How to configure network virtualization in SCVMM 2012 R2 with two host

hi everyone... can you teach me how i configure networking in my infrastructure..
i am getting confuse that i have 2 phisical server, i don't know to set the netwokring in scvmm. Every best practice, i found in internet is using more than 2 physical server.
i have been tried before with the networking which i want..but it failed...
any one help me please...

This whitepaper should explain the required steps to get this working.
http://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a
The whitepaper will use more than two hyper-v hosts, but you'll get the picture.
You can have 1 host to run your NVGRE VMs, while the other host should be dedicated to run the virtualization gateway VMs.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

Similar Messages

How to configure network interface only when cable inserted?

Hi there,
I was wondering if anyone here could help me with a minor configuration problem. I have a server with two network interfaces, I'll call one "internal" and the other one "external". It has NAT configured so that the "internal" interface gets served DHCP, can access the Internet, etc. My problem is that sometimes I want to run the server without anything connected to the internal interface, and at these times it seems that the boot process gets stuck on the "bringing up internal interface" part. (It's a bit hard to know exactly what's going on because the server is headless.) I am using a script in /etc/network.d/, set to static IP address, for the internal interface.
Does anyone know how I could configure Arch so that it only tries to bring up the internal interface if something is actually connected to the port? Otherwise I have to physically go to my server and plug in my laptop to keep the boot process going... let me know if I should provide more details.
Thanks for your suggestions!

ifplugd? Which is used by net-auto-wired from netcfg.

How to Configure and Use Oracle's JMS Connector with Tibco EMS

Jeff,
I am getting the below exception while try to do the deployment of the sample provided on 'How to Configure and Use Oracle's JMS Connector with Tibco Enterprise for JMS'
While deployment not able to get the 'TibcoJMSReference',
As I understand in the 'orion-application.xml for the below, unable to get the instance. Could you adivce how I can enable the trace more?
<resource-provider class="com.evermind.server.deployment.ContextScanningResourceProvider" name="TibcoJMSReference">
could you help to resolve the issue?
Error
Operation failed with error: No resource named 'TibcoJMSReference/TibcoXACF'found

Hi,
I'm also looking for the same 'Configure and Use Oracle's JMS Connector with Tibco JMS to consume message'. If you have already implemented and working fine, please let me know the steps and some documents.

How can i pay on the apple store online with two credit cards, with two different billing addresses

I will be greatful if you could answer me this question...
How can i pay on the apple store online with two credit cards, with two different billing addresses?
I know that you can use two credit cards to pay an item but the problem is that i can only put the billing address of just one of the credit cards, and since the two cards are from different people (my parents) i can't do it. They live in the same place so i don't know if i should just put one of the billing address.
Thank you.
PS. I don't know if this is the right community to ask this, sorry if i'm wrong.

On the Apple Store "Payment & Pricing" page it states:
Using more than one payment card
You can also combine payment methods to pay for your purchase. Choose from the following combinations of credit cards and Apple Gift Cards:
Credit card(s) - up to two
Apple Gift Card(s) - up to eight
Apple Gift Card(s) + one credit card
During checkout, if you are paying with a gift card issued by a credit card company, you can combine it with one credit card.

VMware ESX Cluster Port Groups not Replicated as Network Sites in SCVMM 2012 Logical Switch

To whom it may concern,
We have added our ESX 4.1 Update 2 Cluster that's being managed by VMware vCenter to SCVMM 2012 because we want to create a private cloud and use the resources of the ESX cluster. SCVMM is replicating all the vSwitch from the ESX cluster as a logical network
but it's not replicating the port groups on the vSwitch as Network Sites associated to the Logical Network.
May you please advise or confirm that this is the normal behaviour of SCVMM? Or is there any way that SCVMM would be able to recognize the port groups associated to the ESX vSwitch and replicate it a a Networks Sites associated to Logical Switches?
Your prompt response will be greatly appreciated.
Thanks in advance!

Hi Graham,
Thanks for your reply.
I understand that we need to configure the port groups in the vCenter server but SCVMM is only replicating the vSwitch as a Logical Network but not the port groups. It should also replicate the port group as a network site associated to the logical network.
On our VMware environment, we have port groups on different VLANs and being mapped to one physical NIC. When creating a VMware VM in a private cloud with a self-service user role we can't select the option to connect the port group that we've created from
the vCenter server. The only option it gives is the logical network (vSwitch) not the port groups within that logical network (vSwitch). Even if we create network site within the logical network (with assigned VLAN) in SCVMM, it randomly selects the port group
within the VMware vSwitch when we create a VM. We need the users with a self-service role to be able to select the port group from our vSwitch to assign the virtual NIC of the VM to a specific port group. In this way, they don't have to call or email us to
assign the VM to a port group.
I still don't understand why SCVMM does not map the port groups we've created from VMware vCenter server with user that has a self-service role. Is there any other way so that we can map the port group automatically to SCVMM?
Please advise. Thanks!

