How to configure Internet settings on Iphone 4, os 4.3
Hey I got replacement handset from apple store...But the problem is I lost my internet and mms settings ....How to configure internet and mms in os 4.3??Hey I got replacement handset from apple store...But the problem is I lost my internet and mms settings ....How to configure internet and mms in os 4.3??
There are none unless it's built in to the Skype app.
Similar Messages
-
Reg: How to Configure internet for solaris 10 in x86 32 bit
Hi,
I am new to Sun Solaris can any one help me detailed step of how to configure internet for standalone pc. Thanks in Advance
Thanx
MAOK, the classical way:
Open a terminal.
Type
ifconfig -a
ifconfig -a plumb
ifconfig -a
Note the differences, it will plumb ALL available interfaces this way. So, now you can see, which device is your network card.
Then perform a
ifconfig <interface> unplumb
for all the newly interfaces (aka those, that were new in the last ifconfig -a output).
Then, the simple way:
cd /etc
vi hostname.<interface-driver-name>0 (example: hostname.rge0, the driver would be rge, the instance is 0, and rge0 would have been displayed as an available interface in the last ifconfig command). Add the name of the host into this file.
Then
vi /etc/inet/hosts
and add the pair of IP-address and hostname.
If needed:
vi /etc/inet/netmasks
if you have a sub-divided network, and you need a differenbt subnet mask...
Then:
vi /etc/defaultrouter
and add the name or ip-adress of the gateway... (name only, if you have that name also in the /etc/inet/hosts file!)
Also:
vi /etc/nodename
and add the name of your host into that file, so that the system knows, who it is... ;-)
And: For the DNS you can then add the infos into:
/etc/resolv.conf
For example:
nameserver 192.168.2.1
or some such...
Then, as the last but one step:
ls /etc/nsswitch.*
and:
cd /etc
cp nsswitch.<what you need> nsswitch.conf (should be .files here!)
And the reboot... ;-)
HTH!
Matthias
P.S.: There might be some GUI, but I'm an old-timer, so I prefer the command-line version of things... -
How to Configure internet channel to a relay SMTP server
Hi men,
My problem is How to Configure internet channel(or outbound mail) sending to a relay SMTP server. I want to test my spam software.
I have search and read Sun Messaging Administration document but haven't fought the guide.
./imsimta version
Sun Java(tm) System Messaging Server 7.0-0.04 32bit (built Jun 20 2008)
Thank and Regards,
Duc Tien.tien86 wrote:
My problem is How to Configure internet channel(or outbound mail) sending to a relay SMTP server. I want to test my spam software. You can use the daemon channel keyword with the tcp_local channel e.g.
! tcp_local
tcp_local smtp nomx multiple remotehost inner switchchannel identnonenumeric \
pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tcp_auth loopcheck \
daemon relay.yourdomain.com
tcp-daemonIf the relay SMTP server only has an A record then use "nomx" instead of "mx".
http://msg.wikidoc.info/index.php/Mx%2C_nomx%2C_nodns%2C_defaultmx%2C_randommx%2C_nonrandommx%2C_nameservers%2C_defaultnameservers_Channel_Options
The "multiple" keyword instead of "single_sys" helps performance by increasing the number of emails per connection when sending to a relay system.
http://msg.wikidoc.info/index.php/Multiple%2C_addrsperfile%2C_single%2C_single_sys_Channel_Options
Regards,
Shane. -
How to configure internet proxy for portlet builder
Hi All,
We have downloaded the portlet builder from developer.bea.com. But while trying
to access xmethods for adding web service, it can't access as the internet connection
is thru proxy.
Can anybody pls tell me how to configure the internet proxy with this portlet
builder ?
TIA,
SudarsonHi, I got the same problem...I try to configure a web service with Portal Builder
7.0 in Bea E-Business Control Center... But I can not proceed cause there is no
hint for a proxy... Have you found a solution?
"sudarson" <[email protected]> wrote:
>
Hi All,
We have downloaded the portlet builder from developer.bea.com. But while
trying
to access xmethods for adding web service, it can't access as the internet
connection
is thru proxy.
Can anybody pls tell me how to configure the internet proxy with this
portlet
builder ?
TIA,
Sudarson -
How to configure SIP settings on Nokia E51
Hello to all.
I need help. I have
Username
Authentication Username
SIP address
SIP Password
Domain
Outbound Proxy
in one of big SIPs provider but i cant configure my phone work with it. Please help me. I allready installed SIP Voip settings from nokia store.Have you checked out this post upon forum http://discussions.nokia.com/t5/Connectivity/Nokia-E51-SIP-Settings/m-p/481535/highlight/true#M24073 or this resource?http://www.voip-connections.com/wp-content/uploads/2011/06/How-to-configure-Nokia-E51-and-E71-to-con...
