How to configure my extender if im on the pay-as-you go plan

I purchased a samsung extender. It says on the page and in the manual to setup myself as a priority on my extender. After a number of discussions with support I was told that as a pay-as-you-go client *I CANNOT SET MYSELF AS A PRIORITY* on my extender.
This is a real issue as im in a apt complex and it has been used by others so much I get bumped off my own extender.
Im also not very happy about the internet usage by others on my home networking. At times thier 3G use is taking up a lot of my home network bandwidth and causing me to have slow internet.
So I need to set my extender to have my cell as a priority. How do I do this ?
I *REALLY* need to make it private as the internet use by others via 3G is using up all my home connection bandwidth so I experence extremely slow internet speeds on my home computer. Having these be open to the public is a insanely stupid thing when 3G speeds are involved as they will surely use up the bandwidth of the home connection by strangers.

IF you had exactly $50 in your account and a portion of it was deducted for some sort of fee which you were assessed, dropping your account balance under $50, then you would have automatically been switched to the pay as you go plan.
It is best to keep a bit above the amount due in your account for just this type of occurrence.
Good luck.

Similar Messages

  • How to configure multiple listeners to listen for the same instance.

    Hello everyone,
    I am running oracle database 11g and I want information regarding how to configure multiple listeners to listen for the same database instance. Actually I know how to configure more than one listener but the main thing that I am confused about is when we create listener.ora file, do we have to statically register the database instance with both the listeners or the instance will register itself with both the listeners.
    According to my knowledge the instance will register with the listener specified by LOCAL_LISTENER parameter and we cannot have more than one value for this parameter.
    Please only give detailed answers with example as I am tired of simple answers with details that I already know.

    Hello,
    Yes, it can make sense to have several listener for one Oracle instance. For instance you may have one listener for the applications another listener for DBA administration tasks as well as one listener dedicated to dataguard broker. It is not possible to have several listeners listening on the same IP and Port.
    By default the database try to automatically register to a listener on port 1521. To instruct the instance to register to a specifc list of listeners you can add in the init.ora the local_listener parameter with an alias definition:
    i.e
    local_listener=MY_SET_OFF_LISTENERS
    in your tnsname.ora add an entry called:
    MY_SET_OFF_LISTENERS_LOCAL= (ADDRESS_LIST=
    (ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1530))
    (ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1531))
    (ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1532))
    In this sample your instance will register to three listeners listening on respectively port 1530, 1531 and 1532
    If you want your clients can be balanced over the 3 listeners

  • How to configuration of pricing procedure based on the Region

    Hi,
    please help me how to configuration of pricing procedure based on the Region in the roll out project.
    Thanks
    mustafa

    What I proposed to do was,
    a. Create routes like 0 day route, 1 Day route, 2 day route etc.
    b. Route determination is based on the Shipping condition of the customer. Put in the shipping condition for the customer as 00 - immediate delivery. 01 - By Truck, 02 - By Rail, 03 - Ship etc
    c. Now, put in your route determination in such a way that routes change in the sales order with shipping condition (SC). Like, if the shipping condition is set to 00, then 0 day route comes up. Meaning immediate delivery, if SC is 01, then your normal route by truck picks up. etc.
    When the sales order is manually created, you know the time of creation. As route is one of the criteria, the material confirmation happens based on number of days you put in the route to reach the destination. Now that you have the material available for today's delivery, the delivery program can be run to create it, or it can be manually created.
    Now, when you configure the route you have to specify 'Transit duration in calendar days'.
    When you have the sales order created electronically (say thru EDI), then, you may have to ask them to send in shipping condition. Else, you have to modify the function module Idoc_input_orders in such a way that if the sales order creation time is < 12 PM, then put shipping condition as 00, else copy what ever is there in the customer.
    If you do not want to check the time manually when the user creates the sales order, then you may have to use the user exit MV45AFZZ (and I think you can use Save_order_prepare) to check the time and change the shipping condition. By this you will avoid extra coding in Idoc_input_orders and also need not bother if the user changed the route or not.
    Hope my explanation helps.
    Regards,
    Mukund S

  • Could you please tell me how to configure NSP as « trusted » system  in the latest trial version of NetWeaver?

    Hi,
    Could you please tell me how to configure NSP as « trusted » system in the latest trial version of NetWeaver?
    Please see the attachment.
    Thanks,
    Marc

    Hi Marc,
    go to transaction STRUSTSSO2, generate a certificate for your system, then add it to certicate list and to ACL for your client.
    There will probabely be  several parameters to set in instance profile if you plan to use SSO.
    Best regards,
    Vincent

  • SP 2013 Upgrade error - web application is configured with claims authentication mode however the content database you are trying to attach is intended to be used against a windows classic authentication mode.

