How to configure links (navigator)

changing colours? their are boring (a some)

argos.void wrote:ok.(wow!) thanks. but the same in links is possible?
Sorry, I have absolutely no idea, I never used links. You should check the links webpage and manpage to see how can you setup custom styling.
Edit: from links manpage:
-background-color 0xRRGGBB
Set menu background color in graphics mode. RRGGBB are hex.
-foreground-color 0xRRGGBB
Set menu foreground color in graphics mode. RRGGBB are hex.
Last edited by karol (2010-07-20 17:15:12)

Similar Messages

How to configure link between 2921 and SM-D-ES3G-48-P EtherSwitch Service Module

hi,
I can't do that like the procedure given by Cisco.
http://www.cisco.com/en/US/partner/docs/routers/access/interfaces/software/feature/guide/eesm_sw.html#wp1942894
Cisco Procedure :
interface gi10/0
ip address x.x.x.x x.x.x.x
service-module gigabitethernet 1/0 session
My result :
R2921-8CPITR-1(config)#int gi 1/1
R2921-8CPITR-1(config-if)#ip address 2.2.2.2 255.255.255.192
% IP addresses may not be configured on L2 links.
R2921-8CPITR-1(config-if)
R2921-8CPITR-1(config)#interface gigabitEthernet 1/1.1 ?
% Unrecognized command
R2921-8CPITR-1(config)#interface gigabitEthernet 1/1 ?
<cr>
R2921-8CPITR-1(config)#
the session is not possible also ?
R2921-8CPITR-1#service-module gigabitEthernet 1/1 sess
                                                  ^
% Invalid input detected at '^' marker.
R2921-8CPITR-1#
The routeur said that it's not a L3 port, so how to configure it to allow communication between the 2921 and the card ?
Is there a bug with that version I'm in 15.1(4)M4 ????
R2921-8CPITR-1#sh ver
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 20-Mar-12 18:57 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)
R2921-8CPITR-1 uptime is 19 hours, 21 minutes
System returned to ROM by power-on
System restarted at 16:00:45 GAB Fri Sep 14 2012
System image file is "flash0:c2900-universalk9-mz.SPA.151-4.M4.bin"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco CISCO2921/K9 (revision 1.0) with 479232K/45056K bytes of memory.
Processor board ID FGL1618119E
6 Gigabit Ethernet interfaces
2 terminal lines
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
Device#   PID                   SN
*0        CISCO2921/K9          FGL1618119E
Technology Package License Information for Module:'c2900'
Technology    Technology-package           Technology-package
              Current       Type           Next reboot
ipbase        ipbasek9      Permanent      ipbasek9
security      None          None           None
uc            None          None           None
data          None          None           None
Configuration register is 0x2102
R2921-8CPITR-1#

Same issue here.
I just waited a few minutes and the interface went down and back up, this time it was a L3 interface.
My guess is that it was booting the switch module IOS, and it detected it until it was fully booted:
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to down
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to down
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet1/0, changed state to up
Apr 11 05:26:52.795: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to up
Apr 11 05:27:46.895: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, changed state to administratively down
Apr 11 05:27:46.895: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to administratively down
Apr 11 05:27:46.947: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down
Apr 11 05:27:47.031: %LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to administratively down
Apr 11 05:27:47.083: %LINK-5-CHANGED: Interface GigabitEthernet1/0, changed state to administratively down
Apr 11 05:27:47.895: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-Service-Engine0/0, changed state to down
Apr 11 05:27:48.083: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to down
Apr 11 05:27:49.283: %IP-5-WEBINST_KILL: Terminating DNS process
Apr 11 05:27:52.499: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to up
Apr 11 05:27:53.087: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.1(4)M5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 04-Sep-12 16:50 by prod_rel_team
Apr 11 05:27:53.255: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start
Apr 11 05:27:53.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to up
Apr 11 05:28:21.435: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up
Apr 11 05:29:22.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to down
Apr 11 05:29:22.095: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
Router>en
Router#sh ip int brief
Interface IP-Address OK? Method Status Protocol
Embedded-Service-Engine0/0 unassigned YES unset administratively down down
GigabitEthernet0/0 unassigned YES unset administratively down down
GigabitEthernet0/1 unassigned YES unset administratively down down
GigabitEthernet0/2 unassigned YES unset administratively down down
GigabitEthernet1/0 unassigned YES unset administratively down down
GigabitEthernet1/1 unassigned YES unset up down
Vlan1 unassigned YES unset down down
Router#
Apr 11 05:29:46.106: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to upconf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int g1/0
Router(config-if)#ip add 1.1.1.1 255.255.255.0
Router(config-if)#no shut
Router(config-if)#
Apr 11 05:30:09.046: %LINK-3-UPDOWN: Interface GigabitEthernet1/0, changed state to up
Apr 11 05:30:10.046: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to up
Router(config-if)#end

