HOw to configure iSCSI remote boot on a SUN Server

For virtualization I need to use iSCSI remote boot from the SUN Server X2270 to a Disc Storage!
I've installed the "Intel® Gigabit ET Dual-Port Server Adapters" into this server.
During the boot time, I didn't see the message "Press <Ctrl-D> to ru setup..." or any message about "Intel iSCSI Remote Boot"! It is like the machine didn't see this Intel Card...
I didn't known any more what to do? as anyone an Idea about this problem?
Regards,
nm

Log into the global zone and run :
# shutdown -y -g0 -is
This should bring down the global zone to su mode and halt the other zones (notice Halt)
However I believe there is a bug presently where this does not always happen and you are still able to telnet to the local zones.
Local zone admin could always run zoneadm -z <zone-name> halt on each zone (notice halt not single-user).
Once global zone in in single-user mode install the patch as normal, when the global is done it will bring up each local zone to single-user mode to add the patch too.
118833-36 may need patch add and -G option as this patch also has been experiencing some issues, in which case I believe you would need to do the patch add process on each zone manually
Once the global zone is brought back up again it should bring up the local zones as well.
Let us know if you experience the locals not being halted as mentioned above and need to do it manually.

Similar Messages

How to configure Adobe LiveCycle designer on my SAP Server?

Dear friends.
I have installed SAP ECC 6.0 and Adobe LiveCycle designer ES 8.2 on my computer.
Now I want to use Adobe LiveCycle designer in SAP by TCODE:SFP.
Please tell me how to configure Adobe LiveCycle designer on my SAP Server in details.

Hi MSReddy,
You don't need to configure it on SAP server. It should be installed on you desktop only.
Install ADLC on your desktop and open SFP it should work. If its not showing you the layout it means you are using wrong version of ADLC. Use ADLC downloaded from SAP Service market place only.(service.sap.com), else it will create problems.
Regards,
Vaibhav

How to configure the ESS portal in ehp 6 server?

Dear All,
Pls advice me how to configure the ESS portal in my client server?
I want to create new iviews ,pages,workset and link them all to R/3,with total configuration steps please.
Thanks and Regards,
Pradip

hi pradeep ,
which version r u using wdjava or abap ? ......if ur using java you have to do all in home page framework and if you are using with launchpad from EHP5 better you can create it from launchpad by going to t -code LPD_CUST and select the ROLE:ESS and INSTANCE: MENU
REFER Below............
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e09b3304-07d8-2b10-dbbf-81335825454f?QuickLink=index&overridelayout=true&38388417774934
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a?QuickLink=index&overridelayout=true&5003637159921
http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=31476&bc=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/108c31e7-b6a7-2d10-3692-c1a9f7a5c4dc?overridelayout=true

How to configure V240 auto-boot after power failure?

Hi!
How to configure automatic boot of V240 machine after power failure? After power gets resored, V240 remains in standby mode and one has to press button on front to power it up. It is not convinient because power failure can occur, for example, at night and the machine is not booted until the first user awakens :)

Uhh... I've found publicly accessible document http://docs.sun.com/source/817-5481-11/variables.html :
Looks like this variable controls auto-power-up behaviour:
sc_powerstatememory
The sc_powerstatememory variable enables you to specify the state of the host server as false (keep the host server off) or true (return the server to the state it was in when the power was removed). This is useful in the event of a power failure, or if you physically move the server to a different location.
For example, if the host server is running when power is lost and the sc_powerstatememory variable is set to false, the host server remains off when power is restored. If the sc_powerstatememory variable is set to true, the host server restarts when the power is restored.
The values for this variable are as follows.
true - "Remembers" the state of the host server when power was removed and returns the server to that state when power is reapplied.
false - Keeps the server off when power is applied.

