How to configure network for Plex Media Server

How do I configure my router for accessing Plex Media Server running on my home PC?
The router ActionTec MI424-WR Rev F adds an entry in the port forwarding (port 32400), but I am unable to access the system.

Did you check the Plex documentation for ALL the ports you need to forward?
http://wiki.plexapp.com/index.php/Frequently_Asked_Questions#Where_do_I_find_the_documentation.3F
What network ports do I need to allow through my firewall to enable access?
TCP 32400 (for access to the Plex Media Server) [required]
UDP 1900 (for access to the Plex DLNA Server)
UDP 32469 (for access to the Plex DLNA Server)
UDP 5353 (for Bonjour/Avahi if you are using these products for service discovery) [recommended for iOS clients]

Similar Messages

How to configure solman for Workflow BW Server.

Dear Experts,
How to configure Solution Manager workfolw for BW sever. We have done for R/3 systen . it working fine.
Regards,
Anand Mehrotra.

Hi
might be this helps, this is the basic set up if you use bw server
[http://wiki.sdn.sap.com/wiki/display/Basis/BIReportingforSolutionManagerEWA_ConfigGuide|http://wiki.sdn.sap.com/wiki/display/Basis/BIReportingforSolutionManagerEWA_ConfigGuide]
jansi

How to configure SSL for Oracle Weblogic Server

Hi,
Please help me to configure SSL in oracle weblogic server.
If possible, please provide step by step to configure SSL.

this should help
http://weblogic-wonders.com/weblogic/2010/05/19/configuring-ssl-on-weblogic-server-custom-identity-custom-trust/

How to configure macbook for Linksys print server

I need to configure my Macbook for use with a linksys WPS54G wireless print server. I've been using it for months with my PC, but as I recall, the install CD basically said "contact Apple to use with a mac." Where to start, what to do?
Thanks all!

Does this page contain anything useful?
(21902)

Vhost configuration for Adobe Media Server running under linux.

Please help me with Vhost configuration for Adobe Media Server running under linux.
I was running a media sharing website for which I wanted to use Adobe Media Server.
To use, AMS, I disabled the already installed Apache server and installed AMS along with the built in Apache server. I could successfully install AMS and could login to AMS Admin Console through my IP number.
My existing website, www.mydomain.com is having its contents located at:
/home/mydomain/public_html
(Directory created under the old version of Apache not bundled with AMS)
Users will be uploading their videos, which will get transcoded and will be delivered to the website visitors in the existing scenario.
To use this website with AMS, this is what I did:
I created a folder for my domain, www.mydomain.com as below
/opt/adobe/ams/conf/_defaultRoot_/www.mydomain.com
Copied Application.xml and Vhost.xml from /opt/adobe/ams/conf/_defaultRoot_/ and pasted them in /opt/adobe/ams/conf/_defaultRoot_/www.mydomain.com
In the Application.xml file there are 2 entries:
<Alias name="mydomain.com"></Alias>
<AppsDir>${/home/mydomain/public_html}</AppsDir>
Please help me with further steps to be completed:
Do I need to create a separate VirtualHost entry in the Apache installed with AMS?
If yes, can I specify already existing document root for my website (/home/mydomain/public_html) or do I need to create a separate folder under webroot/Apache ?
If yes to point 2 above, then do I need to copy all the existing contents from /home/mydomain/public_html to the newly created folder ?
I hope, I can serve all my static contents like html pages and php and media like video/audio. In that case do I need create alias to my Media/Alias folder or AMS will automatically start streaming when a video/audio is requested ?
What other steps do i need to complete?
Any help in this regard would be highly appreciated.
Thanks and Regards

Dear sir or madam,
Here is Letswin Technology, which specializes in global servers, web hosting, VPS, VPNj. If anything I can do for you, pls contact us!
Have a nice day!

