How to configure multiple (virtual) servers?

Hi, I have one public IP (for example: 92.62.26.10)
and 3 servers. Mac Server, Ubuntu Server and Windows server..
Snow Leopard server have 92.62.26.10 & 192.168.1.1
Ubuntu server have 192.168.1.10
Win server have 192.168.1.11
DNS is set to:
mac.domain.com - 92.62.26.10 (it's worked everywhere)
ubuntu.domain.com - 192.168.1.10 (it's not worked everywhere, only in private network or VPN)
win.domain.com - 192.168.1.10 (it's not worked everywhere, only in private network or VPN)
What I need to setup? Proxy or something else?
Thank you
Message was edited by: Jirik.me

You are running an internal DNS server presumably but don't have these hostnames (A-NAME or C-NAME records) set on external DNS servers.
If you run a whois on your domain you can find our who hosts the DNS for the domain if you don't already know. Often DNS hosting companies will have web based tools for you to edit the DNS entries yourself or alternatively you may need to email them and ask them to create the records.
It sounds like you would like to point the addresses ubuntu.domain.com and win.domain.com to the IP address 92.62.26.10 as well. To do this you will have to make sure the services running on each box use a different port to one another. (I.e. You cannot have something running on port 80 on both servers).
Depending on your router also you may only be able to do basic forwarding (I.e. Port 80 forwards to Mac.domain.com; port 443 forwards to ubuntu.domain.com; port 25 forwards to win.domain.com).
If you need more flexibility you may need to get more external IP addresses.

Similar Messages

How to configure multiple smtp servers per domain

Hi,
how do we configure multiple smtp servers per domain/corporate in iplanet messaging server 5.2. i wanted to do this so that i can configure some domains with virus scanning and some domains without antivirus.

Hi Martin,
Well we are trying to run a report without exactly specifying the name of reports server anywhere, e.g. in database or in form or anywhere else. Now if I do not supply a reports server name using RUN_REPORT_OBJECT, the error it displays is FRM-41211: Integration Error : SSL failure ... However if I specify the reports server name in the form, the reports run perfect. Also the name of reports server is specified in rwservlet.properties.
Now the question goes as follows:
Can I run my report from Form without specifying the name of the Reports server anywhere at all. This is so because either an in-process reports server should be picked or the one which is entered in rwservlet.properties should be pickec up by default. Please correct us if we are wrong. once we are through with it, we have to move to Oracle 10gR2 concept of reports server.
Thanks in anticipation,
Ruchi/Saurabh

How to configure multiple report servers in Oracle 10 G R2?

I want to configure multiple report servers with my application deployed on Oracle 10G R2. Since R2 does not support report server clustering, how can this be achieved without any change in the application?
Currently, the application is running with single report server.

Hi Martin,
Well we are trying to run a report without exactly specifying the name of reports server anywhere, e.g. in database or in form or anywhere else. Now if I do not supply a reports server name using RUN_REPORT_OBJECT, the error it displays is FRM-41211: Integration Error : SSL failure ... However if I specify the reports server name in the form, the reports run perfect. Also the name of reports server is specified in rwservlet.properties.
Now the question goes as follows:
Can I run my report from Form without specifying the name of the Reports server anywhere at all. This is so because either an in-process reports server should be picked or the one which is entered in rwservlet.properties should be pickec up by default. Please correct us if we are wrong. once we are through with it, we have to move to Oracle 10gR2 concept of reports server.
Thanks in anticipation,
Ruchi/Saurabh

How to configure multiple RAS servers?

