How to configure Mail Users aliases
Hello,
i have installed OS X Lion Server and after after a short while i was very dissapointed.
One of my goals was to get a easy GUI to adminstrate my mail Server.
So, after installing Server App i configure and activate a Mail Server.
Then i wanted to add aliases to my User and tried to start The Workgroup Manager.
Within i searched for a the mail tab in order to configure the User Aliases.
But there was no Mail tab there, so i have to create the aliases through the command line (edit /etc/postfix/aliases, newaliases).
I cannot believe that there is no gui for configuring mail users. Is this really so or is it in another place or have i forgotten to check or to do something else.
How do you setting up and configure mail and mail users in OS X Lion?
I am looking forward to you answers and expiriences,
Greetings,
Peter
@menzbua
You can configure mail aliases, the same way you did in Mac OS 10.6 Server... Make sure you have Installed Server Tools for 10.7. Run Workgroup Manager. Under the User, Select Short names on the 2nd or 3 line add [email protected] etc .etc
Similar Messages
-
How to configure mail service in DRM 11.1.2.3.500
How to configure mail service in DRM 11.1.2.3.500.
There is a feature in Workflow Models to Notify users by sending mail.
Can anyone help me find from where to configure mail service.Hi,
If you open up the Configuration Console on the DRM Server you should be able to navigate to the second tab called "Host Machines".
From there, select SMTP Server - and enter the details for your SMTP server. You've now configured DRM to send emails... now you just need to add it into your workflows... -
How to configure Mail Services in B1
Hi All,
I want to cinfigure the mail services in SAP B1 currently I am using SAP 2007 SP00 PL 12 My client wants that the daily reports and the Sales order should be mailed by B1 to cuntomer mail id. PLease tell the process to how to configure mail services in B1.
Thanks & Regards
pankaj Sharma.Hi Pankaj Sharma,
The suggestion above would be a good solution to you. However, if you do not want to use this add-on, you may just configure SBO-Mailer to perform the task. You may check all available setting for the mailer and read through Administrator Guide for how to set it up.
Thanks,
Gordon -
How to configure mail using portal collaboration
hi Guys..,
pls tel me
how to configure mail using portal collaboration and its uses..
thanks
regards
kamalHi,
Two Configure Email, first
You have to create a System for Groupware through System Administration ->System Configuration -> system LandScape
Then create a Groupwaretransport
implement SSO between your Mail server and your EP...
and finally
Create a Mail service...
More Info is available at below link..
http://help.sap.com/saphelp_nw04/helpdata/en/7c/6a469702474146a8ef2f97fe880b2f/frameset.htm
and have a look at the thread raised by be on Calender Configuration...
Collaboration calendar : No transport has been configured for the calendar
Regards,
Srinivas -
How to Configure Mail in ECC5.0
Dear All,
Please guide how to configure Mail in ECC5.0
i have Activate / enabled SMPT using the T-code : SICF
using Transaction : SCOT
for SMTP Connection :
mail host : localhost
mail port : 25
Code Page : ???????????? what should i give i have given 1100 SAP internal (correct or wrong) Please guide
Supported Address Type:
Selected Internet
what should i give in "Address Area" and "output format for SAP documents"
when i am sending a mail using : SWBP and checking in SOST message error 272 i am getting.
Regards
ShankarDear all,
we are not using Exchange Server.
we enabled the Port 25 . we are able to telnet to the mail server.
Using SICF activate SMTP port.
when i am trying to send using SBWP t-code : getting
"error during send process " when we check further " you do not have a sender address in the choosen communication method".
Regards
Shankar. -
How to configure Mail app on mountain lion to not download all my emails in hotmail server. I need only just 1-2 weeks
Try going to the web based site and see if you can set up a temporary folder there. Move anything you don't want to download to that folder.
-
TS3276 how to configure Mail ?
Hi !
How to configure Mail only to fetch a specific amount of messages on its first use?
I'm using Mac OS X Lion 10.7.4 with Mail v. 5.2.
Thanks a lot!Hi !
How to configure Mail only to fetch a specific amount of messages on its first use?
I'm using Mac OS X Lion 10.7.4 with Mail v. 5.2.