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
How to configure internet domain name for P6 website using weblogic
After installing and configuring weblogic for P6 you get the following address https://servername:7002/console/login/LoginForm.jsp to access P6 website. Anyone know how to configure a purchase domain such as www.mydomain.com have it redirect to https://servername:7002/console/login/LoginForm.jsp Is this configured in weblogic server? If not, what is needed to redirect the purchased domain?
HI
You could have that domain resolving to/by some DNS servers and set up a load balancer / proxy to redirect every incoming request to that domain / site to your weblogic console.
however , what is it you are trying to do? It is very unsual of redirecting/ using Domain names to redirect to wls consoles.
could you explain your use case in detail please
Sri -
How to wipe Internet settings clean
Some time back I hooked ethernet (Roadrunner) to my Powerbook. Ever since I am unable to get into my own network over airport. I keep getting that my machine has a self assigned IP address and I can't get Internet. I have tried all the hints here in the forums and nothing works. I even dropped into the terminal using ipconfig and checked en0 for the ipaddress.
How can I wipe the settings on this powerbook and gain wireless access to the Internet again? The funny thing is I can jump on my neighbors network and surf all day with no problem, yet I can't get into my own Internet. I have security on WEP and can get access to the router, but it isn't assigning me a new ip no matter what I do.
I have tried Dlink 524 and the New Belkin G+ routers and all to the save avail... NO internet, yet I can log into the network.
I have reset the Earthlink Cable modem, reset the router, changed routers, created a new user and it is all the same.
Anyone know how to fix this?
I am stumped.
Thanks in advance.
G5 DP 2.0, 20" FPw, Raptor boot drv. & Seagate 160 Mac OS X (10.4.6) S/E W600iI'd try a few things...
first off.... turn off computer, router, modem, etc.
then unplug the AC power from the cable modem AND unscrew the coax cable from it. Let sit for like 10 minutes.
Then screw coax cable back into box, plug in AC, reconnect to router, and plug in router, etc.
When your mac starts up, test and see if it works.
If not.... then go to Sytem Preferences/Network
then click on SHOW and select Network Port Configurations.
Then DELETE your aiport or wireless settings, etc.
Under the LOCATION tab, do the same...and delete locations...
Then click apply now...restart computer.
then go back to System Preferences/Network.
go to SHOW and select NETWORK STATUS
you may see an option for your internet connection with either a green dot or red dot next to it. Red dot usually means there's no internet connection.
Double click on it.
It will take you to the TCP/IP/PPPoE/AppleTalk/Proxies/Ethernet settings. If your internet setup is by using a DHCP, click on RENEW DHCP Release button a couple times (waiting a few seconds in between each clicking).
Then apply now, once you setup your settings, etc..... Then restart.
Upon restart, check your router settings. Your router may have simply wigged out....may just need to be reset... check your DHCP or IP settings on the router and make sure that WEP passwords are correct etc.
I can't think of anything more. I hope this helps. -
How to configure network settings in solaris 10
hi
i have downloaded solaris 10 and installed on dell dimension desktop,as i have gone through the instalation guide,i see i dont get netwotk configuration (DNS,DHCP.....)settings during installation,it havent asked me about those settings,It just asked the host name ..after installation i see no network connection even i have my cable connected.ethernet cable connected Its INTEL
can anyone help me how to resolve this issueYou could try the Dell site, but I doublt if they will have a driver for Solaris, Linux maybe but not Solaris. Otherwise try the DriverGuide web site. http://www.driverguide.com/
You could also try installing OpenSolaris if you don't specifically need Solaris 10. Better chance that OpenSolaris will support the NIC. -
How to change Network Settings on iPhone OS 3.1.3 on my iPhone 3G?
I'm using the iPhone 3G locked with Bharti Airtel in India. Airtel, for a brief time was authorized to unlock the iPhone 3G after the completion of contract period of a year but, now it doesn't.
Airtel has three network settings but I'm unable to change the settings. I need to change it to use unlimited data plan. Is there any official way to change it? and if not, will it possible to change the settings after I unofficially unlock it? Please suggest.
P.S. I'm running the latest iPhone OS 3.1.3sangeet.b wrote:
I'm using the iPhone 3G locked with Bharti Airtel in India. Airtel, for a brief time was authorized to unlock the iPhone 3G after the completion of contract period of a year but, now it doesn't.
Airtel has three network settings but I'm unable to change the settings. I need to change it to use unlimited data plan. Is there any official way to change it?