How to configure Symantec Mail Security for SMTP & Messaging Server 6.3

Hi!
I want to install a Symantec Mail Security for SMTP 5.0.1(host1) with Messaging Server 6.3 (in production - host2), but when I try to access to POP protocol to send a message from Internet, the system display a message with a relay problem.
- Could you help me with this issue?,
- Do you know some documentation that speaks of this?. I can't find any documentation that explain how to configure and integrate SMS and Messaging Server. Thanks in advance.
Regards, CR

ctemp1 wrote:
I want to install a Symantec Mail Security for SMTP 5.0.1(host1) with Messaging Server 6.3 (in production - host2), but when I try to access to POP protocol to send a message from Internet, the system display a message with a relay problem.I take it that you have configured the symantec software like this?
internet -> symantec mail security system -> sun messaging server -> recipientA better approach is the following
internet -> sun messaging server -> recipient
                          |
                         V
              symantec mail security system(refer here: http://blogs.sun.com/factotum/entry/messaging_server_correctly_deploying_the)
- Do you know some documentation that speaks of this?. I can't find any documentation that explain how to configure and integrate SMS and Messaging Server. Thanks in advance.There is no documentation specifically for symantec software but we do document how to send emails via the symantec mail security server using the aliasdetourhost channel keyword:
http://docs.sun.com/app/docs/doc/819-4428/6n6j42615?a=view#bgaqy
Regards,
Shane.

How to Configure internet channel to a relay SMTP server

Hi men,
My problem is How to Configure internet channel(or outbound mail) sending to a relay SMTP server. I want to test my spam software.
I have search and read Sun Messaging Administration document but haven't fought the guide.
./imsimta version
Sun Java(tm) System Messaging Server 7.0-0.04 32bit (built Jun 20 2008)
Thank and Regards,
Duc Tien.

tien86 wrote:
My problem is How to Configure internet channel(or outbound mail) sending to a relay SMTP server. I want to test my spam software. You can use the daemon channel keyword with the tcp_local channel e.g.
! tcp_local
tcp_local smtp nomx multiple remotehost inner switchchannel identnonenumeric \
pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tcp_auth loopcheck \
daemon relay.yourdomain.com
tcp-daemonIf the relay SMTP server only has an A record then use "nomx" instead of "mx".
http://msg.wikidoc.info/index.php/Mx%2C_nomx%2C_nodns%2C_defaultmx%2C_randommx%2C_nonrandommx%2C_nameservers%2C_defaultnameservers_Channel_Options
The "multiple" keyword instead of "single_sys" helps performance by increasing the number of emails per connection when sending to a relay system.
http://msg.wikidoc.info/index.php/Multiple%2C_addrsperfile%2C_single%2C_single_sys_Channel_Options
Regards,
Shane.

How to configure sap to use gmail as smtp server?

Hi experts,
I need to know how to configure gmail as my smtp server. In the scot transaction I don't see anywhere where to specify whether it is a ssh connection, ports for secure smtp, username, password.
Does anyone know how to configure sap to use gmail as the smtp server?
I've seen some similar threads about this, but they are of no help. Although they are classified as answered, in most cases the reason they are answered is because the person who made the query dropped the cause trying to make it work. I'd like to know for sure is this is possible or not.

Hi Camilo,
You can't set up gmail as your smtp server to handle this. gmail is an email server which generally are based on POP protocol. now for SAP to send mail to gmail, you would need one SMTP capable server which can relay those message received from SAP to configured email address.
As of WAS 6.10 SAP kernel supports SMTP without more components. i.e e-mails can be sent (or received) from the SAP system to each SMTP-compatible mail server. see SAP note 455140 for more details.
Hope this clarifies your doubt.
http://en.wikipedia.org/wiki/SMTP_server
Regards,
Debasis.

How to deploy a normal Java application onto Sun Server

Hi
How do you deploy a normal Java application onto the Sun server...what are the required config files one needs to set etc

You might want to start with the Java EE 5 tutorial, available here :
http://java.sun.com/javaee/5/docs/tutorial/doc/
--ken

Satellite U940-108 - How to configure BIOS to boot dual OS from SSD / HDD

How can i configure the BIOS to boot multi os ssd and HDD?
I want to boot from SSD one os and other os from HDD,
When i try to do it i have windows error?
Can you help me

Hi
I assume you want to install the OS (which one???) on the internal mSATA 32GB SSD?
This mSATA SSD is used for caching (hybrid boot) in order to boot Windows 8 faster.
I would recommend you to install the second OS on the HDD.
For that you should create new partition which could be used for OS installation.
Then boot from the Windows installation disk and install the 2nd OS on the new created partition.

