How to configure logs and trace files
Hello people,
We have just implemented ESS-MSS, we have around 25000 people using this service and every 2 days my logs and trace file in server gets full and portal gets down.
Please suggest how to solve this problem,how can i reduce trace and log files,,,,,any configuration or setting is there to configure this...please suggest and explain how can it be done.
Biren
Hi,
You can control what messages gets logged depending on the severity.
This can be configured using Log Configurator, check this how you can set severity to different locations.
Netweaver Portal Log Configuration & Viewing (Part 1)
Regards,
Praveen Gudapati
Similar Messages
-
Timestamp in Java log and trace files.
Hi SAP'ies
Running PI 7.11 on AIX 6.3 we face an issue with the content of log and trace files from Java.
Eg.
The file DefaultTrace_00.0.trc is timestamped 18-05-10 11:16:15. (The same time as the time of the OS/AIX)
Looking inside the file the last statement is timestamped 2010 05 18 09:16:15.
How can we ensure that the content of these Java files are timestamped with OS time?
Looking into ABAP files like dev_w0 the timestamp of the file and the content are equal.
Best regards,
Teddy Løv AndersenHello All
Best way to convert the default trace time is , visit the site
http://www.csgnetwork.com/epochtime.html
here enter , for example if you have the following in default trace
#1.#00265510DE7300120000000F000022030004C77AD7309DF5#1345230317066#com.sap.portal.fpn.rdl
1345230317066 is time stamp , enter this in the above site to get the time
Fri Aug 17 2012 21:05:17 GMT+0200
Regards -
Hello experts, for our Netweaver AS administration, I am in charge of periodically checking logs and trace files. I would like to know which are the most useful logs and trace files and the information each one will hold. I am familiar with "DefaultTrace.trc", and as of today it is the only one I have used, but I believe I should also be looking at other logs and trace files.
Any suggestions?Hi Pedro,
If you are talking about JAVA only system defaulttrace is the best log/trace to look, there are other log files like application log, but maybe the best way to check you logs is using NWA (NetWeaver Administrator) on the following URL on your JAVA system:
http://<hostname>:<port>/nwa
From there you need to go to Monitoring -> Logs and Traces and then Predefined View/SAP logs.
My other recommendation is to change the severity level to ERROR for all you JAVA component within the Visual Administrator -> ServeNode -> Services -> Log Configurator -> Locations, otherwise it is possible that you see a lot of garbage on the defaulttraces. Anyway you can change the severity level per component, on demand, to investigate any possible problem.
The work directory is very imporant and maybe you can also check the file "dev_serverX" that also will give you information about any out of memory conditions and garbage collection activity if you have these values set for the server node using the config tool:
-verbose:gc
-XX:+PrintGCDetails
-XX:+PrintGCTimeStamps
You can find more information on here:
http://help.sap.com/saphelp_nw70/helpdata/en/ac/e9d8a51c732e42bd0e7de54b9ff4e2/content.htm
Hopefully this help you, let me know if you need more information,
Zareh -
External portal capturing internal portal URL in Log and trace file
Hi,
We are facing one issue in portal like we have two portals for internal (Intranet) and external (Internet) users.
Once users logged in the application and try to get the information about mylink from the external portal link (internet) they should not get any information about the internal portal.
But in log and trace file we can see the external portal link capturing the internal portal URL.
We need to find, from where system capturing the internal portal URL.
Thanks.The tkproffed trace file is in seconds.
"set timing" is in hh:mi:ss.uu format. So 00:00:01.01 is 1.01 seconds.
You have to remember that most of these measurements are rounded. While your trace file says it contains one second of trace data, you know it's more.
One excellent resource for trace files is "Optimizing Oracle Performance" by Cary Millsap & Jeff Holt. (http://www.amazon.com/Optimizing-Oracle-Performance-Cary-Millsap/dp/059600527X ) I thought I knew trace files before, but this book brings your knowledge to a whole new level.