The ability to change the APN settings on the iPhone depends on the carrier file. Basically the carrier has told Apple if they want the settings to be enabled or not. In the case of the iPhone in Canada all carriers do not allow for the APN settings to be changed, and it would appear that Airtel is the same.
If the iPhone is being used properly with the carrier that the iPhone is locked to there should be no reason to change the APN settings.
sangeet.b wrote:
will it possible to change the settings after I unofficially unlock it? Please suggest.
P.S. I'm running the latest iPhone OS 3.1.3
As far as unlocking the iPhone goes the only way it to see if your carrier will unlock it for you. According to Apple you are correct in saying that Airtel does not offer unlocking, but you can always call them to double check.
http://support.apple.com/kb/HT1937
Hacking the iPhone is not recommended, and can not be discussed here on this forum. You can search Google, but if you are running 3.1.3 hacking your iPhone to unlock it might not even be an option.
http://support.apple.com/kb/HT3743 -
How to Configure Internet on Solaris 10
Hi Guys,
I recently installed Solaris 10 on Vmware Workstation 7.0.1. I'm trying to get Internet to work in the solaris virtual machine by sharing it from the host machine but have not been successful.The Solaris Virtual Machine NIC is using NAT. Please help.
Thanks
kisadThank You for your reply. This is what i have configured.
ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 10.0.0.51 netmask ffffff00 broadcast 10.0.0.255
ether 0:c:29:42:c3:b4
netstat -rnv
IRE Table: IPv4
Destination Mask Gateway Device Mxfrg Rtt Ref Flg Out In/Fwd
default 0.0.0.0 10.0.0.1 1500* 0 1 UG 0 0
10.0.0.0 255.255.255.0 10.0.0.51 e1000g0 1500* 0 1 U 0 0
224.0.0.0 240.0.0.0 10.0.0.51 e1000g0 1500* 0 1 U 0 0
127.0.0.1 255.255.255.255 127.0.0.1 lo0 8232* 0 9 UH 278 0 -
How to configure print settings in smartforms
Hello friends,
I was given a task to develop smart forms..everythign is working fine but i am left with following queires,
so far i ddint maintain any print related parameters,
i understand i need to work on three parameters now
1)CONTROL_PARAMETERS
2) OUTPUT_OPTIONS
3) USER_SETTINGS
now i have seen other forms at our place and seen
in control parameters they pass
p_control-langu = 'EN'.
p_control-no_dialog = 'X'.
in output
p_output-tddest = 'LP05'.
p_output-tdnewid = 'X'.
and for user_settings
user_settings = ' '
but
the same changes are giving me error....
can any one tell me why?
next if i remove them and give them at runtime i get no sort of problem..
so how i do give them with in program?
next what si the role of user_settings...
why is it ' '...
shud it be 'X'..
next when i give print parameters in DEVELOPMENT..
when i move it to QUALITY...(settings will remain same as DEV) will it cause problmes?(like may be in QUA p_output-tddest = 'LP05'. needs to be modified?)..
any links,material to help me know more abt this issue wil be rewarded..
thnaksHi kumar,
Please find the below thread.....
convert smartform output into pdf
Re: Euro symbol in PO Layout output preview
data: C_FORMNAME TYPE TDSFNAME.
DATA: G_FM_NAME TYPE RS38L_FNAM.
c_formname = 'ZKAR_SF2PDF_EXMPL'.
To get output device type
CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
EXPORTING
I_LANGUAGE = V_LANGUAGE
I_APPLICATION = 'SAPDEFAULT'
IMPORTING
E_DEVTYPE = V_E_DEVTYPE.
ST_OUTPUT_OPTIONS-TDPRINTER = V_E_DEVTYPE.
ST_CONTROL_PARAMETERS-NO_DIALOG = 'X'.
ST_CONTROL_PARAMETERS-GETOTF = 'X'.
Call Function to get the Function Module name for the smart form
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = C_FORMNAME
IMPORTING
FM_NAME = G_FM_NAME.
IF SY-SUBRC 0.
Check for Errors
ENDIF.
Call Smartform function module without hard coding
CALL FUNCTION G_FM_NAME
EXPORTING
CONTROL_PARAMETERS = ST_CONTROL_PARAMETERS
OUTPUT_OPTIONS = ST_OUTPUT_OPTIONS
USER_SETTINGS = 'X'
ADD YOUR DATA STRUCTURES HERE
IMPORTING
DOCUMENT_OUTPUT_INFO = ST_DOCUMENT_OUTPUT_INFO
JOB_OUTPUT_INFO = ST_JOB_OUTPUT_INFO
JOB_OUTPUT_OPTIONS = ST_JOB_OUTPUT_OPTIONS
TABLES
ADD YOUR DATA TABLES
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC 0.
