How to configure IP Address filter in Controller based Access Points ?

Dear Team,
Configuration:
i have 5508 series controller and joined the two Thin APs to the controller. WLAN controller is connected to PC where Multicast receiver is running for two Multicast IP addresses (IP1: 230.1.1.1, IP2: 230.1.1.2). Multicast sender is running for two IP addresses on Station.
Requirement:
When Station is associated to AP1, AP1 should block the multicast packets going to AP2 and vice versa . That is AP1 should be configured to block multicast packets going to 230.1.1.2 and AP2 should be configured to block multicast packets going to 230.1.1.1.
Thanks,
Harsha

I believe you could apply ACLs and check if that helps.
For more details about configuring ACLs, please refer to the following link:
http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-0/configuration-guide/b_cg80/b_cg80_chapter_0110101.html#task_AA3AFA57D51647478E0C3511137C165E
Hope that helps.

Similar Messages

Cisco Outdoor Controller Based Access Point

Hi,
I am looking for Cisco Outdoor Controller Based access point model. The WLC is Cisco 2500 Series.
I have checked couple of outdoor models but all are mesh access point. I am looking for normal controller based outdoor access point ( just like controller based indoor access point models )
Thanks.

adding to Leo...
Cisco Aironet 1300 Series
http://www.cisco.com/en/US/products/ps5861/index.html
Cisco Aironet 1550 Series
http://www.cisco.com/en/US/products/ps11451/index.html
Cisco Aironet 1520 Series
http://www.cisco.com/en/US/products/ps8368/index.html
these all are Cisco OUTdoor APs.
Now u can choose as per ur req.
Regards
Dont forget to rate helpful posts

Controller-based access points conversion

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
Q:
I’ve the 1140 AP (LAP) flavor; can I convert it to Standalone access points?
If yes can you please explain how and if you have documentation that will be great.
Thank you all for reading and helping.

You can convert the AP from autonomous AP (aAP) to light-weight AP (LWAP) and vice versa. It all boils down to the IOS you run.
If you have a WLC, ollow the proceedure below:
Using a Wireless LAN Controller to Return to a Previous Release
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp157689
If you don't have a WLC, follow the proceedure below:
Using a Wireless LAN Controller to Return to a Previous Release
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp157689
If you find my post helpful, please do not hesistate to rate. Thank you very much.

How can i add and configure a new AIR-LAP1142N-E-K9 Access Point to a AIR-WLC4402-12-K9 WLAN controller

How can i add and configure a new AIR-LAP1142N-E-K9 Access Point to a AIR-WLC4402-12-K9 WLAN controller

Thanks alot, that helped me .....
what about option 43..i am using one wlc and the switch where wlac and APs are connected is playing the role of dhcp server used by APs as there is a dhcp pool configured. please advise. will the command be
option 43 hex (f104xxxxxxxxxxxx) f104 adding to it the management ip address of the wlac in hexadecimal.
if the ip address is 192.168.10.5 then the command will be
option 43 hex f104c0a80a05
please correct me if i am wrong!!!!

How to configure website address to http request

hi
How to configure website address to http request
(I want access JBOSS URL: http://localhost:8080/HIS/Login using website like www.HIS.com)
Please help me.

What I'm trying to do is connect my laptops built in wifi adapter to my home network and connect my usb wifi adapter to my phones hotspot then combine the bandwidth into one stream so that my speed is faster.

How do I configure my AirPort Extreme as a wireless access point? My cable modem goes to a router, and one of those ports goes to my AirPortExtreme.

I am about to hook up my airport extreme. My cable modem goes into a router, and one of those ports will supply my airport extreme. I was told by the Apple Store that I would need to configure my airport extreme as a wirreless access point. How do I do this?

With sbcgobal I got a Gateway 2wire modem. What I would like to know is how do I set up my APE as remote?
Unfortunately, you won't be able to do this as few non-AirPort routers will work with AirPorts in a Wireless Distribution System (WDS).

