How to configure my AEBS to port fowarding?

The problem is that i cannot give or receive any webcam from my friend on aMsn or Yahoo Messenger. I know that i need to give a static IP to my computer and do port fowarding but i dont know how.
We have two iMac here, that are connected to internet via my AEBS. Secondly, I use a airport Express to stream music in my receiver and to connect my blu-ray my disc player and my Wii to internet.
So how arranged that without creating problem with my whole network?
Please, I would appreciated a clear method like 1- go to,... 2- click on,...
Thanks

Hello IacsaP. Welcome to the Apple Discussions!
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): <enter the appropriate UDP port values>
o Public TCP Port(s): <enter the appropriate TCP port values>
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): <enter the same as Public UDP Ports or your choice>
o Private TCP Port(s): <enter the same as Public TCP Ports or your choice>
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

Similar Messages

  • How to configure FXO and FXS port?

    hi,
    can anyone help me on how to configure FXO port on 2820 router and FXS port on 2810.
    What are the things i need to configure to make a voip network that connect to PSTN network and PBX?

    hi
    do refer this link which can provide you fair idea to get started with your configs.
    http://www.cisco.com/en/US/partner/tech/tk1077/tech_configuration_examples_list.html
    regds

  • How to configure the sort and port of a SOAP address dynamically

    Hi All,
    In the “wsdl” we have the SOAP Address defined but in practice we would like to configure the host and the port. As the server on which the service resides may/will change.
    For example:
    http://usciq74.wdf.sap.corp:50077/sap/bc/srt/rfc/sap/CPM_PLANNING_HISTORY?sap-client=003
    We would like to configure the proxy to point to say:
    http://<host>:<port>//sap/bc/srt/rfc/sap/CPM_PLANNING_HISTORY?sap-client=003
    What we see in the Proxy Code is:
    port.setSOAPAddress(new com.sap.flex.ws.runtime.SOAPAddress("http://usciq74.wdf.sap.corp:50077/sap/bc/srt/rfc/sap/CPM_PLANNING_HISTORY?sap-client=003"));
    How could this be achieved.
    Please help.

    Hi Sumit,
    Thanks for the quick response. However, I do not want to change the host and the port in the wsdl. I want it to be so, that it will pick the host and port dynamically(as you have mentioned). However, in out case, the web service has the SOAP address hardcoded as <b>http://usciq74.wdf.sap.corp:50077</b>.
    We would want to write something as http://host:port and then let it pick the host and port dynamically. How is that possible.
    Best Regards,
    Debashree.

  • How To Configure non-standard SMTP port

    My ISP has blocked port 25. I have a service that will deliver mail to the port of my choosing. How do I configure Leopard Server to listen on a non-standard SMTP port? 2525 for example.
    Also, I assume all I have to do on my Airport Express is set up NAT to rake external port 2525 and point it to the private address of my email server on port 2525. Is this correct?
    Thanks,
    -ernie

    Assuming such is offered, look to acquire a business-class ISP service level, and move on to the next issue? The business-class services typically provide static IP address(es), opens up server ports, and sets up DNS and ISP-side server connections for your hosts. And you can call your ISP or other assistance when your network craters; non-standard connections are (as you've found) harder to support.
    One subtlety here: in a number of cases, simply having a business-class service means you're supported by a different group within (larger) ISPs. This can be a significant advantage at times, given that the scripts and tools and such that are available for the business group will be rather more targeted than the scripts that are available for the residential services group at the ISP.
    There are a number of folks that have sought and have tried this (try a few Google searches for SMTP and non-standard port), and it mostly works. But it is fragile, and tends to be derailed when something goes weird, or when the ISP spots and shapes or blocks the server traffic.
    Also check your ISP's terms of service here, lest your network pipe be subject to summary disconnection.
    The other option is to VPN or tunnel into to a co-lo or dedicated server or a virtual hosting service; to run your servers or virtual servers somewhere without firewalls blocking the standard ports.

  • How To Configure TREX Name Server&Port for UDDI  Service Registry Settings

    Hello Experts,
    we are using CE 7.1 SP 4 and I would like to use the trex service in the Service Registry.
    I use \NWA\Service Registry Configuration\Service Registry Settings\Keyword Search and want to test the TREX Communication using the Test Connection Button.
    If I do so, I receive "Connection to TREX not successful".
    When I press the Update TREX button I receive this exception:
    com.sapportals.trex.TrexException: TREX Name Server (including back-up servers) is down or not accessable. (Errorcode 7217)
    I tried to configure the trex.service with the two parameters: nameserver.address and nameserver.backupserverlist -> tcpip://myhostname.mydomain:30001 (Instance 00).
    I am not sure if the port number is correct -> is there a way to lookup the correct port number?
    Is there something else I should configure?
    Thanks for help, best regards
    Thomas

    Hi Ganesh,
    In order to access the Visual Administrator, go to Start > Programs > SAP J2EE Engine > Visual Administrator. After you login, you will see 2 nodes i.e. Dispatcher and Server. Expand the Server node. Then go to "Services" and expand it. Then go all the way down to "TREX Service". Then on the right hand side, go to the property "nameserver.address" where you will key in "tcpip://<nameserver>:<port>". Then hit "Update" and click on the "Save" button. Then when you go to TRex Monitor, you should be able to see the Name Server running. Hope this helps.
    Thanks,
    Sri
    P.S Please rewards points if you find this helpful. Thanks.