How to configure apple remote desktop to work on 3g instead of wifi

Hello,
Can ARD be used with 3g to access my iMac from my macbook?
If it can be done, could someone please help with info on how to do this or set it up?
Thanks a lot..

when you use ARD at home can it wake the iMac from sleep?
What do you have the DLINK DIR-615 plugged into? (dsl modem, cable modem, extra)
So there are a couple ways to connect to a computer behind a router such as the dlink. One option is you configure the iMac to be the DMZ. The nice thing about this is you don't have to configure any ports. the bad thing about this, is any service your hosting on the mac is internet excess-able. the 2nd option is to configure specific ports on your router to be sent to the iMac. This give you more control over what services are access-able on the iMac over the internet; but it's also more work to setup.
Here is the manual for DLINK DIR-615,
page 32 explains how to setup a DMZ.
pages 27 and 28 explains how to setup "port forwarding."
Well known TCP and UDP ports used by Apple software products. if you chose the port forwarding, you'll probable need to use this document to figure out what ports you need to open. Here are some of the ports you would probable need to open. there would probable be other ports as well.
3031
TCP/UDP
Remote AppleEvents
eppc
Program Linking, Remote Apple Events
3283
TCP/UDP
Net Assistant
net-assistant
Apple Remote Desktop 2.0 or later (Reporting feature)
5900
TCP
Virtual Network Computing (VNC)
(Unregistered Use)
vnc-server
Apple Remote Desktop 2.0 or later (Observe/Control feature)
Screen Sharing (Mac OS X 10.5 or later)
5988
TCP
WBEM HTTP
wbem-http
Apple Remote Desktop 2.x (see http://www.dmtf.org/about/faq/wbem)
I'm not sure if the time capsule will be able to wake the computer over the internet; because it's not the router. the DLINK is.
Keep in mind, that even if you do configure your mac to be reach-able over the internet. Most internet connections change IP address. That's call DHCP. in short it's like trying to reach some one who hangs around different pay phones, but doesn't have a cell phone. In short, you can't really reliably get ahold of such a person.
If you call your internet provider they can tell you if your internet connection is static or DHCP.
If it is, there are things you can setup to bridge the gap between static and DHCP. That's called dynamic DNS, But ones you look at the cost of such a service; your probable going to find logmein cheaper, and an easier to configure solution. Because you don't have to mess around with your router, or configure port forwarding, or mess around with dynamic DNS.
You might even find out to run dynamic DNS your going to have to have your iMac always turn on any way. It's not that hard to configure your imac to be on, but have the screen off.
good luck
-TT

How to configure for remote JMS client?

I have my own Java JMS test program for performance measurements.
          I am using the JNDI and JMS provider functionality of the WebLogic 9.1 app-server but my test program is just pure JMS 1.02 sender/receiver clients - ie it is NOT part of, or deployed as a J2EE application.
          SINGLE MACHINE TEST
          ===================
          In a single machine environment I was able to
          - configure a JMSServer
          - configure a JMSSystemModule
          - configure resources for ConnectionFactories and Queue and Topics
          I then made what I believe to be a 'standalone' application module copied from some mysystemmodule-jms.xml and with that I somehow worked out how to deploy it using the weblogic.Deployer tool.
          The deployment apparently set up the JNDI and my JMS client could gain access to the administered objects and do what it does.
          Everything works.
          TWO MACHINE TEST
          ================
          I now have a second machine.
          I want to put my JMS sender client on this new machine and I want the JMS server and JMS receiver client to be unchanged from the SINGLE MACHINE TEST.
          But I really don't know quite how to proceed from here...
          Do I need to install the WebLogic app-server on the sender machine or is the weblogic.jar all I need?
          What is necessary configuration for JNDI access on the sender machine?
          Can I in fact use my original SINGLE MACHINE server unchanged as I am hoping?
          I don't think I want a "thin" client because I read that performance is impacted (and these are performance tests)
          Remember this is NOT a J2EE application. There is no MDB; no client-container; no descriptors etc. Maybe that makes it more complicated - I don't know.
          Sorry for such basic questions but if somebody can just point me to an appropriate example or tutorial it could save me days...
          Thankyou.