How to configure network with just 1 ethernet adapter?

I was looking for a guide which would talk about how to configure your network in case if you have only 1 Ethernet adapter. Is it mandatory to have more than 1 network card to configure multiple ports? If not, what are the options available to deploy a Virtual Machine that can have applications which are available over the network. I don't have a separate network i.e. public network as well as management network is of same IP range.
I am having 2 node cluster using NFS for pools as well as repository.
~Yagnesh

yagneshg wrote:
I was looking for a guide which would talk about how to configure your network in case if you have only 1 Ethernet adapter. Just enable the "Virtual Machine" role on the Management network that is automatically connected. You will then be able to add guest vNICs to the same network.
I am having 2 node cluster using NFS for pools as well as repository. I strongly recommend you get at least one more physical NIC for your server, if not two: running NFS and the cluster heartbeat and the guest traffic all over the same network is going to put a lot of data down the wire and you may land up in a situation where the cluster traffic is overwhelmed and a node reboots. You need to be very careful in this situation. Network cards are cheap and you should have at least two or three, I reckon.

How to configure network printer on solaris 10 intel based

how to configure the network printer in solaris 10
like hp laserjet printer/printers,

Very very easy.
Go to the print manager . (printmgr I believe or in the launch menu under preferences)
select add a network printer
Fill out the info. I find that the hpijs printer driver works better then the suggested foomatic on my hp 4000s. I could not print pdfs otherwise.
Other things to know is the protocol should be BSD (at least it works for me). And add the port to the destination so 192.168.0.1:9600 for example (for hp).
thats about it. To have it show up correctly in JDS you should probably add it to the printer list under the launch->preferences->printer preferences.

How to configure network on Oracle Solaris 10

Hi All,
I have created a new virtual machine on Windows Server 2003 and installed Oracle Solaris 10 on VMWare. Now I need to configure network on my Solaris virtual machine, So that i can access Solaris machine outside the VMWare. Can somebody help me out?
Regards,
S.Rizi

Hi,
I have created a new virtual machine on Windows Server 2003 and installed Oracle Solaris 10 on VMWare. Now I need to configure network on my Solaris virtual machine, So that i can access Solaris machine outside the VMWare. Can somebody help me out?Refer below thread.
Hope helps :)
http://www.linuxquestions.org/questions/solaris-opensolaris-20/configure-solaris-network-on-vmware-847849/
thanks,
X A H E E R

Deploy VMs with SCVMM 2012 R2 with Internet connection

Hello everyone,
I am trying to use SCVMM 2012 R2 to create a network that will eventually hold 2 clouds, but for the moment I can't seem to create the network and connect the VMs to the Internet.
My lab is this (all hosts are in a LAN, 192.168.0.0/24, gateway 192.168.0.1, and ONLY ONE NIC per HOST ):
1 host DC, DNS, SQL, SCVMM 2012 R2 (IP 192.168.0.8)
2 hosts with Hyper-V (IP 192.168.0.9 and 192.168.0.10)
I'm also planning to create some "virtual" networks for clustering and live migration, which will use the same physical NICs as the management network (since I have only one physical NIC per host).
Could you please give me a quick guide of how to set this up with SCVMM 2012 R2, so that I can take advantage of the new features (network virtualization, logical networks, logical switch) and for the VMs to be able to reach the Internet?!
Thank you so much.

Thanks for the reply.
My network architecture is exactly like the one described on your paper, with 2 differences:
1. I only have one host in the Production group and one host in the Gateway group
2. The first host has one physical NIC, the second host has 2 NICs, one internal and one with an Internet (routable) IP
After applying the logical switches on the hosts, I lost Internet connectivity on the gateway host (I have no idea why there is no logical Gateway Switch !!!). VMM completed the jobs with no error.
Any thoughts?

SCVMM 2012 R2 with 3PAR 7200

I want to configure our 3PAR to work with SCVMM so I can use rapid provisioning. I was wondering if anyone knew of the documentation on setting this up and how to configure SCVMM for this. I already have my 3PAR added to SCVMM storage under Arrays and I
cna see all my logical disks.
I'm just not sure how to configure it so I can use rapid provisioning.

I got it working. What I did is presented a LUN to my SCVMM server and created a mount point (instead of drive letter) for the new volume inside of the SCVMM Library. Then I refreshed my 3PAR in SCVMM and refreshed the library. Now it says SAN Copy Capable.
NOTE: I take it back. I go into it again and now it sans its not SAN Copy Capable. ARGH!
EDIT: Can I only have one VHDX on an entire SAN LUN? When I have just one it says SAN Copy Capable. When there is more than one it changes to NO

How to configure a shell and tube heat exchanger with Lab VIew to get data

HiI
In our undergraduate chemical engineering labboratory we want to configure our shell and tube heat exchanger with a DAq and Lab VIEW to get information about the temperaure (of the cold fluid stream being heated), the pressure (of the steam on the shell side of the heat exchanger) and the flowrate (of the water being heated).
Can anyone suggest thermocouples, pressure transducers and flowmeters to fit between the heat exchanger and the DAq?
P.S. the heat exchanger is already fitted with thermometers, a pressure gauge and a rotameter but we don't know how to connect these hardware to the DAq
Solved!
Go to Solution.

