How to configure IS-H outpatients appointment booking using SAP Portal?

Hello everyone,
I just want to know if anyone has implemented On-line outpatients appointment booking using SAP Portal ?. I saw SAP for Healthcare: Supporting Enterprise-Wide Appointment Booking demostration and here in our institution we are interested on it.
If so then can anyone of you please guide? I just want an overview about this. If you have some documentation related to this then that will be more helpful.
Thanks for advanced!!
Regards
Ruben Salinas
Clinica Vitro
Mexico

Hi Ruben,
I know a few examples where such service portals have been implemented. The Thoraxklinik Heidelberg has implemented a service portal for their referrers. Some information can be found [in the SAP success story|http://download.sap.com/industries/healthcare/customers/download.epd?context=CE8BFF0B88BF13A10B64E1ECB4EC460FC2A64DA0B06CAB0012CE747672A20DF534AFB35493AC7989EB7B66D866B70FFE6C45BC0ABA7783B2] and [the SIEMENS success story|http://www.medical.siemens.com/siemens/sv_SE/cs_healthcare_cons_FBAs/files/brochures/primergy_server_thorax_clinic_heidelberg_en.pdf]. They have also been hounored by Computerworld , see [here|http://www.cwhonors.org/viewCaseStudy2008.asp?NominationID=656], where you can also find some details: a [screenshot|http://www.cwhonors.org/CaseStudy/Uploads/Thoraxklinik/Appendix1.jpg], the [security architecture|http://www.cwhonors.org/CaseStudy/Uploads/Thoraxklinik/Appendix2.jpg] and a [graphic|http://www.cwhonors.org/CaseStudy/Uploads/Thoraxklinik/Appendix3.jpg] how this portals ties into their overall HIS.
Regards
Claudius

Similar Messages

How to configure Oracle 10g Advanced Security to use SSL concurrently with

How to configure Oracle 10g Advanced Security to use SSL concurrently with database User names and passwords
In Oracle Advanced Security Documentation it is mentioned that i can use SSL concurrently with DB user names and passwords. But when i configure the client certificate on the client my DB connection is getting authenticated using the certificate, which out passing user id or password.
We want to connect to Oracle DB over SSL channel so that the data packets are not in clear text. Also we want the user to make a connection using user id and password.
Basically we want SSL with out authentication.
Need your expert advice

Read the documentation (I have given following links assuming you are running a 32 bit architecture)
Server installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14316%2Ftoc.htm&remark=portal+%28Books%29
Client installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14312%2Ftoc.htm&remark=portal+%28Books%29
You can find the required books (if not using 32 bit architecture) from
http://www.oracle.com/pls/db102/portal.portal_db?selected=3

How to configure SNMP on all managed client using SCCM 2012 SP1

hi ,
do you know How to configure SNMP on all managed client using SCCM 2012 SP1?

As a side note, I made an interesting discovery last week: the SNMP Service is deprecated in Windows Server 2012. Why would you want to use SNMP on an actual Windows OS though? There are far better ways available to monitor Windows. I'm sure that lines
up with why they deprecated it.
Jason | http://blog.configmgrftw.com

How can we report on R/3 tables using SAP BO

How can we report on R/3 tables using SAP BO.
Thanks

Hi
you can use the CR Designer and build CR reports that access your R/3 system. Another option is to use the R/3 connector for the Data Federator which is available in the Innovation Center. Still this connector is not a product rather can be used on your own risk.
Regards,
Stratos
PS: Accessing directly the tables of the underlying database(e.g oracle) using universes and Web Intelligence is not recommended. You will not be able to decode all contents of the database tables you are accessing since in some cases R/3 encodes the data before storing them in the actual database tables.

How to configure the mail in Sales Support of SAP SD

Hi,
Experts I have one scenario in my co. that we have 300 users we have to send the mails to our 300
users for every 2 or 3 months once. Regarding new promotions (Discounts , Price changes) of
company. For this every time we are changing the sold to party in quotation and taking printouts then
sending to our users its a lengthy procedure, to avoid this long time very soon we are going to
implement SAP SD Sales Suppor in our company is there any functionality in SAP to send mail at
once to our 300 users may i know about how to configure the mail for this scenario.
Thanks and Regards
MH

Hi Prashant,
Thanks for you immediate responce, Can you give me the configuration steps in detail.
Thanks and Regards,
MH

How to configure LCDS 2.5.1 make use of Flex 3.0 SDK?

