How to Configure ODI Console to Connect Multiple Master Repositories

Hi,
Can anybody help me in following,
1. How to configure ODI Console to access Multiple Master Repositories and its corresponding Work Repository?
2. Solutions are not supported by ODI Console? Is it possible to import scenarios as solutions in ODI Console?
Thanks
MT

MT,
1. I can only speak on my own experience in setting up the ODI console, but my understanding is that the console is configured against a single master repository - the connection details are picked up when the WebLogic server starts. If I'm wrong, I'm sure one of the gurus will correct me.
2. I haven't come across a way to do this - I'm using 11.1.1.5. Aside from my initial go-live, I tend to only promote individual scenarios across environments. For the rare occasion when I need to do a larger bulk import I'll just use ODI Studio.

Similar Messages

Multiple Master Repositories

Hi,
Can we have multiple master repositories under single user i.e under repository connection information dialog box we normally enter 'SUPERVISOR' and
SUNOPSIS as password and under Database Connection(Master Repository) can we have 2 master repository users as part of two connections?
i.e having two master repository conections under one SUPERVISOR User pointing same URL i.e database.
Cheers

Hi,
Yes you can create multiple master repository under SUPERVISOR user but different master repository schema in database.
Thanks

How to configure GDS console

Hi MDM-GDS experts,
I would like to fill the property sheet with dummy values .Would someone give me idea how to fill with dummy values so that i can work on.
Server -> services -> configuration adapter -> apps -> sap.cpm -> GDS -> appcfg -> propertysheet application
Kind Regards
JANA

MT,
1. I can only speak on my own experience in setting up the ODI console, but my understanding is that the console is configured against a single master repository - the connection details are picked up when the WebLogic server starts. If I'm wrong, I'm sure one of the gurus will correct me.
2. I haven't come across a way to do this - I'm using 11.1.1.5. Aside from my initial go-live, I tend to only promote individual scenarios across environments. For the rare occasion when I need to do a larger bulk import I'll just use ODI Studio.

How to configure one TREX host with multiple index servers ?

Hi All,
Does anyone know how to configure TREX on the one host,
with multiple index servers ?
Reason for this is to make better use of resources available on the host server(4 Gig, 4 Processor, Windows2003), to improve the search performance of
our KM content for portal users.
I am using TREX 7 and have not been able to do this,
despite reading the Single and Distributed install
documentation.
Any help would be appreciated.
Regards,
Andres

Hi Andres,
To make use of the RAM a Server provides you have to run two indexserver processes (each can then consume 2 GB);
Proceed like this:
1. Go to TREXdeamon.ini; check if section [indexserver2] is there (it is already provided, but not active in standard installation)
2. In TREXdeamon.ini go to
[daemon]
references sections below
programs=nameserver,preprocessor1,indexserver1,queueserver,alertserver
and add indexserver2 here. Restart TREX; second porcess is then started; can be checked in TREX monitor in Portal as well
3. To distribute existing indexes to the new process, start TREXadmintool and go to Index: Landscape
Go to the last two columns and move the indexes (move master here/secondary mouse click)
If you don't distribute the indexes the new index server process will be regarded when an new index is created.
Hope this helps!
cheers
Bettina

How to Configure SLD for Backend Connecting to SAP R/3

Hi All,
I installed SAP Netweaver04's sp7 sneak preview, now i need to connect to the backend Syatem SAP R/3, for this can you provide the info--How ro configure the SLD.
ADV Thanks
Phanikumar

Hi,
There are lot of info available with this URL
https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio
http://help.sap.com/saphelp_erp2005/helpdata/en/11/0dfe55e0c8fc4e910706a47ca6859b/frameset.htm
Configuring SLD in Sneak Preview SAP NetWeaver '04 Sneak
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fd876513-0a01-0010-65ad-a63701bedd8d
http://help.sap.com/saphelp_nw04/helpdata/en/3b/3e1b40fcdd8f5ce10000000a155106/frameset.htm
Thanks
Gopal
Message was edited by:
Gopal krishnan

How to configure/implement stateful r3 connection in Arfc2 model?