Hi
'Crystal Reports Server Embedded XI R2 - Sizing and Configuration Guide'
It mentions that we can get more license and add the servers in ClientSDKOptions.xml.
<ServerInfos version="2" xsi:type="CrystalReports.ServerInfos" id="1">
<ServerInfo version="2" xsi:type="CrystalReports.ServerInfo" id="2">
    <Server>SERVER1:1566</Server>
    <Adapter>TCPIP</Adapter>
</ServerInfo>
</ServerInfos>
<ServerInfos version="2" xsi:type="CrystalReports.ServerInfos" id="1">
<ServerInfo version="2" xsi:type="CrystalReports.ServerInfo" id="2">
    <Server>SERVER2:1566</Server>
    <Adapter>TCPIP</Adapter>
</ServerInfo>
</ServerInfos>
I tried this and added ClientSDKOptions.xml file in the web application lib directory
Added that to PATH
Our application uses (Crystal-2008 / rasapp.jar /rascore.jar)
com.crystaldecisions.sdk.occa.report.application.ReportClientDocument
When i commented out rcd.setReportAppServer(sn); it is not picking up from the XML file.
I am getting the below error
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException:
There is no server specified.---- Error code:-2147217390 Error code name:serverNotFound
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportAppSession.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportAppSession.int(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportAppSession.initialize(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ClientDocument.for(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.for(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ClientDocument.open(Unknown Source)
at com.crd.report.crystal.CrystalFile.makeRcd(CrystalFile.java:65)
at com.crd.report.crystal.CrystalReportUtil.makeRcd(CrystalReportUtil.java:892)
Please help me how to set up multiple RAS servers.
Thanks
Sumathi

You are running an internal DNS server presumably but don't have these hostnames (A-NAME or C-NAME records) set on external DNS servers.
If you run a whois on your domain you can find our who hosts the DNS for the domain if you don't already know. Often DNS hosting companies will have web based tools for you to edit the DNS entries yourself or alternatively you may need to email them and ask them to create the records.
It sounds like you would like to point the addresses ubuntu.domain.com and win.domain.com to the IP address 92.62.26.10 as well. To do this you will have to make sure the services running on each box use a different port to one another. (I.e. You cannot have something running on port 80 on both servers).
Depending on your router also you may only be able to do basic forwarding (I.e. Port 80 forwards to Mac.domain.com; port 443 forwards to ubuntu.domain.com; port 25 forwards to win.domain.com).
If you need more flexibility you may need to get more external IP addresses.

How to configure multiple virtual hosts for the same context root /

Hi,
I am using Glassfish V1 U1 - b14 on Solaris.
I am trying to configure two applications to be mapped to the / root context, each one in its own virtual host.
Two things I have noticed:
1. I have to manually add virtual-hosts="hostId" in domain.xml/application-ref ... looks like just simply deploying the app does not do that although the application is set as default for its particular virtual host. Is this a bug?
2. Although I have set for each virtual host the default web-app correctly, and they both respond fine, I cannot map both of them to the / context. The second application (chronologically deployed) does not respond when called with the / context ....
Any ideas? Is this a bug again?
Regards,
Rares
Message was edited by:
raresp

Wow, that's a shame. All mighty Application Server and two different apps on two different virtual hosts are considered ambiguous to have the same context root definition.... Fair play to Tomcat and 90% of the rest of servlet containers!
In my case I have the same EAR we are planning to deploy to many (up to 30) virtual hosts. Faking different context roots for each deployment will bring unnecessary overheads...
Should I file a bug or feature request?
Thanks again for your answer, although you're basically saying it is not possible I will wait and look a while for a possible solution before bringing this topic to a conclusion.

How to configure multiple domains in Active directory

HI,
How can I configure multiple domains on Active Directory. When I installed AD it asked for a domain name, there I gave ravigupta.com as domain name. But now I find no way of creating another domain.
I am a java developer and my task is to write a programme which returns all the domains available in LDAP server.
To start with ,I tried to create few domains in LDAP server ( AD ) but stuck up ,as i found there could exist only one domain.
Please tell me how to configure multiple domains in LDAP server ( Active Directory).
I skiped DNS configuration while AD installation.
-ravi

I'm sorry, but you should be asking on a different forum. This has nothing to do with Java.

How to configure multiple listeners to listen for the same instance.