0x80070643 Fatal Error During Installation of PLEX Media Server Setup

Hi,
I had gotten a rather pesky virus and was finally able to flush it out thanks to Malware Bytes. However, now nothing will install.
Currently, I'm trying to install Plex Media Server, and I get the "0x80070643 Fatal Error During Install".
What can I do to undo this damage and get things to download smoothly again?
Just in case, here's a log of the last Plex install attempt:
[0184:1960][2014-04-10T13:10:58]i001: Burn v3.7.1224.0, Windows v6.1 (Build 7601: Service Pack 1), path: C:\Users\Michelle\Desktop\Downloads\Plex-Media-Server-0.9.907.429-f80a8d6-en-US.exe, cmdline: ''
[0184:1960][2014-04-10T13:10:58]i000: Initializing string variable 'InstallFolder' to value '[ProgramFilesFolder]Plex\Plex Media Server'
[0184:1960][2014-04-10T13:10:58]i000: Initializing string variable 'LaunchTarget' to value '[InstallFolder]\Plex Media Server.exe'
[0184:1960][2014-04-10T13:10:58]i000: Setting string variable 'WixBundleLog' to value 'C:\Users\Michelle\AppData\Local\Temp\Plex Media Server_20140410131058.log'
[0184:1960][2014-04-10T13:10:58]i000: Setting string variable 'WixBundleOriginalSource' to value 'C:\Users\Michelle\Desktop\Downloads\Plex-Media-Server-0.9.907.429-f80a8d6-en-US.exe'
[0184:1960][2014-04-10T13:10:58]i052: Condition '((VersionNT >= v5.1) AND (ServicePackLevel >= 3)) OR ((VersionNT >= v5.2) AND (ServicePackLevel >= 2)) OR (VersionNT >= v6.0)' evaluates to true.
[0184:1960][2014-04-10T13:10:58]i000: Setting string variable 'WixBundleName' to value 'Plex Media Server'
[0184:1960][2014-04-10T13:10:58]i100: Detect begin, 1 packages
[0184:1960][2014-04-10T13:10:58]i101: Detected package: pms, state: Absent, cached: None
[0184:1960][2014-04-10T13:10:58]i199: Detect complete, result: 0x0
[0184:1960][2014-04-10T13:11:02]i200: Plan begin, 1 packages, action: Install
[0184:1960][2014-04-10T13:11:02]i000: Setting string variable 'WixBundleRollbackLog_pms' to value 'C:\Users\Michelle\AppData\Local\Temp\Plex Media Server_20140410131058_0_pms_rollback.log'
[0184:1960][2014-04-10T13:11:02]i000: Setting string variable 'WixBundleLog_pms' to value 'C:\Users\Michelle\AppData\Local\Temp\Plex Media Server_20140410131058_0_pms.log'
[0184:1960][2014-04-10T13:11:02]i201: Planned package: pms, state: Absent, default requested: Present, ba requested: Present, execute: Install, rollback: Uninstall, cache: Yes, uncache: No, dependency: Register
[0184:1960][2014-04-10T13:11:02]i299: Plan complete, result: 0x0
[0184:1960][2014-04-10T13:11:02]i300: Apply begin
[17F4:1200][2014-04-10T13:11:08]i360: Creating a system restore point.
[17F4:1200][2014-04-10T13:11:29]i361: Created a system restore point.
[17F4:1200][2014-04-10T13:11:29]i000: Caching bundle from: 'C:\Users\Michelle\AppData\Local\Temp\{e9921c42-812d-4b39-9c02-612724349e82}\.be\pms.exe' to: 'C:\ProgramData\Package Cache\{e9921c42-812d-4b39-9c02-612724349e82}\pms.exe'
[17F4:1200][2014-04-10T13:11:30]i320: Registering bundle dependency provider: {e9921c42-812d-4b39-9c02-612724349e82}, version: 0.9.907.0
[17F4:1618][2014-04-10T13:11:32]i305: Verified acquired payload: pms at path: C:\ProgramData\Package Cache\.unverified\pms, moving to: C:\ProgramData\Package Cache\{69D8C4EA-5363-48FB-AB13-5F8FF61DF7C3}v0.9.907\pms.msi.
[17F4:1200][2014-04-10T13:11:32]i323: Registering package dependency provider: {69D8C4EA-5363-48FB-AB13-5F8FF61DF7C3}, version: 0.9.907, package: pms
[17F4:1200][2014-04-10T13:11:32]i301: Applying execute package: pms, action: Install, path: C:\ProgramData\Package Cache\{69D8C4EA-5363-48FB-AB13-5F8FF61DF7C3}v0.9.907\pms.msi, arguments: ' ARPSYSTEMCOMPONENT="1" MSIFASTINSTALL="7" INSTALLLOCATION="C:\Program
Files (x86)\Plex\Plex Media Server"'
[17F4:1200][2014-04-10T13:13:26]e000: Error 0x80070643: Failed to install MSI package.
[17F4:1200][2014-04-10T13:13:26]e000: Error 0x80070643: Failed to execute MSI package.
[0184:1960][2014-04-10T13:13:26]e000: Error 0x80070643: Failed to configure per-machine MSI package.
[0184:1960][2014-04-10T13:13:26]i319: Applied execute package: pms, result: 0x80070643, restart: None
[0184:1960][2014-04-10T13:13:26]e000: Error 0x80070643: Failed to execute MSI package.
[17F4:1200][2014-04-10T13:13:26]i318: Skipped rollback of package: pms, action: Uninstall, already: Absent
[0184:1960][2014-04-10T13:13:26]i319: Applied rollback package: pms, result: 0x0, restart: None
[17F4:1200][2014-04-10T13:13:26]i329: Removed package dependency provider: {69D8C4EA-5363-48FB-AB13-5F8FF61DF7C3}, package: pms
[17F4:1200][2014-04-10T13:13:26]i351: Removing cached package: pms, from path: C:\ProgramData\Package Cache\{69D8C4EA-5363-48FB-AB13-5F8FF61DF7C3}v0.9.907\
[17F4:1200][2014-04-10T13:13:26]i330: Removed bundle dependency provider: {e9921c42-812d-4b39-9c02-612724349e82}
[17F4:1200][2014-04-10T13:13:26]i352: Removing cached bundle: {e9921c42-812d-4b39-9c02-612724349e82}, from path: C:\ProgramData\Package Cache\{e9921c42-812d-4b39-9c02-612724349e82}\
[0184:1960][2014-04-10T13:13:26]i399: Apply complete, result: 0x80070643, restart: None, ba requested restart: No

