How to configure multiple smtp servers per domain
Hi,
how do we configure multiple smtp servers per domain/corporate in iplanet messaging server 5.2. i wanted to do this so that i can configure some domains with virus scanning and some domains without antivirus.
Hi Martin,
Well we are trying to run a report without exactly specifying the name of reports server anywhere, e.g. in database or in form or anywhere else. Now if I do not supply a reports server name using RUN_REPORT_OBJECT, the error it displays is FRM-41211: Integration Error : SSL failure ... However if I specify the reports server name in the form, the reports run perfect. Also the name of reports server is specified in rwservlet.properties.
Now the question goes as follows:
Can I run my report from Form without specifying the name of the Reports server anywhere at all. This is so because either an in-process reports server should be picked or the one which is entered in rwservlet.properties should be pickec up by default. Please correct us if we are wrong. once we are through with it, we have to move to Oracle 10gR2 concept of reports server.
Thanks in anticipation,
Ruchi/Saurabh
Similar Messages
-
How to configure multiple report servers in Oracle 10 G R2?
I want to configure multiple report servers with my application deployed on Oracle 10G R2. Since R2 does not support report server clustering, how can this be achieved without any change in the application?
Currently, the application is running with single report server.Hi Martin,
Well we are trying to run a report without exactly specifying the name of reports server anywhere, e.g. in database or in form or anywhere else. Now if I do not supply a reports server name using RUN_REPORT_OBJECT, the error it displays is FRM-41211: Integration Error : SSL failure ... However if I specify the reports server name in the form, the reports run perfect. Also the name of reports server is specified in rwservlet.properties.
Now the question goes as follows:
Can I run my report from Form without specifying the name of the Reports server anywhere at all. This is so because either an in-process reports server should be picked or the one which is entered in rwservlet.properties should be pickec up by default. Please correct us if we are wrong. once we are through with it, we have to move to Oracle 10gR2 concept of reports server.
Thanks in anticipation,
Ruchi/Saurabh -
How to configure multiple RAS servers?
Hi
'Crystal Reports Server Embedded XI R2 - Sizing and Configuration Guide'
It mentions that we can get more license and add the servers in ClientSDKOptions.xml.
<ServerInfos version="2" xsi:type="CrystalReports.ServerInfos" id="1">
<ServerInfo version="2" xsi:type="CrystalReports.ServerInfo" id="2">
<Server>SERVER1:1566</Server>
<Adapter>TCPIP</Adapter>
</ServerInfo>
</ServerInfos>
<ServerInfos version="2" xsi:type="CrystalReports.ServerInfos" id="1">
<ServerInfo version="2" xsi:type="CrystalReports.ServerInfo" id="2">
<Server>SERVER2:1566</Server>
<Adapter>TCPIP</Adapter>
</ServerInfo>
</ServerInfos>
I tried this and added ClientSDKOptions.xml file in the web application lib directory
Added that to PATH
Our application uses (Crystal-2008 / rasapp.jar /rascore.jar)
com.crystaldecisions.sdk.occa.report.application.ReportClientDocument
When i commented out rcd.setReportAppServer(sn); it is not picking up from the XML file.
I am getting the below error
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException:
There is no server specified.---- Error code:-2147217390 Error code name:serverNotFound
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportAppSession.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportAppSession.int(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportAppSession.initialize(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ClientDocument.for(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.for(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ClientDocument.open(Unknown Source)
at com.crd.report.crystal.CrystalFile.makeRcd(CrystalFile.java:65)
at com.crd.report.crystal.CrystalReportUtil.makeRcd(CrystalReportUtil.java:892)
Please help me how to set up multiple RAS servers.
Thanks
SumathiYou are running an internal DNS server presumably but don't have these hostnames (A-NAME or C-NAME records) set on external DNS servers.
If you run a whois on your domain you can find our who hosts the DNS for the domain if you don't already know. Often DNS hosting companies will have web based tools for you to edit the DNS entries yourself or alternatively you may need to email them and ask them to create the records.
