How to Configure Mail in ECC5.0

Dear All,
Please guide how to configure Mail in ECC5.0
i have Activate / enabled  SMPT  using  the T-code :  SICF
using Transaction : SCOT
for SMTP Connection :
mail host :  localhost
mail port : 25
Code Page :  ????????????  what should i give  i have given 1100 SAP  internal  (correct or wrong) Please guide
Supported Address Type:
Selected Internet
what should i give in "Address Area"  and "output format for SAP documents"
when i am sending a mail using : SWBP  and checking in SOST message error 272 i am getting.
Regards
Shankar

Dear all,
we are not using Exchange Server.
we enabled the Port 25 . we are able to telnet to the mail server.
Using SICF activate SMTP port.
when i am trying to send  using SBWP t-code : getting
"error during send process " when we check further  " you do not have a sender address in the  choosen communication method".
Regards
Shankar.

Similar Messages

  • How to configure Mail Services in B1

    Hi All,
    I want to cinfigure the mail services in SAP B1 currently I am using SAP 2007 SP00 PL 12 My client wants that the daily reports and the Sales order should be mailed by B1 to cuntomer mail id. PLease tell the process to how to configure mail services in B1.
    Thanks & Regards
    pankaj Sharma.

    Hi Pankaj Sharma,
    The suggestion above would be a good solution to you.  However, if you do not want to use this add-on, you may just configure SBO-Mailer to perform the task. You may check all available setting for the mailer and read through Administrator Guide for how to set it up.
    Thanks,
    Gordon

  • How to configure mail using portal collaboration

    hi Guys..,
    pls tel me
    how to configure mail using portal collaboration and its uses..
    thanks
    regards
    kamal

    Hi,
    Two Configure Email, first
    You have to create a System for Groupware through System Administration ->System Configuration -> system LandScape
    Then create a Groupwaretransport
    implement SSO between your Mail server and your EP...
    and finally
    Create a Mail service...
    More Info is available at below link..
    http://help.sap.com/saphelp_nw04/helpdata/en/7c/6a469702474146a8ef2f97fe880b2f/frameset.htm
    and have a look at the thread raised by be on Calender Configuration...
    Collaboration calendar : No transport has been configured for the calendar
    Regards,
    Srinivas

  • How to configure Mail app on mountain lion to not download all my emails in hotmail server. I need only just 1-2 weeks

    How to configure Mail app on mountain lion to not download all my emails in hotmail server. I need only just 1-2 weeks

    Try going to the web based site and see if you can set up a temporary folder there. Move anything you don't want to download to that folder.

  • How to configure mail service in DRM 11.1.2.3.500

    How to configure mail service in DRM 11.1.2.3.500.
    There is a feature in Workflow Models to Notify users by sending mail.
    Can anyone help me find from where to configure mail service.

    Hi,
    If you open up the Configuration Console on the DRM Server you should be able to navigate to the second tab called "Host Machines".
    From there, select SMTP Server - and enter the details for your SMTP server. You've now configured DRM to send emails... now you just need to add it into your workflows...

  • TS3276 how to configure Mail ?

    Hi !
    How to configure Mail only to fetch a specific amount of messages on its first use?
    I'm using Mac OS X Lion 10.7.4 with Mail v. 5.2.
    Thanks a lot!

    Hi !
    How to configure Mail only to fetch a specific amount of messages on its first use?
    I'm using Mac OS X Lion 10.7.4 with Mail v. 5.2.
    Thanks a lot!

  • How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?

    Hi,
    I am new in Oracle Enterprise Manager so please tell me How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?
    Thanks,
    Sagar Pawar.

    Hi Sagar Pawar ,
    First you need to set the email notification :
    Kindly review :
    12c Cloud Control: Steps to Configure Incident Rules to Send Notifications or
    Manage Events / Incidents / Problems (Doc ID 1368036.1)
    12c Cloud Control: Steps to Configure Email Notification Method (Doc ID 1368262.1)
    Regards
    Ansari

  • How to configure Mail Alerts in SAP R/3 System.

