How to configure logs to be sent for TFTP server !?

hi
I want to let the router or the switch to sends the log to TFTP server, how can I do that !?
including things like debug commands results
thanks,

You want to send the logs to the Syslog server..right? Use the logging command to do it.
logging x.x.x.x is the command.
Use the logging trap command to set the level of logging.
Router(config)#logging trap ?
  <0-7>          Logging severity level
  alerts         Immediate action needed           (severity=1)
  critical       Critical conditions               (severity=2)
  debugging      Debugging messages                (severity=7)
  emergencies    System is unusable                (severity=0)
  errors         Error conditions                  (severity=3)
  informational  Informational messages            (severity=6)
  notifications  Normal but significant conditions (severity=5)
  warnings       Warning conditions                (severity=4)
  <cr>
CF

Similar Messages

  • How to find out logs related to which server, If i have 2 WFE's in the farm. How to configure logs path?

    Hi,
    I got this doubt, when searching logs on the servers. I have 2 WFE's in my farm, I got an error from enduser. So in which WFE server i need to check the logs.
    How to configure logs path. Is it is possible to specify logs path on our own instead of 14 hive folder.
    Badri

    That is a really bad idea, especially with idle disconnects and other unreliability of CIFS.
    You should instead check out the command
    Merge-SPLogFiles which will allow you to combine ULS logs from multiple servers into a single file.
    You can certainly specify your own path, but the path must be available on all servers. For example, if you specified D:\Logs, D:\Logs must exist on all SharePoint servers within the farm.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • How to configure proxy services in OSB for Rest based services?

    how to configure proxy services in OSB for Rest based services implemented using Jersey (Rest).
    The Client need to contact OSB proxy servies by posting application/xml using jersey client and OSB proxy service will call the OSB business service.
    i would like to know how to get this request in OSB proxy service and send it to the business service and get the response back.

    I would suggest you refer to the below links:
    https://blogs.oracle.com/jeffdavies/entry/restful_services_with_oracle_s_1
    https://blogs.oracle.com/jamesbayer/entry/using_rest_with_oracle_service
    Hope this helps.
    Thanks,
    Patrick

  • How to configure multiple listeners to listen for the same instance.

    Hello everyone,
    I am running oracle database 11g and I want information regarding how to configure multiple listeners to listen for the same database instance. Actually I know how to configure more than one listener but the main thing that I am confused about is when we create listener.ora file, do we have to statically register the database instance with both the listeners or the instance will register itself with both the listeners.
    According to my knowledge the instance will register with the listener specified by LOCAL_LISTENER parameter and we cannot have more than one value for this parameter.
    Please only give detailed answers with example as I am tired of simple answers with details that I already know.

    Hello,
    Yes, it can make sense to have several listener for one Oracle instance. For instance you may have one listener for the applications another listener for DBA administration tasks as well as one listener dedicated to dataguard broker. It is not possible to have several listeners listening on the same IP and Port.
    By default the database try to automatically register to a listener on port 1521. To instruct the instance to register to a specifc list of listeners you can add in the init.ora the local_listener parameter with an alias definition:
    i.e
    local_listener=MY_SET_OFF_LISTENERS
    in your tnsname.ora add an entry called:
    MY_SET_OFF_LISTENERS_LOCAL= (ADDRESS_LIST=
    (ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1530))
    (ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1531))
    (ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1532))
    In this sample your instance will register to three listeners listening on respectively port 1530, 1531 and 1532
    If you want your clients can be balanced over the 3 listeners

  • How to configure the runtime and consolidation for a track in CMS.

    How to configure the runtime and consolidation for a track in CMS.
    I can see the track exists in CMS but the same doesnt pull up in the NWDS in the development configuration perspective.
    I compared the given track with the one which gets pulled up in NWDS. Theres something called runtime system and consolidation which isnt defined for the track which is invisible.
    Please advise , what are these required for. And how can we configure the same.

    The runtime systems are defined for a track to setup the Transport path for any code changes....the Consolidation system is usually defined as a Virtual system for the track and used for comparison and fixing any broken or Dirty DC's ....that means it's not used as a Runtime System for Deployment as compared to DEV,QAT and PROD used for Deployment...
    Hope it helps..
    Regards,
    Shikhil

  • How to configure an automatic vendor assignment for a purchase requisition

    hi guys,
    how to configure an automatic vendor assignment for a purchase requisition in sap
    Thanks in advance

    hi Swathi,
    Check these Links out
    http://help.sap.com/saphelp_erp2005/helpdata/en/75/ee11e655c811d189900000e8322d00/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/5e/372e3b7532394ce10000000a114084/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/4d/2b912a43ad11d189410000e829fbbd/frameset.htm
    Regards,
    Santosh

  • How to configure automatic printing of picklist for an OBD?

