How to configure Ip address if unable to login error is occur through Hyper

I am a new user of sun Solaris 10 . In my sun fire v490 server every thing is configured fine there is no fault in booting .But when I configured the file /etc/inet/hosts in solaris 10 and missed to configure the file /etc/inet/netmask and /etc/inet/ipnodes, due to which server is not allow me to login there is an error occur " unable to login" . Now what is the other way to login into server console. I am entering in the console using normal mode, should I try to login in using diagnostic mode., or is there any other way to login into and modify the file. I also need training videos of solaris configuration .
Help in this regard will be highly appreciable.

you should try to boot in single mode
1) start server, when boot process begins (after memory checks), do a STOP + A on the Sun keyboard. you should be on prompt "Ok" (OBP)
2) on Ok prompt, type : "boot -s"
and tell us what happened.

Similar Messages

How to configure website address to http request

hi
How to configure website address to http request
(I want access JBOSS URL: http://localhost:8080/HIS/Login using website like www.HIS.com)
Please help me.

What I'm trying to do is connect my laptops built in wifi adapter to my home network and connect my usb wifi adapter to my phones hotspot then combine the bandwidth into one stream so that my speed is faster.

How to configure IP address and hostname?

May I know any method to configure IP address and Hostname? besides change it from /etc/hosts and /etc/inet/hosts.
any other method?
Any command to change?

May I know any method to configure IP address and
Hostname? besides change it from /etc/hosts and
/etc/inet/hosts.
any other method?
Any command to change?Yes, to do it temperiorly you can use ifconfig command, but after the reboot, these things will go off.
The syntax is:
ifconfig <interface> <ip addr> netmask <input based on your nwt> broadcast <> up.
ex:
ifconfig ce3 180.144.67.40 netmask 255.255.0.0 broadcast 180.144.255 255
HTH,
Prabu.S

C5 - 'unable to login' error when trying to synchr...

hello all.
I own a nokia C5 and I have encountered the following problem: I get the error 'unable to login. try again' when I am trying to retrieve my emails from a gmail and an yahoo account.
I want to mention that I already have a first gmail account working just fine on this phone, and the error above appears after I configured a second one. the same thing happens to a yahoo account.
needless to say that the data connection to my internet service provider is up&running.
can you help me with some tips and tricks to solve this?
thank you.

are you using predictive text when signing in?
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Unable to login to Switch & Router through secondary Acs ,when primary ACS is down.

Dear All,
i have configured primary ACS in DC data center and secondary ACS in DR data center, i have configured replication , and it is working well, but when we put down primary ACS , we are unable to login in switch and router through secondary ACS , i ahve dedicated link between core dc sw to core dr sw through which all traffic is getting replicated . All user , mgmt vlan are created in FWSM firewall.Kindly help.
Regards
Amit Kulshrestha

Hi Bro
I'm assuming you've configured your ACS correctly and the Cisco network devices correctly. Perhaps, this could be a bug. The reason I say this is because last week, I was implementing 2 units of Cisco ACS 1121 v5.3 (in HA mode) for a client, and i had similar issues myself. When I down the primary ACS, I'm unable to login to my network devices, eventhough my secondary ACS is UP and PINGable from all network devices.
Hence, I downloaded and applied the latest cummulative patch from the CCO website 5-3-0-40-4.tar.gpg (Release Date: 27/May/2012) and my problem solved.
Perhaps, your ACS version isn't 5.3, but the morale of the story here is, maybe patching is required for your case!!
Please do let me know the outcome. May the force be with you, bro!

Unable to login to Web console through xelsysadm.

Hi All,
I am unable to login to the web console through xelsysadm.It doesn't show any error message, but the process bar goes on for some time and then shows the session is expired. I have a delegated admin with 5 users.
The users present in this group are able to login with in second span of time.But Xelsysadm is unable to login.
Can any one help me on this.
Thanks in Advance.

Both the field has a value 0 in database. when I enter the credintials and submit it, the status bar goes on for a long time and its not enterning into web console.the login page appears for long period with status bar progressing and it even stay in that state for 24hrs with out logging in.
But wen I use delegate admin, he is able to login with in seconds of time.

How to configure IP address for FTA (Nova's nFusion) PVR IP recording...

Greetings Peers,
I just got my Time Capsule (TC) yesterday and absolutely have very limited experience with Airport Utility or networking - that said I somehow figured out how to setup a new secured wireless network and it is up & running!
I'm testing this absolute great Free-to-Air (FTA) satellite receiver called *Nova nFusion* where there is a functionality option to record your personal video (PVR) on a IP address.
Here's my dilemma, I have tried punching in IP address from what AirPort Utility (AU) displays for Time Capsule (TC) several times but receiver *would fail* to record anything!
I have tried to tweak general settings like enabling sharing in the manual setup for TC under AU but like I said I'm not an expert and it didn't work.
Wondering:
1) If anyone has success setting up similar PVR over IP?
2) Is this even feasible? Honestly, I don't see why not? Cause I'm also planning to have move my iTunes library folder on TC so I could access it from my Mac Mini, iBook, AppleTV, etc. etc.
I have high hopes specially since I care less and actually do not want to utilize Time Machine feature at all! I'm sure you geniuses have already figured this out. Please HELP!!!
Any feedback would be greatly appreciated-
Cheers!