Thanks a lot! -
How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?
Hi,
I am new in Oracle Enterprise Manager so please tell me How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?
Thanks,
Sagar Pawar.Hi Sagar Pawar ,
First you need to set the email notification :
Kindly review :
12c Cloud Control: Steps to Configure Incident Rules to Send Notifications or
Manage Events / Incidents / Problems (Doc ID 1368036.1)
12c Cloud Control: Steps to Configure Email Notification Method (Doc ID 1368262.1)
Regards
Ansari -
How to configure Mail Alerts in SAP R/3 System.
Hi,
I want to send mails to the users when alert occurs.How to configure that mail alers in R/3 system.pls send me the related information and links.
Regards,
Kiran.HI
I think there is no standard functionality in sap u need to develop with abaper help with proper logic
if it is for venijula s_alr_87009936 try this t.code
Thanks & Regards
Phaneendra
Edited by: phaneendra Reddy on Jun 12, 2009 9:24 AM -
How to configure mail server for subscription
Hi,
I want to test subscription. My problem is how to configure the mail server.
As to my understanding, we need first configure mail server, then the user can choose "Subscribe" in the Details screen of a folder.
My steps are:
1. In KM - CM - Utilities - Channels, specify SMTP server, userId and password.
2. In KM - CM - Utilities - Channel originators, set the Original address for notificator.EMAIL.
3. In KM - Collaboration - Groupware Transport - Mail Transport, specify SMTP server and sent message folder.
After that, when I choose a user and click "Send email", it failed saying "Failed to communicate with SMTP server when sending the email.".
Could anyone tell me what's wrong with my configuration, or what should I do to make subscription work?
Thanks,
RayHi Vineeth,
Thanks for help.
According to your steps:
1. set up a mail transport and making notification and mailing service active.
In System admin - KM - CM - Global services, I've enabled Inbox, Mailing and Notification services.
In KM - CM - Collaboration - Groupware Transport, I've set up a mail transport:
Name: JavaMailTransport
SMTP Server: smtp.yahoo.com
Sent message folder: /documents
System alias name: mytransport
2. Give everyone read permission on notifications in KM.
Where can I set user's permission on notifications? I think you mean folder /etc/notifications, but I don't know how to set permissions.
3. Check if proper id's are maintained in users profile.
How to do this?
Thanks for help~~
Regards,
Ray -
Hi All,
we are in a process of configure mail server in one of our sap instance.
i have done the following settings,
1. In t-code sicf under virtual host SAPCONNECT,
2. I have added in host data * : *
3.under handler list CL_SMTP_EXT_SAPCONNECT.
4. now in scot i have added my deault domain under "settings -> default domain " <company name.com>
5.on double clicking on SMTP i have added the following entries
SMTP CONNECTIONS : mail host : smtp.gmail.com
port : 465
code page : 0
SUPPORT ADDRESS TYPE : i have set internet address to *
did i miss any of the steps in configuring the SMTP mail server.
after sending the mail when i look in to t code sost the message number displays "672"
please advice how can i configure mail server for incoming and outgoing
Thanks in advance,
VardhanHello Vardhan,
I suggest you to go through the below links and cross check the configuration.
http://help.sap.com/saphelp_nw04/helpdata/en/66/9c25413fabef23e10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
http://help.sap.com/saphelp_470/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
Thanks,
Siva Kumar
Edited by: Siva Kumar Arivinti on Jan 19, 2012 3:16 AM -
How to configure mail client to only download headers(titles) of emails
Hi there?
I have 10 different email accounts (for some weird reasons that i think irrelevant fir this question), and i want to use Mail app as my main client. iCloud, hotmail, yahoo, gmail, other imap and pop etc.
Now the mail client is trying to download everything from the servers which is gigs of storgae space. I need to configure mail to only download titles of emails, not the entire email with attachments etc.
I can do that very simply in MS Outlook, and even in the old outlook express client.
How can i do that in Mavericks mail client please? I looked everywhere
ThanksTry going to the web based site and see if you can set up a temporary folder there. Move anything you don't want to download to that folder.
-
How to configure Mail to use different ports for POP and SMTP?