There is also an excellent WP by Cary Millsap ( http://method-r.com/downloads/doc_details/10-for-developers-making-friends-with-the-oracle-database-cary-millsap ) that gives you some insight. -
How to get Log and Output File Names for a concurrent request
Hi,
I am submitting a concurrent frm OAF with the following code in AM
try{
OADBTransaction tx = getOADBTransaction();
Connection conn = tx.getJdbcConnection();
ConcurrentRequest cr = new ConcurrentRequest(conn);
Vector parameters = new Vector();
parameters.addElement("10");
nRequestID= cr.submitRequest("CIE","DTFEMP","","",false,parameters);
tx.commit();
}catch(RequestSubmissionException e)
How do i get the handle to log and output files for the abvoe concurrent request ?
One more thing is there a way where we can evaluate the environment variables
like in the above example once i get a the request id
logfile = $APPLCSF/$APPLOUT/"l"+requestID+".log"
and
outputfile=$APPLCSF/$APPLOUT/"o"+requestID+".out"
is there a way i can get the values of $APPLCSF and $APPLOUT from the os ?
Thanks
Tom...
Thanks
Tom ...You can query the Fnd_Concurrent_Requests table using Request_ID, which has the log & out file directory details.
Hth
Srini -
Removing alert logs and trace files
Hi everyone!
I noticed that in all the oracle databases, the trace files are piling and alert log is growing like anything ....
Thought of making a copy of the trace files somewhere and remove them from the hard disk excluding the most recent ones.
For alert log, thought of making a copy and renaming the current file so that Oracle can create a new one.
Any advice if there are better approaches in handling this?
Thanks in advance.user645399 wrote:
Hi everyone!
I noticed that in all the oracle databases, the trace files are piling and alert log is growing like anything ....
Thought of making a copy of the trace files somewhere and remove them from the hard disk excluding the most recent ones.
For alert log, thought of making a copy and renaming the current file so that Oracle can create a new one.
Any advice if there are better approaches in handling this?
Thanks in advance.I would include the alert log file in my backup strategy as it includes many important information; database parameter values,when and how the database was shut down, the important database errors and when they occur , etc ... I usually backup the alert log file once a month and keep 1 year of alert log file copies.. -
Alert log and Trace file error
Just found this in one of our alertlog file
Thread 1 cannot allocate new log, sequence 199023
checkpoint not complete
and this in trace file:
RECO.TRC file
ERROR, tran=7.93.23662, session# =1, ose=60:
ORA-12535: TNS: operation timed outWhy would you increase the log files when the problem is a distributed transaction timed out?
Distributed transactions time out when the data they need to access is locked. Unlike a local session that wants to update a row, which will wait forever, a distributed transaction times out. In earlier versions of Oracle you could set init.ora parameter distributed_lock_timeout to manage the timeout period. Oracle has since made this into an underbar parameter.
The solution is to ignore the problem unless it appears regularly in which case you have an application design issue.
HTH -- Mark D Powell -- -
Agent10g: Size of Management Agent Log and Trace Files get oversize ...
Hi,
I have the following problem:
I had installed the EM Agent10g (v10.2.0.4) on each of all my Oracle servers. I've done a long time ago (a few months or a few years depending on wich server it was installed). Recently, I've got PERL error because the "trace" file of the Agent was too big (the emagent.trc was more than 1 Gb) !!!
I don't know why. I checked on a particular server on the AGENT_HOME\sysman\config (Windows) for the emd.properties file.
The following properties are specified in the emd.properties file:
LogFileMaxSize=4096
LogFileMaxRolls=4
TrcFileMaxSize=4096
TrcFileMaxRolls=4
This file had never been modified (those properties correspond to the default value). It's the same situation for all Agent10g (setup) on all of the Oracle Server.
Any idea ?
NOTE: The Agent is stopped and started weekly ...
Thank's
YvesWhy don't you truncate the trace file weekly. You can also delete the file. The file will be created automatically whenever there is a trace.
-
Troubleshooting Network Problems Using Log and Trace Files
Hi,
can any one tell me how to generate trace and log files related to network errors.start with inspecting listener.log
Post tailend (last 40 lines here) of listener.log -
How to clear the alertlog and trace file?
since the database was created,the log and trace file have't been cleared.how to clear the alertlog and trace file?3tx!!
Hi Friend.
