HOW TO CONFIGURE ONLY THREE IDE DEVICES ON 945P NEO

HELLO EVERYBODY AND AFTER A LOT OF EXPERIMENTATION I FINALLY ENDED UP TO THIS FORUM FOR YOUR HELP AND KNOWLEGDE.
SO!
FIRST OF ALL I CAN SAY THAT I'M USING 2 IDE HDD WITH UDMA MODE 5 --> OK!
AND 1 IDE DVD-R THAT HAS A PROBLEM WITH CONFIGURATION!! --> IT READS CDS & DVDS BUT CAN'T BURN THEM AT ALL (ALWAYS RESET OCCURS USING NERO) [NO PROBLEM WITH DRIVE OR USED MEDIA = STANDARD CHECKED]
THE M/B HAS A NORTHBRIDGE FROM INTEL AND A SOUTHBRIDGE FROM VIA (VT6410 TO BE EXACT)
SO MY PROBLEM IS WHAT BIOS CONFIGURATION SHOULD I USE TO ENABLE THE DVD-R AND START BURNING??
BECAUSE THE DVD-R IS RECOGNIZED AS "SCSI" FROM WINDOWS AND NOT "IDE" AS IT SHOULD BE!
I TRIED TO SETUP:
VT6410 TO RAID MODE AND DISABLE SATA --> NO LUCK
VT6410 TO IDE MODE AND DISABLE SATA --> NO LUCK
WHAT SHOULD I DO TO MAKE IT WORK?
ANY WHO KNOWS? OR HAD THE SAME PROBLEM?OR ANY SUGGESTIONS?
THANKS IN ADVANCE!
BYE!
PS: SATA ISN'T USED AT ALL

1) Wrong Section but no worries, I'll help you to move to the correct one.
2) All caps wordings hurts my eyes. I can't help much as the CapsLock Key is on your keyboard .
3) Try to swap the IDE drives among the controllers.

Similar Messages

MOVED: HOW TO CONFIGURE ONLY THREE IDE DEVICES ON 945P NEO

This topic has been moved to Intel P4 & Celeron P4 based board.
https://forum-en.msi.com/index.php?topic=100703.0

1) Wrong Section but no worries, I'll help you to move to the correct one.
2) All caps wordings hurts my eyes. I can't help much as the CapsLock Key is on your keyboard .
3) Try to swap the IDE drives among the controllers.

How to configure LOCA (o/p Device)

Hi Freinds,
Whenever i execute T code SPAD and press F4 in output device it show only one o/p device. But we want to configure LOCA o/p device. Can you help me how to configure it.
Thanks,
Rd,
Sachin

Hi,
I think we cant do direclty from Smartform output to Binary
we can do one thing
1) [smartform output to PDF|convert smartform output into pdf]
2) [PDF to Binary.|Re: how to convert pdf to binary]
hope it helps you.
Regards!

HT5622 How do I put three Apple devices on one Apple id?

I have two iPhone 4 devices and an iPad 4 device. Only one iPhone 4 has ever had it's IOS updated. I'm using an HP laptop running windows-7 64-bit. I've seen online something about hold down the shift key. Do I do this when clicking the icon on my desktop? Or when I enter my password? How long do I hold it down, till a new screen opens? I haven't had too much luck. I recently tried attaching the second iPhone 4 to USB and iTunes renamed her phone to what my phone is named. I'm green at this, I'll need some step by step help (sorry). Thanks, bwalla57

If you've updated your existing account and the update hasn't copied over to the iPad then try logging out of it on the iPad by tapping on the id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log back in and see if that 'refreshes' the account on the iPad.
Similarly if you just want to log in with a different account, though all downloads remain tied to the account that downloaded it - and using an account with iTunes Match, automatic downloads or redownloading past purchases could tie the iPad to that account for 90 days : http://support.apple.com/kb/HT4627

