How to configure Network proxy to use PAC file on Multiple machines ?

Hello all,
If I've posted in the wrong Forum let me know and I'll move ...
I have been asked by my Network team to change the proxy setting to use a .pac file on all our Macs.
I use ARD a lot and know I can change a lot settings using the networksetup command line tool inside the ARD package and that's great! But I can't see a command listing for changing to use a PAC file.
Any suggestions here people ?
Regards
Mitch

I think you have the right Forum personaly!
With no experiemce or knowledge of .pac files, do either one of these help you?
http://www.byteclub.net/blog/cwoodward/category/macos-x/
Scroll to... Wrong proxy settings? Write your own .pac!
http://www.macosxhints.com/article.php?story=20040101095553265
Says Panther, but perhaps Tiger is the same.

Similar Messages

How to configure a proxy server for Windows Azure Tools in Visual Studio 2013

Hi Visual Studio/Azure Tools team
I would like to use the Windows Azure tools in Visual Studio 2013 to manage my Azure Web sites (Server Explorer -> Windows Azure -> Web Sites) from within my corporate network which is secured using a proxy server. Unfortunately, I am not able to use
the Windows Azure tools since the required HTTPS connection to windows azure is not going through the default configured proxy. Instead, Visual Studio tries directly to connect to port 443 which is blocked by our corporate firewall (and yes: there is no way
around using our proxy server). Other visual studio features like NuGet, updates, etc. work fine and use the configured proxy server.
So my question: How can I configure visual studio respective its Azure tools to use a proxy server instead of a direct connection? I already tried configuring the proxy server within the file devenv.exe.config but this doesn't show any effect for Windows Azure
tools.
Regards
tschaena

As we have very similar problems I consider the found solution a work arround an existing problem which will not work if corporate FW policy does not allow such changes.
In my mind, any tools in charge of dealing with some sort of FW protocols should deliver the following information, should make it absolute clear how to setup that the request packages are setup rigth at the first time.
a) proxy server
b) proxy port
c) proxy user
d) proxy users-password
e) proxy.auth.Preference="BASIC"
And for moste tools (including Visual Studio and AZUR Tools) it is absolut unclear
a) how to setup that on a per tools basis
b) OR who inherits this information from whom i.e. use the same as IE does, what if we use FireFox or any other browsers?
I understand that developers requested to cure such problem areas will often have difficulty to gain all required elemenst used to realy test the solution.
But I can tell you: I loos more time figthing down the FW setups for my clients. WHat I do at home in a sniff, takes ages to be realised by all the various clients on the market where each has to deliver the same sort of information but actually does not,
or has it just somewhere, but not in the vicinity of the demanding user.
Good examples i.e. NetBeans IDE where the Option Menu shows very clearly what information is required to pass through a FW/Proxy; but even there, the hint to start with a BASIC authentication schema is not part of this OPTION menu and must be added a JAVA
environment value. But at least, it works.
Sepp

How to configure network virtualization in SCVMM 2012 R2 with two host

hi everyone... can you teach me how i configure networking in my infrastructure..
i am getting confuse that i have 2 phisical server, i don't know to set the netwokring in scvmm. Every best practice, i found in internet is using more than 2 physical server.
i have been tried before with the networking which i want..but it failed...
any one help me please...

This whitepaper should explain the required steps to get this working.
http://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a
The whitepaper will use more than two hyper-v hosts, but you'll get the picture.
You can have 1 host to run your NVGRE VMs, while the other host should be dedicated to run the virtualization gateway VMs.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

How to configure a scenario which posts same file to different directories

How to configure a scenario which posts same file to different directories of a receiving system?
Consider an Idoc to file scenario where I have to post same file to two different directories but logical receiver system has to be same.

Hi,
You can try out like this: Using multiple receiver interfaces you can send it to multiple directories with the help of enhanced interface determination/conditions and with the help of multiple receiver communication channels.
Another option is to copy the file from one target directory into another directory with the help of Unix script by executing the same from the OS command level.
One more option is to create a Java Server Proxy and inside the proxy, you can write java code to FTP into different locations.
Hope this helps,
Regards,
Moorthy

HT201066 How can I split a long recording audio file into multiple audio files?

Hi,
How can I split a long recording audio file into multiple audio files?
With Windows I was using Nero software, which is not available for Mac. Is there any similar app for free for Mac?
Thanks!

Hello ingiorgio
You can import the track into GarageBand and then split the tracks there. Once that it is done you can highlight the ruler section and then share the song to iTunes to get them separated out.
GarageBand - Split regions in the Tracks area
http://help.apple.com/garageband/mac/10.0/#gbnd76fcce04
GarageBand - Share songs to iTunes
http://help.apple.com/garageband/mac/10.0/#gbndfb96a96f
Regards,
-Norm G.