    Hi there,
    I get this error when I perform a DB Attach upgrade from SharePoint 2010 to SharePoint 2013. 
    "web application is configured with claims authentication mode however the content database you are trying to attach is intended to be used against a windows classic authentication mode."
    Any help is appreciated. Thanks.

    There is other way of fixing this issue apart from what Amit mentioned. Create a classic based web application in SP 2013 using PowerShell.
    New-SPWebApplication -Name "TestApplication" -ApplicationPool "TestApplicationAppPool" -AuthenticationMethod "NTLM" -ApplicationPoolAccount (Get-SPManagedAccount "sppoc\spfarm") -Port 100 -URL "http://sp2013demo"
    Now mount the content database from SP 2010 on to the web application created above 
    Mount-SPContentDatabase WSS_Content_100 -DatabaseServer SQL2012Demo -WebApplication http://sp2013demo:100
    Once the mount is complete, convert the web application to use claims and migrate the user to use claims identity.
    Convert-SPWebApplication -Identity "http://sp2013demo:100" -To Claims –RetainPermissions -Force
    $w = Get-SPWebApplication "http://sp2013demo:100"
    $w.MigrateUsers($True)
    See my blog post about it: http://www.sharepointnadeem.com/2014/01/upgrade-from-sharepoint-2010-classic.html
    Please remember to up-vote or mark the reply as answer if you find it helpful.

  • How to configure oracle dataguard for connecting to the second nic.

    hi
    i want deploy my oracle dataguard on a remote site on a separate lease line
    and on the second nic of the primary. i just have a concern that what
    configurations should be made in the primary or standby to make sure the replication can work as the first nic is connected to receive the general database
    data and the second nic is being planned for replication only.
    so how standby will come to know that it has to pick which one of then.
    waiting for an early reply
    manish lall
    [email protected]

    thanks for the reply
    does that mean nothing is to be needed to configure for oracle standby as such.
    can you give me some idea of how this ip routing configuration will be done

  • How to configure QOS on certain IP in the Cisco ASA 5510

    Hi,
    I am need to configure QOS on certain IP in the Cisco ASA 5510. Assume the IP's are 10.0.1.5 , 10.0.1.6 , 10.0.1.7. Here i have to configure 512 KBPS for 10.0.1.5 and 2 MBPS for 10.0.1.6 and 10.0.1.7
    Can this done on a ASA 5510 series? if yes can you help me how ?
    Regards,
    Venkat

    Yes you can do it.You can match the ip addresses in an access-list, put in a class-map and the class-map in a policy map that will do policing.
    Good examples for what you want to do are here https://supportforums.cisco.com/docs/DOC-1230
    I hope it helps.
    PK

  • How can I read Extended APDU input to the same buffer

    The following is the code I am currently using where inBuffer is an intermediate array of 1000 length. However, I do not want to allocate any buffers at all, and just want to send a command apdu of 1000 byte length and modify it in the code and return the modified buf in the response APDU.
    // Read extended APDU input
    byte[] buf = apdu.getBuffer();
    short bytesRead = apdu.setIncomingAndReceive();
    short dataOffset = apdu.getOffsetCdata();
    // store first chunk in our intermediate byte array <-- how do i get rid of the intermediate array
    Util.arrayCopyNonAtomic(buf, dataOffset, inBuffer, (short) 0, bytesRead);
    // what is the overall length?
    short overallLength = apdu.getIncomingLength();
    short messageOffset = bytesRead;
    if (bytesRead != overallLength){ // otherwise we're finished, all bytes received
         short received = 0;
         do{
                   received = apdu.receiveBytes((short)0);
                   Util.arrayCopyNonAtomic(buf, (short)0, inBuffer, messageOffset, received);
                   messageOffset  += received;
              } while(received != 0);
    * REST OF CODE IN PROCESS METHOD
    I have also tried replacing the above code with the following
    short bytesLeft = (short) (buffer[ISO7816.OFFSET_LC] & 0x00FF);
    if (bytesLeft < (short)55) ISOException.throwIt( ISO7816.SW_WRONG_LENGTH );
    short readCount = apdu.setIncomingAndReceive();
    while ( bytesLeft > 0){
      // process bytes in buffer[5] to buffer[readCount+4];
      bytesLeft -= readCount;
      readCount = apdu.receiveBytes ( ISO7816.OFFSET_CDATA );
    as shown in the javadocs API, but it does not compile.
    This is my command APDU:
    /send 800100000003E8000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000003E8
    As you can see:
    CLA - 80
    INS - 01
    P1 & P2 - 00
    LC - 0003E8
    Data - 1000 0s
    LE - 03E8
    I am using JavaCard 3.0 with JCOP in Eclipse. How can I read the extended length apdu to the same buffer? I have no problem in returning an extended length response APDU. Thanks a lot for the help.