Hello everyone,
I am running oracle database 11g and I want information regarding how to configure multiple listeners to listen for the same database instance. Actually I know how to configure more than one listener but the main thing that I am confused about is when we create listener.ora file, do we have to statically register the database instance with both the listeners or the instance will register itself with both the listeners.
According to my knowledge the instance will register with the listener specified by LOCAL_LISTENER parameter and we cannot have more than one value for this parameter.
Please only give detailed answers with example as I am tired of simple answers with details that I already know.

Hello,
Yes, it can make sense to have several listener for one Oracle instance. For instance you may have one listener for the applications another listener for DBA administration tasks as well as one listener dedicated to dataguard broker. It is not possible to have several listeners listening on the same IP and Port.
By default the database try to automatically register to a listener on port 1521. To instruct the instance to register to a specifc list of listeners you can add in the init.ora the local_listener parameter with an alias definition:
i.e
local_listener=MY_SET_OFF_LISTENERS
in your tnsname.ora add an entry called:
MY_SET_OFF_LISTENERS_LOCAL= (ADDRESS_LIST=
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1530))
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1531))
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1532))
In this sample your instance will register to three listeners listening on respectively port 1530, 1531 and 1532
If you want your clients can be balanced over the 3 listeners

How to configure multiple databases in single listener

Hi,
I want to configure upto 8 standby databases in a server. But I do not know how to configure multiple databases within the listener.
Also can I use the same port number for all the databases.
please give your suggestions.
thankyou
satyanag

Please check (http://download.oracle.com/docs/cd/B10501_01/network.920/a96580/toc.htm)
Jonathan Ferreira
http://oracle4dbas.blogspot.com

How to configura multiple ldap server to the sun access manager

Hi,
please help how to configure multiple ldap server to the sun access manager, for example access manager does't find the user in ldap1 then it should search in ldap2.
Thanks
Mouli

There�s no need for deleting the default amSDK based datastore because it�s needed for some default accounts.
You may try to create the datastore using the commandline (amadmin)
Have a look /etc/opt/SUNWam/config/xml/idRepoService.xml
You may also try to create amadmin account in the external ldap directory.
(Un)fortunately i�ve never tried to remove the default datastore.
-Bernhard

How to configure Apache Virtual Hosts?

Hi, I was wondering, how does configure Apache virtual hosts for Mac OS X Client 10.4.5? At this time, I have added
NameVirtualHost *:80
<VirtualHost *:80>
ServerAdmin [email protected]
DocumentRoot /Library/WebServer/Documents/janus
ServerName janus.php.test
ErrorLog /private/var/log/httpd/janus.php.com-error_log
CustomLog /private/var/log/httpd/janus.php.com-access_log common
</VirtualHost>
Finally, when I try to use the name in the browser, I get the following error message:
Safari can’t find the server.
Safari can’t open the page “http://janus.php.test/” because it can’t find the server “janus.php.test”.
Well, I must go and thanks in advance.
Peace,
-Conrad

If you want to use the fqdn you defined and can/do not want to register it as a Internet Domain you can add it to the hosts file in /etc/hosts if you are comfortable using terminal and the shell
open a terminal
and use the following commands
cd /etc
sudo vim hosts
(you will be prompted for your password here, enter it and hit return)
in vim scroll to the last line which will look like
::1 localhost
type
i
(you are now in insert mode)
type the following line
192.168.0.15 janus.php.test
(replace the ip address with the ip address of the host in question)
hit Control-C
type
:w (vim will confirm in the last line)
type
:q
you are back at the terminal
test your new hosts file by typing
ping janus.php.test
Hope this helps
Mike

How to customize search in WS 7 and for multiple virtual servers?