How to configure links in My Services Lane

We have the requirement to configure links in the My services lane so that user can quickly reach out to basic services like Address,Bank Details, W4 withholding info etc.
Please suggest , we are struggling for the same.

http://scn.sap.com/community/erp/hcm/blog/2014/01/13/adding-another-launchpad-based-chip-in-hr-renewal check above and share your screen

To Do List Channel - How to configure links to queries?

Hi!
In the 'To Do List' Channel on the home page I have a link to Projects which shows a number in brackets at the end, which is usually the number of items you see when you follow the link, at least it is for my other examples...
However when I follow the Projects link I see a much smaller number of projects listed, so it would seem that different queries must be being executed...
So far I have not been able to find how this is configured - can anyone point me in the right direction please?
Many thanks!
Stuart

Hi,
You can do the following to configure your To Do List channel:
In the To Do List channel, click Edit.
On the Header page, clear the Use Channel Default Parameters checkbox if it is checked.
In the table under Parameter Values, the Parameter Value column indicates whether an event type is set to appear in the channel. Click the Edit icon for the event type to edit.
In the dialog box for New Channel Parameter Value in Channel Configuration, do one of the following:
- Check a box to select an event type for the channel.
- Clear a box to remove an event type from the channel.
Click OK.
Click the Save button in the toolbar.
Note: To return to the default event types, check the Use Channel Default Parameters box.
Also, if you goto Setup --> Query Definitions and key in projects, you can see the list of all Queries that are associated with projects. From this you can determine which ones are being accessed by the To Do List.
Some of these that I can see are:
All Project Details - FCI-MomentumRepAllProjects
All Projects -     FCI-AllProjects
All Projects Available As Subprojects -FCI-AvailableAsSubProject
All Projects Counted - FCI-MomentumRepAllProjectCount
Were you looking for this information?
Thanks,
Vikram

How to configure Personal WS to sort names by last name?

Hello,
I was recently going through my Novell Vibe Admin Guide and came across directions on how to configure the navigation panel in the Personal Workspaces to sort names by last name (by adding wsTree.titleFormat=1to the ssf-ext.properties file). Does anyone know how to do this with the actual Personal Workspace Landing Page itself? We use the Personal Workspace Landing Page as a make shift employee directory. Please see the attached image if I am not being very clear:
I thank you for your help.

Originally Posted by rblehar
Hello,
I was recently going through my Novell Vibe Admin Guide and came across directions on how to configure the navigation panel in the Personal Workspaces to sort names by last name (by adding wsTree.titleFormat=1to the ssf-ext.properties file). Does anyone know how to do this with the actual Personal Workspace Landing Page itself? We use the Personal Workspace Landing Page as a make shift employee directory. Please see the attached image if I am not being very clear:
I thank you for your help.
I haven't tested/checked this, but maybe it's possible by modifying the profile_list.jsp (in /[vibe install path]/apache-tomcat/webapps/ssf/WEB-INF/jsp/definition_elements/)
This thread could be of use: https://vibe.novell.com/ssf/a/c/p_na...beonprem_url/1
Curious to know how you go!
Cheers,
Willem

Customising top link navigation

hi.. how do i change the current top link navigation to breadcrumb navigation?
how my top link navigation looks like currently