You can eliminate all the files ".TRC" (trace files) to purify the directory BDUMP. These are not necessary files in order that the Oracle Server works.
The file Alert.log is a file that the Oracle Server can recreate if you eliminate it. When Oracle Server's process realizes certain action (for example ARCH), Oracle creates again the file (if it does not exist), or it adds text (if it exists) with the new income.
It can happen, that appears some Bug if the file Alert.log does not exist. Though this is slightly possible.
Anyhow I recommend to you in UNIX to use from the prompt: $> filename in order to take the size of the file to 0 bytes, without need to eliminate it. Is the same thing when you want to purify the listener.log, the sqlnet.log or the sbtio.log.
I wait for my commentaries you be of great help.
Bye Friend... -
Redirect all logs e trace files.
How can I redirect all the logs and trace files in the WebAS Java to a different directory?
Tks for the help.
José SimõesHi Jose,
You can't change the standard directory. So you better look for an work around.
Regards,
Hari. -
Diff between Log files and Trace files
hi
What is the exact differences between Log Files and Trace Files.
And the relevant informative URL/reference materils would be highly appriciated.
Thanks
SekharHi,
Go through these,
http://help.sap.com/saphelp_nw04/helpdata/en/d1/7b1e40777cdd5fe10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0bf8c890-0201-0010-8b8c-fc93fa1f4795
Hope it clarifies
Regards
Srinivasan T -
How to overwrite a log and bad file in external table in oracle 10g
Hi,
I have used external table in oracle 10g.whenever use select query in external table orace internally create one log file in specified directory,
but this log file is growing.How can i overwrite the log file(old to replace with new).I need overwrite a log and bad file in external table.
kindly give the solutions.
By
SivaI don't believe that is possible with the LOGFILE clause, but it may be with the BADFILE clause. Here is an excerpt from the documentation :
The LOGFILE clause names the file that contains messages generated by the external tables utility while it was accessing data in the datafile. If a log file already exists by the same name, the access driver reopens that log file and appends new log information to the end. This is different from bad files and discard files, which overwrite any existing file. NOLOGFILE is used to prevent creation of a log file.
If you specify LOGFILE, you must specify a filename or you will receive an error.
If neither LOGFILE nor NOLOGFILE is specified, the default is to create a log file. The name of the file will be the table name followed by _%p and it will have an extension of .log. -
How to configure MDT tool kit files and UDI settings to enable lite touch installation
please assist me for lite touch installation. i have integrated MDT 2013 with SCCM 2012 R2 then not sure what next? like how to configure MDT tool kit files and UDI settings to enable lite touch installation
Here are some examples:
http://www.windows-noob.com/forums/index.php?/topic/5250-using-sccm-2012-rc-in-a-lab-part-18-deploying-a-udi-client-task-sequence-with-mdt-2012-rc1-integrated-in-configuration-manager-2012/
http://damonjohns.com/2013/08/20/integrating-udi-into-your-sccm-osd-task-sequences/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
NET8의 LOGGING AND TRACE관련 PARAMETER에 대한 Q & A
제품 : SQL*NET
작성날짜 : 1999-07-30
NET8의 LOGGING AND TRACE관련 PARAMETER에 대한 Q & A
==================================================
PURPOSE
NET8의 LOGGING AND TRACE관련 PARAMETER에 대해 알아 보도록한다
Explanation
1. NET8에서 trace를 왜 사용하고 어떤 component들에 trace를 할 수 있나요 ?
Trace의 특징은 네트워크을 수행하게 될때 network event들을 기술한다
즉 trace와 관련된 일련의 문장들이 자세하게 생성된다.
"Tracing"의 운영으로 log파일에 제공되어 있는 것 보다 NET8의 component들의
내부적인 정보를 보다 많이 얻을 수 있다.
이러한 정보는 에러의 결과로 인하여 발생하는 동일한 event들로 파일들에
결과가 생성되어 이를 이용하여 문제의 원인을 판단할 수 있다.
주의 : trace의 기능을 이용하는 경우 충분한 disk space와 system
performance의 현격한 저하를 가져올 수 있다.
즉 trace의 기능은 반드시 필요할 경우에만 사용할 것을 권한다.
