How to configure netboot across vlans/DHCP when already a windows bootp server in the mix?

Hi All,
We just moved to multiple VLAN's for our Mac's in a mostly WIndows environment. DHCP option 66 points to a Windows Deployment Server & option 67 to the WDS file.
I've tried  "sudo bless –netboot –server bsdp://10.2.0.1" on a client but get "Netboot scheme bspd not supported on EFI systems".
I can get changes to the DHCP scopes if needed  -except for the boot server, so I was thinking using something like using DHCP Vendor Class Identifier to specify a different bootp server but have no clues how...
Any ideas?
Cheers
Steve

You might check out the "How to boot across subnets" page at <http://afp548.com/mactips/>. It has a bunch of info.

Similar Messages

  • How to configure IPS 4240 - K9 to send log file to syslog server

    I am looking for the commands in how to configure IPS 4240-k9 to send log file to SYSLOG server. If anybody has or came across similer issue please advice.
    Thanks in advanced.

    Ali -
    I am sorry to tell you, but the Cisco IPS Sensors do not send Syslog messages. Your only options for sending signature event information are:
    SDEE (an TLS Encrypted XML formatted message) the sensor is the SDEE Host and your event receiver (MARS, IME, Intelitactics, etc) is the client.
    SNMP Traps - You need to set the "Action" on each signature you want the sensor to send a trap.
    - Bob

  • How to configure IIS webserver with weblogic so that I can invoke servlets without the .wlforward extension

    How to configure IIS webserver with weblogic so that I can
    invoke servlets without the .wlforward extension
    As per the documentation iisforward.dll is registered as a filter and .wlforward
    has also been
    included as a special file type. However this requires me to key-in ".wlforward"
    after my servlet name.
    What I want is something like this
    http://iis/MyServlet
    Please help me find a solution to this
    Thanks,
    Rishi

    I am able to invoke the servlet without the wlforward extension now.
    However, now I am required to add /weblogic before the servlet
    name otherwise it does not execute the pathtrim property.
    I have tried with the pathprepend thing also.
    Can we get rid of the /weblogic part also. I just want to execute
    my servlet as http://iis/myServlet.
    Your help in this regard is greatly appreciated...
    Thanks..
    "Rishi" <[email protected]> wrote:
    >
    Thanks for the reply Kumar.
    I did follow the instructions as given in the Weblogic documentation
    The documentation said to add iisforward.dll as a filter service
    and register .wlforward as a special
    file type to be handled by iisproxy.dll. For this,
    while configuring the IIS server in the Home Directory tab
    I added an extension ".wlforward" and the executable as
    iisproxy.dll. Is this the way it should have been done...
    I also modified the iisproxy.ini file as per the documentation.
    I have added the WLForwardPath property and set it to /weblogic.
    My server works fine when I give the url as
    http://iis/myServlet.wlforward
    but it does not work for
    http://iis/myServlet and this is the way i'd want it to work.
    Please tell me if I am missing something on the configuration part
    and if there is something special that needs to be done. I shall
    be grateful to you.
    Kumar Allamraju <[email protected]> wrote:
    http://e-docs.bea.com/wls/docs61/adminguide/isapi.html#101184
    Rishi wrote:
    How to configure IIS webserver with weblogic so that I can
    invoke servlets without the .wlforward extension
    As per the documentation iisforward.dll is registered as a filter
    and
    .wlforward
    has also been
    included as a special file type. However this requires me to key-in".wlforward"
    after my servlet name.
    What I want is something like this
    http://iis/MyServlet
    Please help me find a solution to this
    Thanks,
    Rishi

  • How can I create accurate decimal dimensions when creating a new document or using the art board in Illustrator CS6? When I type in a number with a decimal, it automatically rounds the number up.

    How can I create accurate decimal dimensions when creating a new document or using the art board in Illustrator CS6? When I type in a number with a decimal, it automatically rounds the number up.

