How to configure IPv6 DHCP on Windows Server 2012?

I see LOTS of help and what to do for IPv4, but it's a ghost town for IPv6 DHCP configuration? Hardly anything on youtube etc that shows this simply. Lots of complicated unrelated IPv6 stuff though.
Seems many here as best practice set up server to handle DHCP. Not router or firewall. So how are you setting up IPv6 on the server?
Anyone have any tutorials or simple step by step help how to properly configure DHCPv6 on server?
Currently the router is handling DHCP. I want to use Active Directory. I know its best to have server handle DHCP, but will AD work just fine with router doing both ipv4 and ipv6 dhcp and for simplicity and wireless? Small 5 user office.
Thank you.
This topic first appeared in the Spiceworks Community

Similar Messages

Need assistance how to configure RDS on a standalone Server 2012 R2 not joined to a domain

Hi,
I need help on how to configure RDS on my standalone server 2012 R2 that is not joined to a domain. I would also like to see the counterpart of Terminal Services Manager.
I am familiar with Terminal Services on my old Server 2003 which I migrating.
Thank you for your assistance.
Sincerely,
Ramon

Hi,
the dedicated RDS/TS forum is here:
http://social.technet.microsoft.com/Forums/en-US/home?forum=winserverTS
Some useful articles, which seem to answer your questions:
http://support.microsoft.com/kb/2833839
http://ryanmangansitblog.com/2013/10/30/deploying-a-rdsh-server-in-a-workgroup-rds-2012-r2/
http://support.risualblogs.com/blog/2014/03/10/setting-up-a-2012-r2-rds-gateway-for-a-workgroup/
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How to install device cals on Windows Server 2012 standard edition

Hello i have a windows server 2012 standard edition licence that i have taken on rent from an ISP.
i have created a domain controller on that.
By default only two users can use remote desktop to the server simultaneously.
My Requirement is 20 users can use remote desktop to the server at the same time.For that i have purchased 20 Delive CALs licences like volume licencing.
i have the licence number noted on the paper.
do i need to install remote desktop services first etc ?
Could anyone guide me step by step how can i install or configure so that 20 users can use remote desktop on the same time.

Hi,
Any update about the issue?
I would agree with others, you need to install Remote Desktop Services Client Access Licenses.
There are three methods by which you can install Remote Desktop Services client access licenses (RDS CALs) onto your license server:
• Install Remote Desktop Services Client Access Licenses Automatically
• Install Remote Desktop Services Client Access Licenses by Using a Web Browser
• Install Remote Desktop Services Client Access Licenses by Using the Telephone
https://technet.microsoft.com/en-us/library/cc725890.aspx?f=255&MSPPError=-2147217396
Then you can install both Per User and Per Device CALs onto the same license server.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to install Sticky Notes in Windows Server 2012 R2

I want to install Sticky Note in Windows Server 2012 R2. If this app is not available in Server 2012 then which is the
best "Sticky Note" application for this platform.
Thanks

Here are instructions for 2008 -
http://www.win2008r2workstation.com/sticky-notes/ I'm not sure about the legality of that, as I think Microsoft has some rules in their license about copying files from one distribution to another. You would need a lawyer to check on that.
Otherwise, a simple Bing search will turn up freeware apps you can download.
.:|:.:|:. tim

How to apply hotfix 3000847 to Windows Server 2012 & BizTalk Server 2013 R2

Hi
I have a environment get the same issue as:
http://support.microsoft.com/en-us/kb/3000847. But this hotfix can't be used in my environment.
The environment information:
We are using Windows Server 2012 Standard, BizTalk Server 2013 R2 Enterprise Edition. And the Version of Microsoft Enterprise Single Sign-On is 9.0.2096. It's the same as the article.
Here is the article content:
Prerequisites
To apply this hotfix, you must have Enterprise Single Sign-On V5 (9.0.2096) installed.
Best regards,
Glen Qu (Fareast\v-zuqu)