It sounds like you would like to point the addresses ubuntu.domain.com and win.domain.com to the IP address 92.62.26.10 as well. To do this you will have to make sure the services running on each box use a different port to one another. (I.e. You cannot have something running on port 80 on both servers).
Depending on your router also you may only be able to do basic forwarding (I.e. Port 80 forwards to Mac.domain.com; port 443 forwards to ubuntu.domain.com; port 25 forwards to win.domain.com).
If you need more flexibility you may need to get more external IP addresses. -
How to Configure Multiple Purchase Requisitions per Service Order
Hi experts!
Sorry if this is in the wrong spot, but I was wondering how I can configure multiple Purchase Requisitions to be created from a service or maintenance order (IW31) based on the control key (or if it's even possible).
What would be the pros and cons of doing this? We currently only have one PR being created for one order (a 1-to-1 relationship), however now with implementing external services, we want 2 or more PRs created based on the control key. Is the control key the best way to go, or should I be looking at a different deciding field?
Thanks in advance!
StephanieRaj,
Thank you so much for the information. That does help! However business requirements are now changing to have different Purchase Requisitions created for a single order in the following scenarios:
- New Purchase Req created for different operations (you explained how above, perfect!)
- Seperate Purchase Req created for non-stock items (your answer above seems to group service operations and non-stock into the same Purchase Req).
- New Purchase Req created if the order has already been released. (If the order's status is still at "Create", then the additional component can be appended to the existing Purchase Req. If the order's status is "Released", and a new component is added, a new Purchase Req is created).
As mentioned, you explained how to do the first requirement. Is there anyway SAP can handle the next two requirements using standard config and not customizing anything?
Thanks in advance!
Steph -
How to configure multiple (virtual) servers?
Hi, I have one public IP (for example: 92.62.26.10)
and 3 servers. Mac Server, Ubuntu Server and Windows server..
Snow Leopard server have 92.62.26.10 & 192.168.1.1
Ubuntu server have 192.168.1.10
Win server have 192.168.1.11
DNS is set to:
mac.domain.com - 92.62.26.10 (it's worked everywhere)
ubuntu.domain.com - 192.168.1.10 (it's not worked everywhere, only in private network or VPN)
win.domain.com - 192.168.1.10 (it's not worked everywhere, only in private network or VPN)
What I need to setup? Proxy or something else?
Thank you
Message was edited by: Jirik.meYou are running an internal DNS server presumably but don't have these hostnames (A-NAME or C-NAME records) set on external DNS servers.
If you run a whois on your domain you can find our who hosts the DNS for the domain if you don't already know. Often DNS hosting companies will have web based tools for you to edit the DNS entries yourself or alternatively you may need to email them and ask them to create the records.
It sounds like you would like to point the addresses ubuntu.domain.com and win.domain.com to the IP address 92.62.26.10 as well. To do this you will have to make sure the services running on each box use a different port to one another. (I.e. You cannot have something running on port 80 on both servers).
Depending on your router also you may only be able to do basic forwarding (I.e. Port 80 forwards to Mac.domain.com; port 443 forwards to ubuntu.domain.com; port 25 forwards to win.domain.com).
If you need more flexibility you may need to get more external IP addresses. -
How to configure multiple domains in Active directory
HI,
How can I configure multiple domains on Active Directory. When I installed AD it asked for a domain name, there I gave ravigupta.com as domain name. But now I find no way of creating another domain.
I am a java developer and my task is to write a programme which returns all the domains available in LDAP server.
To start with ,I tried to create few domains in LDAP server ( AD ) but stuck up ,as i found there could exist only one domain.
Please tell me how to configure multiple domains in LDAP server ( Active Directory).
I skiped DNS configuration while AD installation.
-raviI'm sorry, but you should be asking on a different forum. This has nothing to do with Java.