Hi,
I deployed LCDS 2.5.1 version which uses Flex 2.0 by default. Now i want to use Flex 3.0 with this LCDS. How to configure it? I tried to configure by modifying the library path and source path which points to Flex 3.0 SDK library and source path from the following file,
{WAS_INSTALLED_PATH}\flex_war.ear\flex.war\WEB-INF\flex\flex-config.xml
But it is not working properly. Can anyone please help me, how to change Flex 3.0 SDK lookup for LCDS 2.5.1?
Thanks,
Murali Sankar Muthaiah

You can download the Flex 3 compiler for J2EE applications and update the compiler with the bits contained in that web application. http://opensource.adobe.com/wiki/display/flexsdk/Downloads Note that moving forward (LCDS 2.6 - in beta now) the MXML compiler will not come with LCDS at all. It is now part of the SDK and must be configured 'manually' if you want to use it. Probably the better thing to do is to compile your application with FlexBuilder 3 instead of the web tier compiler, you will have much more control over which Flex SDK you are using - plus you get a good IDE! -- Tom Jordahl <[email protected]> wrote in message news:[email protected].. > Hi, > > I deployed LCDS 2.5.1 version which uses Flex 2.0 by default. Now i want > to use Flex 3.0 with this LCDS. How to configure it? I tried to configure > by modifying the library path and source path which points to Flex 3.0 SDK > library and source path from the following file, > > {WAS_INSTALLED_PATH}\flex_war.ear\flex.war\WEB-INF\flex\flex-config.xml > > But it is not working properly. Can anyone please help me, how to change > Flex 3.0 SDK lookup for LCDS 2.5.1? > > Thanks, > Murali Sankar Muthaiah

How to configure and publish Webservice (WMS Redprairie) to SAP using RFC

Hi XI Techno Savies,
I know how to configure SAP RFC, SAP IDOC adapters for sending and receiving. I want to know the step by step procedure to configure and Publish Webservices for Ware House Management System "REDPRAIRIE" for sending and receiving message to SAP R3/BW. Kindly help me.
Thanks,
Sridhara Addala.

Hi,
This doc may help you-general
http://help.sap.com/saphelp_nw04/helpdata/en/0d/2eac5a56d7e345853fe9c935954ff1/content.htm
/people/durairaj.athavanraja/blog/2004/09/20/consuming-web-service-from-abap
in XI-
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/befdeb90-0201-0010-059b-f222711d10c0
Regards,
Moorthy

How to configure current SQL high availability cluster using mirroring with dedicated replication NICS?

We have a current HA cluster at center1 which is mirrored to another HA cluster in center2. We have several instances already installed and working which are using one NIC for data and replication. We want to prevent mirror failovers by
configuring a NIC on a replication network which has no DNS server. What are the steps to configure the current SQL instances to use this dedicated NIC for mirror replication?

Hi dskim111,
You can refer the following step by step article to create the dedicated mirroring NIC,
Step by Step Guide to Setup a Dedicated SQL Database Mirroring(DBM on dedicated Nic card)
http://blogs.msdn.com/b/sqlserverfaq/archive/2010/03/31/step-by-step-guide-to-setup-a-dedicated-sql-database-mirroring-dbm-on-dedicated-nic-card.aspx?Redirected=true
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to configure sync rules involving a CSV file and portal self service

Hello,
I need to configure some FIM sync rules for the following scenario:
User account details are entered from a HR CSV file and exported to AD Users have the ability to modify their own AD attributes in the
FIM portal (there is not a requirement for them to view their HR CSV data in the portal). The FIM portal modifications will be exported to AD as expected.
My setup is as follows:
CSV file - name, last name, employee ID, address.
CSV MA - has direct attribute flows configured in the MA between the data source and MV Portal self service attributes –
users can edit mobile, display name and photo
I've also set the CSV MA as precedent for the attributes
FIM MA – attribute flows defined for MV to Data Source as usual (i.e. firstname to firstname, accountname to accountname, etc).
AD MA – no attribute flows defined as inbound and outbound sync rules have been configured in the portal using the Set\MPR\Triple.
I’m thinking of using the following run profiles:
CSV MA – full import and delta sync (imports HR data)
FIM MA – export and delta import (imports portal changes)
FIM MA – delta sync (syncs any portal changes)
AD MA – export and delta import
If my understanding is correct this should sync HR data from CSV to AD, as well as user attribute self service updates from the portal to AD.
If I wanted to just do a HR CSV sync could I get away with just steps 1 & 4 ? (presumably not as my rules are in the FIM portal?)
If I wanted to do just a portal sync, could I get away steps 2-4?
Any advice on how to improve my setup is much appreciated - cheers
IT Support/Everything