Hello,
You need to modify your master page in designer and increase the below parameter level:
StaticDisplayLevels="X"
MaximumDynamicDisplayLevels="X"
http://blog.incworx.com/blog/sharepoint-2010-tips-and-tricks/how-to-create-global-navigation-submenu-levels-in-sharepoint-2010
Later you can enable publishing feature on site collection (click here to know more about feature) and modify the navigation
as per below link:
http://meherkanthch.blogspot.nl/2008/11/how-to-add-to-sub-sub-menu-in.html
Remember, publishing feature is not available in foundation.
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

How to configure a link in my page which should navigates to new webpage

Hi ,
Iam using Jdev 11g(11.1.2.0.0)
My scenario is like i need to configure a link in my page. If i click that link , it should navigates me to another web page.
Please tell me how to configure the URL to which it has to be navigated on clicking the link.
Thanks in advance

I assume that you are using adf rich faces. In this case you use an af:goLink and give the whole URL as you would type it in the browser as the 'destination' property select '_blank' as 'TargetFrame' to open a new window...
Timo

How to configure a custom link in ESS for LTA?

I have a requirement to display a pop-up alv report, once user click on a link "Leave_Details" in ESS. I am able to display pop-up alv but background screen is empty as its a separate WD application however I want that as soon as user selects any row from that popup alv it should be fetched and displayed on the LTA screen of Portal. It seems link is not configured so its displaying blank background screen while for other standard links this screen is displayed.
Kindly help in this how we can display a custom link in ESS and after fetching any single record it should be closed and single row would be displayed in LTA screen.
Here the background ESS screen is blank for custom link displaying this pop-up alv.
For other standard links ESS screen is displaying.

Hi Samuli,
Thanks for your reply however here I am not asking how to create popup, it has already created however my question is, how to configure the link used to display that popup alv?
As shown in the screen as soon as user clicks on the given link shown in below screenshot this popup is displayed,
and after clicking on this link, below screen is displayed
Here background screen is empty whereas it should display the ESS screen in the background, so as soon as user select any row from the popup alv, i'll pass the data into ESS screen using BADI.
Kindly revert with possible solution.

How to create links in navigation tabs?

This is probably a silly question. In the other template I use, (which is a spry asset, and this is likely the difference), I select the area and the "properties" area below becomes available, and I can create the link.
These particular tabs don't do that . . . how can I link them to other pages in the site?
http://asptfacultycaucus.info/#
Thanks for any help!
Pamela