-
Alpine: multiple SMTP Servers & Trash folder
Hi,
I want to use multiple smtp servers in alpine. I've set a main server via Setup->Configuration (see below) and added another imap Server via Setup->collectionLists. So reading mail is no problem, I can see the different servers / folders in the "Folder List" view (the added dots or slashes after the folder names are a minor problem...).
In order to send mail via the second server, I've added a rule via Setup->Rules->Roles, so when sending a message, the right smtp server corresponding to the folder where I'm in is chosen.
BUT alpine always postpones messages to the folder on the main server, even when the message is composed for the second server. The same applies for sent messages: they are always saved on the main server.
How do I tell alpine to save postponed/sent messages on the right server?
Current configuration:
Setup -> Configuration:
Personal Name = My Name
User Domain = <No Value Set>
SMTP Server (for sending) = smtp.server.tld:587/user=USERNAME/tls
NNTP Server (for news) = <No Value Set>
Inbox Path = {imap.server.tld:993/user=USERNAME/ssl}INBOX
Incoming Archive Folders = <No Value Set>
Pruned Folders = <No Value Set>
Default Fcc (File carbon copy) = {imap.server.tld:993/user=USERNAME/ssl}Sent
Default Saved Message Folder = <No Value Set: using "saved-messages">
Postponed Folder = {imap.server.tld:993/user=USERNAME/ssl}Drafts
Read Message Folder = <No Value Set>
Form Letter Folder = <No Value Set>
Trash Folder = {imap.server.tld:993/user=USERNAME/ssl}Trash
Literal Signature = <No Value Set>
Signature File = <No Value Set: using ".signature">
Feature List =
Setup->Rules->Roles
============ ACTIONS BEGIN HERE =============
Initialize settings using role : <No Value Set>
Set From = My name <[email protected]>
Set Reply-To = <No Value Set>
Set Fcc = <No Value Set: using "value from fcc-name-rule">
Set LiteralSig = <No Value Set>
Set Signature = <No Value Set: using "default (.signature)">
Set Template = <No Value Set>
Set Other Hdrs = <No Value Set>
Use SMTP Server = smtp.2nd-server.tld:25/[email protected]/tls
Use NNTP Server = <No Value Set>
Second question: How do I make use of the Trash folder? At present, mails marked for deletion are deleted completely when expunged. How do I move them to Trash folder instead? (of course in the trash folder on the right server...)
Any hints appreciated -- Thanks!mrchi wrote:
Mail also lists other folders with similar names at the same level as INBOX, which appear to have a mysterious relationship with the real folders on the server. Some are the same as, some not. Are they "local" folders?
Yes, they're local folders (located in /Users/youruseraccount/Library/Mail/IMAP-account@domain), they're synced and display the contents of the folders on the server, so when you move some message from one folder to the other, the folders on the server will reflect this change.
Also, to select if you want to keep local copies of the messages or not, you can go to the Advanced properties of the IMAP account in Mail.
Can I get rid of them and just use Mail to display only what is actually on the server, in the structure it is on the server?
Nic
No, you can't get rid of them. Usually you can minimize them under a sort of earth globe icon. -
Can I setup multiple SMTP servers / emails with one IMAP servers on the iPh
All my email arrives at one place, on one IMAP server. However I have 2 email addresses, and need to use a different SMTP server for each one. How to setup this on the iPhone? This is what I considered so far:
1. I don't see how to enter multiple addresses for the same account, and map each address to a SMTP server.
2. If I create multiple accounts, I have to enter multiple IMAP server, and the iPhone doesn't let me enter the same IMAP server information for different accounts.
3. I could create a second account with a dummy IMAP/POP server, and a real SMTP server. But then most likely if I respond to mails that arrive on my IMAP server (1st account), Mail will always use my 1st email address when responding. Instead I'd like it to automatically pick as From the To address of the mail I am responding to (as the desktop Mail.app does).