How to configura multiple ldap server to the sun access manager

Hi,
please help how to configure multiple ldap server to the sun access manager, for example access manager does't find the user in ldap1 then it should search in ldap2.
Thanks
Mouli

There�s no need for deleting the default amSDK based datastore because it�s needed for some default accounts.
You may try to create the datastore using the commandline (amadmin)
Have a look /etc/opt/SUNWam/config/xml/idRepoService.xml
You may also try to create amadmin account in the external ldap directory.
(Un)fortunately i�ve never tried to remove the default datastore.
-Bernhard

How to set up the Time Capsule as an access point

Hi there,
I have home office and am having wifi-connectivity issues due to the layout of my home.
I'm getting the electrician to set up ethernet outlets in various rooms in my house so that I can get wired connections in several rooms. What I want to do is connect my Time Capsule to one of those ethernet ports (see the diagram below) so that I can still broadcast a wi-fi signal in my house while having wired connections elsewhere.
|->
Lan Port 1
Home Office (Laptop)
|
|->
Lan Port 2
Living Room (TV)
Modem
->
Wired Router
|
|->
Lan Port 3
2nd Bedroom (Xbox)
|
|->
Lan Port 4
Dining Room (Time Capsule)
In my research in how to set this up, I've come across documentation that shows how to convert an old Netgear/Linksys wifi router to an access point. Here's an example of the documentation I've run across: http://www.smallnetbuilder.com/wireless/wireless-basics/30338-how-to-convert-a-w ireless-router-into-an-access-point. What I haven't encountered is how to do this with a Time Capsule.
Here are my questions:
Do I just follow these instructions and substitute "Time Capsule" where the author references "AP"?
I currently have my network set up through the Time Capsule. Here are some of the things that I currently have set up and corresponding questions:
all computers can access the printer via wifi - under the above setup, will all computers (connected to the new network via wired OR wireless access) still have access to the printer?
I have my macbook set up as a media center for my xbox and PS3. The Xbox and PS3 connect to my macbook and access the movie files that I have saved on my Time Capsule and a 2nd HDD that is connected to the Time Capsule via USB - under the above setup, will I still be able to access those movies with my PS3 and Xbox via the macbook media center software?
Thanks a ton for any help or advice. It's much appreciated.

Excellent.. great to see people doing the job properly and wiring ethernet.
Here are my questions:
Do I just follow these instructions and substitute "Time Capsule" where the author references "AP"?
Apple system is slightly different.. although the AP method would work the TC has a programmed state for placing it in AP mode.
And Apple even documented it.
http://support.apple.com/kb/HT4260
The difference in your system, is you are not using an Apple primary router (I presume) but otherwise the same.
Any router setup as WAP, you bridge the router part.. and you use Same wireless name.. same security setting (WPA2 Personal is WPA2 AES and the only one suitable). Same passkey..
I would add one difference to the apple insstructions.. they depend on auto wireless channels working. IMHO, auto anything in wireless is akin to voodoo black arts and has more to do with beads and rattles than science. It works fine in some case.. terrible in others.. lock it down. Set the wireless yourself.. at 2.4ghz there are only 3 non overlapping channels.. 1, 6, 11 .. if you use 300mbit N on the main router, it will use 2 of those channels.. choose the third for the TC.
Of course the TC can also use 5ghz.. and I lock it down as well but that is more my control freak nature.. and strong skeptism of anything auto in the wireless world.
I currently have my network set up through the Time Capsule. Here are some of the things that I currently have set up and corresponding questions:
all computers can access the printer via wifi - under the above setup, will all computers (connected to the new network via wired OR wireless access) still have access to the printer?
I have my macbook set up as a media center for my xbox and PS3. The Xbox and PS3 connect to my macbook and access the movie files that I have saved on my Time Capsule and a 2nd HDD that is connected to the Time Capsule via USB - under the above setup, will I still be able to access those movies with my PS3 and Xbox via the macbook media center software?
Your number auto changed.. fun isn't it when i edit it shows correctly but when I post it changes the format.
On the new setup the printer will still be available to all clients .. whether wireless or wired.
And to second part, yes, all file access is not going to change.. well I don't predict any.. IP of the system might change around but overall you are creating a single flat network. And that will work fine.

How to configure IP address and hostname?

May I know any method to configure IP address and Hostname? besides change it from /etc/hosts and /etc/inet/hosts.
any other method?
Any command to change?

May I know any method to configure IP address and
Hostname? besides change it from /etc/hosts and
/etc/inet/hosts.
any other method?
Any command to change?Yes, to do it temperiorly you can use ifconfig command, but after the reboot, these things will go off.
The syntax is:
ifconfig <interface> <ip addr> netmask <input based on your nwt> broadcast <> up.
ex:
ifconfig ce3 180.144.67.40 netmask 255.255.0.0 broadcast 180.144.255 255
HTH,
Prabu.S