On Failure display standard Message
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
Also see this related note:
Note 1072424 - Error from SSF_GET_DEVICE_TYPE when lang is not installed.
Reward points.....
Regards,
Sreenivasa Sarma K.
Edited by: sharmashree kashi on Apr 7, 2008 4:03 PM -
How to transfer app settings from iPhone?
We only got the iPad in the Uk today so apologise if these are obvious questions!
Is it possible to sync/transfer settings from my iPhone to iPad. I set up my new iPad and would like iPhone settings on the iPad to be synced e.g. preferences of an app etc. Is this possible or will the devices work independently. I am not a games fan but I do indulge in Angry Birds, the iPad version has lost all my settings! Is it possible for both devices to sync settings so that whatever platform I play on the settings will be updated?
I have not yet Kindle yet, are page marks etc synced between the devices?Actually it does not work that way. Actual program settings might, in a few Apps, be retained upon backup. But no data are permitted to be stored in backup by 3rd party apps. Only Apple Apps will retain data. Everything else had to be started anew on the iPad.
That is, your notes, contacts, address book, data will get backed up and synced. But ToDo apps, for example, will not sync your data and you will need to start tons fresh on iPad. Neither will any of your games settings be retained, and you will be back to Level One on all of them. -
How to configure Internet connection?
I've just installed Solaris 10 x86.
It did not detect and configure the ethernet card, which is connected to a DSL router. How do I set this LAN?You need to identify the ethernet card. The name of the device depends on the type of card. Once you have the name of the device you can use the ifconfig (see man pages) to configure it. Usually,
ifconfig devnam plumb
ifconfig devnam dhcp
will get the interface up and running from your router, then you will need to add the domain name servers to
/etc/resolv.conf
and
copy /etc/nsswitch.dns to /etc/nsswitch.conf
to get the naming services working.
It may be neccessary to add a default route to your router using something like
route add default 192.168.0.1 -
How to configure Internet/
Hi i have installed Solaris 10 u5 now and I also have the LAN connection. So my query is How should I configre the LAN? like IP Address, DNS..
my best guess would be
ifconfig <interface> dhcp
if you don't know what that interface is.. find it with ifconfig -a plumb
then configure the one that comes up.. if it is more than one.. use snoop to find out which one is connected to you switch...
vi your /etc/resolv.conf and add the right entries...
then
route add default <ip of your main router> -
How to configure Internet over BT?
Hi,
I have bought a SonyEricsson m600i, and I'm trying have internet over bluetooth on my phone with a EP-2101\A1 (This comes with Toshiba 3.00 driver, I downloaded 4.00 driver - for XP SP2).
I don't know if anyone has the same setup of phone AND bt stack...
I have been trying almost every setting to make them connected, but I think, EP-2101 needs a NEW driver.
Please have a look at this picture: I can make COM connection, but I can't make a NETWORK connection (DISCONNECTED BT on the picture!!)between my things:
http://wolf.miki.hu/status.jpg
Does anyone have any idea how to establish NETWORK connection between my SE m600 and my EP2101\A1 BT?Hello
If the paring between your PC and mobile phone is successfully you must add your mobile phone as new modem. This option you can find under Phone and modem options > Modems tab you can find it under Control Panel.
After that you must create new dial up connection and as modem choose your BT mobile phone. With right number you will be able to establish the connection and use it for Internet.
I have done this on this way for a long, long time. I hope that i didnt write something wrong. Please let me know if you will have success!
Good luck!!!
Maybe you are looking for
-
Currently our architecture office runs iPhoto buddy to manage our iPhoto libraries but we want to be able to have multiple users viewing the same iPhoto Library? Currently it only allows one user to access this library. How do we do this?
-
I'm using the tree component for a little Windows Parody I'm making. In my .fla, There's a tree component that loads an external XML file. I can't figure out how to add custom icons to my component, though. I know it's possible to set the icons for
-
My wife's original iMac 20" suddenly today went fans full on. She turned it off by holding the on/off button for some time. Now it won't start up. With the back off led 1 if on, and led 2 is flashing. I've found reference to led 2 off and led 2 on, b
-
Is there any possible way to get more gigabytes pn my iPhone 4?
I need help figuring out if you can get more GB on an iPhone 4
-
WebDynpro Exception: The ADS call has failed. You can find information abo
hi, I have created the From . when i try to run the application .i am getting the folllowing error . Is there any solution for that? WebDynpro Exception: The ADS call has failed. You can find information about the cause in the error.pdf on the applic