Jtanna,
this seems to have totally fixed the navigation problem. I was very careful to use the code you suggested, and not delete or add anything else.
However, I HAVE goofed something up in getting the stylesheet saved to the directory. Now when I open the index and other pages in DW, they do not appear to be "connected" to a stylesheet! When I click on "stylesheet.css" in the menu tabs, I get this dialogue in yellow: " 'stylesheet.css' cannot be found. If the file exists on the server, use the Files panel to get the file from the server."
The file exists right in the directory under local files in DW. It exists in the "publish" folder.
I'm afraid to make further changes . . . and client is getting cranky . . . help?
http://asptfacultycaucus.info/#
Here is the stylesheet as it exists right now (code for the design template follows if that helps at all):
@charset "UTF-8";
/* --- CSS Document by Codify Design Studio - codifydesign.com --- */
body {
    margin: 0px;
    color: #666;
    font-size: 12px;
    font-family: Arial;
    font-family: Arial, Verdana, Univers;
    background-color: #545454;
    background-image: url(images/page_bkgd.jpg);
    background-repeat: repeat-x;
h1 {
    color: #4F6179;
    font-size: 24px;
    font-weight: normal;
    margin: 3px 0px 25px 0px;
h2 { color: #333333; font-size: 14px; font-weight: normal; margin: 0px 0px 15px 0px; }
a          { color: #ba7007; }
a:visited { color: #ba7007; }
a:hover    { color: black; }
.container {
    width: 980px;
    margin-left: auto;
    margin-right: auto;
    background-image: url(images/content_bkgd_tile.jpg);
    background-repeat: repeat-y;
/* BANNER AREA */
.bannerArea {
    width: 980px;height: 145px;
    background-color: #4971a2;
    background-image: url(images/banner_bkgd.jpg);
    background-repeat: no-repeat;
.bannernav {
    padding-top: 10px;
    padding-right: 40px;
    float: right;
    color: white;
    font-size: 10px;
    font-family: Arial, Helvetica, Verdana, sans-serif;
.bannernav a {
    color: white;
    text-decoration: none;
.bannernav a:visited {
    color: white;
.bannernav a:hover {
    color: #ECBB7B;
.toplogo {
    margin-left: 70px;
    padding-top: 20px;
.content {
    padding-top: 20px;
    padding-bottom: 20px;
    background-image: url(images/content_bkgd.jpg);
    background-repeat: no-repeat;
/* LEFT NAVIGATION */
.leftnavigation {
    width: 192px;
    margin: 70px 0px 0px 0px;
    padding-left: 8px;
    float: left;
    list-style-type: none;
.leftnavigation a{
    margin-left: 0px;
    width: 156px;
    padding-left: 15px;
    padding-top: 5px;
    padding-right: 20px;
    padding-bottom: 5px;
    float: left;
    color: #364957;
    font-size: 10px;
    font-weight: bold;
    font-family: Verdana, Arial, Helvetica, sans-serif;
    text-decoration: none;
    background-image: url(images/nav_normal.jpg);
    background-repeat: repeat-x;
    background-position: 0px 0px;
    border-bottom: 1px solid #999;
.leftnavigation a:visited{
    color: #364957;
.leftnavigation a:hover{
    color: #ffffff;
    background-image: url(images/nav_down.jpg);
/* CONTENT AREA */
.contentleft {
    width: 440px;
    padding-left: 30px;
    padding-right: 20px;
    float: left;
.contentright {
    padding-top: 55px;
    float: left;
    width: 210px;
.imageright {
    margin-top: 10px;
    margin-left: 10px;
    float: right;
.imageleft {
    margin-right: 10px;
    float: left;
/* FOOTER AREA */
.footerArea {
    width: 980px;height: 88px;
    background-color: #cfcfcf;
    background-image: url(images/footer_bkgd.jpg);
    background-repeat: no-repeat;
.copyright {
    border-top: solid;
    border-color: #737a90;
    border-width: 2px;
    margin-left: 240px;
    margin-right: 30px;
    padding-top: 12px;
    color: #666666;
    font-size: 10px;
    font-family: Verdana,Arial, Helvetica, sans-serif;
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html>
    <head>
    
    <title>Part-time Faculty Caucus</title>
    
<meta name="description" content="Designed and developed by Codify Design Studio - codifydesign.com" />
        <link rel="stylesheet" type="text/css" href="../stylesheet.css" />
        
        
    <script src="../SpryAssets/SpryAccordion.js" type="text/javascript"></script>
    <link href="../SpryAssets/SpryAccordion.css" rel="stylesheet" type="text/css" />
</head>
    <body>
        <div class="container">
            <div class="bannerArea">
                <div class="bannernav"><a href="#" >Privacy Policy</a> | <a href="#" >Contact Us</a> | <a href="#" >Site Map</a></div>
                <div class="toplogo"><a href="#"><img src="../images/transparent.gif" width="365" height="90" border="0" /></a></div>
            </div>
            <div class="contentArea">
                <ul class="leftnavigation">
                    <li><a href="officers.html" >Officers</a></li>
        <li><a href="bylaws.html" >Bylaws</a></li>
        <li><a href="resolutions.html" >Resolutions</a></li>
        <li><a href="documents.html" >Documents</a></li>
        <li><a href="publications.html" >Publications</a></li>
                </ul>
                <div class="content">
                    <div class="contentleft">
                        <h1>Lorem Ipsum dolor sit amet</h1>
                        <img src="../images/content_photo_1.jpg" width="193" height="150" border="0" class="imageright" />
                        <p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Morbi commodo, ipsum sedpharetra gravida, orci magna rhoncus neque, id pulvinar odio lorem non turpis. Nullam sit amet enim. Suspendisse id <a href="#">velitvitae ligula</a> volutpat condimentum. Aliquam erat volutpat. Sed quis velit. Nulla facilisi. Nulla libero. Vivamus pharetra posuere sapien. Nam consectetuer. Sed aliquam, nunc eget euismod ullamcorper, lectus nunc ullamcorper orci, fermentum bibendum enim nibh eget ipsum. Donec porttitor ligula eu dolor. Maecenas vitae nulla consequat libero cursus venenatis. Lorem ipsum dolor sit amet. </p>
                        <img src="../images/content_photo_2.jpg" width="163" height="141" border="0" class="imageleft" />
                    <p>Consectetuer adipiscing elit. Morbi commodo, ipsum sed pharetra gravida, orci magna rhoncus neque, id pulvinar odio lorem non turpis. Nullam sit amet enim. Suspendisse id velit vitae ligula volutpat condimentum. Aliquam erat volutpat. Sed quis velit. Nulla facilisi. Nulla libero. Vivamus pharetra posuere sapien.</p>
                        <p>Nulla libero. Vivamus pharetra pos uere sapien. Nam consectetuer. Sed aliq uam, <a href="#">nunc eget euismod ullamcorper</a>, lectus nunc ullamcorper orci, fermentum bibendum enim nibh eget ipsum. Donec porttitor ligula eu dolor.</p>
                    </div>
                