AlexIf you have multiple SMTP servers available, you can select from one of the available SMTP servers for a particular account.
After you've entered the SMTP server for the first account when creating the 1st account and you've entered the SMTP server for a 2nd account when creating the 2nd account, you'll have both SMTP servers available to use with either or both accounts. -
How to configure multiple listeners to listen for the same instance.
Hello everyone,
I am running oracle database 11g and I want information regarding how to configure multiple listeners to listen for the same database instance. Actually I know how to configure more than one listener but the main thing that I am confused about is when we create listener.ora file, do we have to statically register the database instance with both the listeners or the instance will register itself with both the listeners.
According to my knowledge the instance will register with the listener specified by LOCAL_LISTENER parameter and we cannot have more than one value for this parameter.
Please only give detailed answers with example as I am tired of simple answers with details that I already know.Hello,
Yes, it can make sense to have several listener for one Oracle instance. For instance you may have one listener for the applications another listener for DBA administration tasks as well as one listener dedicated to dataguard broker. It is not possible to have several listeners listening on the same IP and Port.
By default the database try to automatically register to a listener on port 1521. To instruct the instance to register to a specifc list of listeners you can add in the init.ora the local_listener parameter with an alias definition:
i.e
local_listener=MY_SET_OFF_LISTENERS
in your tnsname.ora add an entry called:
MY_SET_OFF_LISTENERS_LOCAL= (ADDRESS_LIST=
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1530))
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1531))
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1532))
In this sample your instance will register to three listeners listening on respectively port 1530, 1531 and 1532
If you want your clients can be balanced over the 3 listeners -
How to configure multiple databases in single listener
Hi,
I want to configure upto 8 standby databases in a server. But I do not know how to configure multiple databases within the listener.
Also can I use the same port number for all the databases.
please give your suggestions.
thankyou
satyanagPlease check (http://download.oracle.com/docs/cd/B10501_01/network.920/a96580/toc.htm)
Jonathan Ferreira
http://oracle4dbas.blogspot.com -
How to configure the smtp server..
i had an error when running the java mail program..
this is my program
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.*;
import java.io.*;
import java.util.Properties;
public class MailClient
public void sendMail(String mailServer, String from, String to,
String subject, String messageBody,
String[] attachments) throws
MessagingException, AddressException
// Setup mail server
Properties props = System.getProperties();
props.put("mail.smtp.host", mailServer);
// Get a mail session
Session session = Session.getDefaultInstance(props, null);
// Define a new mail message
Message message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
message.setSubject(subject);
// Create a message part to represent the body text
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText(messageBody);
//use a MimeMultipart as we need to handle the file attachments
Multipart multipart = new MimeMultipart();
//add the message body to the mime message
multipart.addBodyPart(messageBodyPart);
// add any file attachments to the message
// addAtachments(attachments, multipart);
// Put all message parts in the message
message.setContent(multipart);
// Send the message
Transport.send(message);
protected void addAtachments(String[] attachments, Multipart multipart)
throws MessagingException, AddressException
for(int i = 0; i<= attachments.length -1; i++)
String filename = attachments;
MimeBodyPart attachmentBodyPart = new MimeBodyPart();
//use a JAF FileDataSource as it does MIME type detection
DataSource source = new FileDataSource(filename);
attachmentBodyPart.setDataHandler(new DataHandler(source));
//assume that the filename you want to send is the same as the
//actual file name - could alter this to remove the file path
attachmentBodyPart.setFileName(filename);
//add the attachment
multipart.addBodyPart(attachmentBodyPart);
public static void main(String[] args)
try
MailClient client = new MailClient();
String server="smtp.canvasindia.com";
String from="[email protected]";
String to = "[email protected]";
String subject="Test";
String message="Testing";
String[] filenames ={"c:/A.java"};
client.sendMail(server,from,to,subject,message,filenames);
catch(Exception e)
e.printStackTrace(System.out);
the error is .................