Hi,
Make sure you have turned on Windows Firewall:
1. Click the Start button. In the search box, type Windows Firewall, and then, in the list of results, click
Windows Firewall.
2. In the navigation pane, click Turn Windows Firewall on or off.
3. For each group of settings shown, select Turn on Windows Firewall, and then click
OK.
After that, download and install again. If the issue still persists, try to run
sfc /scannow command to repair the system for test:
Use the System File Checker tool to repair missing or corrupted system files
http://support.microsoft.com/kb/929833
Karen Hu
TechNet Community Support

Plex Media Server Access Via Closed Port

Hey All,
I'm running Plex Media Server on my home server (running Arch of course) and am curious how it is able to run and be accessed on port 25244 when both my router and iptables config do not have this port opened? I can access the server via port 32400, but if I go into the app settings and connect it to a myPlex account, it allows the server to be mapped to 25244.
Thanks in advance!
- James

Hi dlw,
Thanks for the reply. I have installed plex server on my home PC (which I was going to use as the server pc - a windowns 7 - 64bit) and then install plex on my ipad so that I can watch films and listen to music held on my PC.
I've installed the lastest versions of silverlight and flash and also installed the plex server software. However, when I right click on the tray icom and select media manager it tries to open http://www.localhost.com:32400/manage/ in firefox but keeps getting timed out.
Haven't got a clue why or how to resolve it, but slowly trying me insane.

How to configure network virtualization in SCVMM 2012 R2 with two host

hi everyone... can you teach me how i configure networking in my infrastructure..
i am getting confuse that i have 2 phisical server, i don't know to set the netwokring in scvmm. Every best practice, i found in internet is using more than 2 physical server.
i have been tried before with the networking which i want..but it failed...
any one help me please...

This whitepaper should explain the required steps to get this working.
http://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a
The whitepaper will use more than two hyper-v hosts, but you'll get the picture.
You can have 1 host to run your NVGRE VMs, while the other host should be dedicated to run the virtualization gateway VMs.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

How to configure SMTP for iCloud?

