How to configure listener across firewall and router

I am trying a test to see if the following scenario will work and I am looking for insight because I am not getting anywhere fast....
I have a computer on an internal network running oracle 9iR2. This computer has a web server exposed through a router/firewall with port 80 open. I want to open port 1521 and make the oracle listenser available to someone outside my network. The client only has internet access through their ISP. Basically it would be like hitting the web server over the internet. I am not sure if it is possible to use SQL*Plus to connect to a database server using the name of the router (www.company.com) and have the Oracle database available.

I have serious doubts that this will work.This sould working definitely. But this question is more related to networking than DBA.
So this action (and aalso analysis) must be done by somebody who are responsible for (and unsterstand) routing and firewall administration.
This "networking person" (credited as somebody before) must prevent unauthorized access to your DB and also prevent sniffing (for example your 3rd parties will be connected via IPSEC connection).

Similar Messages

How to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

how to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

Hi ,
Have you got any additional public IP Address from your service provider , If yes on router you can have static route for those additional IP Address pointing to your ASA outside interface .
Accordingly you can configure NAT
HTH
Sandy .

How to configure listener and tnsnames.ora on 10g version

how to configure listener and tnsnames.ora on 10g version

If you are on linux platform, on command prompt execute netmgr and configure listener fromt there. Or go to $oracle_home/network/admin/listner.ora write the following
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
For tnsnames.ora write the following
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
)

How to configure users for internal mail routing only in exchange 2013

Hi Guys!
I have a scenario here that i have three (3) group of users, one group is able to have an inbound and outbound mail, meaning they can send and recieved emails from internal and external.The second group of users should have inbound mail(local mail) only
(cannot send and recieved mails from internet), and the third (3) user is they can recieved an outbound mail but they are not allowed to send mail directly to the client,(Ex.
[email protected],[email protected],[email protected]) instead they will use the
[email protected] as the reply to the client. Please let me know how to configure group user 2 and 3.
Thank you.
regards,
Paul

Hi Paul,
Great advice from Maganti, just elaborating steps:
Prevent Group 2 send e-mail to internet by transport rule:
1. Login EAC with administrator, Mail Flow---> Rule, click “Create a new rule, then give a name “Group2 - No Internet Mail”.
2. Conditions: select "From a member of a distribution list" & select group "Group2"
3. Select another condition "Sent to users inside or outside the organization" & Select Outside.
4. Actions: select "send bounce message to sender with enhanced status code" & write your custom message like “You are not authorized to send mails to internet”.
Prevent Group 3 directly send e-mail to internet, however it can send message as group:
We also can create a transport rule which is same with Group2, then open Active Directory Users and Computers to add send as permission with another group (contain same users as group3).
Best Regards,
Allen Wang

How can I listen to itunes and play a game at the same time on my ipad 4?

How can I listen to itunes and play a game at the same time on my ipad 4? This means I need to run 2 apps at the same time itunes and my game. The game has its own sound control so I can turn off its sound while i listen to itunes tracks. But I don't know how to set it up so the ipad does both.

Anytime you open an app that has a persistant sound stream - a movie, a podcast, some games - it will overide the music app's stream. nothiong you can do to change it.

How can you listen to music and play a game at the same time?

How can you listen to music and play a game at the same time?
I am playing music, by starting the Crash Baandicoot Nitro Kart 3D game it shuts off the music playing. Is there a way around this?
It seems like this should be possible.
Message was edited by: RuthlessVengeance
Message was edited by: RuthlessVengeance

Select the music play list you want to listen to and start it playing. Go back to the home screen and start the app you want to use, music will stop. Press the home button two time quickly and it will bring up a simple control for controling the music. This works for me with all of the apps I have purchased including games. Just a note you can pull up the same music control if the iPod is a sleep and locked by pressing the button three times quickly.
Mike