How to Configure OIM 9.1 for Request-Based Provisioning

Hi experts,
I am new to OIM and need to know how to configure request based provisioning. Here is the scenario.
My environment has two target systems (Sun LDAP and Novell EDirectory) configured for provisioning to OIM 9.1
A user should be able to login, request either or both (SUN LDAP and EDir) for self or others.
Now the request should go to an admin for approval.
Once approved, the requested accounts should be created on the target systems.
Please guide me on the procedure to be followed.
Many thanks in advance

You will have to download the standard out of box connector for these target systems & will have to import it through the Deployment manager into OIM. Then you will have to create the Process definition of approval type & attach it to the same resource object. Please read the belo link before implementing any thing. This will provide you a better idea.
http://download.oracle.com/docs/cd/E10391_01/doc.910/e10363.pdf

How to configure OraMTS to allow WCF using MSDTC access OracleDB On unix?

How to configure OraMTS to allow WCF using distributed transactions to access the ORACLE database On Linux/Unix ?
Env:
1. DB-tier node , ORACLE database (version: 11.2.0.1.0) on Redhat Linux server ;
2. middle-tier node ,Both the client, the MS DTC and Oracle MTS run on the same computer , Win7 x64 OS , installed .Netframework 4.0, ODP.net (ODAC112030), and configure the component services in a distributed transaction;
Has done the configuration:
1. ORACLE database on a Linux server (version: 11.2.0.1.0) has execute oramtsadmin.sql script;
2.ORACLE database on a Linux server (version: 11.2.0.1.0) has execute the following script, Creating an Access Control List (ACL);
BEGIN
-- Create the new ACL, naming it "OraMTSadmin.xml", with a description.
-- This provides the OraMTS administrative user e.g. MTSADMIN user FOO
-- the privilege to connect
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('OraMTSadmin.xml',
'Allow usage to the UTL network packages',
'ORAMTS', TRUE, 'connect');
-- Now grant privilege to resolve DNS names to the OraMTS administrative user
DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE('OraMTSadmin.xml' ,
'ORAMTS', TRUE,'resolve');
-- Specify which hosts this ACL applies to, in this case we are allowing
-- access to all hosts. if one knew the list of all Windows middle-tier,
-- these could be added one by one.
DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL('OraMTSadmin.xml','*');
END;
3. ORACLE database on a Linux server has set JOB_QUEUE_PROCESSES = 1000;
4. restart Oralce;
5.Test code as follows :
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using JetSun.Infrastructure;
using Microsoft.VisualStudio.TestTools.UnitTesting;
using JetSun.Infrastructure.ServiceModel;
using JetSun.DataModel.Cis;
using JetSun.TestFramework;
using System.IO;
using System.Data.EntityClient;
using System.Data.Objects;
using ConsoleApplicationTest;
using System.Transactions;
namespace Core.Tests
[TestClass]
public class EfOracleTest
public TestContext TestContext { get; set; }
[TestMethod]
public void GetEntities()
//string cn = "DATA SOURCE=HIS30;DBA PRIVILEGE=SYSDBA;PASSWORD=jetsun;PERSIST SECURITY INFO=True;USER ID=SYS;enlist=true";
string cn = "DATA SOURCE=HIS30;DBA PRIVILEGE=SYSDBA;PASSWORD=mtssys;PERSIST SECURITY INFO=True;USER ID=mtssys;enlist=true";
DbsSetting s = new DbsSetting(Dbs.IP, DbsProvider.Oracle, cn);
Runtime.SetDeploymentDir(TestContext.TestDeploymentDir);
File.Copy("E:\\VSTS\\MedicalHealth\\bin\\Debug\\DataModel.Cis.Oracle.dll", Path.Combine(TestContext.TestDeploymentDir, "DataModel.Cis.Oracle.dll"));
//File.Copy(@"E:\VSTS\MedicalHealth\DataModel\Oracle\DataModel.Cis\EdmDiagnose.csdl", Path.Combine(TestContext.TestDeploymentDir, "EdmDiagnose.csdl"));
//File.Copy(@"E:\VSTS\MedicalHealth\DataModel\Oracle\DataModel.Cis\EdmDiagnose.ssdl", Path.Combine(TestContext.TestDeploymentDir, "EdmDiagnose.ssdl"));
