How to configure Lookup and Value set

Hi All,
I have a doubt in look up as well as Vlaue set.
Can i create a new look up?
How can i create that and also need to configure that to my customize form.
Aslo wanta to do same thing in Vlaue set as well.
could any one please help me on this.
Thanks

Nanie,
You would have to duplicate a form under
Content-Management --> Form-Based Publishing > Forms Availability> folder setting
Please refer to this [help|http://help.sap.com/saphelp_nw70/helpdata/en/69/d96b9ba84611d5993600508b6b8b11/frameset.htm] document.
Also, for a quick reference refer to [this|https://forums.sdn.sap.com/message.jspa?messageID=5803864].
Good Luck!
Sandeep Tudumu

Similar Messages

How I configure a default value in an entity object?

Hi,
1:how I configure a default value in an entity object?
attribute type: DATE
I want to set the current date
...thanks

Override the create() action in your entity object implementation:
protected void create(AttributeList attributeList)
* This method should be subclassed to supply programmatic default values to
* various attributes of a new Entity Object. For example, to create a sequence.
* Instances of subclasses should call super.create() before performing any operations.
System.out.println("create(AttributeList attributeList) - start");
Date datSysdate = ( oracle.jbo.domain.Date) Date.getCurrentDate();
super.create(attributeList);
// set the default to today...
setHiredate( datSysdate );
System.out.println("create(AttributeList attributeList) - end");
}

How to configure modem and connect internet and play mp3

Hello friends
I am using sun solaris 8 intel edition .
I am using windowsXP,RedHat Linux and Sun Solaris 8 Intel Editon. I am using Internet on windows and linux platform but i cannot find any device configure tool in solaris 8 , So Please tell me how to configure modem and commands for connection internet and It is possible to play mp3 songs on solaris
Thaking in Advance
Piyush Patel
PI Solution

Look at the manual for pppd. Also take a look at OSS for sound card support (http://www.opensound.com) and xmms for your MP3 audio (http://www.xmms.org)

How do I cut and paste sets of lines for use in various Math questions?

How do I cut and paste sets of lines for use in various Math questions?

Thank you for your reply. My problem is much simpler than you are thinking. As a teacher I prepare sheets with random number generators.
EG. 256 + 389= ______    or         467
                                             - 384
       469 + 753= ______
or 5)750
On a PC I was able to start a page of A4 with one set and then drag and drop down and across the page.
On my Macbook I can get the numbers in but the lines do not copy. I asked at one of my One to One sessions and it had my 'trainer' stumped. He said he would make enquiries but so far no news. I am using Numbers.
I hope I have explained my 'problem' satisfactorily.

How to configure listener and tnsnames.ora on 10g version

how to configure listener and tnsnames.ora on 10g version

If you are on linux platform, on command prompt execute netmgr and configure listener fromt there. Or go to $oracle_home/network/admin/listner.ora write the following
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
For tnsnames.ora write the following
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
)

