How to Configure Multiple Relays / Mail Gateways
Platform: Sun Solaris 8
Software: iMS 5.2
How to Configure two MX ( relay / Gateway servers) records in imta config file..? Our requiorement is to have two gateways defined ..for example "xyz.net" and "xyz.com". All emails destined to email addresses ending with ".net" should use the "xyz.net" gateway and rest of them should use the "xyz.com" gateway. and the configuration should be flexible enopugh to accomodate future additions to our gateways.
An Early Response would be appriciated.
Thanks
Arun Addepalli
Well, To point the outside mail servers to your gateways just put MX entries for each domain into DNS and point dns to the correct host for that domain.
To make the mail server recognize the domain just create it in the ida and put the users under that domain. The users mailhost attribute will take care of letting the gateways know where to forward the mail so it will go to the correct host.
If you need to do domain aliasing with the same users for both domains that is a bit different. Do you need to do this?
Similar Messages
-
How to configure multiple domains in Active directory
HI,
How can I configure multiple domains on Active Directory. When I installed AD it asked for a domain name, there I gave ravigupta.com as domain name. But now I find no way of creating another domain.
I am a java developer and my task is to write a programme which returns all the domains available in LDAP server.
To start with ,I tried to create few domains in LDAP server ( AD ) but stuck up ,as i found there could exist only one domain.
Please tell me how to configure multiple domains in LDAP server ( Active Directory).
I skiped DNS configuration while AD installation.
-raviI'm sorry, but you should be asking on a different forum. This has nothing to do with Java.
-
How to configure multiple listeners to listen for the same instance.
Hello everyone,
I am running oracle database 11g and I want information regarding how to configure multiple listeners to listen for the same database instance. Actually I know how to configure more than one listener but the main thing that I am confused about is when we create listener.ora file, do we have to statically register the database instance with both the listeners or the instance will register itself with both the listeners.
According to my knowledge the instance will register with the listener specified by LOCAL_LISTENER parameter and we cannot have more than one value for this parameter.
Please only give detailed answers with example as I am tired of simple answers with details that I already know.Hello,
Yes, it can make sense to have several listener for one Oracle instance. For instance you may have one listener for the applications another listener for DBA administration tasks as well as one listener dedicated to dataguard broker. It is not possible to have several listeners listening on the same IP and Port.
By default the database try to automatically register to a listener on port 1521. To instruct the instance to register to a specifc list of listeners you can add in the init.ora the local_listener parameter with an alias definition:
i.e
local_listener=MY_SET_OFF_LISTENERS
in your tnsname.ora add an entry called:
MY_SET_OFF_LISTENERS_LOCAL= (ADDRESS_LIST=
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1530))
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1531))
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1532))
In this sample your instance will register to three listeners listening on respectively port 1530, 1531 and 1532
If you want your clients can be balanced over the 3 listeners -
How to configure Workflow Notification Mailer for oracle alert in R12
Hi all....,
How to configure Workflow Notfication mailer for oracle Alert in R12. Please provide the complete steps.. Its urgent.. Plz help me..
Regards ,
MadhanDuplicate thread (please post only once)
plz help me...!!!! Workflow Notification Mailer
plz help me...!!!! Workflow Notification Mailer -
How to configure multiple databases in single listener
Hi,
I want to configure upto 8 standby databases in a server. But I do not know how to configure multiple databases within the listener.
Also can I use the same port number for all the databases.
please give your suggestions.
thankyou
satyanagPlease check (http://download.oracle.com/docs/cd/B10501_01/network.920/a96580/toc.htm)
Jonathan Ferreira
http://oracle4dbas.blogspot.com -
How to configura multiple ldap server to the sun access manager
Hi,
please help how to configure multiple ldap server to the sun access manager, for example access manager does't find the user in ldap1 then it should search in ldap2.
Thanks
MouliThere�s no need for deleting the default amSDK based datastore because it�s needed for some default accounts.
You may try to create the datastore using the commandline (amadmin)
Have a look /etc/opt/SUNWam/config/xml/idRepoService.xml
You may also try to create amadmin account in the external ldap directory.
(Un)fortunately i�ve never tried to remove the default datastore.
-Bernhard -
Steps on how to configure inbound e-mail to SAP
Good Day!
Is there anyone who can give me the procedure on how to configure SAP e-mail going to e-mail server(exhange server). Actually from SAP GUI e-mail going to external e-mail like exchange....
thanks..Dear Dwight,
Kindly refer to the Base note 455140 for configuration details.