Example
Reference Ducumment
<< trace의 기능을 이용하여 trace를 할수 있는 component들 >>
* Network listener
* Net8 components on the client and server
* Connection Manager
* Oracle Names Server
* Oracle Names Control Utility
* TNSPING utility
2. 어떤 parameter들을 설정하면 trace 기능을 이용할 수 있는가 ?
tracing을 하기 위해서는 특정 trace parameter들을 설정함으로써 가능하며
아래에 주어진 방법들과 또는 utility들중 하나를 선택하여 설정함으로써
사용할 수 있다.
* Component Configuration Files
* Component Control Utilities
* Oracle Trace
component의 configuration 파일을 이용하여 traceing parameter를 설정하려면
1) component의 configuration 파일에 다음의 traceing parameter를 설정한다.
- SQLNET.ORA for client or server, LISTENER.ORA for listener:
TRACE_LEVEL_<CLIENT/LISTENER/SERVER>=(0/4/10/16)
TRACE_DIRECTORY_<CLIENT/LISTENER/SERVER>=<directory name>
LOG_DIRECTORY_<CLIENT/LISTENER/SERVER>=<directory name>
2) 만일 component들이 수행중인 동안 configuration 파일의 수정이 있었다면
변경된 parameter들을 사용하기 위해 component들을 다시 시작하여야 한다.
component control utility들을 이용하여 trace parameter들을 설정하려면
1) listener의 경우, Listener Control Utility(lsnrctl)에서 TRACE 명령어를
이용하여 listener가 수행중인 동안에도 trace level을 설정할 수 있다.
EX)
RC80:/mnt3/rctest80> lsnrctl
LSNRCTL for SVR4: Version 8.0.4.0.0 - Production on 01-SEP-98 15:16:52
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
LSNRCTL> trace admin
Connecting to (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY))
Opened trace file: /mnt4/coe/app/oracle/product/8.0.4/network/trace/
lsnr_coe.trc
The command completed successfully
LSNRCTL> trace off
Connecting to (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY))
The command completed successfully
LSNRCTL> exit
RC80:/mnt3/rctest80>
2) Oracle Names의 경우, Names Control Utility(namesctl)에서 TRACE_LEVEL
명령어를 이용하여 Oracle Names가 수행중인 동안에도 trace level을
설정할 수 있다.
주의 : Connection Manager의 경우, trace level은 configuration 파일인
CMAN.ORA 에서만 설정할 수 있다.
Oracle Enterprose manager(이하 OEM)에 있는 Oracle Trace는 trace parameter
들을 설정하고 GUI를 통해 trace data의 형태를 볼수 있도록 하는 tracing tool
이다.
3. Trace된 data를 해석할 수 있는 다른 utility들이 있다면 ?
Trace Assistant를 사용하면 사용자의 *.trc 파일 (SQL*Net v2의 형식에 의해
생성된) 또는 *.txt (Orace Trace 과 TRCFMT에 의해 생성된 출력물)을 통해
trac된 정보를 해석할 수 있다.
이 유틸리티 네트워크의 문제들로 인해 발생하는 문제점들을 진단하고
해결하는 데 보다 많은 정보를 제공하여 사용자의 이해를 돕는다.
* the source and destination of trace files
* the flow of packets between network nodes
* which component of Net8 is failing
* pertinent error codes
다음에 주어진 명령어를 수행하므로써 Trace Assistant 실행할 수 있다.
trcasst [options] <filename>
Trace Assistant Text Formatting Options
-o Displays connectivity and Two Task Common (TTC) information.
After the -o the following options may be used:
c (for summary connectivity information)
d (for detailed connectivity information)
u (for summary TTC information)
t (for detailed TTC information)
q (displays SQL commands enhancing summary TTC
information)
-p Oracle Internal Use Only
-s Displays statistical information
-e Enables display of error information After the -e, zero
or one error decoding level may follow:
0 or nothing (translates the NS error numbers dumped
from the nserror function plus lists all
other errors)
1 (displays only the NS error translation from
the nserror function)
2 (displays error numbers without translation)
만일 option들이 제공되지 않는다면 기본적으로 -odt -e -s가 지정되어 자세한
connectivity, Two-Task Common, 에러 level 0 그리고 통계정보들이 tracing
된다.