I have never used the Mail program on my macs. I started using Eudora in 1995 and when Mail came along some years later, i didn't take to it, it didn't have the functionality i needed and enjoyed. Fast forward to a couple days ago, my Snow Leopard MacBook is wearing out and i got a new MacBook Pro running Mountain Lion. When i was setting up the new computer, i thought iCloud would be configured automatically. It wasn't because i have a couple of different Apple IDs but i think that is straightened out now and i'm signed in using the me.com email address and have my calendars and contacts syncing with iphone and my other computer. Mail is working, but only for my me.com email address which i rarely use. I mainly use a gmail address.
I don't want to use Mail and i don't want mail to be downloaded to it. That happened on my other computur, so that i had tens of thousands of messages in a program i never open and don't use. So i somehow turned it off so it no longer gets the mail from my other accounts. i don't want to receive email in Mail. But because i can't use Eudora in Mountain Lion, i need a new email client. Today, i downloaded and installed Mail Mate, i want to try it out. When I tried to use Mail mate to send an email i got a message saying "No SMTP server configured for iCloud." i googled how to configure SMTP for iCloud and what i found said it configures automatically. So i don't know what to do. I went to ICloud in system preferences and i don't see anything i can do there.
Is there anything i can get it to do to configure automatically? All my software is up to date, if that makes a difference.

i was persistently googling search terms for this problem and came across a link that gave information to the effect that for non Apple email clients, SMTP has to be configured manually, and the settings were provided. I entered them into Mail Mate and now it works. So thankfully, this problem is solved.

Reg: How to Configure internet for solaris 10 in x86 32 bit

Hi,
I am new to Sun Solaris can any one help me detailed step of how to configure internet for standalone pc. Thanks in Advance
Thanx
MA

OK, the classical way:
Open a terminal.
Type
ifconfig -a
ifconfig -a plumb
ifconfig -a
Note the differences, it will plumb ALL available interfaces this way. So, now you can see, which device is your network card.
Then perform a
ifconfig <interface> unplumb
for all the newly interfaces (aka those, that were new in the last ifconfig -a output).
Then, the simple way:
cd /etc
vi hostname.<interface-driver-name>0 (example: hostname.rge0, the driver would be rge, the instance is 0, and rge0 would have been displayed as an available interface in the last ifconfig command). Add the name of the host into this file.
Then
vi /etc/inet/hosts
and add the pair of IP-address and hostname.
If needed:
vi /etc/inet/netmasks
if you have a sub-divided network, and you need a differenbt subnet mask...
Then:
vi /etc/defaultrouter
and add the name or ip-adress of the gateway... (name only, if you have that name also in the /etc/inet/hosts file!)
Also:
vi /etc/nodename
and add the name of your host into that file, so that the system knows, who it is... ;-)
And: For the DNS you can then add the infos into:
/etc/resolv.conf
For example:
nameserver 192.168.2.1
or some such...
Then, as the last but one step:
ls /etc/nsswitch.*
and:
cd /etc
cp nsswitch.<what you need> nsswitch.conf (should be .files here!)
And the reboot... ;-)
HTH!
Matthias
P.S.: There might be some GUI, but I'm an old-timer, so I prefer the command-line version of things...

How to configure apache for ssl in windows platform

hi all,
can anyone help me expalin how to configure apache for ssl in windows platform.

George,
I would take the following 'first steps'
1)Install Apache20 on your Windows machine following the Apache online documentation
http://httpd.apache.org/docs-2.0/misc/tutorials.html
2)Make sure you can 'serve up' static HTML content from your Apache Server
3)Install Weblogic Server per our online documentation
http://edocs.bea.com/wls/docs61/install/index.html
4)Also, make sure you can 'serve up' both static and dynamic (e.g., JSP) content
directly from WLS server
5)Once you have both of the above 'sanity' checks attempt to configure a simple
proxy by ppath or mime type via our online documentation
http://edocs.bea.com/wls/docs61/adminguide/apache.html#103803
Chuck Nelson
DRE
BEA Technical Support

How to configure webutil in oracle application server 10g (9.0.4)?