Have you tried installing it? Are you getting any error?
Ideally you should not face any issue while installing this hotfix.
Pre-requisites-
1) User account should be member BizTalk Server Administrators Group and have SydAdmin privileges on SQL Server
2) Stop all the host instances
3) Stop SQL Agent
4) Stop App Pools if any webservices is posting messages in BizTalk
Please refer the below article Information about BizTalk hotfixes and Cumulative Update support(Uninstall and rollback if required).
http://support.microsoft.com/kb/2003907
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

How to configure ipsec policy on windows server 2008 r2 to permit local machine only access to gateway,one other server and it's local ip?

I have applied IPsec policy on local machine(ip address:10.82.138.76) with windows server 2008 ent r2 installed,only permit local machine to comunicate with itself,one other server(ip address:10.82.138.77) and the gateway device(ip address:10.82.138.1).After
i asigned this policy,i can ping the gateway (ip address:10.82.138.1),and the other server(ip address:10.82.138.77),but i can't ping local machine itself(ip address:10.82.138.76),could anybody tell me why and how to solve this problem?When i applied the same
policy to windows server 2003 ent,i can ping the local machine ip address.

Hi,
Thanks for your post.
First, try to ping the loopback address 127.0.0.1. If the loopback test succeeds but you cannot ping the local IP address, please post the unedited
ipconfig /all and route print of the problematic computer.
For test purpose, you may refer to the following lab step by step guide to deployment Tunnel Mode IPsec. Hope it helps.
Windows Firewall and IPsec Policy Deployment Step-by-Step Guide
http://technet.microsoft.com/en-us/library/cc732400(v=ws.10)
Connection Security and IPsec
http://technet.microsoft.com/en-us/library/cc771593(v=ws.10).aspx
Connection Security Rule Wizard: Tunnel Endpoints Page - Client-to-Gateway
http://technet.microsoft.com/en-us/library/dd759083
Best Regards,
Aiden
Aiden Cao
TechNet Community Support

How to setup the DirectAccess on windows server 2012 r2 essentials with 2 nics

I have a server with two network cards (the first card NIC called "Internet" and the second NIC called "Local Network") with static IP both.
The computer has "DomainName.local"
I still have not connected to the internet with my company domain-name from my server
I have installed and configured the DHCP, DNS, WINS, and trouble-free operation
I have also installed the role "DirectAccess and VPN"
But here we face the problem that I can not set the directaccess with two Network Interface Card
Any information found on pages from microsoft none met my needs
Can you help, set the DirectAccess with my server ?

Hi:
Remove/disable the "internet" nic and connect the server and all stations to a switch. Connect the switch to the router/firewall at the edge. Server stopped doing NAT after 2003.
Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit.

How to make a storage on windows server 2012?

Hello,
I've got a domain running with some users joined to it. every user got it's own storage already of 250gb.
The only thing left to do is making a global storage, just 1 storage of 250 gb that every user can access and i need it to be shown in "This Computer".
Can someone help me?
Thanks in advance,
Marc.

Hello Marc,
Do you mean than you want everyone have their own personal share folder? And need to limit the folder size?
I think you can use the FTP server function in Windows server.
About FTP, it is recommended to ask in the Windows server forum, the professionals there will be glad to help you.
https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverfiles
Thanks for your understanding.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

How do i install mysql on windows server 2012 r2 using powershell(automate)??

i have a requirement of installing the mysql server with one click deployment using power shell by passing the parameters needed into the mysql console. can i achieve that ?
can anyone help me in doing that?
thanks in advance.
Suresh Gaddam

Hi Suresh,
This forum is for SCOM related questions, it seems like that you are asking for powershell script to install Mysql. From my point of view, I don't think that using powershell to install Mysql is an easy way, as it is hard to say whether Powershell can get
information from Mysql install console with some API.
In addition, for further assistance, please contact MySQL forum and Powershell forum.
Thanks for your understanding!
Regards,
Yan Li
Regards, Yan Li

How to install SharePoint server 2013 in windows server 2012 R2

Hi,
I have SharePoint server 2013, and I want to install it on windows server 2012 R2 version.
Can you guide me on how to install it?,
or you if you got the download link of the full product of the latest release of SharePoint 2013 with sp1, please give me.
thanks in advance.