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 553 Attack detected from p
ool 59.144.8.116. <http://unblock.secureserver.net/?ip=59.144.8.*>
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1196)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:584)
at javax.mail.Transport.send0(Transport.java:169)
at javax.mail.Transport.send(Transport.java:98)
at MailClient.sendMail(MailClient.java:47)
at MailClient.main(MailClient.java:84)
Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 553 Attack detected fro
m pool 59.144.8.116. <http://unblock.secureserver.net/?ip=59.144.8.*>
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1047)
... 5 more
how to configure the smtp server in my machine..
please guide me...This uses gmail account, and gmail smtp
* MailSender.java
* Created on 14 November 2006, 17:07
* This class is used to send mails to other users
package jmailer;
* @author Abubakar Gurnah
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
public class MailSender{
private String d_email,d_password;
* This example is for gmail, you can use any smtp server
* @param d_email --> your gmail account e.g. [email protected]
* @param d_password --> your gmail password
* @param d_host --> smtp.gmail.com
* @param d_port --> 465
* @param m_to --> [email protected]
* @param m_subject --> Subject of the message
* @param m_text --> The main message body
public String send(String d_email,String d_password,String d_host,String d_port,
String m_from,String m_to,String m_subject,String m_text ) {
this.d_email=d_email;
this.d_password=d_password;
Properties props = new Properties();
props.put("mail.smtp.user", d_email);
props.put("mail.smtp.host", d_host);
props.put("mail.smtp.port", d_port);
props.put("mail.smtp.starttls.enable","true");
props.put("mail.smtp.auth", "true");
//props.put("mail.smtp.debug", "true");
props.put("mail.smtp.socketFactory.port", d_port);
props.put("mail.smtp.socketFactory.class", "javax.net.ssl.SSLSocketFactory");
props.put("mail.smtp.socketFactory.fallback", "false");
SecurityManager security = System.getSecurityManager();
try {
Authenticator auth = new SMTPAuthenticator();
Session session = Session.getInstance(props, auth);
//session.setDebug(true);
MimeMessage msg = new MimeMessage(session);
msg.setText(m_text);
msg.setSubject(m_subject);
msg.setFrom(new InternetAddress(m_from));
msg.addRecipient(Message.RecipientType.TO, new InternetAddress(m_to));
Transport.send(msg);
return "Successful";
} catch (Exception mex) {
mex.printStackTrace();
return "Fail";
//public static void main(String[] args) {
// MailSender blah = new MailSender();
private class SMTPAuthenticator extends javax.mail.Authenticator {
public PasswordAuthentication getPasswordAuthentication() {
return new PasswordAuthentication(d_email, d_password);
} -
How to configura multiple ldap server to the sun access manager
Hi,
please help how to configure multiple ldap server to the sun access manager, for example access manager does't find the user in ldap1 then it should search in ldap2.
Thanks
MouliThere�s no need for deleting the default amSDK based datastore because it�s needed for some default accounts.
You may try to create the datastore using the commandline (amadmin)
Have a look /etc/opt/SUNWam/config/xml/idRepoService.xml
You may also try to create amadmin account in the external ldap directory.
(Un)fortunately i�ve never tried to remove the default datastore.
-Bernhard -
How to configure multiple IP-Adresses on one NIC in OVM
Hi guys,
we have some OVM Servers 2.2.1 installed. They all have three NICs in them (eth0-2). For eth0 and eth2 we need multiple IP-Adresses configured to work with our storage solution. The configuration should look like this:
eth0:0 - 192.168.31.x
eth0:1 - 192.168.33.x
eth1 - 192.168.0.x
eth2:0 - 192.168.32.x
eth2:1 - 192.168.34.x
I tried creating gonfig files ifcfg-eth0:0 in /etc/sysconfig/network-scripts with the following content
DEVICE=eth0:0
BOOTPROTO=static
ONBOOT=yes
NETMASK=255.255.255.0
IPADDR=192.168.31.3
TYPE=Ethernet
HWADDR=00:1b:21:06:f0:fa
But it does not work. Neither eth0:0 nore an additional xenbr is configured when i restart.