I'm not clear on how to customize search results pages in Sun Web Server 7. The documentation (the Adminstrator's Guide, page 215) says:
You can take a look at the default search application located at /bin/https/webapps/search as a sample application
but I'm not seeing any such thing. I did a find . -name search -type d from the server root and instance root but the only search directories I'm seeing are subdirectories within the generated directory and they look like system generated jsps that I shouldn't touch (So I didn't :-)
So one question is, where is the default app? A second question is, how do we set up different branding for different virtual servers?
We're currently using WS 6.1 and it has a field in the GUI for the directory containing the web app to use for search. That seems to have disappeared in WS 7.
Any help would be appreciated. Thanks.
Dave

I don't use the search engine, so I'm afriad I don't have direct experience here.
What I'd probably do is modify the app so that it looks at the Host data to determine which directory it should point to for graphics, formatting, etc. You could also use the obj.conf with variables to pull graphics from directories appropriately branded. Something like:
1) Create "additional doc directory" for images
2) Find the entry in the obj.conf that points to the new directory
3) Modify the path to something like /path/to/$host/images
4) Make sure you create directories like:
/path/to/foobar.com/images/
/path/to/www.foobar.com/images/
/path/to/baz.com/images/
/path/to/www.baz.com/images/

Multiple Virtual servers, one listener setup

I am trying SJS 7 as a Proof of Concept project to replace our existing iPlaney 6 and Netscape 2 server instances.
My question is how do I setup SJS to have one http listener on port 80, but be able to handle multiple websites? I want to use a CNAME under our DNS and then have the SJS environment look to see what the domain name is and point it to the correct directory when called upon via web browser.
Under our DNS, each stub file has something like:
mysite IN CNAME devsite.mydomain.com
mysite2 IN CNAME devsite.mydomain.com
Under our Apache's virthost.conf, I just need to do the following:
<VirtualHost mysite.com>
ServerName mysite.com
DocumentRoot /web/mysite.com/htdocs
ErrorLog /var/web/mysite.com/error_log
CustomLog /var/web/mysite.com/access_log common
ScriptAlias /cgi-bin/ "/web/mysite.com/htdocs/"
<Directory /web/mysite.com>
Options Indexes FollowSymLinks Multiviews +Includes
AllowOverride All
</Directory>
</VirtualHost>
<VirtualHost mysite2.com>
ServerName mysite2.com
DocumentRoot /web/mysite2.com/htdocs
ErrorLog /var/web/mysite2.com/error_log
CustomLog /var/web/mysite2.com/access_log common
ScriptAlias /cgi-bin/ "/web/mysite2.com/htdocs/"
<Directory /web/mysite2.com>
Options Indexes FollowSymLinks Multiviews +Includes
AllowOverride All
</Directory>
</VirtualHost>
I setup two virtual servers under one configuration, but the http-listener-1 instance only wants to point to one virtual server instance rather than the pair. I tried to add a 2nd http-listener, but it won't allow me to use the same CNAME address nor port 80 for it as well.
How do I do the same thing that I do with Apache virthosting under SJS 7?
-- Michael

I took a look at the server.xml file, and I currently have this:
<http-listener>
<name>http-listener-1</name>
<ip>sjsdev.mysite.com</ip>
<port>80</port>
<server-name>sjsdev.mysite.com</server-name>
<default-virtual-server-name>screwball</default-virtual-server-name>
</http-listener>
<virtual-server>
<name>screwball</name>
<http-listener-name>http-listener-1</http-listener-name>
<host>sjsdev.mysite.com</host>
<object-file>screwball-obj.conf</object-file>
<document-root>/web/screwball.mysite.com/htdocs</document-root>
<log-file>/web/screwball.mysite.com/logs/server.log</log-file>
</virtual-server>
<virtual-server>
<name>fastball</name>
<http-listener-name>http-listener-1</http-listener-name>
<host>sjsdev.mysite.com</host>
<object-file>fastball-obj.conf</object-file>
<document-root>/web/fastball.mysite.com/htdocs</document-root>
<log-file>/web/fastball.mysite.com/logs/server.log</log-file>
</virtual-server>
I bounced the listener and virtual hosts then tried using a browser for testing.
If I go to http://screwball.mysite.com, it goes to the correct htdocs directory.
If I go to http://fastball.mysite.com, it goes to the screwball htdocs directory instead.
Also, is it possible to make these configuration changes via the Administration web GUI?
Trying to document this as much as possible, mostly via screenshots, for other team members.
-- Michael