Hi,
          My problem is on similar lines. I have an applet based UI working on RMI/t3 protocol.
          I am using weblogic 9.2 as my app server.
          When my applet is executed on JRE 1.5x it works fine.
          But when I use JRE1.4x it gives the following exception
          java.lang.NoClassDefFoundError: javax/management/InvalidAttributeValueException
          at weblogic.rmi.internal.Stub.<clinit>(Stub.java:21)
          at java.lang.Class.forName0(Native Method)
          at java.lang.Class.forName(Class.java:141)
          at weblogic.rmi.internal.StubInfo.class$(StubInfo.java:34)
          at weblogic.rmi.internal.StubInfo.<clinit>(StubInfo.java:34)
          at java.lang.Class.forName0(Native Method)
          I have analyzed the reason for this.
          the class javax/management/InvalidAttributeValueException was included in java 1.5 and above. So JRE 1.4 does not have it.
          In previous versions of weblogic this class was a part of their 'weblogic.jar' file and in weblogic 9.2 it is not a part of weblogic.jar file so when I am using JRE1.4 and weblogic 9.2 then it obviously does not find this class hence the above exception.
          I tried to put this all together and made custom made client jar file incliding the necessary classes. I was able to get throght this exception only land up in following exception.
          java.lang.VerifyError: class weblogic.utils.classloaders.GenericClassLoader overrides final method .
               at java.lang.ClassLoader.defineClass0(Native Method)
               at java.lang.ClassLoader.defineClass(Unknown Source)
               at java.security.SecureClassLoader.defineClass(Unknown Source)
               at sun.applet.AppletClassLoader.findClass(Unknown Source)
               at java.lang.ClassLoader.loadClass(Unknown Source)
               at sun.applet.AppletClassLoader.loadClass(Unknown Source)
               at java.lang.ClassLoader.loadClass(Unknown Source)
               at java.lang.ClassLoader.loadClassInternal(Unknown Source)
               at weblogic.jndi.WLInitialContextFactoryDelegate.<clinit>(WLInitialContextFactoryDelegate.java:204)
               at weblogic.jndi.spi.EnvironmentManager$DefaultFactoryMaker.<clinit>(EnvironmentManager.java:26)
               at weblogic.jndi.spi.EnvironmentManager.getInstance(EnvironmentManager.java:48)
               at weblogic.jndi.Environment.getContext(Environment.java:307)
               at weblogic.jndi.Environment.getContext(Environment.java:277)
               at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
               at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
               at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
               at javax.naming.InitialContext.init(Unknown Source)
               at javax.naming.InitialContext.<init>(Unknown Source)
          I really need to support clients using Jre 1.4 and Jre 1.5
          I will really appreciate any help on this one.
          Please advise.
          Thank you all.

How to configure SLiM to boot before terminal

Hi, I've just installed Archlinux for the first time in a while... it's been a while since I last used Arch and i'm having an issue with the following:
I used to be able to configure some tty5 stuff in a file I can't remember right now to be able to boot my computer directly into my display manager without having to see the login prompt from the terminal. I know it's kind of sillo to get bothered by something like this, but I'd really like to know if there is a way now with systemd to do the same.
PS: My computer DOES boot into SLiM without me doing anything, but I'm able to see the login prompt at the terminal for about a second before SLiM launches.

I guess you could simply create a unit that switches to VT7 (or any other VT you use for X11) early in the boot process.
Use Exec=/bin/chvt 7
Edit: And maybe add console=tty1 to your kernel bootline.
http://zeeky-h-bomb.blogspot.de/2012/09 … ernel.html
Last edited by progandy (2013-09-02 23:19:39)

How to configure routers remotely

Hi Experts,
I recall using some of Cisco's tools where it required me to enter the SNMP RW and enable password to manage core switches similar to a 4507. With this tool, I am able to set the vlan association of several ports among other things. From a linux/unix device, is there a way like using snmpget, to run commands like "show ip wccp" for example on a remote router without having to login?
Thanks in advance!!!

Sure you can snmpwalk a device to retrieve any snmp oid values that are instrumented in the target device. It takes a bit of work to identify the right oid - typically one would research in a MIB browser to ascertain the proper OID and then do the query after having established a local copy of the MIB to help parse the query results into more human-friendly form.
That said, After a short check I was not able to find that or if Cisco has created a MIB for their implementation of WCCP. Bluecoat seems to have one for their devices - see http://ipmsupport.solarwinds.com/mibs/WCCP-MIB/tree.aspx
for example.

