
copy /etc/nsswitch.dns to /etc/nsswitch.conf
to get the naming services working.
It may be neccessary to add a default route to your router using something like
route add default 192.168.0.1

How to configure Internet/

Hi i have installed Solaris 10 u5 now and I also have the LAN connection. So my query is How should I configre the LAN? like IP Address, DNS..

my best guess would be
ifconfig <interface> dhcp
if you don't know what that interface is.. find it with ifconfig -a plumb
then configure the one that comes up.. if it is more than one.. use snoop to find out which one is connected to you switch...
vi your /etc/resolv.conf and add the right entries...
then
route add default <ip of your main router>

How to configure Internet over BT?

Hi,
I have bought a SonyEricsson m600i, and I'm trying have internet over bluetooth on my phone with a EP-2101\A1 (This comes with Toshiba 3.00 driver, I downloaded 4.00 driver - for XP SP2).
I don't know if anyone has the same setup of phone AND bt stack...
I have been trying almost every setting to make them connected, but I think, EP-2101 needs a NEW driver.
Please have a look at this picture: I can make COM connection, but I can't make a NETWORK connection (DISCONNECTED BT on the picture!!)between my things:
http://wolf.miki.hu/status.jpg
Does anyone have any idea how to establish NETWORK connection between my SE m600 and my EP2101\A1 BT?

Hello
If the paring between your PC and mobile phone is successfully you must add your mobile phone as new modem. This option you can find under Phone and modem options > Modems tab you can find it under Control Panel.
After that you must create new dial up connection and as modem choose your BT mobile phone. With right number you will be able to establish the connection and use it for Internet.
I have done this on this way for a long, long time. I hope that i didnt write something wrong. Please let me know if you will have success!
Good luck!!!

How to Configure internet channel to a relay SMTP server

Similar Messages

Maybe you are looking for