How to configure macbook for Linksys print server

I need to configure my Macbook for use with a linksys WPS54G wireless print server. I've been using it for months with my PC, but as I recall, the install CD basically said "contact Apple to use with a mac." Where to start, what to do?
Thanks all!

Does this page contain anything useful?
(21902)

Similar Messages

  • How to configure solman for Workflow BW Server.

    Dear Experts,
    How to configure Solution Manager workfolw for BW sever. We have done for R/3 systen . it working fine.
    Regards,
    Anand Mehrotra.

    Hi
    might be this helps, this is the basic set up if you use bw server
    [http://wiki.sdn.sap.com/wiki/display/Basis/BIReportingforSolutionManagerEWA_ConfigGuide|http://wiki.sdn.sap.com/wiki/display/Basis/BIReportingforSolutionManagerEWA_ConfigGuide]
    jansi

  • How to configure SSL for Oracle Weblogic Server

    Hi,
    Please help me to configure SSL in oracle weblogic server.
    If possible, please provide step by step to configure SSL.

    this should help
    http://weblogic-wonders.com/weblogic/2010/05/19/configuring-ssl-on-weblogic-server-custom-identity-custom-trust/

  • How to configure network for Plex Media Server

    How do I configure my router for accessing Plex Media Server running on my home PC?
    The router ActionTec MI424-WR Rev F adds an entry in the port forwarding (port 32400), but I am unable to access the system.

    Did you check the Plex documentation for ALL the ports you need to forward?
    http://wiki.plexapp.com/index.php/Frequently_Asked​_Questions#Where_do_I_find_the_documentation.3F
    What network ports do I need to allow through my firewall to enable access?
    TCP 32400 (for access to the Plex Media Server) [required]
    UDP 1900 (for access to the Plex DLNA Server)
    UDP 32469 (for access to the Plex DLNA Server)
    UDP 5353 (for Bonjour/Avahi if you are using these products for service discovery) [recommended for iOS clients]

  • Can't print from Mac to DeskJet D1530 over Linksys print server

    The print job and printer both hang when trying to print to the DeskJet D1530.
    I am using the drivers downloaded directly from HP and specifically for Snow Leopard.
    When connected directly via USB, the printer installs itself and prints reliably.
    However, this is a shared printer. The Mac has a wireless-G connection to a Linksys router, the router is connected to a Linksys print server via Ethernet. Then the printer is connected via USB to the print server.
    I have 2 Windows laptops that print reliably via this configuration.
    With the Mac, I configured it to use LPR over the IP address of the print server. It seems to connect to the print server and appears to be communicating with the printer. It even reports the ink levels in the cartridges. But when a print job is sent to the printer, the print status reports "Sending data file (0 bytes)" and the job just hangs unless a "cancel -a" is sent via terminal. It also prevents any other system from printing unless the printer and the print server are power cycled. I have occasionally coaxed a job out of the printer after the print server is power-cycled, however from the Mac's printer status, the job never completes and any subsequent print jobs will hang. I have to reboot the Mac to completely clear the print queue.
    I have look online for instructions on configuring the printer, but all of them so far have yielded the same result.
    This is not exactly an exotic setup, and it works with Windows systems. What am I doing wrong?

    It usually comes as a surprise to Windows users that there are two kinds of print drivers on OS X. The older type are called monolithic drivers because they have everything in one package - postscript interpreter and communication device (USB) driver. With this type, the manufacturer gets to include exactly the components needed for the printer. The driver you got from HP is this type, and it is limited to USB Only.
    To do network printing to a USB printer, you need a driver that allows more than just USB direct connection. You need a CUPS driver. One CUPS driver is Gutenprint, included in OS X by Apple. It may not include your model yet.
    Get updated Gutenprint or hpijs drivers from:
    http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx
    or a commercial CUPS driver, printfab from:
    http://www.printfab.net

  • How to configure SMTP for iCloud?

    I have never used the Mail program on my macs. I started using Eudora in 1995 and when Mail came along some years later, i didn't take to it, it didn't have the functionality i needed and enjoyed. Fast forward to a couple days ago, my Snow Leopard MacBook is wearing out and i got a new MacBook Pro running Mountain Lion.  When i was setting up the new computer, i thought iCloud would be configured automatically. It wasn't because i have a couple of different Apple IDs but i think that is straightened out now and i'm signed in using the me.com email address and have my calendars and contacts syncing with iphone and my other computer. Mail is working, but only for my me.com email address which i rarely use.  I mainly use a gmail address.
    I don't want to use Mail and i don't want mail to be downloaded to it.  That happened on my other computur, so that i had tens of thousands of messages in a program i never open and don't use. So i somehow turned it off so it no longer gets the mail from my other accounts.  i don't want to receive email in Mail. But because i can't use Eudora in Mountain Lion, i need a new email client. Today, i downloaded and installed Mail Mate, i want to try it out.  When I tried to use Mail mate to send an email i got a message saying "No SMTP server configured for iCloud." i googled how to configure SMTP for iCloud and what i found said it configures automatically. So i don't know what to do. I went to ICloud in system preferences and i don't see anything i can do there. 
    Is there anything i can get it to do to configure automatically?   All my software is up to date, if that makes a difference.