Following notes might also be helpful :
607108 Problem analysis when you send or receive e-mails
601806 Checklist Extended E-mail Inbox Setup
546147 SMTP plug-in: MS Exchange sends only to port 25
Regards
Amit -
How to configure multiple IP-Adresses on one NIC in OVM
Hi guys,
we have some OVM Servers 2.2.1 installed. They all have three NICs in them (eth0-2). For eth0 and eth2 we need multiple IP-Adresses configured to work with our storage solution. The configuration should look like this:
eth0:0 - 192.168.31.x
eth0:1 - 192.168.33.x
eth1 - 192.168.0.x
eth2:0 - 192.168.32.x
eth2:1 - 192.168.34.x
I tried creating gonfig files ifcfg-eth0:0 in /etc/sysconfig/network-scripts with the following content
DEVICE=eth0:0
BOOTPROTO=static
ONBOOT=yes
NETMASK=255.255.255.0
IPADDR=192.168.31.3
TYPE=Ethernet
HWADDR=00:1b:21:06:f0:fa
But it does not work. Neither eth0:0 nore an additional xenbr is configured when i restart.
I can configure multiple ip addresses for xenbr0 by calling something like "ifconfig xenbr0 192.168.31.x". But these settings get lost as sonn as i reboot the server.
I have already searched google, forums and blogs for a solution but could not find one. I thought that this should be a pretty common task. In "normal" linux it is not an issue at all.
Has somebody any experience with a setup like this? I would really apreciate your help.
Thanks
MarekHi,
configuring IP aliasses seems to work the same way like configuring VLANs. You will have to configure the appropriate bridges at system startup manually.
E.g. this little script is what I use to configure VLANs and briges on my OVM:
#!/bin/bash
echo "Configuring VLANs and bridges\n"
echo "Configuring VLAN 24 on eth2"
vconfig add eth2 24
brctl addbr br2.24
brctl addif br2.24 eth2.24
ifconfig eth2.24 up
ifconfig br2.24 up
echo "Configuring VLAN 31 on eth2"
vconfig add eth2 31
brctl addbr br2.31
brctl addif br2.31 eth2.31
ifconfig eth2.31 up
ifconfig br2.31 up
This script is run at startup by init using this startup skript in /etc/init.d, which is what I think you're missing as you can already seem to bring up the needed IPs manually - you'd have to change the chkconfig accordingly, that is make sure that the config script gets startet after the network has been brought up, like this: # chkconfig: 2345 11 91
[root@oraclevm01 ~]# cat /etc/init.d/vlan-config
#! /bin/bash
# vlan-config configure VLANs
# chkconfig: 2345 11 89
# description: Configures VLANs at boot time before the \
# network is started.
### BEGIN INIT INFO
# Provides: $vlan
### END INIT INFO
# Source function library.
. /etc/init.d/functions
if [ ! -f /etc/vlan-config ]; then
exit 0
fi
# See how we were called.
case $1 in
start)
# configure vlans
/etc/vlan-config
echo $"Usage: $0 {start}"
exit 1
esac
exit 0
Hth,
budy
Edited by: budachst on Jun 29, 2011 8:11 AM -
How to configure multiple IP addresses on one NIC?
Hi,
I just installed a OVM Server in version 3.2.1 and the according VMManager. Now i wanted to try to configure the Server/Server Pool. Now i come across a problem, which was already a big problem in OVM 2 while configuring the Networks.
All our OVM Servers have three NICs in them. One is for VMs and Management, the others are for connection to our SAN (Dell PowerVault MD 3220i). My problem is, that due to the network setup, the two NICs for storage need two IP addresses in two different networks each. This shouldn't be a problem, because usually in linux all you have to do is configure something like eth1:1. I remember having huge trouble configuring it in our OVM 2 cluster up to the point where I had to write a shell script to configure the second IP.
Anyways, I have configured two of the storage networks on eth1 and eth2 of the VM Server. Now i cannot configure any more IP addresses, because eth1 and eth2 are not available anymore for configuration in a third network. I really hoped that it would be possible in OVM 3 to configure multiple IP addresses. And probably it is only my lack of knowledge of how to configure it.
So any advice is well appreciated.
Thanks!