Hi,
After migration to Arfc2 model rfc function executed in different r/3 session.
How to configure/implement stateful behavior as arfc1 for using abap enqueue, transaction, shared between fm global variables from function group?
Wbr, Ivan

Hi,
thanks for your reply, but I'm afraid your post does not answer my question.
I don't have an issue concerning the state of the Web Dynpro Application - my problem is, that if I use ARFC2 (and not its predecessor ARFC1) to call an ABAP backend, every call to a function in this backend results in an independent session and this way doesn't share the same space in memory.
Indeed, you need less RFC connections this way, and this is an important advantage, but in some cases you have to redesign and rewrite substantial parts of an application if it was designed under aspects of ARFC1.
And I'm now looking for a way to have ARFC1-like behaviour with ARFC2.
Greets
Bernd

How to configure oracle listener profile for multiple oracle database

Hi,
I am going to install solution manager system in the same server of ERP EHP4 on Windows. Both DB are oracle.
I'd like to know how to configure listener in this kind of envirnmonent.
a. use two listener and different ports
b. use same listener but different ports
c. use same listener and same port
Which is the correct mothed?
And, after installation, there seem three set of profiles of listten, one for ERP, one for SLM, and the other for OS?(%windir%system32), which one is functional?
Please advise.
Thanks a lot.
Regards,
Alex

Hi,
standard installation is creating new configs for listener for each instance.
I would recommend to use one listener per each instance.
YOU CAN NOT HAVE one port number for two differnet systems!
If you want to use one listener than you must adapt tnsnames.ora, listener.ora and ensure that both systems will use different port numbers.
For example PORT= 15<system number>
Peter

How to configure request manager service for multiple website in one web application

I have set up sp 2013 as below:
web application : wa1
site collection : sc1
sp site: site1, site2
I used 2 WFE, 1 APP, how can I use request manager service to control site1 to wfe1, site2 to wfe2?
Awen

That's not what i'd describe as load balancing.
A better description would be load-isolation. In your description then if the load on site1 was large (and growing) but site2 was quiet then site1 would struggle and eventually become unable to handle the number of users but site2 would still be ok. That's
fine from a QOS point of view but it's not the norm for load balancing. It would work in simple scenarios but the out of the box load balancing tools are much better suited than that sort of approach.
This article shows how to configure the RMS and may help show how your request is difficult to configure:
http://www.harbar.net/articles/sp2013rm2.aspx

How to configure Database console on R12.1.3

Hii
I want to configure Database Console on my oracle R12.1.3, and my Database version is 11.2.0.2.
When i tried to run "*emca -config dbcontrol db -repos create*", it fails when giving the password for DBSNMP that invalid username/password error.
What will be the default password for DBSNMP user?? Or can i change the password for DBSNMP user.??
Plz help me in solving the issue
Waiting for your replies,
Thanks in advance.

When i tried to run "*emca -config dbcontrol db -repos create*", it fails when giving the password for DBSNMP that invalid username/password error.
What will be the default password for DBSNMP user?? Or can i change the password for DBSNMP user.??
Please see these docs.
Master Note for Enterprise Manager Configuration Assistant (EMCA) in Single Instance Database Environment [ID 1099271.1]
EMCA Failing with Invalid Password for Dbsnmp [ID 1264024.1]
EMCA Fails With "Invalid username/password" for DBSNMP or SYSMAN user when Creating DBConsole [ID 337260.1]
Troubleshooting the "ORA-01034: ORACLE not available" and "Invalid username/password." Returned by EMCA when creating DBConsole [ID 550484.1]
Thanks,
Hussein

How to configure CVC automation process using SNP master data and BI customer master data

Hi Gurus,
How to configure CVC automation in MPOS structure technically, using SNP master data in CVC creation such as Product and location details
and in parallel extract date from ECC to BI customer master data in DP. Where-in a APO BI cube should have only new combinations which are to be validated with ECC and existing combinations in the MPOS structure before creation of CVC in different regions of MPOS.
Second the automation should also check certain validations of product, location and are part of SNP-ECC master data and are these new combinations.
Could someone guide us in this process.
Thanks
Kumar

