How to configure N82 "features"?

hallo
at first i'am sorry for my english....
i have a few questions about N82 and it functionality
1.
the worst thing in this device - media (gallery) keys. First - the thin key between Cancel and Delete keys. Second - on the right side, near the Camera key.
Tell please, is there a way to change it functionality? I almost dont use gallery at all, and i not need two keys to access it. It be better for me set them to.... for example, first key to quickly switch language, second - to rotate screen and, when camera is activated, switch camera/video modes
2.
there is standby mode on desktop. Its include six icons in horizontal line on top of desktop, i can configure them; and 7 lines (as max), shortcuts in the center of desktop. By default its Search app, Calendar events and Wi-Fi shortcut. How can i configure them? I not need Search and WiFi quick launch, but i would like to see some shortcuts to active apps, selected by me, on my desktop. And its be more useful to see shortcuts to unread sms and missed calls etc...
3.
How can i quickly access to my desktop? I found only one way - red Reject key, but this key close active app, and i didnt like it. Another way is the press Menu key twice - its terrible
4.
Next feature is in the Contacts. If some of additional fields has more then one line, or text is too long, there is no way to see this note, except to start to edit this contact and scroll to needed note.
thanks

ok, thanks, i understand
4. i told about to look at the note, not edit
exapmle:
name: John
phone: 02
street: Crazy Revolution st, house 34, appt. 88
save it
now try to fing out an address. Open contact, you see name, phone ok. But if you want to see a flat number, you must switch to edit mode, becouse of you see only "Crazy Revolution s..." and nothing more. That is realy bad. This is concern to any other field - name, phone, email etc. And what is worse, you cannot cancel editing and cancel changes. You can you save changes and revert info before editing. Realy bad design and user interface.
btw, i havnt Outlook on my home PC, i dont need this monster
and PC Suite dont allow me to edit contacts.....

Similar Messages

How to configure the feature of WIM Co-browsing

How to configure the feature of WIM Co-browsing. Does it requrire anyother Hardware or Software other than the Cisco CIM.
Thanks in advance
Rohit

Thanks lohjintiam for replying. I am not sure it is discontinued but on CIM demo they still shows that co-browse is one of the available feature.
Thanks
Rohit

How to configure hotline feature in CUCM 8.5?

The hotline is like emergency phone with no keypad, and shall be connected to an identical phone automatically when it's placed in an off-hook condition?
seems very easy but i donot know where to configure this.
Thanks!

Hotline is a little different from PLAR -
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_0_2/ccmfeat/fsgd-802-cm/fshotline.html
hotline was introduced in 8.0 and is different from plar in that:
The hotline feature adds the additional restriction that hotline devices that receive calls will only receive calls from other hotline devices, and will reject non-hotline callers.
Hotline != Hotdial

How to configure link between 2921 and SM-D-ES3G-48-P EtherSwitch Service Module

hi,
I can't do that like the procedure given by Cisco.
http://www.cisco.com/en/US/partner/docs/routers/access/interfaces/software/feature/guide/eesm_sw.html#wp1942894
Cisco Procedure :
interface gi10/0
ip address x.x.x.x x.x.x.x
service-module gigabitethernet 1/0 session
My result :
R2921-8CPITR-1(config)#int gi 1/1
R2921-8CPITR-1(config-if)#ip address 2.2.2.2 255.255.255.192
% IP addresses may not be configured on L2 links.
R2921-8CPITR-1(config-if)
R2921-8CPITR-1(config)#interface gigabitEthernet 1/1.1 ?
% Unrecognized command
R2921-8CPITR-1(config)#interface gigabitEthernet 1/1 ?
<cr>
R2921-8CPITR-1(config)#
the session is not possible also ?
R2921-8CPITR-1#service-module gigabitEthernet 1/1 sess
                                                  ^
% Invalid input detected at '^' marker.
R2921-8CPITR-1#
The routeur said that it's not a L3 port, so how to configure it to allow communication between the 2921 and the card ?
Is there a bug with that version I'm in 15.1(4)M4 ????
R2921-8CPITR-1#sh ver
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 20-Mar-12 18:57 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)
R2921-8CPITR-1 uptime is 19 hours, 21 minutes
System returned to ROM by power-on
System restarted at 16:00:45 GAB Fri Sep 14 2012
System image file is "flash0:c2900-universalk9-mz.SPA.151-4.M4.bin"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco CISCO2921/K9 (revision 1.0) with 479232K/45056K bytes of memory.
Processor board ID FGL1618119E
6 Gigabit Ethernet interfaces
2 terminal lines
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
Device#   PID                   SN
*0        CISCO2921/K9          FGL1618119E
Technology Package License Information for Module:'c2900'
Technology    Technology-package           Technology-package
              Current       Type           Next reboot
ipbase        ipbasek9      Permanent      ipbasek9
security      None          None           None
uc            None          None           None
data          None          None           None
Configuration register is 0x2102
R2921-8CPITR-1#