How to configure multiple IP-Adresses on one NIC in OVM

Hi guys,
we have some OVM Servers 2.2.1 installed. They all have three NICs in them (eth0-2). For eth0 and eth2 we need multiple IP-Adresses configured to work with our storage solution. The configuration should look like this:
eth0:0 - 192.168.31.x
eth0:1 - 192.168.33.x
eth1 - 192.168.0.x
eth2:0 - 192.168.32.x
eth2:1 - 192.168.34.x
I tried creating gonfig files ifcfg-eth0:0 in /etc/sysconfig/network-scripts with the following content
DEVICE=eth0:0
BOOTPROTO=static
ONBOOT=yes
NETMASK=255.255.255.0
IPADDR=192.168.31.3
TYPE=Ethernet
HWADDR=00:1b:21:06:f0:fa
But it does not work. Neither eth0:0 nore an additional xenbr is configured when i restart.
I can configure multiple ip addresses for xenbr0 by calling something like "ifconfig xenbr0 192.168.31.x". But these settings get lost as sonn as i reboot the server.
I have already searched google, forums and blogs for a solution but could not find one. I thought that this should be a pretty common task. In "normal" linux it is not an issue at all.
Has somebody any experience with a setup like this? I would really apreciate your help.
Thanks
Marek

Hi,
configuring IP aliasses seems to work the same way like configuring VLANs. You will have to configure the appropriate bridges at system startup manually.
E.g. this little script is what I use to configure VLANs and briges on my OVM:
#!/bin/bash
echo "Configuring VLANs and bridges\n"
echo "Configuring VLAN 24 on eth2"
vconfig add eth2 24
brctl addbr br2.24
brctl addif br2.24 eth2.24
ifconfig eth2.24 up
ifconfig br2.24 up
echo "Configuring VLAN 31 on eth2"
vconfig add eth2 31
brctl addbr br2.31
brctl addif br2.31 eth2.31
ifconfig eth2.31 up
ifconfig br2.31 up
This script is run at startup by init using this startup skript in /etc/init.d, which is what I think you're missing as you can already seem to bring up the needed IPs manually - you'd have to change the chkconfig accordingly, that is make sure that the config script gets startet after the network has been brought up, like this: # chkconfig: 2345 11 91
[root@oraclevm01 ~]# cat /etc/init.d/vlan-config
#! /bin/bash
# vlan-config configure VLANs
# chkconfig: 2345 11 89
# description: Configures VLANs at boot time before the \
# network is started.
### BEGIN INIT INFO
# Provides: $vlan
### END INIT INFO
# Source function library.
. /etc/init.d/functions
if [ ! -f /etc/vlan-config ]; then
exit 0
fi
# See how we were called.
case $1 in
     start)
               # configure vlans
               /etc/vlan-config
          echo $"Usage: $0 {start}"
          exit 1
esac
exit 0
Hth,
budy
Edited by: budachst on Jun 29, 2011 8:11 AM

How to configure multiple IP addresses on one NIC?

Hi,
I just installed a OVM Server in version 3.2.1 and the according VMManager. Now i wanted to try to configure the Server/Server Pool. Now i come across a problem, which was already a big problem in OVM 2 while configuring the Networks.
All our OVM Servers have three NICs in them. One is for VMs and Management, the others are for connection to our SAN (Dell PowerVault MD 3220i). My problem is, that due to the network setup, the two NICs for storage need two IP addresses in two different networks each. This shouldn't be a problem, because usually in linux all you have to do is configure something like eth1:1. I remember having huge trouble configuring it in our OVM 2 cluster up to the point where I had to write a shell script to configure the second IP.
Anyways, I have configured two of the storage networks on eth1 and eth2 of the VM Server. Now i cannot configure any more IP addresses, because eth1 and eth2 are not available anymore for configuration in a third network. I really hoped that it would be possible in OVM 3 to configure multiple IP addresses. And probably it is only my lack of knowledge of how to configure it.
So any advice is well appreciated.
Thanks!
Regards,
Marek Hubatka

