How to configure Manage Access in Administration page?

I installed Adobe Reader Extension and is able to login into Administration page. Can any one teach me how to configure the Manage Acess - especially on LDAP Server portion?
I tried to put local server name in LDAP server then press Apply. Error pop-out:
Validation Error
You must correct the following error(s) before proceeding:
Internal Error : Error 2505: A problem occured while creating a controller -- Cause: com.adobe.server.AuthenticateException: The LDAP host cannot be contacted, please check your settings.
Can any one help me on this?
Thank you.
Wong

you should add
PlsqlNetServiceNameFormat=cn=asdb,cn=oraclecontext NetServiceNameFormat
in your dtds.conf
and you also need modify your ldap.ora fiile which stored in your portal/infra server directory. the directory maybe looks like .../ldap/admin/ldap.ora

Similar Messages

How to configure MS-Access 2010 DB details on weblogc using DBAdapter

Hi Experts,
Can any one help me how to configure MS-Access 2010 DB details on weblogic 11g using DBAdapters.
If you provide step by step instuction, it is very usful to me.
If you have any screen shots you can any one please send a file to my mail ID:[email protected]
My Requirement:
I need to fetch 3 columns data (product code/ serial numer and serial status) from MS-Access 2010 and store it on oracle 11g, for that I have wrote a web service code and I need to make it automation. I don't have any IDEA, how to make this web serevice as automation (automation means, when ever new record stored in MS-Access data I need to fetch newly created record from MS-Access 2010 and send it to Oracle 11g)
Note: MS- Access 2010 present at vision system and Oracle 11g installed in linux server.
Thanks,
Phani

Hi,
I am also facing the same issue, not sure about what url to use. And also the login webservice doesn't work while I am testing using http://localhost:81/RTC/RTCService.asmx. It always throwing the following error
" Unable to cast COM object of type 'RTCLib.RTCClientClass' to interface type 'RTCLib.IRTCClient'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{07829E45-9A34-408E-A011-BDDF13487CD1}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE))."
Is the current owc_lcs.zip support MS Office Communication Server 2007?
Please share the configuration step if anyone already integrated OCS 2007.
Thanks,
-Mukesh.
Edited by: user9127933 on Feb 19, 2010 4:05 AM

How to configure to access internet on Solaris 10 SPARC

Dear All,
how to configure to access internet on Solaris 10 SPARC.
Thanks and regards,
Heng

What you need is just an IP address on your network interface and configure dns in /etc/nsswitch.conf and /etc/resolv.conf.
More details here : http://docs.oracle.com/cd/E23823_01/html/816-4554/index.html

Error when opening configuration manager in the administration workstation

Hello,
For some reason I get this error everytime I try to open the configuration manager on the administration workstation. The error says "(-9934) Unable to initialize the real-time feed for instance cdi. Unable to proceed until the real-time can be established. The feed may be inactive or you may
not have permission to connect to the feed."
Does anyone have any suggestions why I get this error?
Thank You.

Once you login to the AW you should see all the aw processes in the task bar.You would even see this error if you simply do not use the /console option to login when using mstc.
I did not even consider that someone did not have the Distributor running - you are right.
But you have to adjust your thinking - "you should see all the aw processes in the task bar" - will not cut it with Windows 2008.
With 8.0 and onwards, perhaps you should consider mentioning the Portico.
Rgards,
Geoff

HOW TO CONFIGURE MANAGER or APPROVER USER IN ACCESS REQUEST MANAGEMENT TO APPROVE OR REJECT REQUEST

hi sap gurus,
i configured grc 10 system successfully. I created one user: GR_AR_APP001 and assign following roles:
SAP_GRAC_ACCESS_APPROVER
SAP_GRAC_ACCESS_REQUEST_ADMIN
SAP_GRC_FN_BASE
SAP_GRC_FN_NUSINESS_USER
and I maintained GR_AR_APP001 in access control owners as "POINT OF CONTACT", "SECURITY LEAD" and "WORKFLOW ADMINISTRATOR"
but when i am creating access request for new user and defining MANAGER under user details tab as GR_AR_APP001.
the user GR_AR_APP001 is not receiving any request for APPROVE or REJECT in his WORK INBOX.
can u please guide me how to configure APPROVER or MANAGER to approve or reject request.
I will be very much thankful if you guide me successfully.