Same issue here.
I just waited a few minutes and the interface went down and back up, this time it was a L3 interface.
My guess is that it was booting the switch module IOS, and it detected it until it was fully booted:
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to down
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to down
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet1/0, changed state to up
Apr 11 05:26:52.795: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to up
Apr 11 05:27:46.895: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, changed state to administratively down
Apr 11 05:27:46.895: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to administratively down
Apr 11 05:27:46.947: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down
Apr 11 05:27:47.031: %LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to administratively down
Apr 11 05:27:47.083: %LINK-5-CHANGED: Interface GigabitEthernet1/0, changed state to administratively down
Apr 11 05:27:47.895: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-Service-Engine0/0, changed state to down
Apr 11 05:27:48.083: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to down
Apr 11 05:27:49.283: %IP-5-WEBINST_KILL: Terminating DNS process
Apr 11 05:27:52.499: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to up
Apr 11 05:27:53.087: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.1(4)M5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 04-Sep-12 16:50 by prod_rel_team
Apr 11 05:27:53.255: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start
Apr 11 05:27:53.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to up
Apr 11 05:28:21.435: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up
Apr 11 05:29:22.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to down
Apr 11 05:29:22.095: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
Router>en
Router#sh ip int brief
Interface IP-Address OK? Method Status Protocol
Embedded-Service-Engine0/0 unassigned YES unset administratively down down
GigabitEthernet0/0 unassigned YES unset administratively down down
GigabitEthernet0/1 unassigned YES unset administratively down down
GigabitEthernet0/2 unassigned YES unset administratively down down
GigabitEthernet1/0 unassigned YES unset administratively down down
GigabitEthernet1/1 unassigned YES unset up down
Vlan1 unassigned YES unset down down
Router#
Apr 11 05:29:46.106: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to upconf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int g1/0
Router(config-if)#ip add 1.1.1.1 255.255.255.0
Router(config-if)#no shut
Router(config-if)#
Apr 11 05:30:09.046: %LINK-3-UPDOWN: Interface GigabitEthernet1/0, changed state to up
Apr 11 05:30:10.046: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to up
Router(config-if)#end

How to configure Pay Roll in SAP

Dear Gurus,
How to configure Pay Roll in SAP. Pls suggest.
Regards
Pankaj
Please have a look at the forum search