How to configure Queue and QueueConnectionFactory for a MDB

Hi *,
I want to send some messages from a session bean to a message driven bean. Therefore I'll use the default Queue (sapDemoQueue) and QueueConnectionFactory.
In the ServiceLocator of my SessionBean I do the lookup with following methods:
    public QueueConnectionFactory getQueueConnectionFactory() throws NamingException {
        if (queueConnectionFactory == null) {
            Object obj = ctx.lookup("jmsfactory/default/QueueConnectionFactory");
            queueConnectionFactory = (QueueConnectionFactory) obj;
        return queueConnectionFactory;
    public Queue getQueue() throws NamingException {
        if (queue == null) {
            Object obj = ctx.lookup("jmsqueues/default/sapDemoQueue");
            queue = (Queue) obj;
        return queue;
My Message Driven Bean is configure as followed:
ejb-jar.xml:
<message-driven>
<ejb-name>ExportBean</ejb-name>
<ejb-class>de.test.ejb.abschluss.ExportBean</ejb-class>
<transaction-type>Container</transaction-type>
<message-driven-destination>
    <destination-type>javax.jms.Queue</destination-type>
</message-driven-destination>
</message-driven>
ejb-j2ee-engine.xml:
<enterprise-bean>
<ejb-name>ExportBean</ejb-name>
<message-props>
    <destination-name>jmsqueues/default/sapDemoQueue</destination-name>
    <connection-factory-name>jmsfactory/default/QueueConnectionFactory</connection-factory-name>
</message-props>
</enterprise-bean>
I also create a jms-factories.xml and a jms-destination.xml.
EAR-Project/META-INF/jms-factories.xml:
<jms-factories>
<connection-factory>
    <factory-name>jmsfactory/default/QueueConnectionFactory</factory-name>
    <context-factory-type>
      <link-factory-name>jmsfactory/default/QueueConnectionFactory</link-factory-name>
      <initial-context-factory>com.sap.engine.services.jndi.InitialContextFactoryImpl</initial-context-factory>
      <provider-url>localhost</provider-url>
      <security-principal>Administrator</security-principal>
    </context-factory-type>
    <client-id></client-id>
</connection-factory>
</jms-factories>
EAR-Project/META-INF/jms-destination.xml:
<jms-destinations>
<destination>
    <connection-factory>jmsfactory/default/QueueConnectionFactory</connection-factory>
    <destination-name>jmsqueues/default/sapDemoQueue</destination-name>
</destination>
</jms-destinations>
How to configure correctly?
Does anybody an example how to configure?
Where may I download the example of the SAP documentation at http://help.sap.com/saphelp_nw04/helpdata/en/3d/41bee546e94ad48537f2cf06a29818/frameset.htm
Thank a lot,
Juergen

Hello Vesselin
My deployment descriptors:
ejb-jar.xml
          <session>
               <ejb-name>MonatsabschlussBean</ejb-name>
               <home>de.filiadata.leistungserfassung.ejb.abschluss.MonatsabschlussHome</home>
               <remote>de.filiadata.leistungserfassung.ejb.abschluss.Monatsabschluss</remote>
               <local-home>de.filiadata.leistungserfassung.ejb.abschluss.MonatsabschlussLocalHome</local-home>
               <local>de.filiadata.leistungserfassung.ejb.abschluss.MonatsabschlussLocal</local>
               <ejb-class>de.filiadata.leistungserfassung.ejb.abschluss.MonatsabschlussBean</ejb-class>
               <session-type>Stateless</session-type>
               <transaction-type>Container</transaction-type>
               <resource-ref>
                    <res-ref-name>FdlbQueueConnectionFactory</res-ref-name>
                    <res-type>javax.jms.QueueConnectionFactory</res-type>
                    <res-auth>Container</res-auth>
               </resource-ref>
               <resource-env-ref>
                    <resource-env-ref-name>FdlbQueue</resource-env-ref-name>
                    <resource-env-ref-type>javax.jms.Queue</resource-env-ref-type>
               </resource-env-ref>
          </session>
          <message-driven>
               <ejb-name>ExportBean</ejb-name>
               <ejb-class>de.filiadata.leistungserfassung.ejb.abschluss.ExportBean</ejb-class>
               <transaction-type>Container</transaction-type>
               <message-driven-destination>
                    <destination-type>javax.jms.Queue</destination-type>
               </message-driven-destination>
               <resource-ref>
                    <res-ref-name>FdlbQueueConnectionFactory</res-ref-name>
                    <res-type>javax.jms.QueueConnectionFactory</res-type>
                    <res-auth>Container</res-auth>
               </resource-ref>
               <resource-env-ref>
                    <resource-env-ref-name>FdlbQueue</resource-env-ref-name>
                    <resource-env-ref-type>javax.jms.Queue</resource-env-ref-type>
               </resource-env-ref>
          </message-driven>
ejb-j2ee-engine.xml
          <enterprise-bean>
               <ejb-name>MonatsabschlussBean</ejb-name>
               <session-props/>
          </enterprise-bean>
          <enterprise-bean>
               <ejb-name>ExportBean</ejb-name>
               <message-props>
                    <destination-name>FdlbQueue</destination-name>
                    <connection-factory-name>FdlbQueueConnectionFactory</connection-factory-name>
               </message-props>
          </enterprise-bean>
jms-factories.xml
<jms-factories>
<connection-factory>
    <factory-name>FdlbQueueConnectionFactory</factory-name>
    <context-factory-type>
      <link-factory-name>jmsfactory/default/XAQueueConnectionFactory</link-factory-name>
      <initial-context-factory>com.sap.engine.services.jndi.InitialContextFactoryImpl</initial-context-factory>
      <provider-url>localhost</provider-url>
      <security-principal>Administrator</security-principal>
      <security-credentials></security-credentials>
    </context-factory-type>
</connection-factory>
</jms-factories>
jms-destinations.xml
<jms-destinations>
<destination>
    <connection-factory>FdlbQueueConnectionFactory</connection-factory>
    <destination-name>FdlbQueue</destination-name>
</destination>
</jms-destinations>
And I'll put mit ServiceLocator:
    public QueueConnectionFactory getQueueConnectionFactory() throws NamingException {
        if (queueConnectionFactory == null) {
            Object obj = ctx.lookup("java:comp/env/FdlbQueueConnectionFactory");
            queueConnectionFactory = (QueueConnectionFactory) obj;
        return queueConnectionFactory;
    public Queue getQueue() throws NamingException {
        if (queue == null) {
            Object obj = ctx.lookup("java:comp/env/FdlbQueue");
            queue = (Queue) obj;
        return queue;
Kind Regards,
Juergen