Hi Colleen,
thanks a lot for your time.
PIC1: I created one user: GR_AR_APP001
and assigned all the GRC ROLES.
PIC2: I assigned owner type to GR_AR_APP001 user : POINT OF CONTACT, SECURITY LEAD and WORKFLOW ADMINISTRATOR in NWBC ACCESS CONTROL OWNERS
PIC3: I created one EUP 980 (copied from default EUP)
PIC4: I maintained default manager as GR_AR_APP001 user in 980 EUP
PIC5: I selected SAP_GRAC_ACCESS_REQUEST process id
PIC6: I created one agent id as ZGRAC_MANAGER11 in which I added approver user id: GR_AR_APP001
PIC7: I saved agent id
PIC8: I added agent id as ZGRAC_MANAGER11 in stage5 in manager stage.
PIC9: I saved
PIC10: I maintained EUP 980 (in which I configured manager as GR_AR_APP001 user) in stage 5 task settings
PIC11: Maintain Route Mapping, I clicked on next
PIC12 and PIC13: I saved and activated.
After this process I created one request for new account and selected the manager as GR_AR_APP001 and one request is created with request no 9000000030.
now I logged into system by user GR_AR_APP001 and checked, there is no request under his work inbox.
please guide me at least one procedure, how to receive request in approver work inbox so that I can learn other procedures to configure approver as per our organization requirement.
thanks for your support Colleen.

Can't login System Access Manager and Delegated Administrator page

Hi.
Suddenly I can't log in System Access Manager & Delegated Administrator page. Yesterday,I could.
Do you help me?
thanks.

k-m-i wrote:
Suddenly I can't log in System Access Manager & Delegated Administrator page. Yesterday,I could.Given that you have provided nothing in the way of usable information to isolate the problem I can only suggest restarting your directory server (assuming it hasn't crashed) then restarting the web-container hosting Access Manager and see if that fixes the problem.
If not, you will have to look further into the web-server logs and the directory server logs to see why the problem is occurring.
Regards,
Shane.

How to configure the Access Server?

Hi All
I am in the process of migrating from 11.0.1 to 12.0.
I have some real-time jobs.
For this I need to configure the Access Server.
I can understand I should do this from Server Manager>Edit Access Server Config>Add
Here what info we need to give? Does it mean we need to give the server name on which current version is installed? How to choose the port?
My old version DI 11.0.1 is using port 4000. Also in the DS Mgmt Console, I am defaultly getting the Old Job Server in the Adapter Config node. How to remove this?
Someone plz help me on this.
Thank You
Ganesh Sampath

You have to explicitly share directories on external/secondary volumes.
Use the Server admin app to configure file sharing, and select which directory/directories on the second drive you want to share, then they'll be available to clients.

Who has view and manage access to all pages and folders?

How can I find out who has premissions to manage and view all pages and content area folders in Portal without editing each users User Profile entry? Is there a tabel that holds this information?
Regards
Andrew

Hi,
There are a lot of useful scripts on TechNet One Script site. Here is a helpful one:
Retrieve Full Access Permissions for Shared Mailboxes
http://gallery.technet.microsoft.com/office/Retrieve-Full-Access-09544b54
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

How to configure a link in my page which should navigates to new webpage

Hi ,
Iam using Jdev 11g(11.1.2.0.0)
My scenario is like i need to configure a link in my page. If i click that link , it should navigates me to another web page.
Please tell me how to configure the URL to which it has to be navigated on clicking the link.
Thanks in advance

I assume that you are using adf rich faces. In this case you use an af:goLink and give the whole URL as you would type it in the browser as the 'destination' property select '_blank' as 'TargetFrame' to open a new window...
Timo

How Does Configuration Manager 2012 R2 Endpoint Protection Stack Up to the Competition (Bit9, Symantec, McAfee, etc.)?

I have a client in the financial services sector that owns System Center 2012 R2 (just Operations Manager 2012 R2 deployed so far) that is being courted by Bit9 for its "superior" endpoint protection. Can anyone point me to some credible resources
for comparing Microsoft's Endpoint Protection (component of Configuration Manager 2012 R2) to the competition (Bit9, Symantec, McAfee, etc.)?
If Microsoft's Endpoint Protection is "good enough" (and has a credible long term product roadmap), it probably makes sense to deploy that since it has already been purchased/licensed. Any feedback is much appreciated.
Thanks in advance.
Bill Thacker

Check out this page :
http://www.microsoft.com/security/portal/mmpc/research/awards-and-certifications.aspx
Under "Highlight"
There are many awards and certification programs across the IT security industry. Detailed below are some of the most widely recognized programs and testing
bodies.
Benoit Lecours | Blog: System Center Dudes

SG300 - How to block managment access

Hello and thanks in advance for you help.
I have a SG300 switch working in layer 3 mode.
I created 3 VLANS and the intervlan communication is working fine. I want to know how to block acces to switch managment from the Vlans.
One of the vlan is allowed to access the switch but not the others vlans.
What is the best way to implement this? with ACL or with Managment Access Method, creating an access profile?
thanks againg!