                    <div class="contentright">
                        <div id="SpryAccordion1" class="Accordion" tabindex="0">
                            <div class="AccordionPanel">
                                <div class="AccordionPanelTab tabTop">
                                    <div class="accordion_340_tab"> TELLUS PROIN EU ERAT </div>
                                </div>
                                <div class="AccordionPanelContent">
                                    <div class="acontent">
                                        <p>Nulla facilisi. Nulla libero. Vivamus pharetra posuere sapien. Nam consectetuer. Sed aliquam, nunc eget euismod ullamcorper, lectus nunc ullamcorper orci, fermentum bibendum enim nibh eget ipsum. Donec porttitor ligula eu dolor.</p>
                                    </div>
                                </div>
                            </div>
                            <div class="AccordionPanel">
                                <div class="AccordionPanelTab middleTab">
                                    <div class="accordion_340_tab"> HOW LONG DO THEY LAST?</div>
                                </div>
                                <div class="AccordionPanelContent">
                                    <div class="acontent">
                                        <p>The majority of part-time instructors teach for about seven years before leaving to find other employment</p>
                                    </div>
                                </div>
                            </div>
                            <div class="AccordionPanel">
                                <div class="AccordionPanelTab middleTab">
                                    <div class="accordion_340_tab"> WHO IS AFFECTED? </div>
                                </div>
                                <div class="AccordionPanelContent">
                                    <div class="acontent"> <img class="imageright" src="images/accordion_photo.jpg" border="0" />
                                        <p>There are roughly 46,000 PT Community College instructors teaching in California, many of them free-way flyers.</p>
                                    </div>
                                </div>
                            </div>
                        </div>
                        <div class="AccordionBottom"></div>
                    </div>
                    <div style="clear:both;"></div>
                </div>
                <div style="clear:both;"></div>
            </div>
            <div class="footerArea">
                <div class="copyright">© 2011 California Academic Senate Part-time Faculty Caucus. All rights reserved. Page design: Pamela Hanford</div>
            </div>
        </div>
        <script type="text/javascript">

        </script>
    </body>
</html>

Owb92 demo: How to configure workflow database link?

Hi,
I follow the doc for owb92 demo, but got error while deploying the wh_proc_loc. The error is as follows. How do configure workflow database link on owb? Thanks.
RPE-02085: Failed to test wb_rti_workflow_util.initialize through deployed Workflow Database Link ORCL.US.ORACLE.COM@WB_LK_LD_OLAP. Please check that "EXECUTE ANY PROCEDURE" privilege is set and that the OWB Runtime is available.
- ORA-06550: line 1, column 7:
PLS-00201: identifier '[email protected]@WB_LK_LD_OLAP' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored

Have you checked whether none of the specified errors applies?
- The user needs the "EXECUTE ANY PROCEDURE" privilege
- OWB Runtime available, this could mean several things:
......* runtime repository unavailable (as in not installed?... unlikely)
......* runtime platform service unavailable --> try running service_doctor.sql in directory <your OWB home>\owb\rtp\sql\
Good luck, Patrick

How to configure cRIO 9004 and link it with Labview?