The truth is that your design should be done in the way that it doesn't matter which profiles in which order you will execute. At the end, if you will run all import, synch and export profiles on each data source you should get same result. This is beauty
of synch engine here.
Your steps from 1-4 will synch data to your data sources and at the end will give you expected result. But not because of the order you are executing them but because of correct attribute flows. If flows from CSV file and from FIM portal might be done for
the same attributes you need to think also about attribute precedence.
Tomek Onyszko, memberOf Predica FIM Team (http://www.predica.pl), IdAM knowledge provider @ http://blog.predica.pl

How to configure boe.properties file in ACTool for SAP BO Distributed environment

Hi ,
I am trying to configure the ACTool for SAP BO distributed environment (dedicated BOE Server, Tomcat and Explorer) servers. I have installed SMD Agent, Host Agent and ACTool without any issues in the BOE server(CMS), but I am unable to run the ACTool in Tomcat Server(Web Tier) and Explorer servers.
1. How can we configure the boe.properties file for Tomcat Server and Explorer ser to run ACTool?
2. Is it required to install SMD_Agent and Host_Agent in Tomcat Server and Explorer server (in my case i have already installed).
3. What all parameters need to be set in boe.properties file so that ACTool will run correctly in Tomcat server and Explorer server correctly.
Regards
Pramod

Hi ,
I am trying to configure the ACTool for SAP BO distributed environment (dedicated BOE Server, Tomcat and Explorer) servers. I have installed SMD Agent, Host Agent and ACTool without any issues in the BOE server(CMS), but I am unable to run the ACTool in Tomcat Server(Web Tier) and Explorer servers.
1. How can we configure the boe.properties file for Tomcat Server and Explorer ser to run ACTool?
2. Is it required to install SMD_Agent and Host_Agent in Tomcat Server and Explorer server (in my case i have already installed).
3. What all parameters need to be set in boe.properties file so that ACTool will run correctly in Tomcat server and Explorer server correctly.
Regards
Pramod

How do i print from my mac book using printer connected to my Imac

I am trying to print from my Mac book by using the printer connected to my Imac however i keep getting a notice which says
Authentication required.what am i missing? I set them up to share printing but something is wrong

Before trying to figure out if I can help or not, a bit more specific information is needed:
1. You list an iMac G5 in your profile - is that the iMac you are using? In that case, you'd get more knowledgeable answers in the G5 forums (this is an Intel iMac forum). If you have an Intel, please give more details (model, etc).
2. What model/make printer? Does it have wireless capabilities?
3. What model/make router? Or are you simply trying to use the built in Airport from your iMac? In that case, do you have printer sharing enabled on both machines? If so, did you create a network? For detailed info on that, use the Help Menu in Finder and type in Network - one of the subjects available will be "creating a computer-to-computer network". It contains instructions on how to create it including a password (authentication).
You might also try to use the search function on this forum and type in "printer sharing". There are many threads, some of which might be useful to you.

How to configure Class Loading-Import Shared Library using admin_client

i am deploying ear using below command through command prompt.its deployed successfully.
java -jar ../admin_client.jar deployer:oc4j:localhost:23792 oc4jadmin oc4jadmin -deploy -file C:/ex.ear -deploymentName ex -bindAllWebApps
i have one requirement if i deploy thorugh command prompt. while deploying ear through admin console in Deploy: Deployment Settings-Configure Class Loading-Import Shared Libraries-i checked JAXB then the ear will be deployed successafully.
i need to incorporate same thing in above command also.i have created shared library and jars are placed in this path.
C:\Oc4J\j2ee\node1\shared-lib\JAXB\2.0
but while deploying ear using admin_client.jar command script i need to configure classs loading and import above shared library.how to modify the script?