Regards,
Marek HubatkaYou should be able to do this by using "VLAN Groups".
http://docs.oracle.com/cd/E35328_01/E35332/E35332.pdf
Check out the VLAN groups section. You must great the VLAN groups before you can assign them to interfaces. -
How to Configure Multiple Purchase Requisitions per Service Order
Hi experts!
Sorry if this is in the wrong spot, but I was wondering how I can configure multiple Purchase Requisitions to be created from a service or maintenance order (IW31) based on the control key (or if it's even possible).
What would be the pros and cons of doing this? We currently only have one PR being created for one order (a 1-to-1 relationship), however now with implementing external services, we want 2 or more PRs created based on the control key. Is the control key the best way to go, or should I be looking at a different deciding field?
Thanks in advance!
StephanieRaj,
Thank you so much for the information. That does help! However business requirements are now changing to have different Purchase Requisitions created for a single order in the following scenarios:
- New Purchase Req created for different operations (you explained how above, perfect!)
- Seperate Purchase Req created for non-stock items (your answer above seems to group service operations and non-stock into the same Purchase Req).
- New Purchase Req created if the order has already been released. (If the order's status is still at "Create", then the additional component can be appended to the existing Purchase Req. If the order's status is "Released", and a new component is added, a new Purchase Req is created).
As mentioned, you explained how to do the first requirement. Is there anyway SAP can handle the next two requirements using standard config and not customizing anything?
Thanks in advance!
Steph -
How to configure multiple dev environment in single IP
HI,
I have a WLS running on a Windows NT machine. I want to configure multiple partition/environment
in that single WLS so that each user will have their own partition/environment to
play around. Once they are happy with their EJBs then we shall move them to a testing
environment. Is that possible in WLS??. Can anyone please guide me to a good documentation
about this one.
Many Thanks
Vasan.
PS: I dont want a clustering technology all i want is that in a single ip i wanna
multiple development environment.Tom,
looks like you are specifying http protocol in
sky.framework.ejb.SkySessionBean.getInitialContext method.
Change it to t3 or, if the JNDI lookup is in the same JVM, don't specify
PROVIDER_URL. If you have to use http tunneling due to any reason , you have to
enable HTTP Tunneling in server to which initial context is created. It is
disabled by default in 60. You can do so via console. Please refer to
documentation , let me know if you need additional help.
Viresh Garg
Principal Developer Relations Engineer
BEA Systems
Tom Purcell wrote:
Kevin,
You said that with 6.0 the following happens:
On the second server I get an error when I do
http://host:secondServerPort/index.html
Is this the error you get on the Admin Server:
<Feb 28, 2001 12:42:24 PM EST> <Info> <HTTPTunneling> <Login rejected with
code: 'Failed', reas
on: You are trying to use http tunneling
The server will not let you connect'>
<Feb 28, 2001 12:42:24 PM EST> <Error> <HTTP> <Problem dispatching servlet
request
weblogic.common.T3Exception: You are trying to use http tunneling
The server will not let you connect
at weblogic.socket.TunnelLogin.rejectConnection(TunnelLogin.java:87)
at weblogic.socket.TunnelLogin.service(TunnelLogin.java:59)
at
weblogic.servlet.internal.MuxableSocketHTTP.dispatch(MuxableSocketHTTP.java:
467)
at
weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:638)
at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
And on the Managed Server:
<Feb 28, 2001 12:42:24 PM EST> <Error> <ConnectionManager> <Could not
connect to: '0S:127.0.0.1
:[-1,7001,-1,-1,-1,-1,-1]'
java.net.ProtocolException: Tunneling result unspecified - is the HTTP
server at host: 'localho
st' and port: '7001' a WebLogic Server?
at
weblogic.rjvm.http.HTTPClientJVMConnection.handleNullResponse(HTTPClientJVMC
onnectio
n.java:152)
at
weblogic.rjvm.http.HTTPClientJVMConnection.connect(HTTPClientJVMConnection.j
ava:194)
at
weblogic.rjvm.http.HTTPClientJVMConnection.createConnection(HTTPClientJVMCon
nection.
