How to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

how to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

Hi ,
Have you got any additional public IP Address from your service provider , If yes on router you can have static route for those additional IP Address pointing to your ASA outside interface .
Accordingly you can configure NAT
HTH
Sandy .

Similar Messages

How to configure one Listener for 2 databases on the same server

Hello all,
Please, I am stuck as with my application server which requests the port 1521. I want to configure the repository to make use of the port 1521 which is also shared by another database on the server.
Regards,
Nadine

Maybe it is worth mentioning here that am installing it with two different users as to have two ORACLE_HOME independent of each other.
Below are the configuration files for the Listener.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = test.appstech.local)
(ORACLE_HOME = /d02/app/oracle/product/10.2.0/db_1)
(SID_NAME = test)
(SID_DESC =
(GLOBAL_DBNAME = testing.appstech.local)
(ORACLE_HOME = /d01/app/oracle/product/10.1.2/ora_infra)
(SID_NAME = testing)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ebs.appstech.local)(PORT = 1521))
TRACE_LEVEL_LISTENER = USER
TEST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.15.4)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = test.appstech.local)
TESTING =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.15.4)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = testing.appstech.local)
Regards,

How do I add Mountain Lion and still keep Snow Leopard for use on specific software

I currently am using OS 10.6.8 which supports Final Cut Studio version 7.5. I do not wish to change my Final Cut work, however I am now developing APPS and need the xcode tools which are only supported on OS 10.7 or higher. Can someone please direct me to any information on how I can set up my Macbook Pro to run both OS systems?

No, you buy & install Mountain Lion on a new partition, leaving the original alone. You will need to reboot from one to the other to use either version of the OS.
As you can see from this I still have Lion on my internal while I'm running Mountain Lion on an external drive - this may also be an option for you?

How to get the incoming filename and store it to sql table using biztalk server 2013

HI,
1)I need to get the incoming EDI filename which is received and save the filename in to the database.
2)How can i get the EDI Duplicate filename if i set the do not allow duplicate under validation tab in X12 agreement settings in biztalk admin console. In this case since the duplicate file will not come in to orchestration. In this case how
can i acheive this.
Thanks,
Vijayan
vijayan

For both cases, the filename can be found on the FILE.ReceivedFileName Context Property. You can access this Property in a Pipeline Component or Orchestration and take any action you want, such as apply to a database.
The value is accessed by: MyReceivedMessage(FILE.ReceivedFileName)
In the case of a duplicate EDI Interchange, you would use the Failed Message Routing feature to capture the error message with either an Orchestration or Send Port.

Can anyone offer some advice i am looking to upgrade the OS system on one of my macbook pro's, currently running os10.4.11, I would like to upgrade to OS10.5? how would I go about this, and is there a cost, for what is an old operating system now?

Can anyone offer some advice i am looking to upgrade the OS system on one of my macbook pro's, currently running os10.4.11, I would like to upgrade to OS10.5? how would I go about this, and is there a cost, for what is an old operating system now?

Since your Mac probably came with 10.4, there is no longer a way to get 10.5 Leopard install media. IF it has the requirements, you may be able to upgrade to 10.6 Snow Leopard by buying the boxed install media at the Apple Store for $30.
System requirements are found here: http://support.apple.com/kb/SP575
General support can be found here: http://www.apple.com/support/snowleopard/

How to configure one time customer

Dear Friends,
Please guide me how to configure one time custoemer in 6.0 version.
Regards,
Sreehari
Message was edited by:
Sreehari Kondapalli
Message was edited by:
Sreehari Kondapalli

Hi Prashant,
Can you please tell me the one time customer aslo requies the same settings what we do for regular customers in configuration or it requires some different settings.
Regards,
Sreehari

How to configure initial-context-factory and provider_url on Websphere MQ

I have a few questions about WebSphere MQ. Currently, my application is able work well with other JMS provider. But I would like to move to use WebSphere instead.
Can anyone suggest me how to configure the application connecting WebSphere?
�     I�m using the Initial java naming factory as bellows: com.sun.jndi.fscontext.RefFSContextFactoryIs it the correct class?
�     About the java-naming-factory-url, How do I know what object that I should use? I found this example in JMSAdmin.config � iiop://localhost:7555� What�s iiop ?
�     What jar file that I should add in my classpath?