Ours is not a Desktop Application, but we want to handle Authentication(Which authenticates the userid and password by making a Tuxedo call) and add the Principal to Subject in session, so that ADF Authorization and securityContext can be used as is,
but doing this with Custom Authentication Provider in weblogic needs me to have a lot of Tuxedo Service related jars in weblogic/system classpath which i feel is not right thing to do, as the same jars are required in application also, which means i will have the jars in class path twice and i need to deploy the jars to both places everytime there is any change.
Is there any way by which i can set Authenticated principal to Subject in the created session from within Application?

How to access mobile camera and address book using j2me?

I m using sun java wireless toolkit 2.5 beta and jdk1.5
how can i access my mobile camera using j2me ?
please give some example codes and links .....
reply as soon as possible.!!!!

Try this. Hope it help
try
Player m_player;
m_player = Manager.createPlayer("capture://video");
m_player.realize();
m_vc = (VideoControl)m_player.getControl("VideoControl");
m_vc.initDisplayMode(VideoControl.USE_DIRECT_VIDEO, this);
m_vc.setDisplayLocation(0, 0);
m_vc.setDisplayFullScreen(true);
m_player.start();
m_vc.setVisible(true);
catch ( IOException io )
catch ( MediaException mx)
Message was edited by:
RiekeyLee

How to access SMP if I don't use SAP product but only MaxDB?

Hi All,
I am sorry if this is answered elsewhere, I am a MaxDB user and our company operates a website with MaxDB as the data engine behind it since 2003. Recently I am evaluating if we can use synchronization to scale out, however I hit road blocks when I research information and most are on SMP which requires a login. How can I get access there ?
Regards,
Chris

Hi Chris,
the SAP Service Marketplace is for SAP customers only.
Anyhow, especially for MaxDB there are many information available for public use.
There's the [WIKI|https://www.sdn.sap.com/irj/scn/wiki?path=/display/maxdb/main] and the [MaxDB Website|http://maxdb.sap.com/] that includes online searchable documentation, as well as trainings materials and presentations from the MaxDB events.
A good starting point is always the [MaxDB Homepage here in SDN|https://www.sdn.sap.com/irj/sdn/maxdb].
If you don't find your questions answered with these options, you can always post your question here to the forum.
Anyhow, what information did you want to look up and only find them in the SAP notes on SMP?
Especially if you're an "Open Source"-MaxDB user, most of the available documentation is already made accessible via the resources I mentioned.
regards,
Lars

How to override security for table access when using SAP Query?

We have a number of infosets which use table join between PA0001 and CATSDB table. To execute a query based on such a query you would need access to table auth group PA through S_TABU_DIS. This was earlier not a problem as SAP query was earlier used by support staff and not end users. We do not want to give S_TABU_DIS with to end users as this amounts to givin them access to all PA tables.
The generated code for the query checks for the condition
"%rtmode-no_authchk = space"
before going for the authorization check.
Thus, ideally the authorization check for an InfoSet can be skipped if we can pass X for this variable from the InfoSet definition. Is there a way to do this?
Would appreciste any inputs to help suppress the authorization check at this point. Thanks.....

>
Julius Bussche wrote:
> Perhaps you could replace it with a class of your own (transaction SE24)?
>
> I have not tried to do this; it was just a thought.
>
> Kind regards,
> Julius
unfortunately this does not work. SAP saw fit to 'hard-code' the implementation of the interface in RSAQEXCE:
(only parts of that abap displayed here).
170 data: iref type ref to if_query_tab_access_authority.
1107 *       FORM AUTHORITY_BEGIN
1112 form authority_begin using p_auth_classname type AQS_CLSNA.
1119   perform authority_init using p_auth_classname.
1120   call method iref->access_authority_begin.
well for my part (searching a solution for a query on LTAK, wanting L_LGNUM as an object) i'm out of ideas. i shall have to modify SAP-standard and disable the class and do my own coding in the info-set. no other possibility - i cannot allow S_TABU_DIS for group LA and even if i did, what help would it be - i would have to allow that to all companies in that client having WM - and that would be literally all - i need LGNUM here!

How to configure IS-H outpatients appointment booking using SAP Portal?

Similar Messages

Maybe you are looking for