How to configure AD and Token server (over radius) authentication

Dear forum,
I have a scenario where users should be allowed network access after their have given their AD credentials and a token (Blackshield Token server).
The token server speaks over radius to the cisco ACS appliance. I have managed to get users authenticated by means of their AD credentials. I am how ever not able to use both means in order to have a successfull authentication.
Does anyone have a configuration example for this scenario? Any help would be greatly appreciated.
Thanks!!!

Hi,
I have had two deployments using this form of authentication.
Just so we are on the same page, the token servers that I have integrated connect to an Active Directory server running NPS (MS radius), then the user will have to send their password+token and the token software will check the account password, and then the token to see if the users succeeds.
Let me know if that is the design of your software. If it is, then all you need to do is configure the token software to run on radius and then set the policies up from there. From the network device standpoint it just needs to point to the radius server.
Thanks,
Tarik Admani
*Please rate helpful posts*

OWB 10gR2 : How to configure ctl and log locations for Sql*Loader mappings?

Hi all,
I'm using OWB 10gR2 to load data in tables with Sql*Loader mappings.
In my project I have a datafile module and an Oracle module.
When creating an sql*loader mapping in the oracle module, there is two properties for this mappings that I want to modify. The first is Control File Location and the second is Log File Location. Values for those properties are equal to the data file module location. When trying to change those values I can only chose "Use module configuration location".
Somebody knows how to configure those properties with different locations as the one of the flat file module?
What I want to do is to store the data file in one directory, and control file and log file in other directories.
Thank you for your help.
Bernard

Hi,
You're right, my problem is that the dropdown only show the location associated with the flat file location even if I have other file locations created in the design repository.
The good news is that I have found the solution to solve the problem :
1) Edit the file module and in tab "Data locations", add the locations you want to use for control file and log file.
2) Open configuration window of the mapping and then the dropdown for properties Control File Location and Log File Location show new locations
I have tested my mapping after changing those properties and it's working.
Bernard

How to configure, push and test Idoc from XI to R/3

Assuming mapping between imported Idoc and some file structure is fine ,I have to configure XI and R/3 for pushing Idocs from Xi to r/3. I have to make sure they talk.
-I have done this long time ago for pushing Idocs from R/3 to XI but I wonder if it is same procedure or it is different ?
-Can someone tell me - how to configure both for this purpose partner profiles , logical systems etc ?
-And also after configurations , how I can check if Idocs is received from Xi and the entire process is successful?
-does it make difference the type of Idocs during the configurations?
-Are the test for success same for all type Idocs?
Thanks all !
Jon