Praveen,
The short answer is to move the data into infoproviders or flat files for all of the 'characteristic-type' source data; and then copy CVCs from the infoproviders into the Planning area, probably using one or more Process Chains (program /SAPAPO/TS_PLOB_MAINTAIN).
The long answer is that this is not a trivial undertaking; this could end up being a pretty involved solution. If you do not have enough BW/DP expertise available locally to create this solution for you, then I recommend you consider engaging external resources to assist you. I personally wouldn't even consider starting to work on such a solution without first knowing a lot more about the detailed business requirements, and about any existing solutions that may already in place. An SCN forum is not really suitable for such an answer. In my opinion, the BBP doc alone would be 20+ pages, assuming no enhancements..
Best Regards,
DB49

ODI can't connect to Master Repository(SQLS05)

Hi guys,
my ODI can't connect to the MASTER REPOSITORY (SQLServer2005)!
It gives me an JDBC error when I try to test the connection!
The USR and PSWD are ok, what's the problem?!
Any suggestion would be appreciate!
Thanks in advance, bye all ;)

Hi,
Are you using the SQL server 2005 JDBC drivers, if so then it is a different connection string than in 2000
The connection details are :-
com.microsoft.sqlserver.jdbc.SQLServerDriver
The URI should look like this:
jdbc:sqlserver://myHost:1433;selectMethod=cursor;databaseName=myDB;integratedSecurity=false
Cheers
John
http://john-goodwin.blogspot.com/

How to Configure Cisco ASA 5512 for multiple public IP interfaces

Hi
I have a new ASA 5512 that I would like to configure for multiple public IP support. My problem may be basic but I am an occasional router admin and don't touch this stuff enough to retain everything I have learned.
Here is my concept.    We have a very basic network setup using three different ISPs that are currently running with cheap routers for internet access. We use these networks to open up access for Sales to demo different products that use a lot of bandwidth (why we have three)
I wanted to use the 5512 to consolidate the ISPs so we are using one router to manage the connections. I have installed an add on license that allows multiple outside interfaces along with a number of other features.
Outside Networks (I've changed the IPs for security purposes)
Outside1 E 0/0 : 74.55.55.210 255.255.255.240 gateway 74.55.55.222
Outside2 E 0/2: 50.241.134.220 255.255.248 gateway 50.241.134.222
Inside1 : E 0/1 192.168.255.1 255.255.248.0
Inside2 : E 0/3 172.16.255.1 255.255.248.0
My goal is to have Inside 1 route all internet traffic using Outside1 and Inside 2 to use Outside2.    The problem is I can't seem to do this. I can get inside 1 to use outside 1 but Inside2 uses Outside 1 as well.
I tried adding static routes on Outside2 to have all 172.16.248.0/21 traffic use gateway 50.241.134.222 but that doesn't seem to work.
I can post my config up as needed. I am not well versed in Cisco CLI, I've been using the ASDM 7.1 app. My ASA 5512 is at 9.1.
Thanks in advance for the suggestions/help

I have been away for a while and am just getting caught up on some posts. so my apology for a delayed response.
I find the response very puzzling. It begins by proclaiming that to achieve the objective we must use Policy Based Routing. But then in the suggested configuration there is no PBR. What it gives us is two OSPF processes using one process for each of the public address ranges and with some strange distribute list which uses a route map. I am not clear what exactly it is that this should accomplish and do not see how it contributes to having one group of users use one specific ISP and the other group of users use the other ISP>
To the original poster
It seems to me that you have chosen the wrong device to implement the edge function of your network. The ASA is a good firewall and it does some routing things. But fundamentally it is not a router. And to achieve what you want were a group of users will use a specified ISP and the other group of users will use the other ISP you really need a router. You want to control outbound traffic based on the source of the traffic, and that is a classic situation where PBR is the ideal solution. But the ASA does not do PBR.
HTH
Rick