How to configure users for internal mail routing only

Hi Guys!
I have a scenario here that i have three (3) group of users, one group is able to have an inbound and outbound mail, meaning they can send and recieved emails from internal and external.The second group of users should have inbound mail(local mail) only (cannot send and recieved mails from internet), and the third (3) user is they can recieved an outbound mail but they are not allowed to send mail directly to the client,(Ex. [email protected],[email protected],[email protected]) instead they will use the [email protected] as the reply to the client. Please let me know how to configure group user 2 and 3.
Thank you.
regards,
LRMCP

Hi LRMCP,
Procedure is perfect which is given by Benoit, just elaborating steps.
Prevent form Sending Mails:
Create a transport rule on Hub Transport Server:
Organization Configuration -> Hub Transport -> Transport Rules -> New Transport Rule -> Give Name “Group2 - No Internet Mail”
Conditions: select "From a member of a distribution list" & select group "Group2"
Select another condition "Sent to users inside or outside the organization" & Select Outside.
Actions: select "send bounce message to sender with enhanced status code" & write your custom message like “You are not authorized to send mails to internet”
Prevent from Receiving Mails:
New User: You can select “require that senders are authenticated” while creating new users which will stop receiving mails from internet.
User -> properties -> Mail Flow Settings -> Message Delivery Restrictions -> Properties -> set Sender Authentication.
For Existing Users:
You have already a group named "Group2" so set sender authentication for all members with this single command.
Get-DistributionGroup "Group2" | Set-Mailbox -RequireSenderAuthenticationEnabled $true
Same procedure mentioned for group2 can be followed for Group3 to prevent from sending mails.
Amit Tank || MVP - Exchange || MCITP - Exchange 2007 || http://ExchangeShare.WordPress.com

How to configure SingleSignOn between GRC and BOBJ 4.1

How to configure SingleSignOn between GRC and BOBJ 4.1?
We have configured the System entitlement in BOBJ CMC. But didn't do anything on the GRC system.
User can login from BOBJ to GRC with password but not with SSO.
We haven't configured SNC . I don't this for this simple flow, we need to have SNC.
We haven't set up the Trust certificate exchange as well between BOBJ and GRC.
Please help us to know what are the mandatory settings need to be done to create a Relational connection for a ERP/GRC system from BOBJ client tool IDT?
thanks,
Tilak

How to configure SingleSignOn between GRC and BOBJ 4.1?
We have configured the System entitlement in BOBJ CMC. But didn't do anything on the GRC system.
User can login from BOBJ to GRC with password but not with SSO.
We haven't configured SNC . I don't this for this simple flow, we need to have SNC.
We haven't set up the Trust certificate exchange as well between BOBJ and GRC.
Please help us to know what are the mandatory settings need to be done to create a Relational connection for a ERP/GRC system from BOBJ client tool IDT?
thanks,
Tilak

How to Configure Listener in Weblogic 6.0

I have depoloyed my java application (war) in weblogic 6.0
This application has to behave as a listener for a client socket call on a particular port (say 5588).
This thing works fine in my WSAD environment with the internal server.
How do I configure Listener in Weblogic 6.0 so that my deployed application starts accepting socket call as a listener?
Please Suggest............

Here's the flow...
1) My application is deployed in Weblogic 6.0/7.0. It has to do an additional task of listening on an internal port (say 5588) apart from exposing server socket on say port 4499.
2) My application during startup calls a servlet and via servlet init and routing thereby to different classes my application becomes ready to behave as Client Socket on 5588. I am copying web.xml along with this mail. Please review the web.xml and let me know if it s good enough to invoke the servlet during startup?
3) A standalone java application tries to connect to my application mentioned above on port 5588 via a socket (localhost, 5588). Somehow my application doesnt seems to get hit. I did netstat and port was in listening mode.
4) 5588 being an internal port, I dont think it needs to be configured in Config.xml. Am I right? I didnt find any way of adding new ports to Config.xml apart from standard port on web.
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
     <display-name>MyProject</display-name>
     <servlet>
          <servlet-name>messagerouter</servlet-name>
          <display-name><![CDATA[Apache-SOAP Message Router]]></display-name>
          <servlet-class>org.apache.soap.server.http.MessageRouterServlet</servlet-class>
          <init-param>
               <param-name>faultListener</param-name>
               <param-value>org.apache.soap.server.DOMFaultListener</param-value>
          </init-param>
     </servlet>
     <servlet>
          <servlet-name>rpcrouter</servlet-name>
          <display-name><![CDATA[Apache-SOAP RPC Router]]></display-name>
          <servlet-class>com.s1.adapter.fundtech.MyServlet</servlet-class>
          <init-param>
               <param-name>faultListener</param-name>
               <param-value>org.apache.soap.server.DOMFaultListener</param-value>
          </init-param>
     </servlet>
     <servlet-mapping>
          <servlet-name>rpcrouter</servlet-name>
          <url-pattern>/servlet/rpcrouter</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>messagerouter</servlet-name>
          <url-pattern>/servlet/messagerouter</url-pattern>
     </servlet-mapping>
</web-app>