You should be able to do this by using "VLAN Groups".
http://docs.oracle.com/cd/E35328_01/E35332/E35332.pdf
Check out the VLAN groups section. You must great the VLAN groups before you can assign them to interfaces.

How to configure multiple dev environment in single IP

HI,
I have a WLS running on a Windows NT machine. I want to configure multiple partition/environment
in that single WLS so that each user will have their own partition/environment to
play around. Once they are happy with their EJBs then we shall move them to a testing
environment. Is that possible in WLS??. Can anyone please guide me to a good documentation
about this one.
Many Thanks
Vasan.
PS: I dont want a clustering technology all i want is that in a single ip i wanna
multiple development environment.

Tom,
looks like you are specifying http protocol in
sky.framework.ejb.SkySessionBean.getInitialContext method.
Change it to t3 or, if the JNDI lookup is in the same JVM, don't specify
PROVIDER_URL. If you have to use http tunneling due to any reason , you have to
enable HTTP Tunneling in server to which initial context is created. It is
disabled by default in 60. You can do so via console. Please refer to
documentation , let me know if you need additional help.
Viresh Garg
Principal Developer Relations Engineer
BEA Systems
Tom Purcell wrote:
Kevin,
You said that with 6.0 the following happens:
On the second server I get an error when I do
http://host:secondServerPort/index.html
Is this the error you get on the Admin Server:
<Feb 28, 2001 12:42:24 PM EST> <Info> <HTTPTunneling> <Login rejected with
code: 'Failed', reas
on: You are trying to use http tunneling
The server will not let you connect'>
<Feb 28, 2001 12:42:24 PM EST> <Error> <HTTP> <Problem dispatching servlet
request
weblogic.common.T3Exception: You are trying to use http tunneling
The server will not let you connect
at weblogic.socket.TunnelLogin.rejectConnection(TunnelLogin.java:87)
at weblogic.socket.TunnelLogin.service(TunnelLogin.java:59)
at
weblogic.servlet.internal.MuxableSocketHTTP.dispatch(MuxableSocketHTTP.java:
467)
at
weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:638)
at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
And on the Managed Server:
<Feb 28, 2001 12:42:24 PM EST> <Error> <ConnectionManager> <Could not
connect to: '0S:127.0.0.1
:[-1,7001,-1,-1,-1,-1,-1]'
java.net.ProtocolException: Tunneling result unspecified - is the HTTP
server at host: 'localho
st' and port: '7001' a WebLogic Server?
at
weblogic.rjvm.http.HTTPClientJVMConnection.handleNullResponse(HTTPClientJVMC
onnectio
n.java:152)
at
weblogic.rjvm.http.HTTPClientJVMConnection.connect(HTTPClientJVMConnection.j
ava:194)
at
weblogic.rjvm.http.HTTPClientJVMConnection.createConnection(HTTPClientJVMCon
nection.
java:98)
at weblogic.rjvm.Protocol.createConnection(Protocol.java:207)
at
weblogic.rjvm.ConnectionManager.findOrCreateConnection(ConnectionManager.jav
a:997)
at
weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:364)
at
weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:330)
at
weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:228)
at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:188)
at
weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:180)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:149)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:207)
at
weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
textFact
oryDelegate.java:232)
at
weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
textFact
oryDelegate.java:174)
at
weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFact
ory.java
:123)
at
javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:668)
at
javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:246)
at javax.naming.InitialContext.init(InitialContext.java:222)
at javax.naming.InitialContext.<init>(InitialContext.java:198)
at
sky.framework.ejb.SkySessionBean.getInitialContext(SkySessionBean.java:112)
at
sky.framework.ejb.SkySessionBean.setSessionContext(SkySessionBean.java:94)