4. SQL*Net v2 tracing과 어떻게 다른가 ?
Net8 tracing에서는 이전 버전인 SQL*NET V2에서 제공 되는 모든 option을
포함하고 있고 Oracle Trace의 기능이 추가되었다.
이것은 Oracle Trace Repository를 OEM 콘솔을 통하여 사용자의 trace 정보를
관리할 수 있도록 허용한다.
5. *.cdf와 *.dat은 어떤 파일 인가 ?
*.cdf 와 *.dat 파일들은 Oracle Trace에 의해 생성되는 파일들로서 이 파일들을
읽기 위해서는 반드시 trcfmt utility를 이용해야만 한다.
trcfmt는 binary (*.dat와 *.cdf의 확장자) 파일내에 있는 data를 일반text
(.txt의 확장자)로 정보를 추출한다. 이 tool을 사용하기 위해서는 다음의
명령어를 이용하면 된다.
$ trcfmt collection.cdf
주의 : .cdf와 .dat파일이 존재하는 디렉토리가 아닌 곳에서 이 tool을 이용
한다면 path가 포함되야 한다. 만일 하나의 .cdf 와 .dat 파일들내에
여러 프로세스들의 traceing정보가 수집된다면 그것들은 process_id.txt
의 이름과 함께 파일이 추출될 것이다.
6. trac관련 configuration은 어떤 것이 있으며 설정할 수 있는 parameter는
무엇이 있는가 ?
==========================================================================
|| SQLNET.ORA Parameters ||
==========================================================================
DAEMON.TRACE_DIRECTORY
Purpose: Controls the destination directory of the Oracle
Enterprise Manager daemon trace file
Default Value: $ORACLE_HOME/network/trace
Description
Available Oracle Enterprise Manager Installation Guide
Example: DAEMON.TRACE_DIRECTORY=/oracle/traces
DAEMON.TRACE_LEVEL
Purpose: Turns tracing on/off to a certain specified level for
the Oracle Enterprise Manager daemon.
Default Value: 0 or OFF
* 0 or OFF - No trace output
* 4 or USER - User trace information
Available Values
* 10 or ADMIN - Administration trace information
* 16 or SUPPORT - WorldWide Customer Support trace
information
Description
Available Oracle Enterprise Manager Installation Guide
Example: DAEMON.TRACE_LEVEL=10
DAEMON.TRACE_MASK
Purpose: Specifies that only the Oracle Enterprise Manager daemon
trace entries are logged into the trace file.
Default Value: $ORACLE_HOME/network/trace
Description
Available Oracle Enterprise Manager Installation Guide
Example: DAEMON.TRACE_MASK=(106)
LOG_DIRECTORY_CLIENT
Purpose: Controls the directory for where the log file is written
Default Value: Current directory where executable is started from.
Example: LOG_DIRECTORY_CLIENT=/oracle/network/trace
LOG_DIRECTORY_SERVER
Purpose: Controls the directory for where the log file is written
Default Value: Current directory where executable is started from.
Valid in File: SQLNET.ORA
Example: LOG_DIRECTORY_SERVER=/oracle/network/trace
LOG_FILE_CLIENT
Purpose: Controls the log output filename for an Oracle client.
Default Value: SQLNET.LOG
Example: LOG_FILE_CLIENT=client
LOG_FILE_SERVER
Purpose: Controls the log output filename for an Oracle server.
Default Value: SQLNET.LOG
Example: LOG_FILE_SERVER=svr
NAMESCTL.TRACE_LEVEL
Purpose: Indicates the level at which the NAMESCTL program should
be traced.
Default Value: OFF
Values: OFF, USER, or ADMIN
Example: NAMESCTL.TRACE_LEVEL=ADMIN
NAMESCTL.TRACE_FILE
Purpose: Indicates the file in which the NAMESCTL trace output is
placed.
Default Value: namesctl_PID.cdf and namesctl_PID.dat
Example: NAMESCTL.TRACE_FILE=NMSCTL
NAMESCTL.TRACE_DIRECTORY
Purpose: Indicates the directory where trace output from the NAMESCTL
utility is placed.