//File.Copy(@"E:\VSTS\MedicalHealth\DataModel\Oracle\DataModel.Cis\EdmDiagnose.msl", Path.Combine(TestContext.TestDeploymentDir, "EdmDiagnose.msl"));
File.Copy(@"D:\vsts_test\ConsoleApplicationTest\ConsoleApplicationTest\bin\Debug\Model1.csdl", Path.Combine(TestContext.TestDeploymentDir, "Model1.csdl"));
File.Copy(@"D:\vsts_test\ConsoleApplicationTest\ConsoleApplicationTest\bin\Debug\Model1.ssdl", Path.Combine(TestContext.TestDeploymentDir, "Model1.ssdl"));
File.Copy(@"D:\vsts_test\ConsoleApplicationTest\ConsoleApplicationTest\bin\Debug\Model1.msl", Path.Combine(TestContext.TestDeploymentDir, "Model1.msl"));
string connectionString = s.ToEdmConnectionString(typeof(EdmEncounter), false);
//// Initialize the EntityConnectionStringBuilder.
//EntityConnectionStringBuilder entityBuilder =
// new EntityConnectionStringBuilder();
////Set the provider name.
//entityBuilder.Provider = s.Provider.Provider;
//// Set the provider-specific connection string.
//entityBuilder.ProviderConnectionString = cn;
//// Set the Metadata location.
//entityBuilder.Metadata = string.Format(@"res://{0}/EdmDiagnose.csdl|res://{0}/EdmDiagnose.ssdl|res://{0}/EdmDiagnose.msl", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
//entityBuilder.Metadata = string.Format(@".\Model1.csdl|.\Model1.ssdl|.\Model1.msl", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
//connectionString = entityBuilder.ToString();
////using (Entities edm = new Entities(connectionString))
//// foreach (var item in edm.ENCOUNTERs.Take(10))
//// Console.WriteLine("{0}\t{1}", item.ENCOUNTERID, item.DISPLAYNAME);
//entityBuilder.Metadata = string.Format(@"res://*/EdmDiagnose.csdl|.\EdmDiagnose.ssdl|.\EdmDiagnose.msl", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
//entityBuilder.Metadata = string.Format(@"res://{0}/", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
connectionString = s.ToEdmConnectionString(typeof(EdmFeeInfo), false);
try
//using (TransactionScope tx = new TransactionScope())
using (TransactionScope scope = new TransactionScope(TransactionScopeOption.Required, new TimeSpan(0, 0, 30)))
//using (var dbcn = s.Provider.CreateConnect(connectionString))
using (EdmFeeInfo edm = new EdmFeeInfo(connectionString))
//edm.Connection.CheckOpen();
//using (edm.Connection.BeginTransaction())
foreach (var item in edm.FeeInfos.Take(100))
TestContext.WriteLine("{0}\t{1}", item.EncounterId, item.Amount);
item.Amount = item.Amount * -1;
edm.SaveChanges();
// using (EdmFeeInfo edm2 = new EdmFeeInfo(connectionString))
// edm2.Connection.CheckOpen();
// edm2.Connection.EnlistTransaction(Transaction.Current);
// foreach (var item in edm2.FeeInfos.Take(100))
// item.Amount = item.Amount * -1;
// edm2.SaveChanges();
// throw new NotImplementedException();
TestContext.WriteLine("-----------1---------------");
using (EdmFeeInfo edm = new EdmFeeInfo(connectionString))
foreach (var item in edm.FeeInfos.Take(100))
TestContext.WriteLine("{0}\t{1}", item.EncounterId, item.Amount);
throw new NotImplementedException();
catch (Exception ex)
TestContext.WriteLine((ex.InnerException ?? ex).Message);
TestContext.WriteLine("-------------2-------------");
using (EdmFeeInfo edm = new EdmFeeInfo(connectionString))
foreach (var item in edm.FeeInfos.Take(100))
TestContext.WriteLine("{0}\t{1}", item.EncounterId, item.Amount);
6. the test results are as follows:
4 125
4 835.45
4 3458
4 2350
4 200
4 100
4 300
4 123
4 234
无法列入分布式事务处理（Could not be included in the Distributed Transaction）
-------------2-------------
4 125
4 835.45
4 3458
4 2350
4 200
4 100
4 300
4 123
The main error message:无法列入分布式事务处理（Could not be included in the Distributed Transaction） , not use distributed transaction everything is normal.
My test environment MS DTC and Oracle MTS Recovery Service run on the same computer, but OracleMTSRecoveryService registry values under£º HKEY_LOCAL_MACHINE \ SOFTWARE \ Wow6432Node \ ORACLE \ OracleMTSRecoveryService ,not under HKEY_LOCAL_MACHINE \ SOFTWARE \ ORACLE,I do not know that there is no relationship.
Is not configured incorrectly?Who can help me, thank you very much!