Starttin Oracle using received files on another machine

Hello gurus,
Someone sent me 6 dbf files including sys,temp, undo and the rest plus 3 log files plus one ctl file and finally a spfile.
I want to create and startup the database using those files on my machine.
Can someone please give me the details and the steps how can I do that. I am experienced DBA but haven't done it for long long time, never needed!!! so please feel free to talk Oracle language and detail and preferably step by step what I should do. I am assuming he had to send me a ctl file using backup to trac but not sure.
Any help appreciated
Thank you
BTW it is a 10g and I guess original machine was a Linux machine but I am not limited, I can use any Os on VM too.

If all control/online log/data files available(and these are not intact also correct) then just create new directory according files and create pfile(from your spfile).Then make change this pfile for your setting and try startup database as
export ORACLE_SID=<SID>
sqlplus "/as sysdba"
startup mount pfile='pfile_location'
/*IF your old and new directory structure are different
then you have to rename data and log files using
ALTER DATABASE RENAME FILE 'old_location' to 'new_location'*/
recover database;
alter database open;

How to configure ADF application to use OAM Identity Assertion ? web.xml

We have a web application developed using ADF (application development framework) and deployed on WebCenter 11.1.1.2 (weblogic 10.3.2)
OID Authentication and OAM identity assertion is configured in WebLogic 10.3.2 .
How to configure security in ADF application (web.xml or weblogic.xml) so that it uses OAM identity assertion (already configured as authentication providers in weblogic server)
Any pointers or documentation so that application (developed using ADF) check for identity tocken and verifies it with one of identity assertion providers.

John,
I have to concur. With OAM you don't need this. OAM intercepts the calls and inserts a cookie for WLS to get user information from.
I strongly advise to go through the above mention OFM Security Guide. Esp. Chapter 10 tells you in every detail how to implement OAM SSO with WLS (with or without OHS as a proxy).
Reading this chapter saves you time and turnarounds on this topic...
--olaf

How to configure network with just 1 ethernet adapter?

I was looking for a guide which would talk about how to configure your network in case if you have only 1 Ethernet adapter. Is it mandatory to have more than 1 network card to configure multiple ports? If not, what are the options available to deploy a Virtual Machine that can have applications which are available over the network. I don't have a separate network i.e. public network as well as management network is of same IP range.
I am having 2 node cluster using NFS for pools as well as repository.
~Yagnesh

yagneshg wrote:
I was looking for a guide which would talk about how to configure your network in case if you have only 1 Ethernet adapter. Just enable the "Virtual Machine" role on the Management network that is automatically connected. You will then be able to add guest vNICs to the same network.
I am having 2 node cluster using NFS for pools as well as repository. I strongly recommend you get at least one more physical NIC for your server, if not two: running NFS and the cluster heartbeat and the guest traffic all over the same network is going to put a lot of data down the wire and you may land up in a situation where the cluster traffic is overwhelmed and a node reboots. You need to be very careful in this situation. Network cards are cheap and you should have at least two or three, I reckon.

How to configure a Proxy in OSB with Digest Authentication?

Hello, Guys.
I need a help with this subject.
I have a demand to configure a Proxy in OSB 11.1.1.6 with Digest Authentication. I'm using a Embedded Ldap with Identity Asserter.
I'have configured a DefaultAuthenticator and the DefaultIdentityAsserter to support Digest Password and create a new LdapIdentityAsserter pointing to my embedded Ldap.
When I'll create a new Proxy, in the security options, i can see the digest options to authenticate my username and password. I selected the one of all the options, but in the time of the Proxy test the authentication didn't work.
Could anyone help me?
Thanks you.

Unfortunately, a reference trigger can't be used for continuous acquisition after the trigger. The maximum post-trigger count is either 2^24 or 2^32 depending on your hardware. Depending on your sampling rate and how many samples you expect to acquire before issuing a software stop, using the max post-trigger count may be sufficient for you. There are a couple of other options I can think of that you might want to try:
1.) If possible, play with the trigger condition such that it occurs at the start of your pre-trigger data and use it as a start trigger instead. I suspect this may not be possible.
2.) Set up a continuous acquisition and implement detection of the trigger condition through software. This is more software work and is more CPU intensive than the hardware solution, but it can definitely be made to work.
3.) With some creative use of the counters, you may be able to latch the sample clock number that trigger occurred on. This would allow you to setup a continuous acquisition and use the hardware to tell you where the trigger occurred instead of figuring it out in software. What I'm thinking is you would set up a buffered event counting task with the ai/SampleClock as the timebase source of the counter and the trigger signal as the sample clock of the counter. By reading the first count value, you should know which AI sample the trigger occurred. From there, you can seek to the right position in the buffer and begin reading data indefinitely.
Good luck!