    For my part you are welcome, sdowers.
    Unfortunately, the uncertainty arising from the rounding has been up several times here in this forum.
    I just came to remember a warning that needs to be given:
    The rounding of the representation of a numerical value may be harmless in itself, but if you use it for any operation that changes the value, such as multiplication or whatever, things will go wrong because the operation will be made on the basis of the rounded value instead of the true value. So, as in your first case in post #2, 39.625 rounded to 39.63 will become 79.26 instead of 79.25.

  • When I access a windows files server with the mac I am adding .apple (hidden files). How can I prevent this.

    When I access a windows files server with the mac I am adding .apple (hidden files). How can I prevent this?

    Look for a program called BlueHarvest. I'm not sure if it still works with Mountain Lion.
    I believe your file server can be set up to handle the metadata files, but I suppose that would depend on the Server software and your IT staff.

  • How do i finish a download that was already started and not finished because the library closed befo

    how do i finish a download that was already started and not finished because the library closed before it done

    What are you trying to download and how were you downloading it?

  • How to configure a pop up message when creating an appraisal?

    Hi All,
    I have a question.
    When the supervisor creates an appraisal for an employee, the supervisor is obligated to create Objectives for the employee but creating Competencies are only optional for executives (people group). When the supervisor has finished creating the appraisal and wants to review it, he will need to click on a Continue button.
    When the continue button is pressed, a warning pop up message will appear if the competencies created was null. As it is only a warning pop up message the supervisor can just click ok and continue to the review page.
    Now I am needed to configure this pop up message for the appraisal creation page and I would like to know how do I go about in searching for it? Should it be in the OAF java files or is the pop up message can be configured using personalization? I just want to know how to search for the configuration of this pop up message. Thank you
    regards,
    Ilham

    Hi Sheela,
    Though you made 'Dataline' field as mandatory, system will throw an error message and will put MOUSE CURSOR on that missing field. So ultimately user would come to know that a particular field is missing.
    And in SAP there would be lots of mandatory fields and it's really not feasible to put pop-up messages for such requirements and that too in transactions like CMR. 
    Tell user that system will automatically put MOUSE CURSOR on a particular mandatory field anytime anybody misses to maintain it. As a SAP consultant, your job is to convince the user with such standard functions.
    If at all you want to put pop-up message for it, then you need to go for User Exit development.
    Revert back if any further issue.
    Regards,
    Anup

  • HT4745 how to configure NetBoot in os 10.5.8

    I want to install Os version 10.6 and it asks that the server must first be configured for NetBoot before installing this software, can someone advise how to configure and what does it mean?

    Welcome to the Apple Support Communities
    Check if your iMac is supported > http://support.apple.com/kb/sp575 Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard Then, make a backup, insert the DVD and upgrade. Finally, open Apple menu > Software Update and update to the most recent version.
    See if your computer is supported > http://www.apple.com/osx/specs Open App Store and purchase Mountain Lion. Check if your programs are supported > http://www.roaringapps.com

  • How can configure scope options in dhcp server

    Good Night Partners.
    I need configure scope options in dhcp server on mac mini.
    i dont know how to do.
    its my first mac and i confuse.
    Can anybody help me please.

    Are you referring to DHCP Option Codes? If so then this can be done with the DHCP server included with Mac OS X Server. However Apple do not provide a tool for doing this nor for encoding the values in the required format.
    What you will need to do is edit the DHCP Server configuration file manually using a text editor. This configuration file is located at /etc/bootpd.plist before you do this I advise having a read of the Unix man page for bootpd (the DHCP server software Apple use).
    You can use a utility I have written to generate the required information and then paste this in to /etc/bootpd.plist it can be downloaded from -
    http://web.me.com/jelockwood/MyUtilities/dhcp.html

  • How to Configure Compact 7 as DHCP Server

    HI All,
    I have a Windows Embedded Compact 7 headless device.
    I want o run DHCP Server on this device to connect 10 clients to it over wired Ethernet.
    Later I need to communicate with all 10 clients periodically by using ip allocated by DHCP server.
    The DHCP clients we need to use will have only Dynamic IP configuration, no provision to set static IP. 
    So we need to make WEC7 device as DHCP Server.
    Is it really possible to use WEC7 device as DHCP server?
    If Yes, how can I Configure WEC7 as DHCP server? 
    If No, Please suggest any other alternatives to assign IP's to clients and start communicating with clients.
    Thanks in advance.
    rakesh