Do you really have a requirement to push data from Oracle to Access rather than pulling data from Oracle to Access? It would be exceptionally unusual to push data from Oracle to Access.
Pushing from Oracle to Access would means that you want some Oracle process running that is updating Access. But you said that your Access database was on your "local desktop" which implies that it is not running on a server where it is always available. So that means that the Oracle process is going to regularly encounter (and report) errors because the Access database is not available. In turn, that's going to mean that your push process is either going to cause the underlying transaction to fail or it's going to mean that the push process is going to have to implement a fair amount of code to queue data to be pushed at a later date (and track all those changes) which is no small task. None of that seems particularly pleasant.
On the other hand, Access is designed to pull data from real relational databases like Oracle. That's the far more normal approach architecturally. It doesn't require an Oracle process, it doesn't generate errors on the Oracle database when the local desktop is down, etc.
And, of course, I'm assuming that introducing Access is even architecturally reasonable. Most organizations would be extremely hesitant to allow data from an Oracle database to get moved into Access because that quickly means that they lose control of the data from a security standpoint, that there are now multiple copies of the data floating around when changes & corrections are made, etc. That causes all sorts of headaches normally above and beyond the headaches that pushing from Oracle to Access would create.
Justin

How to configure iMac and Airport Extreme for remote access?

I want to view videos stored in iTunes on my iMac remotely over the Internet when I away from my home network. My home network setup includes AirPort Extreme with Comcast High Speed Internet Service (16Mbs/6Mbps). I use AirPlayit to support the iMac as a server and have the iPad 3 and iPhone 4 apps for AirPlayit. I have no problem viewing my videos over my home network on any of my mobile devices but for some reason I am unable to configure my firewall so that I can access my iMac remotely when I am away.

Turning off the wireless on the TP-Link router does not make it a simple modem.
You need to configure the AirPort Extreme in Bridge Mode to operate correctly with another router on the network.
Open AirPort Utility and click on the AirPort Extreme icon, then click Edit
Click the Network tab a the top of the window
Make sure that the setting for Router Mode is "Off (Bridge Mode)"
Click Update to save the new settings
Wait 30 seconds for a green light on the AirPort Extreme, then power off the complete network....all devices....in any order you want.
Wait a minute, then start the TP-Link modem/router first and let it run a full minute
Start the AirPort Extreme next the same way
Keep starting devices one at at a time the same way until the entire network is back up.

Configure my router to be just an access point.

I have a WRT54GL router which I would like to use as an access point. How do I configure it to work as an access point?

Give the wireless router an IP address within the subnet of your network and disable DHCP on it; you should then be able to use it just as a Wireless Access Point.
For example, router #1 (main router) has an IP address of 192.168.1.1. Router #2 (designated Access Point) needs to be configured to have an IP address of 192.168.1.2. Disable the DHCP server on Router #2, as DHCP addressing will be handled on Router #1. Router #2 is now a wireless access point.

Permit mac-address only port 80 on access-point 1240

Hi,
how can I permit forward an mac-address which connect at access-point only
surf in Internet ?
Does anyone advice me an a configurations or document about ?
Best regards
Lorenzo

hiiiii...
permit

How do I use Airport Extreme to create wired access point on wireless network?

Bit of an odd situation. I just went from cable to DSL at home and the modem moved from right by my computer to upstairs.
Trouble is, there's no real easy way to get a cable from the modem upstairs to my X-box (sans wireless connector) downstairs.
I could buy the wireless adaptor for the X-Box, but I was hoping I wouldn't have to spend any more money.
I have my airport extreme, and I was hoping I could use it to create a wired access point on the network, recieving the signal from the wireless modem upstairs and allowing me to plug in the X-Box.
Is this possible? If so, how? I've been through the config panel about a dozen times, but can't figure out what combination to set up.
Thanks.

Will it work if I use the express to create the network?
Yes, providing that you have an 802.11n version of the AirPort Express and the Express has been configured to "Allow this network to be extended".
Then, the AirPort Extreme can be configured to "extend" the Express network. When you do this, the AirPort Extreme will provide more wireless coverage and the LAN Ethernet ports are enabled, so you can connect an Ethernet device.
This will not be a "normal" Ethernet connection. It will only work as well as the wireless "hop" between the Express and Extreme allow.
For best results and performance, a wired connection through the hole in the wall is always best. If you decide to do this, you will need the "new" AirPort Express with both a WAN and LAN port on the device. But, you could try wireless first to see if it will meet your goals before you reach for the tools.

How to configure IP Address filter in Controller based Access Points ?

Similar Messages

Maybe you are looking for