How to configure network printer on solaris 10 intel based

how to configure the network printer in solaris 10
like hp laserjet printer/printers,

Very very easy.
Go to the print manager . (printmgr I believe or in the launch menu under preferences)
select add a network printer
Fill out the info. I find that the hpijs printer driver works better then the suggested foomatic on my hp 4000s. I could not print pdfs otherwise.
Other things to know is the protocol should be BSD (at least it works for me). And add the port to the destination so 192.168.0.1:9600 for example (for hp).
thats about it. To have it show up correctly in JDS you should probably add it to the printer list under the launch->preferences->printer preferences.

How to configure internet proxy for portlet builder

Hi All,
We have downloaded the portlet builder from developer.bea.com. But while trying
to access xmethods for adding web service, it can't access as the internet connection
is thru proxy.
Can anybody pls tell me how to configure the internet proxy with this portlet
builder ?
TIA,
Sudarson

Hi, I got the same problem...I try to configure a web service with Portal Builder
7.0 in Bea E-Business Control Center... But I can not proceed cause there is no
hint for a proxy... Have you found a solution?
"sudarson" <[email protected]> wrote:
>
Hi All,
We have downloaded the portlet builder from developer.bea.com. But while
trying
to access xmethods for adding web service, it can't access as the internet
connection
is thru proxy.
Can anybody pls tell me how to configure the internet proxy with this
portlet
builder ?
TIA,
Sudarson

How to configure webcenter services to use external LDAP?

Reassociating the identity store with an external LDAP server is mandatory only if you're using the Documents service and/or the Discussions service, in which case the WC_Spaces server, Content Server, and Collaboration server must all be configured to use the same external LDAP server.
The question is how to configure?
Is there any document which details this?
Please help! this is urgent.
Regards

Refer
http://docs.oracle.com/cd/E28280_01/webcenter.1111/e12405/wcadm_security_id_store.htm#WCADM1845
http://docs.oracle.com/cd/E28280_01/webcenter.1111/e12405/wcadm_security_id_store.htm#WCADM345
Thanks

How to configure local account to use local software update service?

ok folks here is the question. i have OD setup and i configured network users to get updates from my software update and it works just fine. the one thing i cant figure out is how can i configure local machine accounts to get updates from that same server.
any help would be appreciated.

Hi VMF
OK I understand what you are saying. In which case why dont you apply the managed preference at machine level?
Failing that create an account on the server which is the same as your local admin account. Ideally all the local admin accounts should have the same name and password and the name should be different to the server admin account. One or both of these suggestions should work. HTH

How to configure RAID 5 sys using SAS controller for APP CS4

Hi I would like to know how to configure my 3 HardDrives (600GB each) on RAID 5 connected to SAS controller to work smoothly with PremierePro CS4. Mainly to store scratch disk, and all preview files, etc.. At present it shows as one big hard drive in C:\ It shows as follows: OS(C 0.98 TB free of 1.08TB I would like to have at least one HDD out of 3 to store my scratch disk files and preview files... I have installed only CS4 Master Collection + Windows 7 64bit Ultimate as OS in this machine. Following is my system configuration: Intel Xeon E5620, 2.4GHz processor/12M Cache, 5.86GT/S, QPI, Turbo, HT, 4C Intel 5520 Chipset 12GB DDR3 RDIMM Memory,1333MHz, ECC Three 600GB (15000rpm) SAS HardDrives Perc6/i SAS/SATA Harware RAID card All SAS Drives, RAID 5, 3 drive configuration BlueRayBurner1GB PCIe X16 nVidia Quadro FX3800 ,Dual monitor DP+1 DVI Capable I am in a little bit strife on this. I am in a little bit strife on this and Open for any good and effective suggestions are much appreciated. Thanks Nathapushpa

You even have three more connectors free on your Perc controller, so you could add three more disks, without using any motherboard connectors.
I think you have two alternative approaches:
1. Add a smallish disk as a boot disk, i.e. a 150 GB Velociraptor and install OS and programs there and let your raid5 exist as it is, or
2. Add another 600 GB to your raid5 to make it a four disk array.
Of course you could also do both. Breaking the raid out to individual disks means that all data on the current raid will be lost, unless you have a backup available, but it will still mean a fresh install of OS & programs, so remember to deactivate Adobe before you do anything to your disk setup like in alternative 1 or breaking out the array.

How to configure global proxy under ios 7

I would like to know how to configure the global proxy so that I don't need to set for every wifi every time under iphone 5 ios7. It seems the function is not available under ios 7 right now? please help.

Page 27:
https://developer.apple.com/library/ios/featuredarticles/iPhoneConfigurationProf ileRef/iPhoneConfigurationProfileRef.pdf

How to configure Network proxy to use PAC file on Multiple machines ?

Similar Messages

Maybe you are looking for