  • How to configure SMTP dynamic send port?

    Hi,
    I am trying to configure STMP send port to send emails, enabled SMTP Server on the DEV box and configured it as described in the link below.
    https://sandroaspbiztalkblog.wordpress.com/2013/05/09/biztalk-2013-installation-and-configuration-install-and-configure-smtp-server-feature-part-4/
    Able to send emails using Telnet client, and these email get stored in C:\inetpub\mailroot\Queue folder.
    I have a dynamic send with following values.
    msgEMail(SMTP.CC) = “[email protected]”;
    msgEMail(SMTP.DeliveryReceipt) = False;
    msgEMail(SMTP.From) = “[email protected]”;
    msgEMail(SMTP.ReadReceipt) = False;
    msgEMail(SMTP.Password) = “XXX;
    msgEMail(SMTP.Username) = “DDD”;
    msgEMail(SMTP.SMTPAuthenticate) = System.Convert.ToUInt32(XX.SMTPAuthenticate);
    msgEMail(SMTP.SMTPHost) = “smtp.domain.local”;
    msgEMail(SMTP.Subject) = “sdfgdfgd;
    msgEMail(SMTP.MessagePartsAttachments) = 2;
    Message gets suspended with the following error message.
    A message sent to adapter "SMTP" on send port "XXX_DynamicSendPort_XXXX" with URI "mailto:
    [email protected]" is suspended.
     Error details: There was a failure executing the send pipeline: "Microsoft.BizTalk.DefaultPipelines.XMLTransmit,
    Microsoft.BizTalk.DefaultPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=81bf3856ad764e35" Source: "XML assembler" Send Port: "XXX_DynamicSendPort_XXXXX URI: "mailto:localhost" Reason: Data at the root level is invalid.
    Line 1, position 1. 
     MessageId: 
    {3C50F418-24C4-4661-9B34-4B7F5F6FBBA4}
     InstanceID: {2F6B9A0E-92EE-4953-81D2-9A124FAC99CE}
    Please can some advise me what is wrong here? do you think I have configured
    msgEMail(SMTP.SMTPHost) property correctly? Or should it be the name of the DEV box?
    Thanks
    SS
    Shiva Sadayan

    Hi Shiva,
    You should not be using XMLTransit pipeline at the send port.
    Perhaps you should go with default passthrough pipeline or
    Create a send pipeline with MIME/SMIME encoder and drop it at Encode section of pipeline. Accept the default settings for MIME/SMIME encoder and use it with the dynamic port.
    I found this article very useful while sending email from BizTalk. Refer:
    Sending Emails in Biztalk
    Rachit
    Please mark as answer or vote as helpful if my reply does

  • How to configure smar host iron port

    Hi All,
    we have messaging server 6.3 we want to pass all mail through ironport,which file we have to mention smart host ironport.
    Regards
    kamal

    kkdas wrote:
    we have messaging server 6.3 we want to pass all mail through ironport,which file we have to mention smart host ironport.Refer here:
    http://docs.sun.com/app/docs/doc/819-4428/bgaqy?a=view
    Regards,
    Shane.

  • How to make single port fowarding  for camera by using airport extreme  ???

    hi
    I have airport extreme model no A1143 (apple)
    when I was using linksys ,I have camera
    I reserve IP local for camera and then by aplication single port foward I put IP local for camera so I would get for the picture or video
    Is any body can help by using apple airport extreme model no A1143
    where should I put the IP local for the camera ?which application
    thanks
    Message was edited by: charlie368

    charlie368, Welcome to the discussion area!
    Using AirPort Utility you can configure the AirPort Extreme base station (AEBS) to forward the port(s) to the camera. However the camera will need to be assigned a local IP address. The default local IP addresses are in the 10.0.1.x range.
    To get to the camera from the internet, you would use the IP address provided by your ISP. This is the one used by the WAN side of the AEBS.

  • What are some of the best iOS apps can remotely played videos, audios, photos and text files from a NAS hdd connected to Airport Extreme USB port? And how to configure this setup?

    I have already set up NAS hdd as connecting it at USB port of Airport Extreme, i also want to remotely access it from iPhone, so what's the next step? What are some of the best iOS apps can remotely played videos, audios, photos and text files from the NAS hdd and how to configure this setup?

    *Edit - I am not able to connect to the NAS when hardwired to the airport extreme.