How to configure link between 2921 and SM-D-ES3G-48-P EtherSwitch Service Module

hi,
I can't do that like the procedure given by Cisco.
http://www.cisco.com/en/US/partner/docs/routers/access/interfaces/software/feature/guide/eesm_sw.html#wp1942894
Cisco Procedure :
interface gi10/0
ip address x.x.x.x x.x.x.x
service-module gigabitethernet 1/0 session
My result :
R2921-8CPITR-1(config)#int gi 1/1
R2921-8CPITR-1(config-if)#ip address 2.2.2.2 255.255.255.192
% IP addresses may not be configured on L2 links.
R2921-8CPITR-1(config-if)
R2921-8CPITR-1(config)#interface gigabitEthernet 1/1.1 ?
% Unrecognized command
R2921-8CPITR-1(config)#interface gigabitEthernet 1/1 ?
<cr>
R2921-8CPITR-1(config)#
the session is not possible also ?
R2921-8CPITR-1#service-module gigabitEthernet 1/1 sess
                                                  ^
% Invalid input detected at '^' marker.
R2921-8CPITR-1#
The routeur said that it's not a L3 port, so how to configure it to allow communication between the 2921 and the card ?
Is there a bug with that version I'm in 15.1(4)M4 ????
R2921-8CPITR-1#sh ver
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 20-Mar-12 18:57 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)
R2921-8CPITR-1 uptime is 19 hours, 21 minutes
System returned to ROM by power-on
System restarted at 16:00:45 GAB Fri Sep 14 2012
System image file is "flash0:c2900-universalk9-mz.SPA.151-4.M4.bin"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco CISCO2921/K9 (revision 1.0) with 479232K/45056K bytes of memory.
Processor board ID FGL1618119E
6 Gigabit Ethernet interfaces
2 terminal lines
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
Device#   PID                   SN
*0        CISCO2921/K9          FGL1618119E
Technology Package License Information for Module:'c2900'
Technology    Technology-package           Technology-package
              Current       Type           Next reboot
ipbase        ipbasek9      Permanent      ipbasek9
security      None          None           None
uc            None          None           None
data          None          None           None
Configuration register is 0x2102
R2921-8CPITR-1#