java:98)
at weblogic.rjvm.Protocol.createConnection(Protocol.java:207)
at
weblogic.rjvm.ConnectionManager.findOrCreateConnection(ConnectionManager.jav
a:997)
at
weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:364)
at
weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:330)
at
weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:228)
at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:188)
at
weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:180)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:149)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:207)
at
weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
textFact
oryDelegate.java:232)
at
weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
textFact
oryDelegate.java:174)
at
weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFact
ory.java
:123)
at
javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:668)
at
javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:246)
at javax.naming.InitialContext.init(InitialContext.java:222)
at javax.naming.InitialContext.<init>(InitialContext.java:198)
at
sky.framework.ejb.SkySessionBean.getInitialContext(SkySessionBean.java:112)
at
sky.framework.ejb.SkySessionBean.setSessionContext(SkySessionBean.java:94)
at
sky.ejb.session.skyreferencesession.SkyReferenceSessionBeanImpl.setSessionCo
ntext(Sk
yReferenceSessionBeanImpl.java:87)
at
weblogic.ejb20.internal.StatelessEJBHome.createBean(StatelessEJBHome.java:22
9)
at
weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.jav
a:90)
at
weblogic.ejb20.pool.StatelessSessionPool.getBean(StatelessSessionPool.java:7
5)
at
weblogic.ejb20.manager.StatelessManager.preInvoke(StatelessManager.java:67)
at
weblogic.ejb20.internal.BaseEJBObject.preInvoke(BaseEJBObject.java:113)
at
weblogic.ejb20.internal.StatelessEJBObject.preInvoke(StatelessEJBObject.java
:55)
at
sky.ejb.session.skyreferencesession.SkyReferenceSessionBeanEOImpl.setDataSou
rce(SkyR
eferenceSessionBeanEOImpl.java:22)
at
sky.ejb.session.skyreferencesession.SkyReferenceSessionBeanEOImpl_WLSkel.inv
oke(SkyR
eferenceSessionBeanEOImpl_WLSkel.java:161)
at
weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
at
weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java
:128)
at
weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
at
weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.
java:103
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:1
7)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
Thanks,
Tom
<Feb 28, 2001 12:42:24 PM EST> <Info> <ConnectionManager> <Bootstrap unable
to get a: 'Protocol
: 'http'' connection to: 'localhost/127.0.0.1' on port: '7001'>
"Kevin Apte" <[email protected]> wrote in message
news:[email protected]...
This advice applies to WL5.1. I have been trying to configure a
multiinstance Weblogic with no success. I want multiple copies
of the sample petStore available for test by multiple users.
I think in 6.0
You would need to open an admin server
Open the configuration file for say PetStore.
Clone the petStore- call it petStore2. .
Create a copy of the startup script and modify it to start PetStore2.
After doing this only one config.xml is created for both servers.
I am able to start the first server and view the petStore application,
On the second server I get an error when I do
http://host:secondServerPort/index.html
How does one create multiple instances in WL6.0 using the console
or using a XML editor ?
Jesse E Tilly <[email protected]> wrote:
[This followup was posted to weblogic.developer.interest.management
and
a copy was sent to the cited author.]
In article <[email protected]>, [email protected]
says...
HI,
I have a WLS running on a Windows NT machine. I wantto configure multiple partition/environment
in that single WLS so that each user will have theirown partition/environment to
play around. Once they are happy with their EJBs thenwe shall move them to a testing
environment. Is that possible in WLS??. Can anyoneplease guide me to a good documentation
about this one.
Many Thanks
Vasan.
PS: I dont want a clustering technology all i wantis that in a single ip i wanna
multiple development environment.
NT isn't a multiuser environment. I will assume that
you mean some
Win32 box sitting in a room where people can copy their
classes/EJBs and
test their stuff. If this is the case, the setup is easy.
Create a directory and startup script for every developer.
Have a
global properties file in the same directory as the scripts
so that
common settings are, well, common. Tell each user to
modify the various
parts of the properties files in their directories to
deploy EJBs and
register servlets, etc etc.
In each startup script, you will have to specify the server
directory
and the binding port for each person. Pick a port (something
easy to
remember and high, like 30000, 30001, etc etc) for each
person. Why?
Well, when they connect to the app server, they'll know
they're hitting
only their server. Also, TCP/IP won't let more than one
JVM bind to the
same port, so if you want simultaneous instances (> 4
you better have
one kick ass Win32 box) you have to do this.
Hope this solves your problem.