Today i tried to connect the cRIO 9004 to my pc using the serial cable
but unfortunately the controller was not detecting on my pc. Then I
turned on the IP reset button and tried connecting it using LAN to get
an IP address but it also didn't work. I was looking for drivers on the
internet and NI website but I couldn't find any directly related ones.
Status light is blinking slowly and continuously(one flash every
couple of seconds). According to cRIO 9004 manual it indicates "That the
controller is unconfigured. Use MAX to configure the controller.
Refer to the Measurement & Automation Explorer Help for information
about configuring the controller".
I tried MAX but its still not detecting the controller to configure.
It would be great if you'll could help me out with this as I'm configuring this type of a controller for the first time.
Thanks and regards
Kavin

Hey,
First of all get sure that you have LV RT and FPGA as well as the NI RIO driver installed at your system.
Then the easiest way would be to use a crossover ethernet cable to directly connect the cRIO to your PC.
Give the PC a static IP Adress e.g. 100.100.100.100. Deactivate Firewall and Virus Scanners.
Reboot the cRIO with IP Reset Switch ON, then it should appear in MAX under Network Devices with IP 0.0.0.0.
Give the cRIO also a static IP like 100.100.100.111, set IP Reset switch to OFF before saving this settings.
Now you can install the software at your cRIO also via MAX.
Then you should be able to find it in LabVIEW by right-clicking "Project UntitledX" and "Add Targets and Devices".
There should be different tutorials online how to configure a cRIO or other Realtime targets.
Christian

How to configure and use KM

Hi Experts,
Iam new to KM.We need to configure KM for our client. When I surfed internet ,I can see only explanation on KM but I need steps for configuration and details about how well KM can be used. Share me the documents,procedures and steps to configure and use KM.
Currently Iam working on KM Navigation Iview and I have following doubts
1) Is there a way to allot some space in KM automatically when users are newly created.Under Userhome link of KM , for the newly created users a seperate link is automatically created .Do I have to assign that to user for using KM.
2)Can we restrict space for each user in KM.
3)How to configure and customize context menu in KM navigation iview.
Regards
Karthiheyan Murugesan

Hi Karthiheyan,
Still I have further requirement like How to transfer all datas of KM from one server to a new server for all the users (also how to create back up?
Through KM Tranport you can transport the contents from server to server
For KM content transport go through the below help document
http://help.sap.com/saphelp_nw70/helpdata/en/46/7649426fd759dbe10000000a1553f6/frameset.htm
How to customize the various options like view , actions ,settings present under Details option?
For the context menu of folder New->Forms->...How to restrict this forms visibility?
        This can be done using the Layout set,there you will be having collection render,resource render,details setting through which the options can be customized and the customized layout should be used in field layout set in the KM Navigation Iview.For further understanding go through the below document.
http://help.sap.com/saphelp_nw70/helpdata/en/30/504a1e7f0e354bbf9adedf1a29f3ec/frameset.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/504e31fc-f46f-2910-98b4-dd94478c22f8?QuickLink=index&overridelayout=true
Naga

How to configure Applications in workspace

I am intergrating OBIEE 10134 with EPM Workspace version 11.
As a very fresh fish to hyperion EPM, I'd like to knwo after installation, how to configure the "Applications" link and make it shows through Navigator in workspace. And the left pane of File - Peferences, how can I add something to the Pane( for example, Oracle BI)?
Any doc. or instruciton will be appreciated.

Hi,
You can create a folder by pressing the "New" button in the top-left corner of the interface.
One thing you might be having trouble with: to create a new folder you have to have a Workspace selected. You can't create a new folder in the "All Files" section.

How to customize top navigation css in SharePoint 2013?