Same issue here.
I just waited a few minutes and the interface went down and back up, this time it was a L3 interface.
My guess is that it was booting the switch module IOS, and it detected it until it was fully booted:
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to down
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to down
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet1/0, changed state to up
Apr 11 05:26:52.795: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to up
Apr 11 05:27:46.895: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, changed state to administratively down
Apr 11 05:27:46.895: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to administratively down
Apr 11 05:27:46.947: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down
Apr 11 05:27:47.031: %LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to administratively down
Apr 11 05:27:47.083: %LINK-5-CHANGED: Interface GigabitEthernet1/0, changed state to administratively down
Apr 11 05:27:47.895: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-Service-Engine0/0, changed state to down
Apr 11 05:27:48.083: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to down
Apr 11 05:27:49.283: %IP-5-WEBINST_KILL: Terminating DNS process
Apr 11 05:27:52.499: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to up
Apr 11 05:27:53.087: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.1(4)M5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 04-Sep-12 16:50 by prod_rel_team
Apr 11 05:27:53.255: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start
Apr 11 05:27:53.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to up
Apr 11 05:28:21.435: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up
Apr 11 05:29:22.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to down
Apr 11 05:29:22.095: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
Router>en
Router#sh ip int brief
Interface IP-Address OK? Method Status Protocol
Embedded-Service-Engine0/0 unassigned YES unset administratively down down
GigabitEthernet0/0 unassigned YES unset administratively down down
GigabitEthernet0/1 unassigned YES unset administratively down down
GigabitEthernet0/2 unassigned YES unset administratively down down
GigabitEthernet1/0 unassigned YES unset administratively down down
GigabitEthernet1/1 unassigned YES unset up down
Vlan1 unassigned YES unset down down
Router#
Apr 11 05:29:46.106: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to upconf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int g1/0
Router(config-if)#ip add 1.1.1.1 255.255.255.0
Router(config-if)#no shut
Router(config-if)#
Apr 11 05:30:09.046: %LINK-3-UPDOWN: Interface GigabitEthernet1/0, changed state to up
Apr 11 05:30:10.046: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to up
Router(config-if)#end

How to configure initial-context-factory and provider_url on Websphere MQ

I have a few questions about WebSphere MQ. Currently, my application is able work well with other JMS provider. But I would like to move to use WebSphere instead.
Can anyone suggest me how to configure the application connecting WebSphere?
�     I�m using the Initial java naming factory as bellows: com.sun.jndi.fscontext.RefFSContextFactoryIs it the correct class?
�     About the java-naming-factory-url, How do I know what object that I should use? I found this example in JMSAdmin.config � iiop://localhost:7555� What�s iiop ?
�     What jar file that I should add in my classpath?

Hi,
You have a few options...
1. Use WebSphere Application Server as the JNDI provider
2. Don't use JNDI
3. Use the File System Context as the JNDI provider
Exploring these options in a bit more detail...
1. Use WebSphere Application Server as the JNDI provider
Assuming you have WAS, the best way of obtaining your queue is to define the Queue and Queue Connection Factory objects in WAS using the admin console, then obtain them from the Initial Context as per the following article
http://publib.boulder.ibm.com/infocenter/wasinfo/v6r0/index.jsp?topic=/com.ibm.websphere.express.doc/info/exp/ae/rnam_example_prop2.html
If you prefer not to do JNDI lookups in your code a great alternative is to use Spring (www.springframework.org). If you haven't come across spring before it's well worth a look. One of it's many features is a bean factory for creating your objects. There is lots of support for retrieving JMS objects from JNDI, so in the main all you have to do is write some XML similar to the following...
<bean id="jndiTemplate" class="org.springframework.jndi.JndiTemplate">
       <property name="environment">
              <props>
                     <prop key="java.naming.factory.initial">${jndi.initialContextFactory}</prop>
                     <prop key="java.naming.provider.url">${jndi.providerUrl}</prop>
              </props>
       </property>
</bean>
<bean id="queueConnectionFactory" class="org.springframework.jndi.JndiObjectFactoryBean">
       <property name="jndiTemplate" ref="jndiTemplate"/>
       <property name="jndiName" value="${jndi.queueConnectionFactory}"/>
</bean>
<bean id="queueName" class="org.springframework.jndi.JndiObjectFactoryBean">
       <property name="jndiTemplate" ref="jndiTemplate"/>
       <property name="jndiName" value="${jndi.queueName}"/>
</bean>There's a bit more to it than this, but not much. I've been meaning to write a tutorial on this for a while so if you're interested let me know.
2. Don't use JNDI
This approach involves using the creating the native MQ Queue Connection Factory and Queue classes. You can hard code this, but it's much better to abstract it from your application. Again you can use Spring. The definition would look something like the following...
<bean id="MQJMS_TP_CLIENT_MQ_TCPIP"
class="org.springframework.beans.factory.config.FieldRetrievingFactoryBean">
       <property name="staticField">
              <value>com.ibm.mq.jms.JMSC.MQJMS_TP_CLIENT_MQ_TCPIP</value>
       </property>
</bean>
<bean id="queueConnectionFactory" class="com.ibm.mq.jms.MQQueueConnectionFactory">
       <property name="transportType" ref="MQJMS_TP_CLIENT_MQ_TCPIP" />
       <property name="queueManager" value="${mq.queueManager}" />
       <property name="hostName" value="${mq.host}" />
       <property name="port" value="${mq.port}" />
       <property name="channel" value="${mq.channel}" />
</bean>
<bean id="publishInvoiceQ" class="com.ibm.mq.jms.MQQueue">
       <constructor-arg value="${mq.queueName}" />
</bean>
3. Use the File System Context
The file system context is just like a JNDI context, but instead of using a url like iiop://host:port you have to specify a file system url. Because FSContext is just another JNDI context you can still use the spring configuration from option 1, but just change the relevant parameters.
In order to define you queues and queue connection factory using the File System Context, you need to download a swing application called JMS Admin. Get it here
http://www-1.ibm.com/support/docview.wss?rs=171&uid=swg24004691&loc=en_US&cs=utf-8&lang=en
With regards your specific questions...
IIOP is just another communication protocol. If you want more details I'm sure typing "what is iiop" into google will provide plenty of hits.
I'll do my best to answer the remain two tomorrow - I wrote an application a few months ago which used the File System Context, but don't have the details to hand.