    Hi,
      I want to send mails to the users when alert occurs.How to configure that mail alers in R/3 system.pls send me the related information and links.
    Regards,
    Kiran.

    HI
    I think there is no standard functionality in sap u need to develop with abaper help with proper logic
    if it is for venijula s_alr_87009936  try this t.code
    Thanks & Regards
    Phaneendra
    Edited by: phaneendra Reddy on Jun 12, 2009 9:24 AM

  • How to configure mail server

    Hi All,
    we are in a process of configure mail server in one of our sap instance.
    i have done the following settings,
    1. In t-code sicf      under virtual host SAPCONNECT, 
    2.   I  have added  in host data * : *
    3.under handler list CL_SMTP_EXT_SAPCONNECT.
    4. now in scot i have added my deault domain under "settings -> default domain " <company name.com>
    5.on double clicking on SMTP i have added the following entries
      SMTP CONNECTIONS : mail host :  smtp.gmail.com
                                               port : 465
                                           code page : 0
    SUPPORT ADDRESS TYPE : i have set internet address to *
    did i miss any of the steps in configuring the SMTP mail server.
    after sending the mail when i look in to t code  sost the message number displays "672"
    please advice how can i  configure mail server for incoming and outgoing
    Thanks in advance,
    Vardhan

    Hello Vardhan,
    I suggest you to go through the below links and cross check the configuration.
    http://help.sap.com/saphelp_nw04/helpdata/en/66/9c25413fabef23e10000000a155106/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
    http://help.sap.com/saphelp_470/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
    Thanks,
    Siva Kumar
    Edited by: Siva Kumar Arivinti on Jan 19, 2012 3:16 AM

  • How to configure mail client to only download headers(titles) of emails

    Hi there?
    I have 10 different email accounts (for some weird reasons that i think irrelevant fir this question), and i want to use Mail app as my main client. iCloud, hotmail, yahoo, gmail, other imap and pop etc.
    Now the mail client is trying to download everything from the servers which is gigs of storgae space. I need to configure mail to only download titles of emails, not the entire email with attachments etc.
    I can do that very simply in MS Outlook, and even in the old outlook express client.
    How can i do that in Mavericks mail client please? I looked everywhere
    Thanks

    Try going to the web based site and see if you can set up a temporary folder there. Move anything you don't want to download to that folder.

  • How to configure Mail Users aliases

    Hello,
    i have installed OS X Lion Server and after after a short while i was very dissapointed.
    One of my goals was to get a easy GUI to adminstrate my mail Server.
    So, after installing Server App i configure and activate a Mail Server.
    Then i wanted to add aliases to my User and tried to start The Workgroup Manager.
    Within i searched for a the mail tab in order to configure the User Aliases.
    But there was no Mail tab there, so i have to create the aliases through the command line (edit /etc/postfix/aliases, newaliases).
    I cannot believe that there is no gui for configuring mail users. Is this really so or is it in another place or have i forgotten to check or to do something else.
    How do you setting up and configure mail and mail users in OS X Lion?
    I am looking forward to you answers and expiriences,
    Greetings,
    Peter

    @menzbua
    You can configure mail aliases, the same way you did in Mac OS 10.6 Server... Make sure you have Installed Server Tools for 10.7. Run Workgroup Manager. Under the User, Select Short names on the 2nd or 3 line add [email protected] etc .etc

  • How to configure Mail to use different ports for POP and SMTP?

    I am trying to configure Mail for my AT&T account. It requires me to configure POP (incoming) mail for port 995, and SMTP (outgoing) mail for port 465. However there doesn't seem to be an option to configure different ports for these. Is that correct, or am I missing something?
    Alternatively can I configure two accounts, one for POP incoming and one for SMTP outgoing? My incoming POP account does work, but in configuring an outgoing account I still have to configure a POP server name and that will not work for the outgoing port.
    Any advice on how to solve this would be appreciated.