I can configure multiple ip addresses for xenbr0 by calling something like "ifconfig xenbr0 192.168.31.x". But these settings get lost as sonn as i reboot the server.
I have already searched google, forums and blogs for a solution but could not find one. I thought that this should be a pretty common task. In "normal" linux it is not an issue at all.
Has somebody any experience with a setup like this? I would really apreciate your help.
Thanks
MarekHi,
configuring IP aliasses seems to work the same way like configuring VLANs. You will have to configure the appropriate bridges at system startup manually.
E.g. this little script is what I use to configure VLANs and briges on my OVM:
#!/bin/bash
echo "Configuring VLANs and bridges\n"
echo "Configuring VLAN 24 on eth2"
vconfig add eth2 24
brctl addbr br2.24
brctl addif br2.24 eth2.24
ifconfig eth2.24 up
ifconfig br2.24 up
echo "Configuring VLAN 31 on eth2"
vconfig add eth2 31
brctl addbr br2.31
brctl addif br2.31 eth2.31
ifconfig eth2.31 up
ifconfig br2.31 up
This script is run at startup by init using this startup skript in /etc/init.d, which is what I think you're missing as you can already seem to bring up the needed IPs manually - you'd have to change the chkconfig accordingly, that is make sure that the config script gets startet after the network has been brought up, like this: # chkconfig: 2345 11 91
[root@oraclevm01 ~]# cat /etc/init.d/vlan-config
#! /bin/bash
# vlan-config configure VLANs
# chkconfig: 2345 11 89
# description: Configures VLANs at boot time before the \
# network is started.
### BEGIN INIT INFO
# Provides: $vlan
### END INIT INFO
# Source function library.
. /etc/init.d/functions
if [ ! -f /etc/vlan-config ]; then
exit 0
fi
# See how we were called.
case $1 in
start)
# configure vlans
/etc/vlan-config
echo $"Usage: $0 {start}"
exit 1
esac
exit 0
Hth,
budy
Edited by: budachst on Jun 29, 2011 8:11 AM -
How to configure multiple IP addresses on one NIC?
Hi,
I just installed a OVM Server in version 3.2.1 and the according VMManager. Now i wanted to try to configure the Server/Server Pool. Now i come across a problem, which was already a big problem in OVM 2 while configuring the Networks.
All our OVM Servers have three NICs in them. One is for VMs and Management, the others are for connection to our SAN (Dell PowerVault MD 3220i). My problem is, that due to the network setup, the two NICs for storage need two IP addresses in two different networks each. This shouldn't be a problem, because usually in linux all you have to do is configure something like eth1:1. I remember having huge trouble configuring it in our OVM 2 cluster up to the point where I had to write a shell script to configure the second IP.
Anyways, I have configured two of the storage networks on eth1 and eth2 of the VM Server. Now i cannot configure any more IP addresses, because eth1 and eth2 are not available anymore for configuration in a third network. I really hoped that it would be possible in OVM 3 to configure multiple IP addresses. And probably it is only my lack of knowledge of how to configure it.
So any advice is well appreciated.
Thanks!
Regards,
Marek HubatkaYou should be able to do this by using "VLAN Groups".
http://docs.oracle.com/cd/E35328_01/E35332/E35332.pdf
Check out the VLAN groups section. You must great the VLAN groups before you can assign them to interfaces. -
How to configure multiple dev environment in single IP
HI,
I have a WLS running on a Windows NT machine. I want to configure multiple partition/environment
in that single WLS so that each user will have their own partition/environment to
play around. Once they are happy with their EJBs then we shall move them to a testing
environment. Is that possible in WLS??. Can anyone please guide me to a good documentation
about this one.