JT
Senior Developer, HotelTools INC
[email protected] -
How to configure multiple smtp servers per domain
Hi,
how do we configure multiple smtp servers per domain/corporate in iplanet messaging server 5.2. i wanted to do this so that i can configure some domains with virus scanning and some domains without antivirus.Hi Martin,
Well we are trying to run a report without exactly specifying the name of reports server anywhere, e.g. in database or in form or anywhere else. Now if I do not supply a reports server name using RUN_REPORT_OBJECT, the error it displays is FRM-41211: Integration Error : SSL failure ... However if I specify the reports server name in the form, the reports run perfect. Also the name of reports server is specified in rwservlet.properties.
Now the question goes as follows:
Can I run my report from Form without specifying the name of the Reports server anywhere at all. This is so because either an in-process reports server should be picked or the one which is entered in rwservlet.properties should be pickec up by default. Please correct us if we are wrong. once we are through with it, we have to move to Oracle 10gR2 concept of reports server.
Thanks in anticipation,
Ruchi/Saurabh -
How to configure multiple report servers in Oracle 10 G R2?
I want to configure multiple report servers with my application deployed on Oracle 10G R2. Since R2 does not support report server clustering, how can this be achieved without any change in the application?
Currently, the application is running with single report server.Hi Martin,
Well we are trying to run a report without exactly specifying the name of reports server anywhere, e.g. in database or in form or anywhere else. Now if I do not supply a reports server name using RUN_REPORT_OBJECT, the error it displays is FRM-41211: Integration Error : SSL failure ... However if I specify the reports server name in the form, the reports run perfect. Also the name of reports server is specified in rwservlet.properties.
Now the question goes as follows:
Can I run my report from Form without specifying the name of the Reports server anywhere at all. This is so because either an in-process reports server should be picked or the one which is entered in rwservlet.properties should be pickec up by default. Please correct us if we are wrong. once we are through with it, we have to move to Oracle 10gR2 concept of reports server.
Thanks in anticipation,
Ruchi/Saurabh -
How to Configure Windows NT Mail on Alert Manager - System - Option
Hi
This is Regarding Oracle Financial Application.
In 11i, Alert Manager, there is an option to configure Windows NT Mail to Send and Recieve Mails (Oracle Alerts-Message).
Anybody knows, what is the configuration?
Our Company Mail Server is Window NT.
But, Our Oracle Application Server is Solaris Machine.
We want to configure the Mail settings .. while sending Oracle Alert from Oracle application, it should reach our NT Mail server.
In Unix settings Alert is working fine.
But, How to do the Windows NT Mail settings on this Application ?
Please reply on the following mail id : [email protected]
It's very urgent.
Thanks,
Sheeja.Hi
This is Regarding Oracle Financial Application.
In 11i, Alert Manager, there is an option to configure Windows NT Mail to Send and Recieve Mails (Oracle Alerts-Message).
Anybody knows, what is the configuration?
Our Company Mail Server is Window NT.
But, Our Oracle Application Server is Solaris Machine.
We want to configure the Mail settings .. while sending Oracle Alert from Oracle application, it should reach our NT Mail server.
In Unix settings Alert is working fine.
But, How to do the Windows NT Mail settings on this Application ?
Please reply on the following mail id : [email protected]
It's very urgent.
Thanks,
Sheeja. -
How to configure the iphone for zimbra mail?
have anyone used zimbra mail in iphone mail settings?
I'm able to access zimbra through safari...
But what is the configuration needed to be done to see in mail box?Contact Zimbra support and ask them.
Maybe you are looking for
-
Resolution problems with Samsung monitor
I recently purchased a Samsung Syncmaster 19" TV/monitor for use with my MacBook while at university. The monitor's resolution is 1440x900, and my macbook correctly chooses this resolution when plugged in. My understanding was that when using a large
-
having a bizarre problem and not sure where to even look for logs/solutions of this problem. I try to distribute a package to the DP (I'm running a single primary server) and it "succeeds" but doesn't actually do anything. The monitoring section does
-
CS6 does not open after EXTENDED trial is over
Hello everybody , I bought last september Photoshop CS6 on CD . Lately an EXTENDED trial version installed itself without my full consent ! now over one month later when I ask for CS6 Adobe Manager tell me to activate, if I try to connect it will not
-
Hi, In a GP I've added ABAP Web Dynpro components. They require a login to our ERP system to retrieve data. Is there any way to have them automatically logon to the ERP system so you don't have to enter credentials in the GP Runtime? Thanks in advanc
-
Lost search function on mini player
i've lost my search funtion on my mini player, along with what's playing next playlist, any suggestions? Thanks