    You should not call the convenience method setIncomingAndReceive() in your first code. Please find out about the different APDU states. Furthermore, your Applet should implement the ExtendedLength tagging interface.

  • Hi I would be grateful if someone can help me, I have just bought a canon wireless printer, I only have an iPad so I can not install the cd that comes with the new printer yet it says it is compatible. How do I get it working I have a pay as you go 3G sim

    I do not use the Internet using wifi I use 3G mobile broadband and if I do need wifi it tells me I have to pay for it, but I can not work out how to install or connect my iPad with my new printer if there is not a cd slot or USB port. I only have an iPad no computer so how on earth do I use my printer with it if it I can't install the printer cd. I though I would be able to use Bluetooth and it would pick it up automatically but I am really confused now and don't know what to do please help.

    The iPad uses AirPrint technology to print to a printer. Check this Apple support page to see if your printer is listed as being AirPrint compatible.
    http://support.apple.com/kb/ht4356
    If your printer works with AirPrint you will need a Wi-Fi network in order to connect. That Wi-Fi network does not need to be connected to the Internet. As James Ward4 says, you'll need a Wi-Fi router to set up your network. Most routers require that a computer be used during the setup process. Perhaps you could use someone's computer to do the setup if you do not had one yourself. Once the router is set up you should be able to print.

  • How to Configure CATS Profiles in order for the Hours to be posted to CO

    Hi All,
    I have quick question for you all, how do I configure the CATS Time Entry Profiles so as to enable me to post the Hours (Different Receiving Cost Centers & Receiving Internal Orders) to CO.
    Currently I enter time using TCODE: CAT2 and a CATS Profile and Save the Timesheet.
    Following which I Approve Times using CAT4.
    Then when I try to transfer time to both HR and CO using TCODE: CATA time gets transferred to HR Time Management Infotypes but not to CO.
    I tried a couple of other TCODES as well i.e: CAT7 & CAPS and tried posting to CO but I am getting a message saying that "NO DATA TO TRANSFER" despite there been ample data fit to be transferred to CO.
    So, my question to you all is how do you handle this situation in your implementation/organization.
    Looking forward to hear from you soon.
    Regards,
    Aslam

    Hi Aslam,
    Im not sure why this isnt working.
    Try approving timesheets using CATS_APPR_LITE
    And check whether the timesheets are approved.
    Once that is done.
    Run CAT7
    This would post the data from CATS to controlling.
    Regards,
    Brinda

  • How to configure Goto context menu function on the web?

    We are running a web template on IE browser.  After the report run successfully, left click on any key figure column, we can see Goto context menu, from here, we can go to detailed report (e.g. from the current Cube level to more detailed ODS level).  However we find this jump from cube level to ODS level (Goto context manu) works on our QA system other than DEV system.  
    These stuff were configured by SAP consultants who left our company one year ago, if anyone knows how to make the Goto context menu works by drilling down from cube level to ODS level, please let us know and we are really appreciated!

    dear Bhanu,
    We figured out the problem, it is because we click Goto then select "Display Documents" which yields a 400 error, then go back to click Goto, pick up the target link we want and it yield the error.  After we hit F5 to reload the URL link, then directly select Goto our target, then it works fine!
    But one more question, under Goto context menu, we find four menu context items:
    1. Display Documents
    2. Documents for Navigation Status
    3. Our application target1
    4. Our application target2
    Select option 1 yields an error like mentioned above.
    Select option 2 pops up a new window with Key Figure selection box and a button called "Additional Functions", but seems go nowhere.
    Option 3 is setup in our system by using RSBBS like you suggested.
    Option 4 is not in RSBBS.
    Then our questions are for option 1, 2, and 4.  What are the functionalities of option 1 and 2, are these two standard web functionalities of BW web reports? and these two options always show up on the web no matter whether they work or not, right?  We are confused with option 4, it's not listed in RSBBS, then how come it show up?