Many Thanks
Vasan.
PS: I dont want a clustering technology all i want is that in a single ip i wanna
multiple development environment.Tom,
looks like you are specifying http protocol in
sky.framework.ejb.SkySessionBean.getInitialContext method.
Change it to t3 or, if the JNDI lookup is in the same JVM, don't specify
PROVIDER_URL. If you have to use http tunneling due to any reason , you have to
enable HTTP Tunneling in server to which initial context is created. It is
disabled by default in 60. You can do so via console. Please refer to
documentation , let me know if you need additional help.
Viresh Garg
Principal Developer Relations Engineer
BEA Systems
Tom Purcell wrote:
Kevin,
You said that with 6.0 the following happens:
On the second server I get an error when I do
http://host:secondServerPort/index.html
Is this the error you get on the Admin Server:
<Feb 28, 2001 12:42:24 PM EST> <Info> <HTTPTunneling> <Login rejected with
code: 'Failed', reas
on: You are trying to use http tunneling
The server will not let you connect'>
<Feb 28, 2001 12:42:24 PM EST> <Error> <HTTP> <Problem dispatching servlet
request
weblogic.common.T3Exception: You are trying to use http tunneling
The server will not let you connect
at weblogic.socket.TunnelLogin.rejectConnection(TunnelLogin.java:87)
at weblogic.socket.TunnelLogin.service(TunnelLogin.java:59)
at
weblogic.servlet.internal.MuxableSocketHTTP.dispatch(MuxableSocketHTTP.java:
467)
at
weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:638)
at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
And on the Managed Server:
<Feb 28, 2001 12:42:24 PM EST> <Error> <ConnectionManager> <Could not
connect to: '0S:127.0.0.1
:[-1,7001,-1,-1,-1,-1,-1]'
java.net.ProtocolException: Tunneling result unspecified - is the HTTP
server at host: 'localho
st' and port: '7001' a WebLogic Server?
at
weblogic.rjvm.http.HTTPClientJVMConnection.handleNullResponse(HTTPClientJVMC
onnectio
n.java:152)
at
weblogic.rjvm.http.HTTPClientJVMConnection.connect(HTTPClientJVMConnection.j
ava:194)
at
weblogic.rjvm.http.HTTPClientJVMConnection.createConnection(HTTPClientJVMCon
nection.
java:98)
at weblogic.rjvm.Protocol.createConnection(Protocol.java:207)
at
weblogic.rjvm.ConnectionManager.findOrCreateConnection(ConnectionManager.jav
a:997)
at
weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:364)
at
weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:330)
at
weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:228)
at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:188)
at
weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:180)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:149)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:207)
at
weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
textFact
oryDelegate.java:232)
at
weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
textFact
oryDelegate.java:174)
at
weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFact
ory.java
:123)
at
javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:668)
at
javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:246)
at javax.naming.InitialContext.init(InitialContext.java:222)
at javax.naming.InitialContext.<init>(InitialContext.java:198)
at
sky.framework.ejb.SkySessionBean.getInitialContext(SkySessionBean.java:112)
at
sky.framework.ejb.SkySessionBean.setSessionContext(SkySessionBean.java:94)
at
sky.ejb.session.skyreferencesession.SkyReferenceSessionBeanImpl.setSessionCo
ntext(Sk
yReferenceSessionBeanImpl.java:87)
at
weblogic.ejb20.internal.StatelessEJBHome.createBean(StatelessEJBHome.java:22
9)
at
weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.jav
a:90)
at
weblogic.ejb20.pool.StatelessSessionPool.getBean(StatelessSessionPool.java:7
5)
at
weblogic.ejb20.manager.StatelessManager.preInvoke(StatelessManager.java:67)
at
weblogic.ejb20.internal.BaseEJBObject.preInvoke(BaseEJBObject.java:113)
at
weblogic.ejb20.internal.StatelessEJBObject.preInvoke(StatelessEJBObject.java
:55)
at
sky.ejb.session.skyreferencesession.SkyReferenceSessionBeanEOImpl.setDataSou
rce(SkyR
eferenceSessionBeanEOImpl.java:22)
at
sky.ejb.session.skyreferencesession.SkyReferenceSessionBeanEOImpl_WLSkel.inv
oke(SkyR
eferenceSessionBeanEOImpl_WLSkel.java:161)
at
weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
at
weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java
:128)
at
weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
at
weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.