Define Employee Sub Group Grouping for PCR and CAP / Check Payscale Area / Check Payscale Type / Check Assignment of Pay Scale Structure to Enterprise Structure / TARIF Feature / Create Control Record / Revise Payscale groups and levels / Create Wage type catalog / Employee Subgroup Grouping for primary wage types / Personnel Subarea Grouping for Primary Wage Type / Setup Payroll Period for Collective Agreement Provision / Check wage type group Basic pay / Define wage type permissibility for each PS and ESG / Check wage type characteristics / Maintain Valuation of Base Wage types /
Check Wage Type Group Recurring Payments and Deductions / Check Wage Type Group Additional Payments /Check Wage Type Group Membership Fees / Membership Payee /Determine allowed payees per membership type /Define Membership / Deduction Types /Define Trust Details for Provident Fund /Maintain Contribution Details for Provident Fund ( Feature 40EPF )
Assign Company Rates for Provident Fund / Define PF Trust Validity Period / Define Contribution type for Statutory rates for Provident Fund /Maintain ESI Eligibility Limit / Define Personnel Area and Subarea Groupings for ESI /Assign ESI Groupings for Personnel Area and Subarea/
Maintain Contribution Rates for ESI/
Maintain Gratuity Trust ID/
Maintain Gratuity Contribution Frequency and related wage types/
Define Contribution Rates for Gratuity/
Maintain Superannuation Trust ID/
Maintain Superannuation Contrib. Freq and Rel. Wage Types/
Define Contribution Rates for Superannuation/
Maintain Loan Types/
Create Loan Conditions/
Maintain Loans Grouping (Feature 40LGR)/
Maintain Salary Components ( Feature 40LSL)/
Max. no. loans allowed (LML1)( Maximum number of loans allowed at a time)/
Max. no. loans allowed (LML2)(Maximum no of loans allowed)/
Maintain Maximum amount for loans outstanding(LMVAL)/
Maintain Loans Eligibility Checks and Limits/
Maintain Accommodation Types/
Maintain the processing options for CLA/
Define Conveyance Types/
Assign eligibility criteria for conveyance allowance/
Define Professional Tax Grouping Details/
Assign Professional Tax Groupings for Personnel Areas and Subareas/
Assign Amounts for Professional Tax Deduction/
Maintain Method and Form Layout for Professional Tax Groupings/
Define Personnel Area and Subarea Groupings for Tax/
Assign Tax Groupings for Personnel Areas and Subareas/
Define Tax Codes/
Assign Tax Code Limits to Wage Types/
Assign wagetype to wagetype group offcycle /
Set Up Off-Cycle Reasons/
Specify default values for wage types Off Cycle/
Specify Default Values for Payment Methods/
Configure wage types for Section 80/
Configure wage types for Section 88/
Define other allowance or re-imbursement type for exemption/
Define priority for deductions/
Maintain recovery of arrears/
Define cumulation types for wage types/
Assign universal contribution groupings for universal contribution types /
Assign state for universal contribution grouping/
Assign slab code and other parameters for each state of univ.type./
Assign Contribution value for each slab./
Define Period Parameters/
Define Date Modifiers/
Check Payroll Accounting Area/
Generate Payroll Periods/
Generate calendar for cummulation/
Assign Basic Wage Types to Grouping for Allowances/
Define Pay scale groupings for Allowance/
Assign Pay Scale Groupings for Allowances/
Assign wage type model for Pay scale grouping for Allowances/
Calculate Eligibility for Raps/ . ....................................................................................................................................................................................................................................................................
If you get the knowledge then please . mark the questions as answered

How to configure N9 for push e-mail?

Does anybody know how to configure N9 for push e-mail? It should be possible because push email is part of Nokia's N9 official specs but I'm unable to find any reference in the manual or online.

I know that I am late to the party but just got my N9. The push email works fine for my Exchange & my Gmail but for my mail.com account (which I believe is really AOL) it only syncs when I manually tell it to. I have it set to "always up to date" ... does anyone have any ideas?
Thanks!
Update: just fixed it myself but in case it helps anyone I turned on the Push Notifications & that did the trick. Which is kind of odd bc I notifications from my Gmail & MS Exchange automatically did it but I guess that feature has to be turned on for this email.
Wish all the features on the N9 had the "I" icon which you could press for more info as I thought that option would just let you know when your email was syncing (like the little arrow on the top right). Oh well - now if I can just get my contacts/calendar off of my PC's OutLook & onto my N9 ...................
Cheers!

How to configure mail option in newly added discussion forum portlet.

Hi,
i added a discusion forum portlet in Oracle App Server portal. here all the features are working except mail notification facility.
Please suggest me, how to configure that?
Dhananjay

If you cannot see the device then it is not attached or mapped by multipath.
Are you using the same kernel on both servers?

How to configure mail service in DRM 11.1.2.3.500

How to configure mail service in DRM 11.1.2.3.500.
There is a feature in Workflow Models to Notify users by sending mail.
Can anyone help me find from where to configure mail service.