How to configure listener while upgrade to RAC 11.2.0.2?

I have 11.2.0.1 and preparing for upgrade to 11.2.0.2. While upgrading the single node we have to set the new oracle_home then configure listener for new home then upgrade the db.
How to follow the same steps in case of RAC. The listeners are running from grid_home.So how to create all the listeners for new oracle_home? So by just installing GRID binaries does is install the GI completely to 11.2.0.2?
Also Do I have to plan for listeners while RDBMS upgrade ?
ENV:
Server: Windows 2008R2
DB: RAC two node on ASM
Storage: SAN
Kindly explain.

Sabastian,
I have configured the 3 IPs for SCAN. When you replied for SCAN I checked the status of SCAN IPs. And the strange thing is on node 1 status of SCAN IPs gives "could not find the srvice name.
On second node :
LSNRCTL> *status LISTENER_SCAN1*
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN1)))
STATUS of the LISTENER
Alias LISTENER_SCAN1
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date 28-APR-2011 15:12:33
Uptime 3 days 16 hr. 17 min. 14 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File F:\gridinfra\11.2.0\grid\network\admin\listener.ora
Listener Log File f:\gridinfra\11.2.0\grid\log\diag\tnslsnr\PDFPGISORPRD1\listener_scan1\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\LISTENER_SCAN1ipc)))
*The listener supports no service*s
The command completed successfully
LSNRCTL> *status LISTENER_SCAN2*
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN2)))
STATUS of the LISTENER
Alias LISTENER_SCAN2
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date 26-APR-2011 10:38:30
Uptime 5 days 22 hr. 44 min. 58 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File F:\gridinfra\11.2.0\grid\network\admin\listener.ora
Listener Log File f:\gridinfra\11.2.0\grid\log\diag\tnslsnr\PDFPGISORPRD1\listener_scan2\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\LISTENER_SCAN2ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=164.156.155.81)(PORT=1521)))
Services Summary...
Service "gisprd" has 2 instance(s).
Instance "gisprd1", status READY, has 121 handler(s) for this service...
Instance "gisprd2", status READY, has 121 handler(s) for this service...
The command completed successfully
LSNRCTL> *status LISTENER_SCAN3*
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN3)))
STATUS of the LISTENER
Alias LISTENER_SCAN3
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date 26-APR-2011 10:38:30
Uptime 5 days 22 hr. 45 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File F:\gridinfra\11.2.0\grid\network\admin\listener.ora
Listener Log File f:\gridinfra\11.2.0\grid\log\diag\tnslsnr\PDFPGISORPRD1\listener_scan3\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\LISTENER_SCAN3ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=164.156.155.83)(PORT=1521)))
Services Summary...
Service "gisprd" has 2 instance(s).
Instance "gisprd1", status READY, has 121 handler(s) for this service...
Instance "gisprd2", status READY, has 121 handler(s) for this service...
The command completed successfully
LSNRCTL>
Why it is so? Last week when I was working it was fine. So do you mean if I have three SCAN IPs, all three IPs has to be in listener.ora?
Regards...Mayura
Edited by: user2995637 on May 2, 2011 6:32 AM