Hi All,
How to customize top navigation css in SharePoint 2013?(Want to add colors for each link in the navigation)
My current page is like-
Expected-

Hi Sam,
Please check the following article about how to style the top navigation with custom css.
How to: Brand snippets by using CSS in SharePoint 2013
Thanks
Daniel Yang
TechNet Community Support

How to configure sso with SSL step by step

Purpose
In this document, you can learn how to configure SSO with SSL. After user have certificate installed in browser, he can login without input username and password.
Overview
In this document we will demonstrate:
1.     How to configure OHS support SSL
2.     How to Register SSO with SSL
3.     Configure SSO for certificates
Prerequisites
Before start this document, you should have:
1.     Oracle AS 10g infrastructure installed (10.1.2)
2.     OCA installed
Note:
1.     “When you install Oracle infrastructure, please make sure you have select OCA.
2.     How Certificate-Enabled Authentication Works:
a.     The user tries to access a partner application.
b.     The partner application redirects the user to the single sign-on server for authentication. As part of this redirection, the browser sends the user's certificate to the login URL of the server (2a). If it is able to verify the certificate, the server returns the user to the requested application.
c.     The application delivers content. Users whose browsers are configured to prompt for a certificate-store password may only have to present this password once, depending upon how their browser is configured. If they log out and then attempt to access a partner application, the browser passes their certificate to the single sign-on server automatically. This means that they never really log out. To effectively log out, they must close the browser.
Enable SSL on the Single Sign-On Middle Tier
The following steps involve configuring the Oracle HTTP Server. Perform them on the single sign-on middle tier. In doing so, keep the following in mind:
l     You must configure SSL on the computer where the single sign-on middle tier is running.
l     You are configuring one-way SSL.
l     You may enable SSL for simple network encryption; PKI authentication is not required. Note though that you must use a valid wallet and server certificate. The default wallet location is ORACLE_HOME/Apache/Apache/conf/ssl.wlt/default.
1.     Back up the opmn.xml file, found at ORACLE_HOME/opmn/conf
2.     In opmn.xml, change the value for the start-mode parameter to ssl-enabled. This parameter appears in boldface in the xml tag immediately following.
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server" module-id="OHS">
<module-data>
<category id="start-parameters">
<data id="start-mode" value="ssl-enabled"/>
</category>
</module-data>
<process-set id="HTTP_Server" numprocs="1"/>
</process-type>
</ias-component>
3.     Update the distributed cluster management database with the change: ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct opmn
4.     Reload the modified opmn configuration file:
ORACLE_HOME/opmn/bin/opmnctl reload
5.     Keep a non-SSL port active. The External Applications portlet communicates with the single sign-on server over a non-SSL port. The HTTP port is enabled by default. If you have not disabled the port, this step requires no action.
6.     Apply the rule mod_rewrite to SSL configuration. This step involves modifying the ssl.conf file on the middle-tier computer. The file is at ORACLE_HOME/Apache/Apache/conf. Back up the file before editing it.
Because the Oracle HTTP Server has to be available over both HTTP and HTTPS, the SSL host must be configured as a virtual host. Add the lines that follow to the SSL Virtual Hosts section of ssl.conf if they are not already there. These lines ensure that the single sign-on login module in OC4J_SECURITY is invoked when a user logs in to the SSL host.
<VirtualHost ssl_host:port>
RewriteEngine on
RewriteOptions inherit
</VirtualHost>
Save and close the file.
7.     Update the distributed cluster management database with the changes:
ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct ohs
8.     Restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl stopproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl startproc process-type=HTTP_Server
9.     Verify that you have enabled the single sign-on middle tier for SSL by trying to access the OracleAS welcome page, using the format https://host:ssl_port.
Reconfigure the Identity Management Infrastructure Database
Change all references of http in single sign-on URLs to https within the identity management infrastructure database. When you change single sign-on URLs in the database, you must also change these URLs in the targets.xml file on the single sign-on middle tier. targets.xml is the configuration file for the various "targets" that Oracle Enterprise Manager monitors. One of these targets is OracleAS Single Sign-On.
1.     Change Single Sign-On URLs