Hi,
If you open up the Configuration Console on the DRM Server you should be able to navigate to the second tab called "Host Machines".
From there, select SMTP Server - and enter the details for your SMTP server. You've now configured DRM to send emails... now you just need to add it into your workflows...

How to configure N+1 HA

Hi,, everyone...
My messaging server version is as follow...
root@idm02/users/leeky/mail6.3/sbin>./imsimta version
Sun Java(tm) System Messaging Server 6.3-8.01 (built Dec 16 2008; 32bit)
libimta.so 6.3-8.01 (built 17:17:19, Dec 16 2008; 32bit)
SunOS idm02 5.10 Generic_120011-14 sun4u sparc SUNW,Sun-Fire-280R
Question is how to configure N+1 HA with Messaging Server 6.3.
I am using Veritas Cluster S/W and I already configured my message servers N+1 with iMS5.2p2 and one Asymmetric HA configuration with Messaging Server 6.3.
No problem with iMS5.2p2(N+1 configuration) and Asymmetric HA configuration(6.3).
In near future,however, I will upgrade all of my Messaging Servers to 6.3 with N+1 HA configuration.
With iMS5.2p2, I had no problem to configure N+1.
But I do not know how to configuire N+1 with 6.3 because 6.3 can be installed only one instance in one machine.
-- iMS5.2p2 N+1 configuration --
A node: have mount point + shared disk
B node: have mount point + shared disk
HA node: have only A and B mount point
all binary,config and user data are stored in shared disk.
When A node and(or) B node are failed, Veritas cluster stops all service(=unmounts shared disk ) and mounts to HA node.
It was possible way because iMS5.2p2 supports multi instance environment.
I read under books, but I could not found relevant information
http://docs.sun.com/app/docs/doc/819-4428/gedso?a=view <-- very unkind explanation
http://www.sun.com/bigadmin/features/hub_articles/message_srvr_cluster.pdf <-- only describe Asymmetric
According to those books, binaries can be installed on a local disk in each A,B and HAnode and then run useconfig in HA node.
Config and user data is stored in a shared disk.
With this way, I can bulid up between A and HA node(it's find because it's the same as Asymmetric configuration method )
But between B and HA node, what should I do ?
What kind of way should I use to install or configure B and HA node ? I can not install 6.3 in HA node and link files under {ServerRoot}
I tried many ways, but I failed and failed.
Any Good idea, advice or document ?
Thanks
Edited by: leeky41 on Nov 4, 2009 1:48 AM

leeky41 wrote:
Question is how to configure N+1 HA with Messaging Server 6.3.The JES installer (used with Communication Suite 5) doesn't allow for this configuration.
I am using Veritas Cluster S/W and I already configured my message servers N+1 with iMS5.2p2 and one Asymmetric HA configuration with Messaging Server 6.3.
No problem with iMS5.2p2(N+1 configuration) and Asymmetric HA configuration(6.3).
In near future,however, I will upgrade all of my Messaging Servers to 6.3 with N+1 HA configuration.
With iMS5.2p2, I had no problem to configure N+1.
But I do not know how to configuire N+1 with 6.3 because 6.3 can be installed only one instance in one machine.The new communication suite installer (provided with MS6.3 64bit/MS7 and above) allows you to install multiple copies of Messaging Server via the use of the altroot mechanism.
http://docs.sun.com/app/docs/doc/820-2124/6ndofheo2?a=view
"Performing Multiple Installations with an Alternate Root"
According to those books, binaries can be installed on a local disk in each A,B and HAnode and then run useconfig in HA node.
Config and user data is stored in a shared disk.Using the altroot mechanism, binaries can be installed (and patched) on a shared disk. When you patch you use the "-R <altroot> path" e.g. patchadd -R /opt/comms/inst1/ 123456-78
Any Good idea, advice or document ?I recommend you move to MS7u3 (Communication Suite 7) and use the altroot functionality.
Regards,
Shane.