Here are the steps:
===========================
First - Maintain the Sender R/3 System:
SM59 : Create a RFC destination to XI
WE21 : Create a TRFC Port ->Specify the RFC Destination Created
BD54 : Create a Logical System for the Idoc Receiver
WE20 : Create Partner Profile ->Maintain Outbound and the Inbound Parameters
Second - Log on to XI System:
SM59 : RFC Destination for Sender System
IDX1 : Create the port to get Idoc Metadata from Sender System ( The Port Name must match the port name in the idoc header - Usually in format SAP<System ID>. eg. SAPID1 [Optional Step. Not mandatory]
IDX2 : Maintain the Idoc Metadata. This is needed only by XI, and not by other SAP systems. IDX2 is needed because XI needs to construct IDoc-XML from the IDoc. No other SAP system needs to do that.
To Enable Acknowledgement:
SXMB_ADM ->Integration Engine Configuration ->Specific Configuration ->Add New entry -> Select parameters as:
Category: RUNTIME
Parameters: ACK_SYSTEM_FAILURE
Current Value: 1
Additional References
Ale Configuration for pushing Idocs form SAP to XI
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi

Default DFF based of user login and value set

Hi All,
My requirement is: Default the value of a DFF based on a value set and the person who logs in.
My value set is:
Person A - Value 1
Person B - Value 2
So, if person 1 logs in - the DFF value should be Value 1.
If person 2 logs in - the DFF value should be Value 2.
How can this be achieved?
Alex

You can default the value by using SQL in the default type for the particular DFF segments. You can get the user id from $PROFILES$.USER_ID. You can derive the employee id / name from the user id (provided you do indeed tag an employee to the FND User definition)

How to configure modem and airport extreme?

I have a TP-Link modem/wireless router from the provider.
My Airport Extreme is connected to the modem.
The wireless router in the modem has been switched off.
There is a 'double NAT' warning from the AE.
How to configure the TP-L modem and the AE router to get the best results?
Many thanks if some one could help me there.
Gr. Lance

Turning off the wireless on the TP-Link router does not make it a simple modem.
You need to configure the AirPort Extreme in Bridge Mode to operate correctly with another router on the network.
Open AirPort Utility and click on the AirPort Extreme icon, then click Edit
Click the Network tab a the top of the window
Make sure that the setting for Router Mode is "Off (Bridge Mode)"
Click Update to save the new settings
Wait 30 seconds for a green light on the AirPort Extreme, then power off the complete network....all devices....in any order you want.
Wait a minute, then start the TP-Link modem/router first and let it run a full minute
Start the AirPort Extreme next the same way
Keep starting devices one at at a time the same way until the entire network is back up.

How to configure oracle and ms-access db

Hi All,
I have a requirement to push data from the oracle to ms access. My oracle database is on the Unix server and ms access is on my local desktop. Is there a way to configure if so how to configure both the db? Basically I am wanted to make the ms access visible to oracle so that I can use the Heterogeneous package. Please let me know if there are any different ways.
my oracle version is
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
ms-access 2007
Thanks in advance.

Hi,
You could use the Database Gateway for ODBC (DG4ODBC) to do this. It uses a third party ODBC driver to make the connection to MS-Access so the best option would be to install it on the Windows machine where Access is running and use the Microsoft Access driver.
Otherwise, you could install on Unix where Oracle is running but I don't think there is third party Access driver for Unix.
The following note available in My Oracle Support describes the setup on Windows -
Note.466225.1 How to Setup DG4ODBC (Oracle Database Gateway for ODBC) on Windows 32bit
You should install the latest 11.2 DG4ODBC and this note has pointers to the download sites -
Note.1083703.1 Master Note for Oracle Gateway Products
DG4ODBC can be installed standalone without an RDBMS being installed.
Regards,
Mike

[SOLVED] How to configure prosody and jitsi to work together?