Default
Value: $ORACLE_HOME/network/trace
Example: NAMESCTL.TRACE_DIRECTORY=/ORACLE/TRACE
NAMESCTL.TRACE_UNIQUE
Indicates whether a process identifier is appended to the
Purpose: name of each trace file generated, so that several can
coexist.
Default
Value: OFF
Values: OFF or ON
Example: NAMESCTL.TRACE_UNIQUE = ON
TNSPING.TRACE_DIRECTORY
Purpose: Control the destination directory of the trace file
Default Value: $ORACLE_HOME/network/trace
Example: TNSPING.TRACE_DIRECTORY=/oracle/traces
TNSPING.TRACE_LEVEL
Purpose: Turns tracing on/off to a certain specified level
Default Value: 0 or OFF
* 0 or OFF - No trace output
* 4 or USER - User trace information
Available Values
* 10 or ADMIN - Administration trace information
* 16 or SUPPORT - WorldWide Customer Support trace
information
Example: TNSPING.TRACE_LEVEL=10
TRACE_DIRECTORY_CLIENT
Purpose: Control the destination directory of the trace file
Default Value: $ORACLE_HOME/network/trace
Example: TRACE_DIRECTORY_CLIENT=/oracle/traces
TRACE_DIRECTORY_SERVER
Purpose: Control the destination directory of the trace file
Default Value: $ORACLE_HOME/network/trace
Example: TRACE_DIRECTORY_SERVER=/oracle/traces
TRACE_FILE_CLIENT
Purpose: Controls the name of the client trace file
Default Value: SQLNET.CDF and SQLNET.DAT
Example: TRACE_FILE_CLIENT=cli
TRACE_FILE_SERVER
Purpose: Controls the name of the server trace file
Default Value: SVR_PID.CDF and SVR_PID.DAT
Example: TRACE_FILE_SERVER=svr
TRACE_LEVEL_CLIENT
Purpose: Turns tracing on/off to a certain specified level
Default Value: 0 or OFF
* 0 or OFF - No trace output
* 4 or USER - User trace information
Available Values
* 10 or ADMIN - Administration trace information
* 16 or SUPPORT - WorldWide Customer Support trace
information
Example: TRACE_LEVEL_CLIENT=10
TRACE_LEVEL_SERVER
Purpose: Turns tracing on/off to a certain specified level
Default Value: 0 or OFF
* 0 or OFF - No trace output
* 4 or USER - User trace information
Available Values
* 10 or ADMIN - Administration trace information
* 16 or SUPPORT - WorldWide Customer Support trace
information
Example: TRACE_LEVEL_SERVER=10
TRACE_UNIQUE_CLIENT
Used to make each client trace file have a unique name to
Purpose: prevent each trace file from being overwritten with the next
occurrence of the client. The PID is attached to the end of
the filename.
Default
Value: OFF
Example: TRACE_UNIQUE_CLIENT=ON
USE_CMAN
If the session is in an Enhanced Discovery Network with a
Purpose: Names Server, this parameter forces all sessions to go
through a Connection Manager to get to the server.
Default
Value: FALSE
Values: TRUE or FALSE
Example: USE_CMAN=TRUE
==========================================================================
|| LISTENER.ORA Parameters ||
==========================================================================
LOG_DIRECTORY_listener_name
Purpose: Controls the directory for where the log file is written
Default Value: Current directory where executable is started from.
Example: LOG_DIRECTORY_LISTENER=/oracle/traces
LOG_FILE_listener_name
Purpose: Specifies the filename where the log information is
written
Default Value: listener_name.log
Example: LOG_FILE_LISTENER=lsnr
TRACE_DIRECTORY_listener_name
Purpose: Control the destination directory of the trace file
Default Value: $ORACLE_HOME/network/trace
Example: TRACE_DIRECTORY_LISTENER=/oracle/traces
TRACE_FILE_listener_name
Purpose: Controls the name of the listener trace file
Default Value: LISTENER_NAME.CDF and LISTENER_NAME.DAT
Example: TRACE_FILE_LISTENER=lsnr
TRACE_LEVEL_listener_name
Purpose: Turns tracing on/off to a certain specified level
Default Value: 0 or OFF
* 0 or OFF - No trace output
* 4 or USER - User trace information
Available Values
* 10 or ADMIN - Administration trace information
* 16 - WorldWide Customer Support trace information
Example: TRACE_LEVEL_LISTENER=10
==========================================================================
|| NAMES.ORA Parameters ||
==========================================================================
NAMES.TRACE_DIRECTORY
Purpose: Indicates the name of the directory to which trace files
from a Names Server trace session are written.