I would appreciate your help on how to configure a gmail in a way it ask for the password everytime I connect?. In the only way I can configure it I have to include the pw when configuring the account and after that it do not ask for pw

I would appreciate your help on how to configure a gmail in a way it ask for the password everytime I connect?. In the only way I can configure it I have to include the pw when configuring the account and after that it do not ask for pw so everyone that shares my iPad can oppen my mail with no pw required.
Thank

The iPad is designed to be a single user device, and there is currently no way to password protect the Mail app - even removing the account password from Settings > Mail, Contacts, Calendars will just prevent new mail being downloaded, it won't hide those that have already been downloaded. There is this work-around for the app : https://discussions.apple.com/message/13127632#13127632 . Also there might be third-party email apps that feature password protecting.

How to configure the wifi access with specific time slot for kids?

how to configure the wifi access with specific time slot for kids?

Which model of AirPort base station do you have? Which version of OS X is your MacBook Pro running?
Wi-Fi access can be limited using the Timed Access feature of the AirPort routers. You would do so using the AirPort Utility.

How to configure initial-context-factory and provider_url on Websphere MQ

I have a few questions about WebSphere MQ. Currently, my application is able work well with other JMS provider. But I would like to move to use WebSphere instead.
Can anyone suggest me how to configure the application connecting WebSphere?
�     I�m using the Initial java naming factory as bellows: com.sun.jndi.fscontext.RefFSContextFactoryIs it the correct class?
�     About the java-naming-factory-url, How do I know what object that I should use? I found this example in JMSAdmin.config � iiop://localhost:7555� What�s iiop ?
�     What jar file that I should add in my classpath?

Hi,
You have a few options...
1. Use WebSphere Application Server as the JNDI provider
2. Don't use JNDI
3. Use the File System Context as the JNDI provider
Exploring these options in a bit more detail...
1. Use WebSphere Application Server as the JNDI provider
Assuming you have WAS, the best way of obtaining your queue is to define the Queue and Queue Connection Factory objects in WAS using the admin console, then obtain them from the Initial Context as per the following article
http://publib.boulder.ibm.com/infocenter/wasinfo/v6r0/index.jsp?topic=/com.ibm.websphere.express.doc/info/exp/ae/rnam_example_prop2.html
If you prefer not to do JNDI lookups in your code a great alternative is to use Spring (www.springframework.org). If you haven't come across spring before it's well worth a look. One of it's many features is a bean factory for creating your objects. There is lots of support for retrieving JMS objects from JNDI, so in the main all you have to do is write some XML similar to the following...
<bean id="jndiTemplate" class="org.springframework.jndi.JndiTemplate">
       <property name="environment">
              <props>
                     <prop key="java.naming.factory.initial">${jndi.initialContextFactory}</prop>
                     <prop key="java.naming.provider.url">${jndi.providerUrl}</prop>
              </props>
       </property>
</bean>
<bean id="queueConnectionFactory" class="org.springframework.jndi.JndiObjectFactoryBean">
       <property name="jndiTemplate" ref="jndiTemplate"/>
       <property name="jndiName" value="${jndi.queueConnectionFactory}"/>
</bean>
<bean id="queueName" class="org.springframework.jndi.JndiObjectFactoryBean">
       <property name="jndiTemplate" ref="jndiTemplate"/>
       <property name="jndiName" value="${jndi.queueName}"/>
</bean>There's a bit more to it than this, but not much. I've been meaning to write a tutorial on this for a while so if you're interested let me know.
2. Don't use JNDI
This approach involves using the creating the native MQ Queue Connection Factory and Queue classes. You can hard code this, but it's much better to abstract it from your application. Again you can use Spring. The definition would look something like the following...
<bean id="MQJMS_TP_CLIENT_MQ_TCPIP"
class="org.springframework.beans.factory.config.FieldRetrievingFactoryBean">
       <property name="staticField">
              <value>com.ibm.mq.jms.JMSC.MQJMS_TP_CLIENT_MQ_TCPIP</value>
       </property>
</bean>
<bean id="queueConnectionFactory" class="com.ibm.mq.jms.MQQueueConnectionFactory">
       <property name="transportType" ref="MQJMS_TP_CLIENT_MQ_TCPIP" />
       <property name="queueManager" value="${mq.queueManager}" />
       <property name="hostName" value="${mq.host}" />
       <property name="port" value="${mq.port}" />
       <property name="channel" value="${mq.channel}" />
</bean>
<bean id="publishInvoiceQ" class="com.ibm.mq.jms.MQQueue">
       <constructor-arg value="${mq.queueName}" />
</bean>
3. Use the File System Context
The file system context is just like a JNDI context, but instead of using a url like iiop://host:port you have to specify a file system url. Because FSContext is just another JNDI context you can still use the spring configuration from option 1, but just change the relevant parameters.
In order to define you queues and queue connection factory using the File System Context, you need to download a swing application called JMS Admin. Get it here
http://www-1.ibm.com/support/docview.wss?rs=171&uid=swg24004691&loc=en_US&cs=utf-8&lang=en
With regards your specific questions...
IIOP is just another communication protocol. If you want more details I'm sure typing "what is iiop" into google will provide plenty of hits.
I'll do my best to answer the remain two tomorrow - I wrote an application a few months ago which used the File System Context, but don't have the details to hand.