    Hi Experts,
    Can you pleae let me know how to configure automatic printing of picklist for an OBD?
    Thanks,
    Shetty

    1. To see whether picking list (EK00) is generated:
    VL02n open the delivery -> menu bar -> extrax -> picking output . 
    Is EK00 there? If not, it means that EK00 is not generated for this delivery.
    If EK00 is green -> it means that it has been printed.
    If it's yellow -> it means that it hasn't been printed yet. Now you have to goto VL70 to print it.
    2. To generate a picking output for one delivery, you have to do:
    [1] In customizing of shipping point, (img -> enterprise structure -> defination -> logistics execution ->shipping point), you have to set picking output  (TVST-KSCHL).
    [2] Item is relevant for picking, and plant/storage location is not assigned to a warehouse.
    [3] Set default print parameter in customizing.  (IMG -> Logistics Execution -> Shipping -> basic function -> output control ->define print parameter -> V4 -> for you picking output type -> assign default print parameter to shipping point ).
    Edited by: Harry Wu on Jul 23, 2010 3:07 AM

  • How can we define no of processors for a server

    How can we define no of processors for a server.on what factor that No of Processors depends? Is it based on
    1.Application type,
    2.No of transaction perday,
    3.No Of users connected simulatneoulsy

    You can also add the quality of the application to your list. A poorly writtern application cangobble up resources faster than you can spend.
    Also, the size of the database. Bigger size means increased memory, disk, and CPU.

  • How to configure Adobe LiveCycle designer on my SAP Server?

    Dear friends.
    I have installed SAP ECC 6.0 and Adobe LiveCycle designer ES 8.2 on my computer.
    Now I want to use Adobe LiveCycle designer in SAP by TCODE:SFP.
    Please tell me how to configure Adobe LiveCycle designer on my SAP Server in details.

    Hi MSReddy,
    You don't need to configure it on SAP server. It should be installed on you desktop only.
    Install ADLC on your desktop and open SFP it should work. If its not showing you the layout it means you are using wrong version of ADLC. Use ADLC downloaded from SAP Service market place only.(service.sap.com), else it will create problems.
    Regards,
    Vaibhav

  • How do we populate the SIGN_POST table for routing server

    Hi,
    How do we populate the SIGN_POST table for routing server…? We having the Street data network... we have populated the NODE, EDGE and PARTITION tables from street data. Is there any procedure available for populating the SIGN_POST table from street data? ARE there any predefined methods available?
    Thanks and Regards
    Aravindan

    This data has to come from the data provider.
    There are no procedures to populate this information, if this
    data is not available for your data set.
    For example, NAVSTREETS from NAVTEQ has this data as part
    of their street network data.
    siva

  • How to configure the ESS portal in ehp 6 server?

    Dear All,
    Pls advice me how to configure the ESS portal in my client server?
    I want to create new iviews ,pages,workset and link them all to R/3,with total configuration steps please.
    Thanks and Regards,
    Pradip

    hi pradeep ,
    which version r u using wdjava or abap ? ......if ur using java you have to do all in home page framework and if you are using with launchpad from   EHP5 better you can create it from launchpad by going to t -code LPD_CUST and select the ROLE:ESS and INSTANCE: MENU
    REFER Below............
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e09b3304-07d8-2b10-dbbf-81335825454f?QuickLink=index&overridelayout=true&38388417774934
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a?QuickLink=index&overridelayout=true&5003637159921
    http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=31476&bc=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/108c31e7-b6a7-2d10-3692-c1a9f7a5c4dc?overridelayout=true

  • How to configure the Oracle XSL Mapper for ‘schemaLocation’ attribute?