I am trying to configure Mail for my AT&T account. It requires me to configure POP (incoming) mail for port 995, and SMTP (outgoing) mail for port 465. However there doesn't seem to be an option to configure different ports for these. Is that correct, or am I missing something?
Alternatively can I configure two accounts, one for POP incoming and one for SMTP outgoing? My incoming POP account does work, but in configuring an outgoing account I still have to configure a POP server name and that will not work for the outgoing port.
Any advice on how to solve this would be appreciated.Understand. It is really quite easy to do in Mail, too. Kappy told you how to set up the smtp piece. I gave you pop info. These two things are on different panels within Account Preferences.
To recap his and my posts
SMTP:
In Mail Prefs, click on the accounts icon. Click on your att yahoo account on the list. On the right of the window, in the lower portion, you see an smtp server menu. Open it and select edit. Select Edit Server, then click on its Advanced tab. Set up port 465 with SSL.
POP:
This is on a different panel in Mail PRefs Accounts. Now in Mail Prefs, click on the accounts icon. Click on your att yahoo account on the list. On the right of the window, you see three tabs, acc't info, mbox behaviors, and Advanced. This is where things are different than for smtp. You are going to configure stuff on a different "advanced" panel than where you were for the smtp stuff. Click on the advanced tab. There is a field for port with a SSL checkbox next to it and an authentication drop down menu. Check the box and it should quickfill change from 110 to 995. Autentication drop down is probably already default to password.
Did you visit the URL I gave you previously? It even gives you screen shots. -
How to configure mail option in newly added discussion forum portlet.
Hi,
i added a discusion forum portlet in Oracle App Server portal. here all the features are working except mail notification facility.
Please suggest me, how to configure that?
DhananjayIf you cannot see the device then it is not attached or mapped by multipath.
Are you using the same kernel on both servers? -
How to configur the user to get notified when IDOC goes in to error?
Hello Experts,
Please tell me how to notify the users when IDOC goes in to error...
please tell me where we can configure this thing,,
Thanks
VenkateshVenkatesh,
The best technique for this would be configuring Workflow. Whenever an Idoc goes into an error it will go to the specified user. You have to set it up and can have more than 1 user and also depending on what Idoc failed you can have different users.
Example ORDERS05 failed, let it go to the inbox of the Order team , SHPORD failed , put it in the mailbox of the WM team lead etc.
Read up the workflow documentation of SAP which is really good.
You can do other things, like have a simple email etc. but all will need program changes.
Usually I have seen some teams have the most simple mechanism.
Have a peron check the Idoc that failed and then notify the teams.
Of course 1 person can be only responsible for lets say a few Idoc types.
I have worked in such a environment where I used to look at the Order to cash Idocs ( Orders/Invoices/bank payments etc.)
Also you train the users to look at Idocs and recognise and fix errors, so they are not totally dependent on you.
But Workflow is the best solution according to me.
Regards
Maybe you are looking for
-
How to show catalog items with Approval Status:Pending in a Content Search Webpart
How to show catalog items with Approval Status:Pending in a Content Search Webpart using cross site publishing. Thanks in advance.
-
Sparks when connecting MacBook Air charger to the wall
Hi everybody. Today when I plugged in the MacBook Air power charger to the wall in my room I saw and heard sparks for the first time and the I noticed that the connecter ends of the charger have burnt a little (I see small black dents) but the charge
-
JSlider in JMenu problem.
I have recently switched to using jdk1.5.0_04 and have some problem. I have a JSlider contained in a JMenu. But I cannot drag the slider anymore, this worked in java 1.4. I can only click on a tick on the slider and the sldier will move to the locati
-
Losing calendar entries when I sync
HELP! Since I downloaded the latest version of the Blackberry Desktop Software, I lose 100's of calendar entries from several years ago each time I sync with MS Outlook 2007. Can't figure out where the settings are to specify date ranges. Thanks i
-
How do I change an image but keep the effects from the previous image?
I made a simple slideshow with 4 photos that are individually set to fade in and out in order. I have saved this as a new file and want to change the 4 images to different ones, but still keep the same effects settings. Seems like this should be re