Run the ssocfg script, taking care to enter the command on the computer where the single sign-on middle tier is located. Use the following syntax:
UNIX:
$ORACLE_HOME/sso/bin/ssocfg.sh protocol host ssl_port
Windows:
%ORACLE_HOME%\sso\bin\ssocfg.bat protocol host ssl_port
In this case, protocol is https. (To change back to HTTP, use http.) The parameter host is the host name, or server name, of the Oracle HTTP listener for the single sign-on server.
Here is an example:
ssocfg.sh https login.acme.com 4443
2. Restart OC4J_SECURITY instance and verify the configuration
To determine the correct port number, examine the ssl.conf file. Port 4443 is the port number that the OracleAS installer assigns during installation.
If you run ssocfg successfully, the script returns a status 0. To confirm that you were successful, restart the OC4J_SECURITY instance:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Then try logging in to the single sign-on server at its SSL address:
https://host:ssl_port/pls/orasso/
     3. Back up the file targets.xml:
cp ORACLE_HOME/sysman/emd/targets.xml ORACLE_HOME/sysman/emd/targets.xml.backup
4. Open the file and find the target type oracle_sso_server. Within this target type, locate and edit the three attributes that you passed to ssocfg:
·     HTTPMachine—the server host name
·     HTTPPort—the server port number
·     HTTPProtocol—the server protocol
If, for example, you run ssocfg like this:
ORACLE_HOME/sso/bin/ssocfg.sh http sso.mydomain.com:4443
Update the three attributes this way:
<Property NAME="HTTPMachine" VALUE="sso.mydomain.com"/>
<Property NAME="HTTPPort" VALUE="4443"/>
<Property NAME="HTTPProtocol" VALUE="HTTPS"/>
5.Save and close the file.
6.     Reload the OracleAS console:
     ORACLE_HOME/bin/emctl reload
7. Issue these two commands:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Registering mod_osso
1.     This command sequence that follows shows a mod_osso instance being reregistered with the single sign-on server.
$ORACLE_HOME/sso/bin/ssoreg.sh
     -oracle_home_path $ORACLE_HOME
     -config_mod_osso TRUE
     -mod_osso_url https://myhost.mydomain.com:4443
2.     Restarting the Oracle HTTP Server
After running ssoreg, restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
Configuring the Single Sign-On System for Certificates
1.     Configure policy.properties with the Default Authentication Plugin
Update the DefaultAuthLevel section of the policy.properties file with the correct authentication level for certificate sign-on. This file is at ORACLE_HOME/sso/conf. Set the default authentication level to this value:
DefaultAuthLevel = MediumHighSecurity
Then, in the Authentication plugins section, pair this authentication level with the default authentication plugin:
MediumHighSecurity_AuthPlugin = oracle.security.sso.server.auth.SSOX509CertAuth
2.     Restart the Single Sign-On Middle Tier
After configuring the server, restart the middle tier:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Bringing the SSO Users to OCA User Certificate Request URL
The OCA server reduces the administrative and maintenance cost of provisioning a user certificate. The OCA server achieves this by authenticating users by using OracleAS SSO server authentication. All users who have an Oracle AS SSO server account can directly get a certificate by using the OCA user interface. This reduces the time normoally requidred to provision a certificate by a certificate authority.
The URL for the SSO certificate Request is:
https://<Oracle_HTTP_host>:<oca_ssl_port>/oca/sso_oca_link
You can configure OCA to provide the user certificate request interface URL to SSO server for display whenever SSO is not using a sertificate to authenticate a user. After the OracleAS SSO server authenticates a user, it then display the OCA screen enabling that user to request a certificate.
To link the OCA server to OracleAS SSO server, use the following command:
ocactl linksso
opmnctl stoproc type=oc4j instancename=oca
opmnctl startproc type=oc4j instancename=oca
You also can use ocactl unlinksso to unlink the OCA to SSO.

I have read the SSO admin guide, and performed the steps for enabling SSL on the SSO, and followed the steps to configure mod_osso with virtual host on port 4443 as mentioned in the admin guide.
The case now is that when I call my form (which is developed by forms developer suite 10g and deployed on the forms server which is SSO enabled) , it calls the SSO module on port 7777 using http (the default behaviour).
on a URL that looks like this :
http://myhostname:7777/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
and gives the error :
( Forbidden
You don't have permisission to access /sso/auth on this server at port 7777)
when I manually change the URL to :
https://myhostname:4443/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
the SSO works correctly.
The question is :
How can I change this default behaviour and make it call SSO on port 4443 using https instead ?
Any ideas ?
Thanks in advance

How to configure links (navigator)

Similar Messages

Maybe you are looking for