How to configure GlobeSurfer II umts modem router to act as just a modem

Sorry if this has been asked before but after three days of searching I haven't been able to find an answer.
I'd like to know how to configure a GlobeSurfer II umts modem router to act as just a modem allowing my TC to provide all the remaining wireless services.
I know the combination can easily be made to work with the TC as in bridge mode but doing that loses features of the TC that I'd like retain.
I've found a fairly comprehensive manual on line but it doesn't address my specific needs and I'm not techie enough to interpret the information that's provided into a work around.
Thanks

Hi Bob,
many thanks for answering. GlobeSurfer suggested the following
"the easiest is to use the Ethernet to connect the GlobeSurfer to your Capsule. Make sure that you have the 2 routers having difference IP address ranges and they don't overlap each other."
That pretty much contradicted everthing I've read in discussions so I've asked for information on how to
1. stop the GlobeSurfer from acting as DHCP and stop it providing IP addresses
2. make the GlobeSurfer a client of the Time Capsule
I was already using an e cable between the two but in the mean time I did the rest of what they sggested. The only warning I got on the TC was a "Double Nat" for which I clicked "ignore".
As a result I have the two networks that I wanted, (one protected with private HDDs and printer attached and one guest), I can connect to the internet through both, I've been able to extend the main using an Extreme in bridge mode and there's no sign of a third network being produced by the GSII. I'm delighted and I'm stunned to say that it worked.
It'll be interesting to hear what they come back with.
Thanks again

Difference between Firewall and Router

I can do VPN remote access configuration by using cisco firewall also I can do it using the cisco router by using the SDM program so what is the benefits from using the firewall or all of them are the same?
I mean it's recommended to use the firewill? if yes, why ?

Answer-
1) WE can make Security-Level on Firewall,but router can't
2) We can make firewall in multiple context(Virtual Firewall) but router can't
3) We can create SSL VPN on Firewall,but router can't
4) Whenever a packet inspected by Firewall and another packet comes with same contents then firewall didn't check that packet,
but router checks all packets.(show connections)
5) Firewall works as L2 and L3 both, but router only on L3.
6) Firewall inspects packets on L3 to L7 but router works on L3.
7) Firewall have Failover,router can't
8) Whenever we take trace,then firewall cannot comes on picture,but router always shows as a Hop Count.

How to configure listener when 8.1.5 & OAS 4.08 on same Linux box

Linux: Red HAT 6.1
OAS: 4.08
ORA: 8.1.5 sp2
When I install OAS on different home on the same server where the 8i is installed and try to start up the lsn service for it I get an error. How the configuration should be done in this case where we have two different homes with two different listener versions? whcih one should be used ?
Thanx
null

I did the manipulation...
The listener starts well, but the creation of a DAD ( Net 8 service version, of course) is impossible. After the sys password prompt, it opens a blank window,
and nothing more ...
The dadadmin cgi has been started and is running on the server, but does nothing.
Config : RH 6.1, Kernel 2.2.12, oas 4.0.8.1,
768 Mo RAM, enough disk, TNS_ADMIN set for oas4.0.8.1 to the tnsnames.ora of Ora 8i, distinct ORACLE_HOME
Any clues ?
Thanks.

How to configure listener across firewall and router

Similar Messages

Maybe you are looking for