Hi,
Now I could install SP 2013 following this article
http://iouchkov.wordpress.com/2013/10/19/how-to-install-sharepoint-2013-on-windows-server-2012-r2/
I realized installing prerequisites software manually wont let Sharepoint 2013 to be installed in Windows 2012 r2 because of some issues, but with the use of power shell I could.
Thanks everyone.

WSUS server role on Windows Server 2012 R2 - Supported SQL Configurations

According to
this page the supported SQL configurations for WSUS on Windows Server 2012/2012 R2 stop at SQL Server 2012 SP1, but there is no mention of SQL Server 2012 SP2 being supported.
However, both the SCCM 2012 R2
supported configuration page and this announcement state that SQL Server 2012 SP2 is fully supported on SCCM 2012 R2 with no
known limitations. Bearing in mind a big part of SCCM is to perform software updates which in turn requires WSUS to be installed...
... Is SQL Server 2012 SP2 supported on WSUS 4.0 (aka WSUS server role on Windows Server 2012 R2)?

The only thing that mattered for the versions mentioned on TechNet probably is the date the articles are published. I'm no Microsoft employee so I cannot guarantee you support even if I trace back some Microsoft article that explains the lifecycle of MS
products and support.
Fact is that MDT uses a database, SQL is a database server. SQL server has all kinds of compatibility modes to support databases dating multiple versions back.
Another fact is that a Service pack is an
update to the software (be it a large one) Microsoft will not break compatibility with their own products (and may others that relay on SQL server) by an update.
And a last fact is that in general, updates are required when you need support. After all, updates fix issues, and engineers generally don't like ghosthunting a bug that has already been patched.
MCP/MCSA/MCTS/MCITP

Migrate SBS 2003 with AD and Exchange to Windows Server 2012 Standard

We are using SBS 2003 and we have configured Exchange server and AD with DNS and DHCP. Now we are planning to move SBS 2003 to Separate servers like windows server 2012 standard AD with DNS and DHCP and Windows server 2012 Standard with Exchange
2010.
Is it Possible?? we need step by step guide.
Thanks in advance.

Hi,
You probably would not find any step by step guide for this kind of migrations. If you are not comfortable with doing such migrations I would recommend to if you need to do it your self do some test migrations. Or otherwise get help by a local IT company
that is familiar with migrations.
But to give you some information, first thing before starting a migration is check the health of your SBS 2003 server / domain. Use tools like dcdiag, netdiag and best practice analyzer. I wrote a blog post about steps to think about before you start this
might help: http://blog.ronnypot.nl/?p=914
When every thing is clean you can start adding the new windows server 2012 machines as member servers to your domain.
Next you can promote one of the servers to additional domain controller on your domain (Keep in mind SBS needs to hold all FSMO roles so moving these is the last step your should do.) Also promoting a windows server 2012 to domain controller has slightly
changed, you need to install the ADDS role and follow the wizard to promote the server to a DC.
With installation of the new DC install DNS allongsite it will automatic replicate settings during confiugration.
DHCP must be installed manual, depending on your scope and settings it might be as easy to create a new scope and disable the old dhcp server.
On the server Exchange needs to be installed, make sure you install and do all pre-requirements. Than install Exchange it will automaticly detect you already have an Exchange organization and is installed as additional server. You can configure all settings
and when everything is configured right you start moving mailboxes.
When everything is moved away from the SBS 2003 server, uninstall exchange, move the FSMO roles to the new DC and after that demote the sbs 2003 server so it is not listed anymore as an additional DC in the domain. Last would be shutdown the server and remove
all records left in AD and DNS.
There is this guide for migrating SBS 2003 to windows server 2008 R2 and Exchange 2010, this might give you some usefull information, not everything will be the same but it is a good start:
http://demazter.wordpress.com/2010/04/29/migrate-small-business-server-2003-to-exchange-2010-and-windows-2008-r2/
Regards Ronny
Visit my Blog or follow me on
Twitter