Hi,
I want to use prosody to connect several jitsi accounts on different computers on a LAN. I have followed the Prosody page in our wiki to set up Prosody and some user accounts. The service starts and ss -tul indicates that it is listening on the expected ports. I have created the missing key and certificate files expected by the default setup and placed them in /etc/prosody/certs.
I have created the account foo@localhost using prosodyctl adduser foo@localhost.
In jitsi I have created an XMPP account (foo@localhost) on the same host as prosody. The account appears but it fails to connect to the server. Jitsi displays error messages on the console which indicates that the server does not support TLS connections even though these are enabled in the prosody configuration file (and lua51-sec is installed).
I have tried numerous variations of disabling encryption in both prosody and jitsi but I either get the same error message or jitsi simply hangs while trying to connect to the server.
So far the only thing that I've been able to find that deals specifically with prosody and jitsi is an episode of the Linux Action Show from last year that skimps on the details of the setup. The various online documentation that I've found seems to be for an older version or Prosody (e.g. Host entries in the configuration file).
Does anyone have a similar setup working with the latest versions of Prosody and Jitsi? If so, please share your configurations.
edit
I went through the Prosody wiki page again today and managed to get it working. I think my problem was in misconfigured paths for the SSL server certificates in the VirtualHost section.
Last edited by Xyne (2014-08-13 00:35:51)

So, i tried both ways but it still didn't work.
anrxc: i didn't know i could still prevent DNS leak without privoxy. Privoxy always blocked flash animations and videos (like youtube) here. I'll try to set up this better tomorrow when i have more time.
By the way, after following your guide, i got this when executing /usr/bin/tor:
Jan 10 19:29:16.993 [notice] Tor v0.2.1.21. This is experimental software. Do not rely on it for strong anonymity. (Running on Linux x86_64)
Jan 10 19:29:16.994 [warn] Skipping obsolete configuration option 'Group'
Jan 10 19:29:16.995 [notice] Initialized libevent version 1.4.12-stable using method epoll. Good.
Jan 10 19:29:16.995 [notice] Opening Socks listener on 127.0.0.1:9050
Jan 10 19:29:16.995 [notice] Opening Socks listener on 192.168.0.1:9050
Jan 10 19:29:16.995 [warn] Could not bind to 192.168.0.1:9050: Cannot assign requested address
Jan 10 19:29:16.995 [notice] Closing partially-constructed listener Socks listener on 127.0.0.1:9050
Jan 10 19:29:16.995 [warn] Failed to parse/validate config: Failed to bind one of the listener ports.
Jan 10 19:29:16.995 [err] Reading config failed--see warnings above.
Last edited by ILoveJapaneseGirls (2010-01-10 22:00:12)

How to configure rz20 and dswp in solution manager ?

Hi all,
I have configured the ccms agent and ccms ping in the satellite system and all the connectivity with solution manager.
but then i haven' got the idea how to configure the template in the RZ20 and DSWP ?
Please advise on document / blog etc regarding this kind of configuration ?
Thank you and Best Regards
Fernand

Hi
check below link:
DSWP: http://help.sap.com/saphelp_smehp1/helpdata/en/8e/3ad6f807e147669036d2a6aed597aa/content.htm
RZ20: http://help.sap.com/saphelp_nw04/Helpdata/EN/17/550c404a435509e10000000a1550b0/content.htm
Thanks
Sunny

How to configure apache and weblogic in windows 2000

i am novice,
i want to configure apache and weblogic in windows 2000
weblogic version is 6.1
apache version is 2.0
how to do?

George,
I would take the following 'first steps'
1)Install Apache20 on your Windows machine following the Apache online documentation
http://httpd.apache.org/docs-2.0/misc/tutorials.html
2)Make sure you can 'serve up' static HTML content from your Apache Server
3)Install Weblogic Server per our online documentation
http://edocs.bea.com/wls/docs61/install/index.html
4)Also, make sure you can 'serve up' both static and dynamic (e.g., JSP) content
directly from WLS server
5)Once you have both of the above 'sanity' checks attempt to configure a simple
proxy by ppath or mime type via our online documentation
http://edocs.bea.com/wls/docs61/adminguide/apache.html#103803
Chuck Nelson
DRE
BEA Technical Support

How to configure Lookup and Value set

Similar Messages

Maybe you are looking for