Hi Angel
Access list work on packets traversing through the switch/
Try the following method to restrict access to the management interface.
Have a look at the GUI section on Security > Mgmt Access Method > Profile rules and see which methods or restrictions better suit your needs.
regards Dave

How to configure simultanous access for 11i application

Hi All
We have one existing 11i application instance on node grid1.In which we start the servicess from apps user.
In our same we want another node for the same application in which we will start the servicess from another user(merge)
For that we perfrom the following steps
1.Copy the APPL_TOP,COMMON_TOP,ORA_TOP(8.0.6,iAS) from node "GRID1" to diffrent node "GRID2"
2 configure the GRID2 node using adcfgclone.pl utility(we have configure new node for WEB and FORM Server)
3 We perfrom the modification in the following files ON GRID2 .
i Identify 'FNDNAM=apps' statement in $FND_TOP/secure/<context>.dbc
and replace with 'FNDNAME=merge' to connect to MERGE schema instaed of APPS.
ii. Go to the last line of $APACHE_TOP/jserv/etc/zone.properties file
and identify 'schema=APPS' statement and change it to 'schema=MERGE'
iii. Identify below lines in $APACHE_TOP/modplsql/cfg/wdbsvr.app file
password = apps
     username = apps
     document_table = APPS.fnd_lobs_document
and replace with modified below lines
password = merge
     username = merge
     document_table = MERGE.fnd_lobs_document
6. For redirecting user's request to new Application Server server, we
changed the following 4 system profile options with proper URL and port
at responsibility level only for the responsibilities,
which we use for Merge views.
Profile Options
     Application Framework Agent
     Applications JSP Agent
     Applications Web Agent
     Apps Servlet Agent
When we are able to start the services on GRID2 node,but at the time of login we are getting invalid user name/ passwd error
Please let us know is there any way to access application other than apps user
Regards
Sohail

well thank you very much .I know how to define a DataSource inside Weblogic Server.
But i am confused over one issue
When We are going to use Container Managed EntityManager inside the SessionBean the persistence.xml file looks like this
*<persistence>*
*     <persistence-unit name="RamsEJBPU" transaction-type="JTA">*
*          <jta-data-source>myJtaDataSource</jta-data-source>*
*     </persistence-unit>*
*</persistence>*
But in some cases it looks like as shown below :     <persistence-unit name="RamsEJBPU" transaction-type="resource-local">
     <provider>org.hibernate.ejb.HibernatePersistence</provider>
                  <properties>
               <property name = "hibernate.connection.driver_class" value = "oracle.jdbc.driver.OracleDriver"/>
               <property name = "hibernate.connection.url" value = "jdbc:oracle:thin:@localhost:1521:orcl"/>
               <property name = "hibernate.connection.username" value = "CHENNAISPAT"/>
               <property name = "hibernate.connection.password" value = "CHENNAISPAT"/>
            </properties>
     </persistence-unit>
</persistence>Can you please tell me why is it so ??

How to configure firewall access for ASA 5510

Hi,
This is my first time to use the Cisco ASA 5500 family. I have a request from a user to create an access rule, to allow all LAN traffic to Destination IP address 165.241.29.17, 165.241.31.254 with Destination TCP port 5060,5061,5070 and UDP port 50000-52399.
I want to do this using ASDM, How do I accomplish this?
Thanks,
Jojo

Hey Jojo I use the ASDM to manage my ASA... so below should get you a general access rule to allow what you need.
•1.      Log into your ASA using ASDM.. on the top tabs look for "Configuration"
•2.      Once you click "Configuration", on the left side panel down at the bottom you should see "Firewall". Make sure you’re in the "Firewall" menu and at the top you should be viewing "Access Rules". You should see a list of access rules applied to your ASA.
•3.      At the top you should see a green "+Add" to add a new access rule to your ASA. Once clicked you should identify…
     •a.      Interface - INSIDE or OUTSIDE
     •b.      Action - PERMIT or DENY
     •c.      Source - Subnet that needs to talk to destination address
     •d.      Destination - use the [...] box to create a Network Object for 165.241.29.17 and 165.241.31.254 use /32 mask for specific ip address and not a range
     •e.      Service - Again use the [...] box to create TCP and UDP Service Groups for the specific ports
•4.     You can then enter a description of the specific access rule and enable logging.
This should be it... let me know how this works out for you!!