How to configure AutoAtendant on Unity Connection

Hi,
I have a Cisco CallManager 8.6 and a Cisco Unity Connection 8.6 on VMWare.I purchased the bundle (solution) Cisco BE 6000.
I did the integration of the Unity Connection with the CUCM via SIP (I also created a trunk SIP on CUCM to access CUC).
I would like to use the Unity Connection as AutoAttendant.
To do this I saw in the forum that I have to configure:
- a CTI Route Point with a DN on CallManager.
- To do a "forward all" on CTI Route Point to the VoiceMail
- On CUC to Add a new System Call Handler and to assign the same DN than the CTI Route Point
- to go to the Call Handler and to change the default message via My Personal Recording.
it would be well?
would I also have to create a end user on CUCM with Associated Device the CTI Route Point to see this DN as User with Voice Mail on CUC?
I would like that the AutoAttendat after Greeting to transfer the call to the DN which is the Pilot of Attendant Console. This action I don´t know how to do it.
I'm confused because I see on Call Handler a field called "After Greeting" with some settings (Call Action, Call Handler, Directory Handler, Conversation, User with Mailbox) but I don´t see any parameter where I can configure the DN to transfer the call.
I also the field called "Call Transfer Rules" but I am confused.
Another thing, could I to configure the CUC for the Auto Attendant works in one way some days (office hours) and out office hours and holidays works in other way?
It is possible to do on CUC to upload "Recorded Prompts" as UCCX Express to configure them as Greetings or I have to record My Personal Recordings with a Phone?
Can you help me, please?
Thank you very much

Hi,
I continued doing tests but I don´t get that the call is transfered to the Attendant Console Pilot after Greeting.
Sometimes I think that the Unity doesn´t know how to get to Atendant Console Pilot Point.
I read in the forums that I need to configure a call system transfer, by default transfer numbers that are recognized are only elements from CUC and to dial any other number which is not configured on CUC you need a call system transfer.
I also that I need a caller input or a routing rule to reach a call system transfer.
But in my case I want that after greeting the external call (DID) goes to Attendant Console Pilot without dialing any key, ie the outside caller call and he gets the greeting and after is redirected to the Attendant Console Pilot. Therefore I think I don´t need to configure any "caller input".
I did some tests with routing rule but I had not any luck. Could be due to the Unity Connection doesn´t know to get the Attendant Console Pilot.
Remember that I did the integration between CUCM and CUC via trunk SIP. How the Unity Connection knows that to get the Attendant Console Pilot it has to go to the CallManager (via SIP)?
I am confused.
Can you tell me how can I do this?
Regards

How to configure oracle dataguard for connecting to the second nic.

hi
i want deploy my oracle dataguard on a remote site on a separate lease line
and on the second nic of the primary. i just have a concern that what
configurations should be made in the primary or standby to make sure the replication can work as the first nic is connected to receive the general database
data and the second nic is being planned for replication only.
so how standby will come to know that it has to pick which one of then.
waiting for an early reply
manish lall
[email protected]

thanks for the reply
does that mean nothing is to be needed to configure for oracle standby as such.
can you give me some idea of how this ip routing configuration will be done

How to configure ODI for server and client correct?