    Understand. It is really quite easy to do in Mail, too. Kappy told you how to set up the smtp piece. I gave you pop info. These two things are on different panels within Account Preferences.
    To recap his and my posts
    SMTP:
    In Mail Prefs, click on the accounts icon. Click on your att yahoo account on the list. On the right of the window, in the lower portion, you see an smtp server menu. Open it and select edit. Select Edit Server, then click on its Advanced tab. Set up port 465 with SSL.
    POP:
    This is on a different panel in Mail PRefs Accounts. Now in Mail Prefs, click on the accounts icon. Click on your att yahoo account on the list. On the right of the window, you see three tabs, acc't info, mbox behaviors, and Advanced. This is where things are different than for smtp. You are going to configure stuff on a different "advanced" panel than where you were for the smtp stuff. Click on the advanced tab. There is a field for port with a SSL checkbox next to it and an authentication drop down menu. Check the box and it should quickfill change from 110 to 995. Autentication drop down is probably already default to password.
    Did you visit the URL I gave you previously? It even gives you screen shots.

  • How to configure mail option in newly added discussion forum portlet.

    Hi,
    i added a discusion forum portlet in Oracle App Server portal. here all the features are working except mail notification facility.
    Please suggest me, how to configure that?
    Dhananjay

    If you cannot see the device then it is not attached or mapped by multipath.
    Are you using the same kernel on both servers?

  • How to configure mail server for subscription

    Hi,
    I want to test subscription. My problem is how to configure the mail server.
    As to my understanding, we need first configure mail server, then the user can choose "Subscribe" in the Details screen of a folder.
    My steps are:
    1. In KM - CM - Utilities - Channels, specify SMTP server, userId and password.
    2. In KM - CM - Utilities - Channel originators, set the Original address for notificator.EMAIL.
    3. In KM - Collaboration - Groupware Transport - Mail Transport, specify SMTP server and sent message folder.
    After that, when I choose a user and click "Send email", it failed saying "Failed to communicate with SMTP server when sending the email.".
    Could anyone tell me what's wrong with my configuration, or what should I do to make subscription work?
    Thanks,
    Ray

    Hi Vineeth,
    Thanks for help.
    According to your steps:
    1. set up a mail transport and making notification and mailing service active.
       In System admin - KM - CM - Global services, I've enabled Inbox, Mailing and Notification services.
      In KM - CM - Collaboration - Groupware Transport, I've set up a mail transport:
      Name: JavaMailTransport
      SMTP Server: smtp.yahoo.com
      Sent message folder: /documents
      System alias name: mytransport
    2. Give everyone read permission on notifications in KM.
      Where can I set user's permission on notifications? I think you mean folder /etc/notifications, but I don't know how to set permissions.
    3. Check if proper id's are maintained in users profile.
      How to do this?
    Thanks for help~~
    Regards,
    Ray

  • How to configure mail connection

    Dear Experts,
    I received an application and I want to set a automatic email system to send feedback to applicant . When I create a planned activity that its type is 001 (mail confirmation of receipt). Then I click on Email-letter button, an error "No entry made for type of communication" appeared. I created 1 entry (is email address) in infotype 0105 (Comunication) for this applicant.I have adready set Mail Connection (through IMG->..->Recruitment...->Applicant Activities-> Mail Connection).
    Can You tell me Where are my mistakes and the rule to run an automatic email system.
    Thanks for your help
    Best regards,
    Edited by: Sushi300509 on Oct 27, 2009 4:23 AM

    Does it matter if I have to access the OWA url using a trailing folder name? I access OWA like so, https://owa.example.com/owa, I know it's a bit redundant, but I don't know how to make mail aware of that, or even if it's a problem? If I leave off the URL I can connect but not authenticate, with the URL it's obviously an invalid hostname. Anyone familiar with this issue?

Maybe you are looking for