How to configure Ironport to Use an external Encrpytion server

Hi,
We would like to use an external encryption server to encrypt our emails.
The Ironport would still be the MX for our domain, and the encryption server would be in the same DMZ as the Ironport.
Here is the setup we would like to implement:
Incoming emails:
- Ironport check the connexion (senderbase)
- If encrypted (how to detect the mail as encrypted) the mail is not scan AV / SPAM
     - the is it goes to the decryption server
    - then back to Ironport to scan AV/spam
    - then goes to exchange
- If not encrypted the email is scanned AV/Spam
    - then goes to Exchange for delivery
Outgoing emails:
- Exchange to Ironport
- Scan AV/Spam
- If needs to be encrypted (with header detected)
     - then goes to encryption server
    - then back to ironport (no scan AV/Spam ) and delivery to Internet
-If does not need to be encrypted
      - then send to Internet
Is it possible to configure the Ironport to get this behaviour? and how? I still facing problems with the different flows....
Any idea would be very helpfull
Regards
RD

For incomig mails you can create a message filter like the following one:
route_pgp_smime_encrypted_data:
if (recv-listener == "your listener") AND (encrypted) AND (remote-ip != "IP of your encryption gw")
alt-mailhost ("IP of your encryption gw");
Greets
Jörg

How to configure SharePoint HNSC with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.

Could you please let me know how SharePoint HNSC can be configured with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.
In normal path based site collections/web applications, reverse proxy configuration can be done using alternate access mappings with Public URL = "proxy URL", internal = "HNSC Share Point URL" so that share point sends response back
to Public URL = "proxy URL".
In Host Named Site Collections, alternate access mappings are not supported. Each HNSC is designed to have only one URL in each zone. Zone is one of the five zones(Default,Intranet,Internet,Custom,Extranet) with each of which only one alternate
URL is associated. This is what we are able to get using power shell command "Set-SPSiteUrl", but this will not help us to get the response back to proxy URL after a request sent to share point because we could not find any mechanism in share
point HNSC to respond to a different URL(proxy URL). Consequently, Share Point URLs are exposed to external users.
Below share point article in MSDN blog is symmetrical to what we are observing with Share Point 2013 and Proxy Server. It mentions that internal HNSC URLs can’t be hidden using any proxy server. If hiding the internal Share Point URLS is a requirement,
it suggests to use a web application instead of host named site collections.
Though I’m also observing the same behavior with Share Point 2013 HNSC, Could you please confirm my understanding is correct.
http://blogs.msdn.com/b/kaevans/archive/2012/03/27/what-every-sharepoint-admin-needs-to-know-about-host-named-site-collections.aspx
Excerpt from above article-
"Host Named Site Collections Only Use One Host Name
Continuing on the discussion on AAMs and host named site collections, you cannot use multiple host names to address a site collection in SharePoint 2010. Because host-named site collections have a single URL, they do not support alternate access mappings and
are always considered to be in the Default zone. This is important if you are using a reverse proxy to provide access to external users. Products like Unified Access Gateway 2010 allow external users to authenticate to your gateway and access a site
as http://uag.sharepoint.com and forward the call to http://portal.sharepoint.com. Remember that URL rewriting is not permitted. Further, a site collection can only respond to one host name. This means if you are using a reverse proxy, it must forward the
calls to the same URL. If your networking team has a policy against exposing internal URLs externally, you must instead use web applications and extend the web application using an alternate access mapping."<u5:p></u5:p>

Hi Satish,
You are right that only one URL is allowed for each zone of the host-name site collections in both SharePoint 2010 and SharePoint 2013.
It is by design that each host-name site collection only support one URL for each zone.
The article below is about RTM version of SharePoint, and it is the same for SharePoint 2013 with the latest CU.
https://support.microsoft.com/en-us/kb/2826457
So to make the URL of HNSC not exposed to external users is not supported, you need to use path-based sites instead.
Best regards.
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

HOw to configure iSCSI remote boot on a SUN Server

Similar Messages

Maybe you are looking for