    i was persistently googling search terms for this problem and came across a link that gave information to the effect that for non Apple email clients, SMTP has to be configured manually, and the settings were provided. I entered them into Mail Mate and now it works.  So thankfully, this problem is solved.

  • Linksys Print Server Problem

    NM Ver. 5.2.8354.0-Pure0
    Platform Ver. 11.1.8350.0
    Windows XP SP3
    Linksys Print Server WPS54G
    Linksys Router, RangePlus Wireless G
    When I run the Linksys Print Server software to add a computer, nothing happens.  When I run the software to locate the print server, nothing happens.
    Network Magic recognizes the computer, the router and the print server.  I can access the print server admin from NW Magic, and the computer, but not the router.
    I am printing remote from other computers on the wireless nw, but cannot remote print from this computer.
    I have uninstalled and reinstalled NW Magic, and added the exception to the firewall.
    Thanks for any help.

    Hi bobtex, are you using Windows Firewall or a 3rd party one like McAfee, Norton or ZoneAlarm?
    My Cisco Network Magic Configuration:
    Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
    Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
    Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
    Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
    Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

  • How to configure apache for ssl in windows platform

    hi all,
    can anyone help me expalin how to configure apache for ssl in windows platform.

    George,
    I would take the following 'first steps'
    1)Install Apache20 on your Windows machine following the Apache online documentation
    http://httpd.apache.org/docs-2.0/misc/tutorials.html
    2)Make sure you can 'serve up' static HTML content from your Apache Server
    3)Install Weblogic Server per our online documentation
    http://edocs.bea.com/wls/docs61/install/index.html
    4)Also, make sure you can 'serve up' both static and dynamic (e.g., JSP) content
    directly from WLS server
    5)Once you have both of the above 'sanity' checks attempt to configure a simple
    proxy by ppath or mime type via our online documentation
    http://edocs.bea.com/wls/docs61/adminguide/apache.html#103803
    Chuck Nelson
    DRE
    BEA Technical Support

  • Printing on an established network with a linksys print server and an HP

    I am really tired of this. After 4 months of searching through discussions, I still cannot get my new Mac Pro to print to my HP printer on a linksys print server. Nothing I've tried through the discussions works. Every other PC in the network can do so. I would call someone or open a chat, but I can't find either of those on the Apple sites either. Someone please help before I give up on Apples!