Hi forum,
this is my first post and i hope you guys can help me out ...
i
am new to ODI and WLS and in my case ODI need to run on a server where a couple of clients can connect to, work on the same project with their own workspaces and accounts.
The database will be located on the same server.
As far as i understood, i need to install the the ODI Java EE type (not the standalone type) with a WLS ?!
iI already nstalled
JDK 6u41 (x64),
ODI 11g (11.1.1.6, generic),
Oracle DB 11g R2 enterprise and
WebLogic 11g (10.3.6, generic)
on the Server and now i am trying to connect to the ODI repositories from a client with an ODI standalone installation.
I am now trying to insert a Data Source into the physical agemt (not even sure if i need to do this in my case).
Following these instructions (http://docs.oracle.com/cd/E17904_01/integrate.1111/e12643/setup_topology.htm#CHDHJBAD) i get an ODI-26029 error.
Below are some configuration information of the software i installed.
h3. ODI
Installation:
Installationtype: full
Oracle home directory: Oracle_ODI1
Agent name: odi_agent
Agent port: 1987
Repositories/connection:
Master repository user = odim
Work repository user = odiw
Work repository name = WORKREP1
JDBC connection string = jdbc:oracle:thin:@localhost:1521:orcl
*odim and odiw have been created manually with grant options on connect and resource
Physical agent (with no datasource defined):
Name = OracleDIAgent
Host = localhost
Webapplicationcontext = oraclediagent
Port = 8001
Protocol = http
Physical data server:
Name = oracle_db_11gr2
User = odiw
JDBC connection string = jdbc:oracle:thin:@localhost:1521:orcl
Physical schema:
Schema (schema) = ODIW
Schema (work schema) = ODIW
Context = aMIS_dev
Logical schema = oracle_db_11gr2
Logiacal schema
Context = aMIS_dev
Physical schema = oracle_db_11gr2.ODIW
Context:
Name = aMIS_dev
Logical agent = OracleDIAgent
Physical agent = OracleDIAgent
Logical schema = oracle_db_11gr2
Physical schema = oracle_db_11gr2.ODIW
Logical schema:
Name = oracle_db_11gr2
Context = aMIS_dev
Physical schema = oracle_db_11gr2.ODIW
Logical agent
Name = OracleDIAgent
Context = aMIS_dev
Physical Agent = OracleDIAgent
h3. Oracle DB 11g R2
Installation
Global database name = orcl.otera.local
SID = orcl
h3. WebLogic 11g:
+1. generate new basic WebLogic Server domain+
Domainname = ODI-DOMAIN
Admin name = weblogic
Admin server name = AdminServer
Listening port = 7001
Managed server name = odi_server1
Managed server port = 8001
+2. extend an existing WebLogic domain+
Choose extension source: ODI - Agent, ODI - Agent Libraries, Oracle JRF
Window: Configure JDBC compontent schema:
Driver = Oracle's Driver (Thin) for Instance connection; Versions: 9.0.1 and higher
Schema owner = odim
DBMS/Service = orcl
Hostname = localhost
Port = 1521
Client name = LocalODIMachine
Listening address of the accountmanager = localhost
Listening port of the accountmanager = 5556
Really hope you guys can help me quick.
Thanks in advance

Hi DecaXD,
thank you for quick response :)
on the client site i tried to establish the connection to the work repository with the following connection information:
Login information*:
Oracle Data Integrator Connection
Login name = odi_server
User = SUPERVISOR
Database connection (Master Repository):
User = odim
URL = jdbc:oracle:thin:@<server ip>:1521:orcl
A work repository could be found, but the connection failed! (?!)
" ODI-26130: Connection to the repository failed.
oracle.odi.core.config.NotWorkRepositorySchemaException: ODI-10147: Repository type mismatches.
Could not get JDBC Connection; nested exception is java.sql.SQLException: Unable to start the Universal Connection Pool: oracle.ucp.UniversalConnectionPoolException: Invalid SQL-Query for validating the connection (+translated from german into english+) "
my ODI configuration on the server site (loged in as: odiw):
topology tab*:
Physical architecture:
Technology:
Definition:
Dataserver name = oracle_db_11gr2
User = odiw
JDBC-URL = jdbc:oracle:thin:@10.168.178.131:1521:orcl
Datasource:
Agent = OracleDIAgent
JNDI-Name = [DataSourceName]
Agents:
Definition:
Name = OracleDIAgent
Host = <IP of the server>
Port = 8001
Webapplicationcontext = oraclediagent
Datasources:
Dataserver = oracle_db_11gr2
JNDI-Name = [DataSourceName]
Logical architecture:
Technology:
Defintion:
Name = oracle_db_11gr2
Context = aMIS_dev
Physical schema = oracle_db_11gr2.ODIW
Agent:
Name = OracleDIAgent
Context = aMIS_dev
Physical agent = OracleDIAgent
when i test the connection of the data server (topology>physical architecture>technology>oracle>oracle_db_11gr2) with the OracleDIAgent i receive the
" ODI-26039: Connection failed.
oracle.odi.runtime.agent.invocation.InvocationException: javax.naming.NameNotFoundException: Unable to resolve '[DataSourceName]'. Resolved ''; remaining name '[DataSourceName]' "
since testing the connection on the server site failed in first place, i couldn't test the connection on the client site.

How to Configure ODI Console to Connect Multiple Master Repositories

Similar Messages

Maybe you are looking for