It sounds like you have enough information to pick out appropriate sensors, you just need to do the research. I would start looking through the Omega catalog, or give them a call - they're usually helpful. I can't take the time to spec out parts for you - that would be a lot of time spent on someone else's project. Most pressure sensors put out either a 4-20mA or 0-5V signal, either of which you can read through an analog input on a DAQ; measuring a 4-20mA signal requires a resistor to convert to voltage. Most of the NI DAQ boards can read a thermocouple on an analog input, but make sure that your hardware does support reading thermocouples. For accurate readings, use a device that has built-in cold junction compensation - for example, the SCB-68 connector block - and for the most accurate readings, get a board specifically designed for temperature measurement.
For the flow measurement, a standard, simple solution is an orifice plate. You put a differential pressure transducer across it, look up the appropriate equations, and use them to calculate the flow rate given the density of the fluid (which you'll be able to calculate from the pressure and temperature, since steam tables are widely available). There are other differential pressure devices available as well - at a previous job we used a V-Cone from McCrometer. If you call them they'll spec one for you - but get an approximate cost first to make sure it's within your budget.

How can i split Client Network traffic and My exchange traffic with two differnet ip address?

Hello Everyone
sorry for my bad English and also my bad explaine
here is my network looks like
all the client on one subnet and network is 192.168.0.0
i have Dsl router that connect to Tmg server
i have Tmg with two NIC
1-192.168.0.4
2- 2 Public Ip address
i want to do this
i want to split user's traffic and my exchange traffic
i mean i want to route user's traffic with one public ip addresss
and my exchange server's traffic with another public address
but when i add additional ip address at Tmg or create new NIC card
all of my traffic route with one public ip Address what should i do?

Hi Uhan,
You need to use ENAT fuction on TMG to achive this
On the External NIC assing the Second IP as Additionl IP address (VIP)
Create a network Rule to NAT traffice From Exchange server IP address to the required Public IP which you need the E NAT.
Ensure you are creating rule only from Exchange server IP and not all INternal.
Look at the below Doc you step by step config
http://www.isaserver.org/articles-tutorials/configuration-general/Configuring-One-to-One-NAT-TMG-2010.html

How to Configure a Servlet Chain Using MIME Types with weblogic5.1?

Hi ,
          I want to configure a servlet(cocoon) in weblogic 5.1 such that the
          servlet so configured is invoked each
          time a response with the mime-type "text/xml" is generated.
          1.) will weblogic support to configure a servlet with a particular
          mime-type so that it post-process any
          servlet's response with the corresponding mime-type?
          2.) if not what is the alternative?
          Thanks
          sumanth
          [sumo.vcf]


We suggest that use the request dispatcher interface instead. Servlet
          chaining is not a standard's based possibility.
          Michael Girdley
          WLS Product Manager
          Sumanth Chinthagunta <[email protected]> wrote in message
          news:[email protected]..
          > Hi ,
          > I want to configure a servlet(cocoon) in weblogic 5.1 such that the
          > servlet so configured is invoked each
          > time a response with the mime-type "text/xml" is generated.
          > 1.) will weblogic support to configure a servlet with a particular
          > mime-type so that it post-process any
          > servlet's response with the corresponding mime-type?
          > 2.) if not what is the alternative?
          >
          > Thanks
          > sumanth
          >

How to configure my oracle jdeveloper 11g preview 4 with oracle 8i database

hi every one
my requrirement is to configure my oracle jdeveloper 11g preview 4 with oracle 8i database with (thin driver)
thanks in advance

Prapan,
JDev 11g TP4 comes with 11g JDBC drivers, which do not support connecting to any database v 9.0.1 or earlier.
So, back to you... depends upon what you want to do. If you want to write your own code to connect to a database using 11g, get ahold of some JDBC drivers that support 8i and have away. If you're talking about getting the database development stuff (e.g. the embedded SQLDeveloper) to work, you're probably out of luck.
So, please define "configure my oracle jdeveloper 11g preview 4 with oracle 8i database"
John

How to display an double type variable's value with two decimals?

for exmple, what I do is:
double a = 1.5;
system.out.println(a);
I see 1.5 in the screen, however, I wanna display 1.50. how to do that?
I know how to round an double value, say, 1.555 to 1.56, but I can't find how to display a double value from one decimal to two decimal, any help will be very appreciate!

for exmple, what I do is:
double a = 1.5;
system.out.println(a);
I see 1.5 in the screen, however, I wanna display
1.50. how to do that?
you could convert the double to a string and then append a zero to the end
String str = Double.toString(a);
str += "0";
System.out.println(a);

How to configure network virtualization in SCVMM 2012 R2 with two host

Similar Messages

Maybe you are looking for