Tapori wrote:
I've been trying the IP address which shows up on the welcome screen of AirPort Utility but that could be very much TC's Router Address cause it's showing up in AirPort Utility?
How can I acquire IP address for TC's language 1TB Hard Drive? It can't be this difficult!
well, as i'm digging deeper, finding the ip address isn't the issue, it's getting your software to record to it, maybe a permissions issue?
is this open source? can i check it out and see if i can help you this way? if i can get my hands on it i'm pretty sure i'd be more help. if the software just needs an ip address, you got it... so there's another issue. it's in your internal network right? so internal ip's should be fine, no need to port forward...
just brainstorming out loud.
Good suggestion but how do you assign a static IP to a Mac Mini which is on the same network (both wiredly and wirelessly connected to TC)?
open network prefs, select your ethernet connection, configure: using dhcp with manual address, enter ip address (even if it's the same as your DHCP address, this simply assigns it permantly), click apply.
if you wanted to do this over the wireless network you'd choose the airport from the left, advanced, tcp/ip tab, configure IPv4: using dhcp with manual address, enter ip address (even if it's the same as your DHCP address, this simply assigns it permantly), configure IPv6: automatically, click apply.
the ethernet connection would have a different IP than your wireless connection to give you the option to switch back and forth while maintaining assigned connectivity elsewhere in your network (ie. pvr ip recording).
i'm just curious what permissions the pvr ip recorder would have, and where exactly it would record to... (as in which folder... as what user?)
Message was edited by: BKRonline

How to configure IP address thrugh web.xml doubts

Hello there
I want to configure my web application. How can i initialise the IP Address and ports through web.xml file?
thanks!

ashish.251985 wrote:
I want to configure my web application. How can i initialise the IP Address and ports through web.xml file?You cannot do that in the web.xml.
At least the port can be configured in one of the configuration files in the /conf directory of the application server. The exact details and procedure depends on the application server implementation. Read its documentations.

How to configure IP Address filter in Controller based Access Points ?

Dear Team,
Configuration:
i have 5508 series controller and joined the two Thin APs to the controller. WLAN controller is connected to PC where Multicast receiver is running for two Multicast IP addresses (IP1: 230.1.1.1, IP2: 230.1.1.2). Multicast sender is running for two IP addresses on Station.
Requirement:
When Station is associated to AP1, AP1 should block the multicast packets going to AP2 and vice versa . That is AP1 should be configured to block multicast packets going to 230.1.1.2 and AP2 should be configured to block multicast packets going to 230.1.1.1.
Thanks,
Harsha

I believe you could apply ACLs and check if that helps.
For more details about configuring ACLs, please refer to the following link:
http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-0/configuration-guide/b_cg80/b_cg80_chapter_0110101.html#task_AA3AFA57D51647478E0C3511137C165E
Hope that helps.

How to configure Ip address on CP-7961G

Dear All Expert,
Could you let me know How can i change ip address or every thing on CP-7961G?
Note: CP-7961G i connect to Cisco witch 3560.
Best Regards,

Take a look at the following link.
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7961g_7961g-ge_7941g_7941g-ge/4_2_3/english/administration/guide/7961net.html#wp1031235
Hope this helps. If so, please rate the post.
Brandon

How to Configure Invoice Address tab on Purchase Order - Header Level

Hi Gurus
Please assist
My client want to add the Invoice address on the Purchase Order level Tab, it must be automatically pull through to all the Purchase Orders as they have one Invoicing address.
Currently the suppliers send invoices to plants instead of HEAD OFFICE for payment
Regards
Susan

Hi,
Tax condtions shd be given by functional consultants.ABAPers cant decide the tax condtions.
you can have these condtions in KONV table.
In item level vbrp-posnr = konv-kposn.
ekpo-ebelp = konv-kposn
at header level as said in the below thread
Just see this and get back if any concerns
Regards
Edited by: Rasheed salman on Dec 2, 2008 6:20 AM
Edited by: Rasheed salman on Dec 2, 2008 6:22 AM

How to identify which address is causing a sync error?

I'm getting the classic:
BlackBerry Desktop Manager displayed an error "Error code - 0x80043ac9. Check documentation" when synchronizing either the calendar appointment contact anniversary or contact birthday with a start date prior to the year 1900
I've got a bad address entry date some where. I've been through all the 'create tif.log and PtTrace.log' process, but there's nothing in those files I can see that identify the offending record. Just the last record that was processed successfully.
Is there ANYWHERE I can find which record has the offending date?
Any help is sincerely appreciated...
Jeff...

What's the full error message you're getting? When you use one of the
built-in calculation options (ie not the custom calculation script), it
sometimes doesn't print out the name of the field that triggered the
calculation, or even the name of the field that couldn't be find, and then
it's a real pain in the neck finding out which one is causing the
problem... In that case the best option is to think which fields were using
the field you deleted/renamed, and then try to fix them and see if the
error goes away.

How come I keep getting the unable to download error every time I try to download an app

Every time I try to download an app it will look like its downloading but it will say unable to download app at this time what do I do

Morning Chris 1012,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/ts1702
Hope this helps,
Mario

Unable to login error message. won't let me use efax for past 2 weeks.

called efax they said it was an hp problem. downloaded all updates. uninstalled and reinstalled printer(envy114). still same error message.

Hi @mcaldwell,
Welcome to the HP Support Forums. I see that you are encountering difficulties when trying to use the eFax feature of your Envy 114 printer.
I have included a link to a post by @PrintApper titled eFax users - please read. If you prefer to speak to someone, please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

How can I fixed an app that says An Error Has Occurred and it does not reinstall because the download was damaged?

I don't know why but I can't download Borderlands GOTY. I tried and it says this product is damaged please reinstall borderlands GOTY. I tried once again and it said the same thing. Then I tried a third time and now it won't install. It just says reinstall app in the Purchases list.

Restore it with a TimeMachine backup if you have used it previously.
If not delete all references to it, empty the trash, clear browser history, try a different browser.
Maybe try a faster internet connection to successfully download.

How to configure Ip address if unable to login error is occur through Hyper

Similar Messages

Maybe you are looking for