Not able to inistall Sharepoint 2013 on windows server 2012 r2

Hi ,
I am trying to install Sharepoint enterprise 2013 on windows 2012 r2. In very early stage i got issue when i ran prerequisite installer.
As we all know in this case we need to install prerequisite manually. I downloaded all the prerequisite and installed them manually. I have enabled all web and application role. then followed below link and installed all the prerequisite
http://iouchkov.wordpress.com/2013/10/19/how-to-install-sharepoint-2013-on-windows-server-2012-r2/
SQL Server 2008 R2 SP1 Native
Client
Microsoft
WCF Data Services 5.0
Microsoft Information Protection
and Control Client (MSIPC)
Microsoft Sync Framework Runtime
v1.0 SP1 (x64)
Windows
Identity Extensions
Windows
Identity Foundation (KB974405)
Windows
Server AppFabric
CU
1 for AppFabric 1.1 (KB2671763)
All got installed correctly on server validated from control panel then i restarted the server and Ran SharePoint Set up
But still facing issue attached in form of image
Please help me on this.
kirtesh

Hi kirtesh,
According to your description, my understanding is that you got an error when you ran prerequisite installer.
Please make sure the Windows Server Features and Role services are enabled in your SharePoint server.
Start > All Programs > Administrative Tools > Server Manager->Add Roles and Features:
i. Application Server
ii. File Services
iii. Web Server (IIS)
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Migrate SBS 2003 to Windows Server 2012 Standard

We currently have two servers (SBS 2003 Standard utilizing Exchange 2003; Windows Server 2003 R2 Standard with SQL 2005).
We want to retire the SBS or maybe both.
We have purchased a new server (Windows Server 2012 Standard with licenses for Exchange 2013 and SQL 2012).
Is there a whitepaper that describes how to migrate SBS 2003 to Windows Server 2012 Standard?
Is it possible to run Exchange 2013 on the Windows Server 2012 box? In Hyper-V? If Exchange can run in a virtualized instance, do we need additional licensing to run another instance of Windows Server 2012 Standard?
Can we run SQL 2012 on the same Windows Server 2012 box?
We have about 35 users.

Sal,
Migration went fine. Steps i took:
Join 2012 Standard server as member.
Migrated roles.
I ended up manually creating new shares. The old environment was a mess.
Robocopy data/verified.
Seize FSMO roles
http://support.microsoft.com/kb/255504
Metadata cleanup
http://support.microsoft.com/kb/216498
Good luck

MCSA Windows Server 2012 Certification Exam prep

I am studying for the MCSA Windows Server 2012 certification. I have looked at the books on amazon and would like your opinion on book selection. In the past I have found the self-pace exam prep books by microsoft to my liking. If you know of any
web sites that contain information on how to prepare for the MCSA Windows Server 2012 certification that would great too. I think I am going to setup a lab using Windows Server 2012 R2 machines to assist my learning so information on that topic would be great.
I am currently using Virtual Box to create virtual machines.

Hi, I always liked the exam prep book from MS with hand-on lab. There is
http://www.microsoftvirtualacademy.com/ from MS as well, could be a good place to check. I know too that @KeithMayer on twitter do post a lot of ressource too.
I will move the thread to the learning section, as maybe other users got other ressource of value.
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

How to configure IPv6 DHCP on Windows Server 2012?

Similar Messages

Maybe you are looking for