How to configure Mail Services in B1
Hi All,
I want to cinfigure the mail services in SAP B1 currently I am using SAP 2007 SP00 PL 12 My client wants that the daily reports and the Sales order should be mailed by B1 to cuntomer mail id. PLease tell the process to how to configure mail services in B1.
Thanks & Regards
pankaj Sharma.
Hi Pankaj Sharma,
The suggestion above would be a good solution to you. However, if you do not want to use this add-on, you may just configure SBO-Mailer to perform the task. You may check all available setting for the mailer and read through Administrator Guide for how to set it up.
Thanks,
Gordon
Similar Messages
-
How to configure mail service in DRM 11.1.2.3.500
How to configure mail service in DRM 11.1.2.3.500.
There is a feature in Workflow Models to Notify users by sending mail.
Can anyone help me find from where to configure mail service.Hi,
If you open up the Configuration Console on the DRM Server you should be able to navigate to the second tab called "Host Machines".
From there, select SMTP Server - and enter the details for your SMTP server. You've now configured DRM to send emails... now you just need to add it into your workflows... -
How to configure mail using portal collaboration
hi Guys..,
pls tel me
how to configure mail using portal collaboration and its uses..
thanks
regards
kamalHi,
Two Configure Email, first
You have to create a System for Groupware through System Administration ->System Configuration -> system LandScape
Then create a Groupwaretransport
implement SSO between your Mail server and your EP...
and finally
Create a Mail service...
More Info is available at below link..
http://help.sap.com/saphelp_nw04/helpdata/en/7c/6a469702474146a8ef2f97fe880b2f/frameset.htm
and have a look at the thread raised by be on Calender Configuration...
Collaboration calendar : No transport has been configured for the calendar
Regards,
Srinivas -
How to configure proxy services in OSB for Rest based services?
how to configure proxy services in OSB for Rest based services implemented using Jersey (Rest).
The Client need to contact OSB proxy servies by posting application/xml using jersey client and OSB proxy service will call the OSB business service.
i would like to know how to get this request in OSB proxy service and send it to the business service and get the response back.I would suggest you refer to the below links:
https://blogs.oracle.com/jeffdavies/entry/restful_services_with_oracle_s_1
https://blogs.oracle.com/jamesbayer/entry/using_rest_with_oracle_service
Hope this helps.
Thanks,
Patrick -
Hi,
I need to configure different windows services alerts in SCOM 2012. Below are some of the windows services I need to monitor through SCOM.
Serivce: Windows Management Instrumentation
Service: Netlogon
Service: Remote Procedure Call (RPC)
Service: Server Service
Service: Terminal Services
Service: Windows Time
Service: Workstation
Service : WWW Publishing Service
Could some one please assist or share me the details, how to configure these services for windows agent servers.
Thanks..
Regards, Rajeev ParambilHi,
A certain set of services are monitored by default on all agents:
DNS Client
DHCP Client
RPC
Workstation
Server
For all the other services you could create a service monitor.
A nice blog series outlining this process can be found here: http://www.bictt.com/blogs/bictt.php/2011/03/16/scom-monitoring-a-service-part1
It's doing common things uncommonly well that brings succes. Check out my SCOM link blog:
SCOM link blog -
How to configure the services(WDA) in ESS with EHP7
Hi Experts,
I have a requirement to configure ESS/MSS in R/3 . fisrt time am going to configure the ESS/MSS in R/3 with EHP7.currently we are using
ECC6.0 EHP7 with SP 2 and portal 7.4 can any one help me out which business functions need to be activate and which components need to activate.
How to configure the service in launch pad with WDA.please guide me the step by step procedure.
Please share the config guide if anyone have.hi sap scn ,
Tips & Recommendations for customizing ESS Menu (WD ABAP) - ess launchpad
Summary of configuration options in ESS Personal Information scenario -personal information
go to t-code lpd_cust see ROLE ESS and INSTNACE MENU ...Clcik it and copy to Z launchpad and drag and drop the services which u want and use it
if any other revert back again -
How to Configure Mail in ECC5.0
Dear All,
Please guide how to configure Mail in ECC5.0
i have Activate / enabled SMPT using the T-code : SICF
using Transaction : SCOT
for SMTP Connection :
mail host : localhost
mail port : 25
Code Page : ???????????? what should i give i have given 1100 SAP internal (correct or wrong) Please guide
Supported Address Type:
Selected Internet
what should i give in "Address Area" and "output format for SAP documents"
when i am sending a mail using : SWBP and checking in SOST message error 272 i am getting.
Regards
ShankarDear all,
we are not using Exchange Server.
we enabled the Port 25 . we are able to telnet to the mail server.
Using SICF activate SMTP port.
when i am trying to send using SBWP t-code : getting
"error during send process " when we check further " you do not have a sender address in the choosen communication method".
Regards
Shankar. -
How to configure Mail app on mountain lion to not download all my emails in hotmail server. I need only just 1-2 weeks
Try going to the web based site and see if you can set up a temporary folder there. Move anything you don't want to download to that folder.
-
How to configuration web service in bw that I can open query in explore ?
Hi
Can anyone tell me how to configuration web service that when I click " luanch in web browser "in BEX Anaylzer , Display Query on the web in BEx query Designer open rsplan modeling on web ,what parameter will be configuration ,give me step to step to configuration
thanks very muchconfigure a messager service and some paramers
thanks very much! -
TS3276 how to configure Mail ?