hi,
i want to configure webutil for oracle application server 10g(9.0.4).
how should i start?
i have read the webutil mannual.it is bit tricky.
i want step by step configuration.
Any sort of help is appriciateable.
Regards,
abbasyazdani

hi,
In webutil directory structure,there r four folders,
{color:#0000ff}doc
java
server
webutil{color}
and there are three files.
{color:#0000ff}webutil.pll,webutil.old and create_webutil_db
{color}
In webutil mannual,it is written that we should extract this folder to forms90.
But in forms90, there are {color:#0000ff}server and java folders.
{color:#000000}should i replace forms90's sever and java folder with webutil's server and java folder?
what should i do for this ?
regards
abbasyazdani
{color}{color}

How to configure Sun Java System Application Server Enterprise Edition 8.1

hi all,
How to configure Sun Java System Application Server Enterprise Edition 8.1 to my IDE..( jstudio)
I have installed jes for my windows system.. so that i have removed platform version of Application Server..
I try to add the Enterprise application Server (Sun Java System Application Server Enterprise Edition 8.1) to JStudio IDE..
but i couldn't;

Configuring your IDE to integrate with Sun App Server is something you probably will have to ask in some sort of JStudio forum. Other than for Netbeans, Eclipse, or possibly IntelliJ IDEA, you might not have much luck answering an IDE question here. I could be wrong though. Maybe somebody will have an answer for you and set me straight.

How to configure wokflow for MRP generated & manually created PR

Dear Gurus,
I have to customize SAP workflow for releasing Purchase requisitions. I will be using enhancement M06B0001 for my own role resolution.
I have some questions regarding workflow
1) How to configure workflow for MRP generated & manually created PR?What are the steps? what are the limitations in doing so?
2) Since we are facing the problem of insufficient user license ,How to send notifications to NON SAP users?(We have thought of creating a Z table for the same)
Looking forward to your reply,
Thanks in advance,
Best regards
Tushar
SAP MM Consultant

Dear Mike,
Thanks for your reply, & sorry for not responding on time.
Here are my constraints:
1) Not a single component of HR module will be implemented.(Project management decision:-()
2) Number of user licenses are less, considering the workflow users.(Hence we have thought of creating Z table for employee nos. & EMAIL IDs ,& this table will be accessed by using M06B0001 user exit.(It is still in development phase. Truely speaking, dont know whether it will work or not).If this works out ,then I believe, record from SU01 will not be used (Please correct me here).
3)We have 2 instances on development server.(in short,2 separate installations on same server by creating additional instance). What are the implications of this particular system landscape on workflow? Whether workflow will work or not??:-(, :-(.
The reason I asked you 3rd question is , As soon as 2 nd instance was created on development server, Short Dumps are coming while running transactions of Workflow builder.(SWDD & PFTC).It is giving error" Table is unknown or does not exist". Description of error says"The current program"SAPLSWF3 had to be terminated because one of the statements could not be executed."
"An SAP Open SQL Statement contains a table that does not exist in the database or is not listed in the ABAP Data dictionary.The Table is "SWF_WFPDSC" or another table is accessed in the statement.
Program=SAPLSWF3
Include=LSWF3U05
Row=22
Module name=SWF_WFP_REPOSITORY_CONTENT_GET
The same dump is coming while accessing SWF_WFPVW table from SE16.
Request to Mike & all of you, help me in this regard.
Thanks in Advance,
Regards,
Tushar

Please add Plex Media Server support in addition to Twonky Server

Please add Plex Media Server support in addition to Twonky Server Plex has:- better client UI- organized information and better use of online meta-data WD MyCloud has the hardware necessary to run a Plex Media Server

I agree without plex the WD EX4 is just another storage device. I'm looking for something that will allow me to stream the content in a great looking UI and simplify things for my family. Plex support is needed if you expect to compete with Synology etc. Had I known PLEX was not supported I would of certainly went another route. I do appreeciate the WD EX 4 and not had as many issues as others with the device but PLEX support is basicly a requirment for new devices and it is a shame is not supported by WD EX 4.

How to configure network for Plex Media Server

Similar Messages

Maybe you are looking for