at
sky.ejb.session.skyreferencesession.SkyReferenceSessionBeanImpl.setSessionCo
ntext(Sk
yReferenceSessionBeanImpl.java:87)
at
weblogic.ejb20.internal.StatelessEJBHome.createBean(StatelessEJBHome.java:22
9)
at
weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.jav
a:90)
at
weblogic.ejb20.pool.StatelessSessionPool.getBean(StatelessSessionPool.java:7
5)
at
weblogic.ejb20.manager.StatelessManager.preInvoke(StatelessManager.java:67)
at
weblogic.ejb20.internal.BaseEJBObject.preInvoke(BaseEJBObject.java:113)
at
weblogic.ejb20.internal.StatelessEJBObject.preInvoke(StatelessEJBObject.java
:55)
at
sky.ejb.session.skyreferencesession.SkyReferenceSessionBeanEOImpl.setDataSou
rce(SkyR
eferenceSessionBeanEOImpl.java:22)
at
sky.ejb.session.skyreferencesession.SkyReferenceSessionBeanEOImpl_WLSkel.inv
oke(SkyR
eferenceSessionBeanEOImpl_WLSkel.java:161)
at
weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
at
weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java
:128)
at
weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
at
weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.
java:103
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:1
7)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
Thanks,
Tom
<Feb 28, 2001 12:42:24 PM EST> <Info> <ConnectionManager> <Bootstrap unable
to get a: 'Protocol
: 'http'' connection to: 'localhost/127.0.0.1' on port: '7001'>
"Kevin Apte" <[email protected]> wrote in message
news:[email protected]...
This advice applies to WL5.1. I have been trying to configure a
multiinstance Weblogic with no success. I want multiple copies
of the sample petStore available for test by multiple users.
I think in 6.0
You would need to open an admin server
Open the configuration file for say PetStore.
Clone the petStore- call it petStore2. .
Create a copy of the startup script and modify it to start PetStore2.
After doing this only one config.xml is created for both servers.
I am able to start the first server and view the petStore application,
On the second server I get an error when I do
http://host:secondServerPort/index.html
How does one create multiple instances in WL6.0 using the console
or using a XML editor ?
Jesse E Tilly <[email protected]> wrote:
[This followup was posted to weblogic.developer.interest.management
and
a copy was sent to the cited author.]
In article <[email protected]>, [email protected]
says...
HI,
I have a WLS running on a Windows NT machine. I wantto configure multiple partition/environment
in that single WLS so that each user will have theirown partition/environment to
play around. Once they are happy with their EJBs thenwe shall move them to a testing
environment. Is that possible in WLS??. Can anyoneplease guide me to a good documentation
about this one.
Many Thanks
Vasan.
PS: I dont want a clustering technology all i wantis that in a single ip i wanna
multiple development environment.
NT isn't a multiuser environment. I will assume that
you mean some
Win32 box sitting in a room where people can copy their
classes/EJBs and
test their stuff. If this is the case, the setup is easy.
Create a directory and startup script for every developer.
Have a
global properties file in the same directory as the scripts
so that
common settings are, well, common. Tell each user to
modify the various
parts of the properties files in their directories to
deploy EJBs and
register servlets, etc etc.
In each startup script, you will have to specify the server
directory
and the binding port for each person. Pick a port (something
easy to
remember and high, like 30000, 30001, etc etc) for each
person. Why?
Well, when they connect to the app server, they'll know
they're hitting
only their server. Also, TCP/IP won't let more than one
JVM bind to the
same port, so if you want simultaneous instances (> 4
you better have
one kick ass Win32 box) you have to do this.
Hope this solves your problem.
JT
Senior Developer, HotelTools INC
[email protected]

How to configure multiple (virtual) servers?

Similar Messages

Maybe you are looking for