    Okay, I was able to complete the Adding of a printer and selecting the PPD using "Other". Here's some lines from the cups error log (more than 5 lines), but it's all Greek to me.
    07:11:54:44 -0500] Started filter /usr/libexec/cups/filter/cgpdftops (PID 2624) for job 4.
    I [10/Jun/2007:11:54:44 -0500] Started filter /usr/libexec/cups/filter/pstops (PID 2625) for job 4.
    I [10/Jun/2007:11:54:44 -0500] Started filter /usr/libexec/cups/filter/foomatic-rip (PID 2626) for job 4.
    I [10/Jun/2007:11:54:44 -0500] Started backend /usr/libexec/cups/backend/ipp (PID 2627) for job 4.
    E [10/Jun/2007:11:54:46 -0500] PID 2626 stopped with status 3!
    I [10/Jun/2007:11:54:46 -0500] Hint: Try setting the LogLevel to "debug" to find out more.
    E [10/Jun/2007:11:54:47 -0500] [Job 4] Unable to get printer status (client-error-bad-request)!
    E [10/Jun/2007:11:54:48 -0500] load_job: Unable to queue job for destination "http://127.0.0.1:0/printers/HPOfficejet"!
    E [10/Jun/2007:11:54:48 -0500] LoadJobs: Job error; deleting file "c00003"
    I [10/Jun/2007:12:09:29 -0500] Saving printers.conf...
    I [10/Jun/2007:12:09:29 -0500] Printer '192_168_1102' stopped by ''.
    E [10/Jun/2007:12:09:29 -0500] PID 2627 stopped with status 1!
    I [10/Jun/2007:12:09:29 -0500] Hint: Try setting the LogLevel to "debug" to find out more.
    I [10/Jun/2007:12:18:37 -0500] Saving printers.conf...
    I [10/Jun/2007:12:18:37 -0500] Printer '192_168_1102' started by ''.
    I [10/Jun/2007:12:18:37 -0500] Started filter /usr/libexec/cups/filter/cgpdftops (PID 2642) for job 4.
    I [10/Jun/2007:12:18:37 -0500] Started filter /usr/libexec/cups/filter/pstops (PID 2643) for job 4.
    I [10/Jun/2007:12:18:37 -0500] Started filter /usr/libexec/cups/filter/foomatic-rip (PID 2644) for job 4.
    I [10/Jun/2007:12:18:37 -0500] Started backend /usr/libexec/cups/backend/ipp (PID 2645) for job 4.
    I [10/Jun/2007:12:18:38 -0500] Adding start banner page "none" to job 5.
    I [10/Jun/2007:12:18:38 -0500] Adding end banner page "none" to job 5.
    I [10/Jun/2007:12:18:38 -0500] Job 5 queued on '192_168_1102' by 'jackpayonk'.
    E [10/Jun/2007:12:18:38 -0500] PID 2644 stopped with status 3!
    I [10/Jun/2007:12:18:38 -0500] Hint: Try setting the LogLevel to "debug" to find out more.
    E [10/Jun/2007:12:18:40 -0500] [Job 4] Unable to get printer status (client-error-bad-request)!
    E [10/Jun/2007:12:50:44 -0500] [Job 4] Unable to get printer status (client-error-bad-request)!
    E [10/Jun/2007:12:55:02 -0500] [Job 4] Unable to get printer status (client-error-bad-request)!
    E [10/Jun/2007:12:57:25 -0500] [Job 4] Unable to get printer status (client-error-bad-request)!
    I [10/Jun/2007:12:58:49 -0500] Adding start banner page "none" to job 6.
    I [10/Jun/2007:12:58:49 -0500] Adding end banner page "none" to job 6.
    I [10/Jun/2007:12:58:49 -0500] Job 6 queued on '192_168_1102' by 'jackpayonk'.
    I [10/Jun/2007:13:00:23 -0500] Saving printers.conf...
    I [10/Jun/2007:13:00:23 -0500] Printer '192_168_1102' stopped by ''.
    E [10/Jun/2007:13:00:23 -0500] PID 2645 stopped with status 1!
    I [10/Jun/2007:13:00:23 -0500] Hint: Try setting the LogLevel to "debug" to find out more.
    Sorry for the length. On to the windows part now.

  • How to configure webutil in oracle application server 10g (9.0.4)?

    hi,
    i want to configure webutil for oracle application server 10g(9.0.4).
    how should i start?
    i have read the webutil mannual.it is bit tricky.
    i want step by step configuration.
    Any sort of help is appriciateable.
    Regards,
    abbasyazdani

    hi,
    In webutil directory structure,there r four folders,
    {color:#0000ff}doc
    java
    server
    webutil{color}
    and there are three files.
    {color:#0000ff}webutil.pll,webutil.old and create_webutil_db
    {color}
    In webutil mannual,it is written that we should extract this folder to forms90.
    But in forms90, there are {color:#0000ff}server and java folders.
    {color:#000000}should i replace forms90's sever and java folder with webutil's server and java folder?
    what should i do for this ?
    regards
    abbasyazdani
    {color}{color}

  • How to configure Sun Java System Application Server Enterprise Edition 8.1

    hi all,
    How to configure Sun Java System Application Server Enterprise Edition 8.1 to my IDE..( jstudio)
    I have installed jes for my windows system.. so that i have removed platform version of Application Server..
    I try to add the Enterprise application Server (Sun Java System Application Server Enterprise Edition 8.1) to JStudio IDE..
    but i couldn't;

    Configuring your IDE to integrate with Sun App Server is something you probably will have to ask in some sort of JStudio forum. Other than for Netbeans, Eclipse, or possibly IntelliJ IDEA, you might not have much luck answering an IDE question here. I could be wrong though. Maybe somebody will have an answer for you and set me straight.

  • How to configure wokflow for MRP generated  & manually created PR

    Dear Gurus,
    I have to customize SAP workflow for releasing Purchase requisitions. I will be using enhancement M06B0001 for my own role resolution.
    I have some questions regarding workflow
    1)     How to configure workflow for MRP generated & manually created PR?What are the steps? what are the limitations in doing so?
    2)     Since we are facing the problem of insufficient user license ,How to send notifications to NON SAP users?(We have thought of creating a Z table for the same)
    Looking forward to your reply,
      Thanks in advance,
    Best regards
    Tushar
    SAP MM Consultant