Hi !
How to configure Mail only to fetch a specific amount of messages on its first use?
I'm using Mac OS X Lion 10.7.4 with Mail v. 5.2.
Thanks a lot!Hi !
How to configure Mail only to fetch a specific amount of messages on its first use?
I'm using Mac OS X Lion 10.7.4 with Mail v. 5.2.
Thanks a lot! -
How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?
Hi,
I am new in Oracle Enterprise Manager so please tell me How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?
Thanks,
Sagar Pawar.Hi Sagar Pawar ,
First you need to set the email notification :
Kindly review :
12c Cloud Control: Steps to Configure Incident Rules to Send Notifications or
Manage Events / Incidents / Problems (Doc ID 1368036.1)
12c Cloud Control: Steps to Configure Email Notification Method (Doc ID 1368262.1)
Regards
Ansari -
How to configure mail server for subscription
Hi,
I want to test subscription. My problem is how to configure the mail server.
As to my understanding, we need first configure mail server, then the user can choose "Subscribe" in the Details screen of a folder.
My steps are:
1. In KM - CM - Utilities - Channels, specify SMTP server, userId and password.
2. In KM - CM - Utilities - Channel originators, set the Original address for notificator.EMAIL.
3. In KM - Collaboration - Groupware Transport - Mail Transport, specify SMTP server and sent message folder.
After that, when I choose a user and click "Send email", it failed saying "Failed to communicate with SMTP server when sending the email.".
Could anyone tell me what's wrong with my configuration, or what should I do to make subscription work?
Thanks,
RayHi Vineeth,
Thanks for help.
According to your steps:
1. set up a mail transport and making notification and mailing service active.
In System admin - KM - CM - Global services, I've enabled Inbox, Mailing and Notification services.
In KM - CM - Collaboration - Groupware Transport, I've set up a mail transport:
Name: JavaMailTransport
SMTP Server: smtp.yahoo.com
Sent message folder: /documents
System alias name: mytransport
2. Give everyone read permission on notifications in KM.
Where can I set user's permission on notifications? I think you mean folder /etc/notifications, but I don't know how to set permissions.
3. Check if proper id's are maintained in users profile.
How to do this?
Thanks for help~~
Regards,
Ray -
How to configure Mail Alerts in SAP R/3 System.
Hi,
I want to send mails to the users when alert occurs.How to configure that mail alers in R/3 system.pls send me the related information and links.
Regards,
Kiran.HI
I think there is no standard functionality in sap u need to develop with abaper help with proper logic
if it is for venijula s_alr_87009936 try this t.code
Thanks & Regards
Phaneendra
Edited by: phaneendra Reddy on Jun 12, 2009 9:24 AM -
How to configure Security services in OSB 11g..
We are integration OSB with BANK application, we will be using SSL certificate for the same.
Please help how to configure security policy in OSB.
I checked below link policy defination
http://tim.blackamber.org.uk/?p=825
but in OSB proxy service we are not able see Policy button.
Please help.
Thanks,
MihirPlease post your query in SOA Suite forum -
SOA Suite
Regards,
Anuj -
Hi All,
we are in a process of configure mail server in one of our sap instance.
i have done the following settings,
1. In t-code sicf under virtual host SAPCONNECT,
2. I have added in host data * : *
3.under handler list CL_SMTP_EXT_SAPCONNECT.
4. now in scot i have added my deault domain under "settings -> default domain " <company name.com>
5.on double clicking on SMTP i have added the following entries
SMTP CONNECTIONS : mail host : smtp.gmail.com
port : 465
code page : 0
SUPPORT ADDRESS TYPE : i have set internet address to *
did i miss any of the steps in configuring the SMTP mail server.
after sending the mail when i look in to t code sost the message number displays "672"
please advice how can i configure mail server for incoming and outgoing
Thanks in advance,
VardhanHello Vardhan,
I suggest you to go through the below links and cross check the configuration.
http://help.sap.com/saphelp_nw04/helpdata/en/66/9c25413fabef23e10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
http://help.sap.com/saphelp_470/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
Thanks,
Siva Kumar
Edited by: Siva Kumar Arivinti on Jan 19, 2012 3:16 AM
Maybe you are looking for
-
How can I Control ITunes on my Desktop from my Laptop without Express???
i have a g4 powerbook with airport card and a brand new imac. i have bose speakers (companion 5). they use a usb connection. bose and apple employees have suggested that the audio quality will decrease drastically if i used an adaptor to connect the
-
How to - customize datasource by means of 'Function module' via 'RSO2' ?
Wilson, the topic of Function Module extractors is well documented in the forums - please search the forums before posting +__Hi,Expert:__+ +__Could you please kindly advise me how to customize datasource by 'Function module',__+ +__and which aspect
-
Relinking Graphics Problem - I think!
When I open a document and need to relink any graphics I click the relink button, navigate to the folder stated in the information part of the links panel, locate the file and InDesign relinks that file and any others in that folder. My question is t
-
To update Delivery date in PR through IW32
Hi All, I have a requirement to update Reqt.date whihc i achieved by writitng the logic to update RESB table in WORKORDERupdate BADI. whenever i create new order or change a existing orders and add components and try to save. the Reqt date get change
-
Hi All, I have a workspace in both windows and unix. The windows workspace produces pdf's just fine, but in unix the same workspace prints pdf's with all section overlapping each other. Is there any setting need to be done. Thanks.