Hi,
You have a few options...
1. Use WebSphere Application Server as the JNDI provider
2. Don't use JNDI
3. Use the File System Context as the JNDI provider
Exploring these options in a bit more detail...
1. Use WebSphere Application Server as the JNDI provider
Assuming you have WAS, the best way of obtaining your queue is to define the Queue and Queue Connection Factory objects in WAS using the admin console, then obtain them from the Initial Context as per the following article
http://publib.boulder.ibm.com/infocenter/wasinfo/v6r0/index.jsp?topic=/com.ibm.websphere.express.doc/info/exp/ae/rnam_example_prop2.html
If you prefer not to do JNDI lookups in your code a great alternative is to use Spring (www.springframework.org). If you haven't come across spring before it's well worth a look. One of it's many features is a bean factory for creating your objects. There is lots of support for retrieving JMS objects from JNDI, so in the main all you have to do is write some XML similar to the following...
<bean id="jndiTemplate" class="org.springframework.jndi.JndiTemplate">
       <property name="environment">
              <props>
                     <prop key="java.naming.factory.initial">${jndi.initialContextFactory}</prop>
                     <prop key="java.naming.provider.url">${jndi.providerUrl}</prop>
              </props>
       </property>
</bean>
<bean id="queueConnectionFactory" class="org.springframework.jndi.JndiObjectFactoryBean">
       <property name="jndiTemplate" ref="jndiTemplate"/>
       <property name="jndiName" value="${jndi.queueConnectionFactory}"/>
</bean>
<bean id="queueName" class="org.springframework.jndi.JndiObjectFactoryBean">
       <property name="jndiTemplate" ref="jndiTemplate"/>
       <property name="jndiName" value="${jndi.queueName}"/>
</bean>There's a bit more to it than this, but not much. I've been meaning to write a tutorial on this for a while so if you're interested let me know.
2. Don't use JNDI
This approach involves using the creating the native MQ Queue Connection Factory and Queue classes. You can hard code this, but it's much better to abstract it from your application. Again you can use Spring. The definition would look something like the following...
<bean id="MQJMS_TP_CLIENT_MQ_TCPIP"
class="org.springframework.beans.factory.config.FieldRetrievingFactoryBean">
       <property name="staticField">
              <value>com.ibm.mq.jms.JMSC.MQJMS_TP_CLIENT_MQ_TCPIP</value>
       </property>
</bean>
<bean id="queueConnectionFactory" class="com.ibm.mq.jms.MQQueueConnectionFactory">
       <property name="transportType" ref="MQJMS_TP_CLIENT_MQ_TCPIP" />
       <property name="queueManager" value="${mq.queueManager}" />
       <property name="hostName" value="${mq.host}" />
       <property name="port" value="${mq.port}" />
       <property name="channel" value="${mq.channel}" />
</bean>
<bean id="publishInvoiceQ" class="com.ibm.mq.jms.MQQueue">
       <constructor-arg value="${mq.queueName}" />
</bean>
3. Use the File System Context
The file system context is just like a JNDI context, but instead of using a url like iiop://host:port you have to specify a file system url. Because FSContext is just another JNDI context you can still use the spring configuration from option 1, but just change the relevant parameters.
In order to define you queues and queue connection factory using the File System Context, you need to download a swing application called JMS Admin. Get it here
http://www-1.ibm.com/support/docview.wss?rs=171&uid=swg24004691&loc=en_US&cs=utf-8&lang=en
With regards your specific questions...
IIOP is just another communication protocol. If you want more details I'm sure typing "what is iiop" into google will provide plenty of hits.
I'll do my best to answer the remain two tomorrow - I wrote an application a few months ago which used the File System Context, but don't have the details to hand.

How to create one checksum for 264 vis

Hi,
How to create "one Checksum" for 264 Vis.These 264 Vis are Interlinked if i change code for any .vi the checksum Should be update.This checksum is shown on the main window.
Regards
Ravindranath
Solved!
Go to Solution.

Here's a slightly simplified version (saved in 8.6). There's no need for the Get/Set File Position. The file position is already being incremented with the read.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Multiple File MD5 Checksum (Version 8.6).vi ‏23 KB

How to configure SingleSignOn between GRC and BOBJ 4.1

How to configure SingleSignOn between GRC and BOBJ 4.1?
We have configured the System entitlement in BOBJ CMC. But didn't do anything on the GRC system.
User can login from BOBJ to GRC with password but not with SSO.
We haven't configured SNC . I don't this for this simple flow, we need to have SNC.
We haven't set up the Trust certificate exchange as well between BOBJ and GRC.
Please help us to know what are the mandatory settings need to be done to create a Relational connection for a ERP/GRC system from BOBJ client tool IDT?
thanks,
Tilak