How to configure Remote Access to APE HDD

I know this may seem like a newbie question to ask, but I'm trying to figure out how to remotely access the Hard drive that is on my APE network. I just need to know what I need to configure on the airport so that I can get it all to work. I'm fairly sure that I've got a static IP from my isp, but am working on verifying that just to be sure. Any help is welcome, thanks!

Scooter1015 wrote:
So what this guy is saying makes sense, except when I try to do the Port forwarding the airport tells me that I can't use port 548 unless I disable file sharing which is what I use anyway.
I took another look at the instructions on that Web page. Evidently that person had another router that was creating his LAN and had a Time Capsule connected to that router. If your AirPort Extreme is your "main" router, you shouldn't need to forward any ports, as the AEBS is the end destination of your disk access communications.
Be sure that in the File Sharing tab of AirPort Utility's Disks panel you've checked "Share disks over WAN".

How to configure DMZ access for ftp/https without NAT

I have a closed network that is not connnected to the internet, just other sites that we want to communicate with. We have a cisco router connected to the outside interface on an ASA5505 and a cisco router connected to the inside interface on the same ASA5505. I have an inside interface that connects our management LAN, five separate DMZ interfaces with a separate LAN (VLAN) on each DMZ interface and the outside interface that connects to the other sites. Data is not allowed to mingle between the five DMZ's.
Alll connections to the other separate nodes are handled with the router on the external interface. IPSEC GRE tunnels have been established between all sites and BGP routing has been verified. Pings are good between inside, dmz and external interfaces and between the DMZ's and the other sites, to include hosts on our local networks and hosts at the remote sites. Inter and intra traffic is enabled.
When a remote site attempts an https connection, the initial ACK handshake makes it through the ASA5505, but the return SYN/ACK is being knocked down and I don't understand why (it is not because of ACL's, they are any any at this point).
Looking for some ideas on why the return SYN/ACK to the remote site isn't getting through the ASA5505 outbound. Will probably have the same issue with FTP, but right now, just trying to solve one problem at a time.
ASA5505 is in routed mode, not looking to NAT since the IP addresses in the DMZ need to be reached by their real IP address.
Thanks,

When I use the packet-trace in both directions with the endpoint IP's, it works, all phases show allowed. I see the hits against the ACL's that show the packet entry in to the outside interface of the ASA, the build up of the connection so the initial step of the external host ACK is reaching the webserver in the DMZ. I see the hits against the incoming DMZ interface from the web server and then the log shows that the SYN,ACK is not in the state table and drops the outgoing packet. Since no outgoing SYN/ACK, no three way handshake, not login prompt, no web page to the endpoint.
I even changed the security settings on the outside interface to match the DMZ, enabled the inter and intra connections and that didn't work. ACL's on the incoming and outgoing outside and DMZ interfaces have any any tcp and any any ip but still the same result.
DMZ hosts point to the ASA. ASA points to external router on the outside interface. Pings all work fine. Tried ACL's at the top with port 443, but no hits on that. Even tried bypass with the same result. The initial packet from the external host doesn't seem to enter the state table so that when the host sends the reply (SYN/ACK) the ASA knocks it down.
Also tried twice NAT with static source/destination/port so that what comes in should be what is sent to the DMZ.
If I understand this device, I should have a rule that lets traffic in the outside interface from the external networks, a rule that allows DMZ traffic out the outside interface, a rule that allows external traffic in the DMZ and a rule that allows DMZ internal traffic back out to the external interface.
Still fuzzy on exactly how the data goes between the outside and the DMZ interfaces.
Is there something else I need to do or define to use HTTPS? I see that HTTP is defined and also has inspection rules.
I can try the captures tomorrow at work.
Thanks, for any pointers you can provide me.
Peyton
This is my first, painful experience with the ASA.

How to configure Manage Access in Administration page?

Similar Messages

Maybe you are looking for