  • How to configure Alpha Numeric No range for the Material Type

    Dear Expert,
    i kindly request for expert help on alpha numeric no range for the Material Type.
    business is looking for material no like 910442208571D. at present we have no range like 9000000000000 to 9999999999999
    how i can configure in the system??
    pl. help me on this
    Thanks a lot
    H shah

    Hi,
    System will not bring alphanumeric number of materials automatically during MM01.
    Check use exit MGA00002 - Material Master (Industry): Number Assignment.
    Also check 2 Function Modules:
    EXIT_SAPLMG02_001 - Customer Exit: Internal Material Number Assignment
    EXIT_SAPLMG02_002 - Customer Exit: External Material Number Assignment.
    Regards,
    Biju K

  • How does a method extend another method in the same class ??

    hi everybody, I want to know if it is possible to have such code as:
    void foo(){
    // foo process
    void bar <<extend>> foo{
    //foo process
    //bar process
    thanks for helping me

    Since you want different names for each of your so-called "child" methods, then neither overloading nor overriding in a subclass will work as each relies on the same method names. Perhaps the following will suffice:
    public class MyClass
       //some stuff
       private myMethodThatDoesSomeStuff()
          //do some stuff that all the other methods must also do
       private methodA(int q, byte z)
          myMethodThatDoesSomeStuff();
          // continue with this method.
       private methodL(short v, float g23)
          myMethodThatDoesSomeStuff();
          // continue with this method.
    }If not, you need to do some design work.

  • How to configure oem 2.1.0 on the client machine to detect nodes on the server

    I've oracle 8.0.5 running on a solaris 2.6 server. I also have oem 2.1.0 running on my NT workstation. But oem won't automatically detect nodes on the server. IA is running on the server and the client very well
    What do you guys think

    Hi
    Do you have an entry for the server db in your tnsnames.ora file
    (client machine)where OEM is running? If not, add an entry and
    try discovering again
    sarath

  • How to configure a second apache instance on the same machine?

    Hello,
    We are in the process of migrating our client server application to web. We are using 9iAS (release 1), forms and reports 6i.
    We installed 9iAS (Rel. 1) on Solaris platform. This instillation is our development platform. We need to create a second instance on the same Solaris box. What steps are to be taken to create this new instance on the same box?
    Any pointers or documentation are appreciated.
    Thanks in advance.
    Arun.

    You can create a 2nd service and copy all config files involved and change the contents of the files. E.g. create httpd_2.conf etc. etc. You will find that this is an endless process.
    What I usually do is create another Oracle 9iAS home (iSuites only). The installer automatically assigns a new port number and creates new config files.
    You do not have to install a 2nd Developer home. Instead, create a second environment file, e.g. (paths are clearly for Windows in my example):
    <ORACLE_Dev6i_HOME>\Forms60\Server\Apptest2.env
    Edit <ORACLE_9iAS_HOME>\Apache\Jserv\Servlets\zone.properties and add the following lines:
    servlet.oracle.forms.servlet.ListenerServlet.initArgs=EnvFile=D:\Oracle\Dev6i\forms60\server\default.env
    servlet.servletApptest2.code=oracle.forms.servlet.ListenerServlet
    servlet.servletApptest2.initArgs=EnvFile=D:\Oracle\Dev6i\forms60\server\Apptest2.env
    The alias �servletApptest2� is used in the serverURL parameter in the startup html file.
    Do something similar for Reports server. Create a 2nd Reports service and add this services to tnsnames.ora with a different port, e.g.
    RepserverTST2,RepserverTST2.world=(ADDRESS=(PROTOCOL=tcp)(HOST=myhost)(PORT=1951))

Maybe you are looking for

  • File to IDOCs

    Experts, I'm at the design phase of a scenario in which ORDER data (each order has multiple lines) should be submitted to ECC via idocs. each order should be submitted in different idoc. i have single input file which contains data (rows) for all ORD

  • Why firefox in my desktop can't open a new tab in the same windows?

    I can't open a new tab by clicking the + symbol. I don't know why this happen. If I want to open a new tab, I have to take a right click and then choosing open new tab. I think this is so terrible, I can't access the page on the same windows.

  • Bad pointer exception in Debug mode.. CView in CDockable pane MFC Feature pack

    Hi I have attached a CView in  CDockablePane and it works fine in Release mode but it throws bad memory pointer in debug mode while closing the application.(Crashing during close). Please advise... Find the code below how I had attached the View to D

  • Displaying small photos in Slideshow

    I have a number of very small (320x200 pixels) photos from my cell phone. When I run a slideshow of them, instead of displaying them at "actual pixels", LR fills the screen with them, which is effectively a 3:1 increase in size. Obviously, they look

  • File compare won't launch on mac

    mtn lion tried two diff file compare utilities both open fine when launched directly neither actually open a file compare when trying from within the dreamweaver interface. e.g., select a file and try a compare with remote. or resolve when syncing. j