    Hi All,
    DHCP Allocator is working fine on WEC7.
    I am able to see the connected DHCP clients information in Registry under ConnectionSharing/Addresses.
    But for my application development I don't want to read the registry all the time to get updates of connected clients.
    Are there any other options (API) available to read connected clients info (IP, MAC, Client Name etc).
    And if i can register to some services for client connection status change notifications would be better.
    Do you suggest any appropriate ways?
    Thanks in Advance.
    rakesh

  • How to configure a Office 365 email on SAP BI 4.1SP05 server to send scheduled reports by email ?

    Hi All,
    I am trying to figure out how to configure office 365 server on BI platform so that I can send scheduled reports by Email.
    Below are the system details:
    SAP BI 4.1 SP05
    Microsoft Office 365 Email account
    I referred to the SCN post for configuring gmail.
    I could easily configure my gmail account.
    I tried same logic with Office 365. Instead of using port 465 (for gmail) I used port 995 (for office 365).
    That didnt work.
    I also tried using port 587 for TLS authentication but that doesnt work either.
    SMTP Link for office 365:  smtp.office365.com
    For simplicity purposes, I have opened all the ports on the firewall and server.
    Please let me know if I have missed anything or if my whole approach is incorrect ?
    I am open to suggestions and workarounds.
    Thanks,
    Prathmesh Pai

    Hi there,
    When the order is saved, the system will call the mail ID maintained in SU01 of the user.
    It will then trigger the mail to the regular outlook mailbox.
    Else in some cases a new Z table is defined to maintain the mail IDs. System will trigger the mail through outlook. It has that inbuilt capability.
    Just ask your user to check his mail box to see if he has received the mail.
    Regards,
    Sivanand

  • How do I fix -50 error message when syncing phoneon Windows 7?

    How do I fix -50 error message when syncing phone on Windows 7?

    Quit Mail. Back up all data.
    Triple-click the line of text below to select it, then copy to the Clipboard:
    /Library/Mail/Bundles
    In the Finder, select Go ▹ Go to Folder from the menu bar. Paste into the box that opens, then press return.
    A folder may open. If it does, move the following item in that folder to the Trash:
    UnsubMailPluginMailAppOSX.mailbundle
    You may be prompted for your password when you do this.
    Launch Mail.

  • How can I make it so that when Safari opens it takes me to the homepage?

    Say I am on youtube and I quit safari, when I reopen safari later, it goes to the page last open, in this case, youtube. How can I make it so that when Safari opens it always takes me to the homepage?

    Click on the red button (top left) to close the window before quitting.

  • How to use deafult pdf viewer ? when i give windows in my pc pdf file open in firefox deafultly but suddenly its not working how to fix this ?

    please tell me how to use default pdf reader in firefox ? when i give windows in my pc pdf file open in firefox deafultly but suddenly its not working how to fix this ? pdf not open when i give ok with preview in firefox its not open its offer again same message

    In order to change the default pdf reader please see: [[View PDF files in Firefox without downloading them]]
    In order to change the file association: [[Applications panel - Set how Firefox handles different types of files]]

  • Silly questions but new on apple, Q1 how do I cut and paste Q2 when I have a spelling error with the red line under it how do I correct it?

    Q1 How do I cut and paste
    Q2 how do I correct a spelling error when it has a red line under it?

    Lynnie2002 wrote:
    Q1 How do I cut and paste
    Highlight the item.
    Finder>Edit>Copy
    Place the item where you want to
    Finder>Edit>Paste
    There is 3rd party software that makes cut & paste easier with just 1 or 2 steps. 
    Q2 how do I correct a spelling error when it has a red line under it?
    You can find the correct spelling in the Apple dictionary.  Just add the correct spelling & delete the error.
    Care to share which OS you are using and which model iMac you have? 

Maybe you are looking for