Default
Value: platform specific
Example: names.trace_directory = complete_directory_name
NAMES.TRACE_FILE
Purpose: Indicates the name of the output file from a Names Server
trace session. The filename extension is always.trc
Default
Value: names
Example: names.trace_file = filename
NAMES.TRACE_LEVEL
Purpose: Indicates the level at which the Names Server is to be
traced.
Default Value: OFF
Example: names.trace_level = OFF
NAMES.TRACE_UNIQUE
indicates whether each trace file has a unique name, allowing
Purpose: multiple trace files to coexist. If the value is set to ON, a
process identifier is appended to the name of each trace file
generated.
Default
Value: OFF
Example: names.trace_unique = ON
names.trace_file = names_05.trc
==========================================================================
CMAN.ORA Parameters
==========================================================================
TRACING
Default
Value: NO
Example: TRACING = NO
References
7. listener.log 파일에 loggin정보를 남기지 않게 하는 방법이 있나요 ?
고객이 개발하여 사용중인 application에서 NET8을 이용하여 접속하거나 접속을
종료하는 경우 listener.log에 이와 관련된 정보가 남으며, 수 많은 사용자가
접속을 하게 되므로서 급속하게 listener.log 파일이 커져 $ORACLE_HOME이 있는
file system이 꽉 차서 데이터베이스가 hang이 되는 결과를 초래하는 경우가 있다.
고객들은 listener.log에 write할수 있는 메세지의 양에 제한을 두기를 원하는
경우가 있으나 이러한 기능은 제공되지 않는다. 하지만 listener의 logging은
ON 또는 OFF는 설정을 통해서 가능하다.
Net8에서는 listener.ora에 "LOGGING_(the listener name)=off"를 설정하게
되면 listener의 logging을 멈출 수 있다.
물론 설정후 listener stop후 재기동을 하셔야 변경된 paramerter에 의해
이 기능이 enable됩니다.
참고 : SQL*NET 2.3.x 에서도 이 parameter가 유효한가요 ?
물론 사용이 가능합니다. NET8에서 사용하는 것과 동일하게 parameter를
listener.ora에 설정함으로서 가능합니다.
EX)
LOGGING_LISTENER=OFF
이 parameter는 listener의 전체 logging을 disable하는 parameter로 일부만
여과하여 logging할 수 있는 기능은 아니다.
이 parameter는 NET8에 알려진 parameter로 SQL*NET 2.3.x manuals에 나와
있지는 않지만 정상적으로 사용할 수 있다.
Maybe you are looking for
-
I want to know the key for windows 8.1 pro 9600 which i UPgraded..after which my previous orginal version of windows 8.1 is asking for product key. can u help me stay with the orginal version of windows either with windows 8.1 or windows 8.1 pr0 9600
-
Is it possible to have two tax percentages attached to one SAP MM material?
Dear Guru's, Let me explain the challenge; the underlying company sells a finished product (A) containing different (let's say 2) materials (B and C) in a box. The product is bought from a vendor for an amount plus 21% VAT. The products in the box ha
-
HT201365 Don't like os7 on my ipad,how can I go back to 6.3os
Don't like the new upgrade os7 on my ipad slow eveything down don't know how to close apps to save battery life can I go back to os6.4?
-
Hello, I am new to C#, so I have maybe stupid question: How do I use something declared in a separate CS file. Let's say an array of strings. CLASS1.CS: using System; public class Class1 string[] Dictionary = new string[] { "one",
-
HT204368 my iphone 4s is not playing music through my motorola H15 BLUETOOTH
my music will not play through my bluetooth