    In the Transformation_1.xsl I need to have the ‘schemaLocation’ attribute defined as such:
    <inc:CaseIncidentReport xsi:schemaLocation="http://caseincidentreport.com/1.0.4 CaseIncidentReport.xsd">
    This is fine as long as long as I don’t switch to the Design tab. When I switch to the Design tab, Oracle XSL Mapper regenerates the XSL file and renders the root element as
    <inc:CaseIncidentReport>
    Can some one tell me how to configure Oracle XSL Mapper for ‘schemaLocation’ attribute? I am using BPEL Designer/JDeveloper Version 10.1.2.1.0 (Build 1915)
    Thanks,

    What do you mean by normal import? Where can I include the 'schemaLocation' attribute in the Designer? I have no trouble adding the shemaLocation in the source tab but when I switch to the design tab it always stripe it off.
    How do I file an enhancement request? I see the the XSL Mapper needs improvements.
    Thanks,
    Nathan

  • How to configure ALE/IDOC in  nace for V3.

    Hi,
    Please let me  know how to configure ALE/IDOC output type in Nace and how to configure the message outputs.
            I require the steps to configure the above.
             Screen shots will also be helpful.
    Regards,

    Hi Somya,
    I have a little manual that explain how to create an outbound Idoc from a message class (for invoice).
    But it is in spanish, if you want give me a email address and I'll send you.
    Rgrds,
    Francisco Castillo

  • How to configure SharePoint 2010 / 2013 Search for SQL Database Contents and Oracle Database Contents?

    Hi All,
    We are planning to maintain the contents in SQL / Oracle. Could you please suggest anyone which is best for SharePoint 2010 / 2013 Search. How to configure the search for external content source?
    Thanks & Regards,
    Prakash

    This link explains supported and non supported scenarios to use Oracle for BCS
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/453a3a05-bc50-45d0-8be8-cbb4e7fe7027/oracle-db-as-external-content-type-in-sharepoint-2013
    And here is more on it
    http://msdn.microsoft.com/en-us/library/ff464424%28office.14%29.aspx 
    And here how you can connect Oracle to SharePoint for BCS functionality
    http://lightningtools.com/bcs/business-connectivity-services-in-sharepoint-2013-and-oracle-using-meta-man/
    Overall it seems SQL doenn't require any special arrangement to connect BCS to SharePoint.
    Regards,
    Pratik Vyas | SharePoint Consultant |
    http://sharepointpratik.blogspot.com
    Posting is provided AS IS with no warranties, and confers no rights
    Please remember to click Mark As Answer if a post solves your problem or
    Vote As Helpful if it was useful.

  • How to configure adobe forms in OMLV for printing picking slip

    Hello,
    I want to configure a adobe form in OMLV transaction. But there is no column for putting adobe forms.
    Can you tell me how do configure adobe forms for getting it printed from standard transaction whenever a transfer order is created.
    Thanks in advance.

    Hi Ajay,
    You are completely right that you cannot find anything with smartform in the customizing (OMLV). The reason for it: It is not there. It not even exists. Also the latest version of rlvsdr40 has nothing standard concerning smartforms.
    I do not know why it is really necessary to use adobe or smartforms.
    The only way is to build a new one (ZRLVSDR40). In that new one you have to use the sapscriptname (from OMLV)and treat it as a smartform- name.
    I hope my explanation helps. Success.
    Gr., Frank
    Below how a smartform is called (from invoice)
    determine smartform function module
      CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          formname           = lf_formname
        IMPORTING
          fm_name            = lf_fm_name
        EXCEPTIONS
          no_form            = 1
          no_function_module = 2
          OTHERS             = 3.
      IF sy-subrc <> 0.
      error handling
        retcode = sy-subrc.
        IF sy-subrc = 1.
          MESSAGE e001(ssfcomposer).
        ENDIF.
        IF sy-subrc = 2.
          MESSAGE e002(ssfcomposer) WITH lf_formname.
        ENDIF.
        PERFORM protocol_update.
      ENDIF.
      CALL FUNCTION lf_fm_name
        EXPORTING
          archive_index        = toa_dara
          archive_parameters   = arc_params
          control_parameters   = ls_control_param
          mail_recipient       = ls_recipient
          mail_sender          = ls_sender
          output_options       = ls_composer_param
          user_settings        = ' '
          is_nast              = nast
          is_vbdka             = vbdka
          is_addres            = addr_key
        IMPORTING
          document_output_info = document_output_info
          job_output_info      = job_output_info
          job_output_options   = job_output_options
        TABLES
          it_vbdpa             = tvbdpa    "Item information
          it_vbdpau            = tvbdpau   "Subitem numbers
        EXCEPTIONS
          formatting_error     = 1
          internal_error       = 2
          send_error           = 3
          user_canceled        = 4
          OTHERS               = 5.

Maybe you are looking for