How to configure SingleSignOn between GRC and BOBJ 4.1?
We have configured the System entitlement in BOBJ CMC. But didn't do anything on the GRC system.
User can login from BOBJ to GRC with password but not with SSO.
We haven't configured SNC . I don't this for this simple flow, we need to have SNC.
We haven't set up the Trust certificate exchange as well between BOBJ and GRC.
Please help us to know what are the mandatory settings need to be done to create a Relational connection for a ERP/GRC system from BOBJ client tool IDT?
thanks,
Tilak

How to create one TO for multiple TRs

Dear All,
how to create one TO for multiple TRs, kindly suggest me
Regards,
balu

As for your question: it is discussed in sAP online help:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f841f24afa11d182b90000e829fbfe/frameset.htm
Sorry I misunderstood your question.
The above mentioned solution won't create one single TO from multiple TR.
Edited by: Csaba Szommer on Aug 11, 2010 9:46 AM

How do I cut and paste sets of lines for use in various Math questions?

How do I cut and paste sets of lines for use in various Math questions?

Thank you for your reply. My problem is much simpler than you are thinking. As a teacher I prepare sheets with random number generators.
EG. 256 + 389= ______    or         467
                                             - 384
       469 + 753= ______
or 5)750
On a PC I was able to start a page of A4 with one set and then drag and drop down and across the page.
On my Macbook I can get the numbers in but the lines do not copy. I asked at one of my One to One sessions and it had my 'trainer' stumped. He said he would make enquiries but so far no news. I am using Numbers.
I hope I have explained my 'problem' satisfactorily.

Can some one explain me on Exchange server / CAL licesing & where I can find current cost information?

Can some one explain me on Exchange server / CAL licesing & where I can find current cost information?

Hi,
As far as I know, every user need a license to use Exchange server and we can choose User CAL or Device CAL.
For more information about license, you can refer to the following articles:
Licensing Basics: What are CALs (Client Access Licenses):
http://blogs.msdn.com/b/mssmallbiz/archive/2007/11/06/5942350.aspx
Exchange Server 2013 licensing:
http://office.microsoft.com/en-001/exchange/microsoft-exchange-server-licensing-licensing-overview-FX103746915.aspx
Exchange Licensing FAQ:
http://office.microsoft.com/en-001/exchange/microsoft-exchange-licensing-faq-email-for-business-FX103934581.aspx
For the cost issue, I recommend you call Microsoft Licensing for useful information. And they will be able to give you an estimate based on your requirement.
http://www.microsoft.com/licensing/
If you have any question, please feel free to let me know.
Best regards,
Angela Shi
TechNet Community Support

I am losing network connection and a message"another devise is using you IP address

I am losing network connection and get amessage "another devise is using your computers IP adress"

http://osxdaily.com/2010/09/19/another-device-on-the-network-is-using-your-compu ters-ip-address/

How do I sync from ical and address book to office for mac 2011

How do I sync from ical and address book to office for mac 2011 in outlook? icloud is turned on, sync is turned on in outlook and in itunes. Email working fine in outlook, but no contact or calendar information. Microsoft said it is an Apple issue. They said icloud is not compatible with Outlook. I have OS Lion if you need to know that.

See Here
https://discussions.apple.com/message/16982951#16982951

How do I save the width and height of a photo for repeated use?

How do I save the width and height of a picture for repeated use, rather than having to enter it each time in the 'new file' box?
Thanks, Ed Jackson.

It could be that I'm older and have forgotten. I'm now 73 and will admit I have forgotten many things over the years. I have been using Photoshop since Photoshop version 3. And can not really recall which features or changes were made in ever version of Photoshop I have installed. Adobe has added many features over the years. The number of bugs introduce has also greatly increased after CS3. "New Doc Sizes.psp" in your user id preferences is edited using the two buttons in the new document dialog.
As for guide lines in new documents Photoshop CS6 or CC seem to add some for video file presets with guide lines. I do not know how to edit or add guide line to new doc presets. Guide line actions are easy to create. I have also seem some guideline in new documents when I did not expect any perhaps a new bug. Photoshop like most software has bugs. If you do not see Adobe new presets perhaps you copied an old "New Doc Sizes.psp" over Adobe's newer default file or Adobe migrared you presets and wand wiped their presets out. There are bugs. Close Photoshop down and rename your current "New Doc Sizes.psp" in you user id Photoshop cc preferences folder and start Photoshop it will add a dedault "New Doc Sizes.psp" file see if you see Adobe new presets in the new doc pull down when you select video and film...

How to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

Similar Messages

Maybe you are looking for