  • How to Configure SMTP Port in ODI

    Hi,
    Someone know how to configure SMTP port in the ODI tool? I tried changing the port number in the odiparams but I still encountered an error:"Could not connect to SMTP host." when executing the odisendmail package object though I can access the SMTP Server thru tracetcp.
    TIA,
    Cathy

    950484 wrote:
    Hi Bhabani,
    Thanks for the quick response :) . I saw your post and its a nice approach in sending mail instead of using an odi package object odisendmail. However, the requirement is not to use the gmail credentials but to use the credentials provided to us. But I noticed that the port used for the SMTP server is not the default port number which is 25. So I am guessing that the reason why I cannot connect to the SMTP host is because of the port number. Do you know how to solve this?If you want to change the SMTP port then do the following
    edit smtplib.py located at <ODI_HOME>/oracledi/lib/scripting/LIB
    change SMTP_PORT to what ever port you want .
    restart ODI
    execute your mail sending program

  • How to configure the eth1 port of NIcRIO 9024 to another IP address and subnet mask

    Hi ,
    I am using cRIO 9024 and am planning to configure it to be an MMS server that interacts with a client which is in another network with different IP and subnetmask. I want to run the server VIs from the host computer via the eth0 port and want to communicate the MMS messages through the eth1 port. the eth0 port is configured as a static IP as shown in the screenshot attached and would like to assign a separate IP and subnet mask to the other port . But when I try to save the configuration I get the error "Could not save your changes tot he target.The subnet mask for eth1 is invalid" .
    I have already directly cross connected the Crio and have disabled the firewalls and still am not able to configure it.
    1) is it possible to configure the ethernet ports to have separate IPs corresponding to different networks and thus the subnet masks?
    2) If its possible then what is the mistake i am doing while configuring it ?
    I would be extremaly grateful to have a reply on this as its pretty desperate to spend a lot of time just to set up the IP configurations..!!!!!
    Regards
    Abhinav

    Dear Abhinav,
    I'm sorry but what you are tryining to do is not suported by the Second Ethrnet Port on any cRIO and so you getting this error meeage.
    Here a abstract out ouf the KnowledgeBase How do I Configure the Dual Ethernet Ports on Real-Time Controllers?:
    Ethernet port 2 is currently not supported to communicate outside its own subnet. There is no capability of configuring the Default Gateway for Ethernet port 2 and therefore cannot connect to a large isolated intranet.  However, there appears to be a common misconception that this port can only be used for communication between NI products: this is not the case, though any communication through the secondary port must be within the same subnet.
    Kind Regards,
    SG3 | Applications Engineering | National Instruments | NIG |

  • How to Port Foward Xbox One?

    I don't know how to port foward the Xbox One to make the NAT type Open with my AT&T Unite Express device. I see the port fowarding option in the device's website, but don't know how to do it. Please help!

    I'm having the same issue, has anybody managed to resolve this?

  • How to configure a parallel printer to a USB port?

    Hi people....I'm trying to set up our old, trusty Laserjet 5P with our new G70 using a USB to parallel cable, but to no avail. Any ideas on how to configure this odd couple so that they can live and work in harmony? My wife would rather lose me than have to give up her printer. 
    This question was solved.
    View Solution.

    In addition to the printer driver shich you have installed you may also need a driver for the USB to parallel converter.  The other thing I would check would be the port settings, the converter may provide an emulated LPT1: port, but it may be a different port.  Make sure you are using the correct port.
    Regards,
    Bob Headrick, Microsoft MVP Printing/Imaging
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Pa-mc-8te1 can i use this a ethernet POrt how to configure it ...

    pa-mc-8te1 can i use this a ethernet POrt how to configure it ...

    Hi Venkat,
    Please ask this question in routing/switching forum. As far as i know you can only configure pa-mc-8te1 as E1 or T1 ports. For more details please visit the below link.
    http://www.cisco.com/c/en/us/td/docs/interfaces_modules/port_adapters/install_upgrade/multichannel_serial/8-port_multichannel_t1-ei_8pri_install_config/8port_t1/2738ovr.html
    Regards,
    Kanwal
    Note: Please mark answers if they are helpful

  • How to configure SMTP on a different port?

    Hi All,
    We have just moved one of our BO servers to a cloud based environment and the exchange server in our new environment uses a different port instead of the default port 25.
    Though we have configured all job servers in CMC to use the new port the error message we get when we schedule a report still indicates we are using port 25. Is there like a conifuration file or xml where we need to update this? If not, is there any other way to configure email destination on a different port?
    We are using BO XI 3.1 SP3, MySQL repositiry, Tomcat server.
    Error message we get:
    server error. [Error initializing SMTP server. Return code: [TCP send failed.]. Reason: [X.Y.Z.A:25].]: [CrystalEnterprise.Smtp]
    Thanks in advance...
    Thanks,
    Hari...

    Thanks for the reply. Here is my situation explained.
    We have a few WebI reports that need to be scheduled as Excel and PDF on a regular basis[weekly] to few users. These schedules work fine in our test environment where the Mail server is configured on port 25. However in our production enviornment , Mail server is configured on a different port. What I can confirm is that the port is open and if I try emailing through command prompt, I can connect the exchange server and send emails.
    I have changed the setting on all Job servers [Adaptive Job Server, CrystalReports Job Server, DeskI Job Server, Destinaton Job Server, LOV Job Server, Program Job Server and Publication Job server], but still the email schedules fail and I am confused because the failure message [as in my first post] says it failed over port 25. Where is it still picking up Port 25 from though I have changed the confiuration on all Job servers?
    Any guidance will be greatly appreciated.

Maybe you are looking for