java:103
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:1
7)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
Thanks,
Tom
<Feb 28, 2001 12:42:24 PM EST> <Info> <ConnectionManager> <Bootstrap unable
to get a: 'Protocol
: 'http'' connection to: 'localhost/127.0.0.1' on port: '7001'>
"Kevin Apte" <[email protected]> wrote in message
news:[email protected]...
This advice applies to WL5.1. I have been trying to configure a
multiinstance Weblogic with no success. I want multiple copies
of the sample petStore available for test by multiple users.
I think in 6.0
You would need to open an admin server
Open the configuration file for say PetStore.
Clone the petStore- call it petStore2. .
Create a copy of the startup script and modify it to start PetStore2.
After doing this only one config.xml is created for both servers.
I am able to start the first server and view the petStore application,
On the second server I get an error when I do
http://host:secondServerPort/index.html
How does one create multiple instances in WL6.0 using the console
or using a XML editor ?
Jesse E Tilly <[email protected]> wrote:
[This followup was posted to weblogic.developer.interest.management
and
a copy was sent to the cited author.]
In article <[email protected]>, [email protected]
says...
HI,
I have a WLS running on a Windows NT machine. I wantto configure multiple partition/environment
in that single WLS so that each user will have theirown partition/environment to
play around. Once they are happy with their EJBs thenwe shall move them to a testing
environment. Is that possible in WLS??. Can anyoneplease guide me to a good documentation
about this one.
Many Thanks
Vasan.
PS: I dont want a clustering technology all i wantis that in a single ip i wanna
multiple development environment.
NT isn't a multiuser environment. I will assume that
you mean some
Win32 box sitting in a room where people can copy their
classes/EJBs and
test their stuff. If this is the case, the setup is easy.
Create a directory and startup script for every developer.
Have a
global properties file in the same directory as the scripts
so that
common settings are, well, common. Tell each user to
modify the various
parts of the properties files in their directories to
deploy EJBs and
register servlets, etc etc.
In each startup script, you will have to specify the server
directory
and the binding port for each person. Pick a port (something
easy to
remember and high, like 30000, 30001, etc etc) for each
person. Why?
Well, when they connect to the app server, they'll know
they're hitting
only their server. Also, TCP/IP won't let more than one
JVM bind to the
same port, so if you want simultaneous instances (> 4
you better have
one kick ass Win32 box) you have to do this.
Hope this solves your problem.
JT
Senior Developer, HotelTools INC
[email protected]
Maybe you are looking for
-
Every time I close Firefox and try to restart it my computer leaves a message that I still have Firefox running and that it is unresponsive and needs to be closed. The problem is that there isn't a still-running Firefox to be found, consequently it i
-
Mail need long time to deliver inbound Message
Hi, i send from my external Client (other Domain) an Testmail to my Account on my OS X Server, and in CC to my iCloud Address. The Mail delivers in iCloud direct, but on my OS X Server Account it needs up to 30-60 Minutes. My OS X Server is direct co
-
What do I need to do on the ASA 5520 to be able to use a wildcard SSL cert? I'm running 8.2.5 code.
-
Stalls when trying to connect new site
The bar moves about 1/2 way across the site I want to open then stalls. Sometimes eventually it will open. Otherwise I have force close and start agin. What could be causing this? I'm using 6.02 and 10.7.5
-
I wnt buy apple iphone at/t but i want use in india how to unlock
Lucky4u.avinash