How to configure Share Button in Mountain Lion?

I have just updated my MBP to Mountain Lion. Going to give Safari a bash as I liked the look of some of the new features, for one the Share Button.
However, when I try to share something by email it opens Chrome and shares it using a Gmail account I use for work stuff that I don't remember specifying on any of my Apple devices so have no idea why it has defaulted to using this one. I use an @me.com account for the mac mail client and want to share emails using this.
Any ideas how can configure the new Share Button on Mountain Lion to do this would be appreciated.
Thanks,
Chris

Hi you all,
I´ve been trying to acomplish the opposite without success. I just updated from snow leopard to mountain lion. I only use web based gmail since I find it more usefull. I used to have a small program called gmail notification on SL that among other things poped out a small safari page to send an email every time I choosed to email something from the options on an item. In other words it used web based gmail to send attachments. eg. I would select a word document, hit sec button, select send email... and a safari web page with my attachment on it apeared that would let me include address and text to it.
Gmail notification does not work on ML. I tried to download it without success. I´d love to have web based gmail open ready to write the email when I hit share button on ML but apple Mail app shows up every time I do this. If I select chrome as my email reader from options in Mail then chome would pop up but only on the default starting page.
Any ideas?
Thanks

How to configure DNS on RED HAT 5,4

Hello Linux experts
I'm need to configure dns service for Oracle RAC 11gR2
For dns server, I'm using the hosts for RAC.
How to configure DNS on RED HAT 5.4 ?
Anyone have a manual for do this ?
Best Regardss

Regardless of whether your will find tools or perl scripts like h2n, or manage your configuration files directly, you will need to get yourself familiar with basic DNS concepts and terms. A DNS cluster is a number of nameservers that share DNS records. You may perhaps rather want to setup a DNS server system consisting of a master and slave DNS server for your authoritative zone (domain name) on each node, but also configure for DNS forwarding and perhaps caching to public DNS servers on the internet. You may want to configure primary and secondary DNS records on your client sides in /etc/resolve.conf, perhaps also using some round-robin or timeout options.
I'm afraid Google will be your best friend. You may find below links helpful in your approach:
http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO_%3A_Ch18_%3A_Configuring_DNS
http://tldp.org/LDP/lame/LAME/linux-admin-made-easy/domain-name-server.html
http://www.redhat.com/magazine/025nov06/features/dns/
http://www.chinalinuxpub.com/doc/www.siliconvalleyccie.com/linux-hn/dns-static.htm

How to configure Beehive after successful installed in Oracle 10gR2

I have successfully installed Beehive in Oracle 10gR2 with RHEL4, how to configure the email, calendar, content, rtc and other OCS services available in Beehive?

How to configure the actual services can be found in: http://download.oracle.com/docs/cd/E10534_01/bh.100/e10477/toc.htm
How to configure end user clients to connect to Beehive can be found in: http://download.oracle.com/docs/cd/E10534_01/bh.100/e12034/toc.htm
You might also want to take a look at the Concepts Guide (http://download.oracle.com/docs/cd/E10534_01/bh.100/e05393/toc.htm) to read about the new architecture and features in Beehive.

How to configure N82 "features"?

Similar Messages

Maybe you are looking for