    Dear Mike,
    Thanks for your reply, & sorry for not responding on time.
      Here are my constraints:
    1) Not a single component of HR module will be implemented.(Project management decision:-()
    2) Number of user licenses are less, considering the workflow users.(Hence we have thought of creating Z table for employee nos. & EMAIL IDs ,& this table will be accessed by using M06B0001 user exit.(It is still in development phase. Truely speaking, dont know whether it will work or not).If this works out ,then I believe, record from SU01 will not be used (Please correct me here).
    3)We have 2 instances on development server.(in short,2 separate installations on same server by creating additional instance). What are the implications of this particular system landscape on workflow? Whether workflow will work or not??:-(, :-(.
    The reason I asked you 3rd question is , As soon as 2 nd instance was created on development server, Short Dumps are coming while running transactions of Workflow builder.(SWDD & PFTC).It is giving error" Table is unknown or does not exist". Description of error says"The current program"SAPLSWF3 had to be terminated because one of the statements could not be executed."
    "An SAP Open SQL Statement contains a table that does not exist in the database or is not listed in the ABAP Data dictionary.The Table is "SWF_WFPDSC" or another table is accessed in the statement.
    Program=SAPLSWF3
    Include=LSWF3U05
    Row=22
    Module name=SWF_WFP_REPOSITORY_CONTENT_GET
    The same dump is coming while accessing SWF_WFPVW table from SE16.
    Request to Mike & all of you, help me in this regard.
      Thanks in Advance,
    Regards,
    Tushar

  • Epson Stylus Photo R1800 on Linksys Printer server

    hi, I'm currently running Tiger 10.4.11 on my power book G4 and trying to connect to a network printer on a Linksys Print Server (PSUS4). The printer connected to the server is an Epson Stylus Photo R1800.
    I'm able to print perfectly from my computer via USB direct, but when I try to find the printer as a network printer I can't locate it.
    The print utilities finds the location of printer from the Linksys server, but none of my drivers are coming up that are compatible to the printer when it finds it like that.
    When the printer is turned on the print browser cannot find it at all, but when it's turned off the browser comes up with the name Linsys gave it to be discovered. It says it's connected via AppleTalk, but when I click on it to try to add the driver doesn't come up. BUT it's the correct driver when I connect manually.
    What am I doing wrong? I was on the phone with tech support for an hour and 24 minutes only to be told (when transferred to a specialist) that they aren't trained for this kind of thing, neither is Linksys (who I spoke to for 30 minutes). I read the thread on the similar issue to this and don't think that it's a driver issue, but a print server issue, what do you think??
    thanks for any help.
    -melissa

    Driver issue - the driver provided by Epson was written for USB only (well, maybe Firewire too for the 1800). You will have to use either the Gutenprint driver or the printfab driver for network printing:
    http://gimp-print.sourceforge.net/MacOSX.php3
    http://www.printfab.net
    Sounds like your print server will work via appletalk -- but, if you want to try IP printing, don't forget to enter the correct queue name for the LPD and IPP protocols.

  • Powerbook and Linksys print server

    Hello All,
    I have a question which I believe I know what he answer is. I have a new Powerbook. right now, I am using a Linksys Print Server connected to a Epson inkjet printer. This is networked in my home windows environment. When you add a new pc etc, the Epson drivers are installed first than the Print server drivers. However, it seems there are no Mac driver etc for the Print server per Linksys. So basically, am I stuck with adding a dedicated printer to the powerbook or taking the print server out of the equasion here and letting one of my windows pc be the print server. No an option that I really wanted.
    Thanks,
    AlRoz

    Al,
    Before you do all that, try some of the options Tiger gives you. In the Applications folder there is a Utilities Folder. In there there is a Printer Setup Utility. Open it, and click Add. At the top there is a Default Browser and IP Printer. Click IP Printer. In this window you should be able to set up the connections so your powerbook can talk to your printer thru the ethernet printer server.
    Hope this helps
    Bill Kline
    The MacFanatic

  • Need assistance how to configure RDS on a standalone Server 2012 R2 not joined to a domain

    Hi,
    I need help on how to configure RDS on my standalone server 2012 R2 that is not joined to a domain.  I would also like to see the counterpart of Terminal Services Manager.
    I am familiar with Terminal Services on my old Server 2003 which I migrating.
    Thank you for your assistance.
    Sincerely,
    Ramon

    Hi,
    the dedicated RDS/TS forum is here:
    http://social.technet.microsoft.com/Forums/en-US/home?forum=winserverTS
    Some useful articles, which seem to answer your questions:
    http://support.microsoft.com/kb/2833839
    http://ryanmangansitblog.com/2013/10/30/deploying-a-rdsh-server-in-a-workgroup-rds-2012-r2/
    http://support.risualblogs.com/blog/2014/03/10/setting-up-a-2012-r2-rds-gateway-for-a-workgroup/
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Maybe you are looking for