Need Help on IDE devices installation

Hi all....
Consider this... I am an idiot in PC self assemble...(or at least I am newbie... )
I done a DIY 2 times before... but are and kindengarden level.
I just bought a second hand 875P Neo-FIS2R(with RAID) and don't really know how to start with the IDE devices, others parts are OK for me.
Here what I have
TDK DVD+/- RW writer
TDK CDRW Combo
40GB ATA HDD for OS and application installation
80GB ATA HDD for DATA storage
120GB SATA HDD for Games
I know the simple way of doing it..... install the 2 optical drive in IDE-2 connector, 2 ATA HDD in IDE-1 Connector and SATA into SATA without RAID
But I been told that to optimise both the Optical rewritable... better to put them alone in each of the IDE connector. thats mean 2 IDE used up. And I been told that first IDE HDD should be in First IDE Master. Soo... if this the case, how should I proccee with the installation???
1. Can 1 of my optical rewritable device install in the IDE3????? and the other on IDE2
2 or should i buy 1 extra 40GB same brand and model IDE HDD and install with the 1 that I have currently at IDE3 and run on RAID 0 for better performance???? and the ATA 80GB HDD just get a SATA convertor and put it in the SATA connector????
3. or shloud I have my ATA 80GB HDD throw away and get 1 more SATA 120GB in promise raid run as RAID 0, 2 ATA 40GB in IDE3 run as RAID 0?????
Any possible advise will be welcome... Please help me out... Thanks

Thanks for the reply
The reason I'm using a second CDRW-Combo is due to the DVD writer that i have is an older version.... which is damn slow when writing to CD-RW media.... CD-R writing speed still acceptable. But I use RW more often.
OK.... I have another question to ask
What if I have two 40GB HDD but in differ brand.... actually... the size are differ as well. 1 Seagate Barracuda 7200.7 40GB Ultra-ATA (model: ST340014A) and 1 IBM Deskstar 41GB ATA-100 (model: IC35L040AVER07). these 2 HDD have a jumper option of forcing it to limit as 32GB. If I use both of this HDD in 32GB mode. can I still enjoy the RAID0 performance like other? or it will downgrade my seagate HDD to the performance like the IBM Deskstar HDD???
1 more question. How many channel(volume) can Promise PDC20378 handle?? 1 or more?? can I have my IDE3 in channel(Volume) 1, and SATA in another???
I tried to fing the info of PDC20378 in the net, even promise website but can't find anything.
And again.... thanks for the help.

How to configure AAA

Hi,
I have some question regarding AAA..
1)which one is the best?
a) TACACS+
b) RADIUS
2)How to configure AAA in network devices?
3)How to configure RADIUS/TACACS+ in ACS?
Please guide in this smatter?
Thanx
som

Hi Som,
It's not possible to answer your questions in one post.
You will find the answers to your questions under the following urls:
AAA:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_aaa_overview_ps6350_TSD_Products_Configuration_Guide_Chapter.html
RADIUS:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_cfg_radius_ps6350_TSD_Products_Configuration_Guide_Chapter.html
TACACS+:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_cfg_tacacs+_ps6350_TSD_Products_Configuration_Guide_Chapter.html
ACS 4.2:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/configuration/guide/acs42_config_guide.html
Cheers:
Istvan

Configure only GL Balance and GL other Job

Hi All,
We are planning to implement real time solution for OBIEE. We have identified 2 fact table W_GL_BALANCE_F and W_GL_OTHER_F as of now.
In real time implementation, the job will run every 30 minutes to load data from the source. Data loaded into EBS in last 30 minutes will be extracted and loaded. There are 2 possible ways we can achive this.
1. Write a code (same as in OBIA) for these 2 tables to extract and load data into this 2 tables.
2. Use only "Financial General Ledger" Subject Area and configure DAC, so that it load data only onto these 2 tables.
Since i am new to OBIA, can someone help me to understand how to configure only those job, which are relevant for W_GL_BALANCE_F and W_GL_OTHER_F tables? So that every 30 mins, we run only one execution plan.

Please check the link [Reconciliation ABST2 & GL|Re: ABST2- FI-AA reconciliation posting;
It might help you.
Regards,
Sridevi

I am trying to save a doc. to a external hard drive and it wont allow me. I says its read only, any ideas on how to correct it?

I am trying to save a doc. to a external hard drive and it wont allow me. I says its read only, any ideas on how to correct it?

Save it on the internal HD then copy it from this safe location to the external device.
iWork applications can't apply their save process on devices which aren't formatted as HFS+.
But it may also be that for some reason, an external device formatted as HFS+ is set to Read Only.
If it's this case, you will have to change de setting before moving the file on it.
Yvan KOENIG (VALLAURIS, France) vendredi 20 mai 2011 11:01:05
Please :
Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How to configure users for internal mail routing only in exchange 2013

Hi Guys!
I have a scenario here that i have three (3) group of users, one group is able to have an inbound and outbound mail, meaning they can send and recieved emails from internal and external.The second group of users should have inbound mail(local mail) only
(cannot send and recieved mails from internet), and the third (3) user is they can recieved an outbound mail but they are not allowed to send mail directly to the client,(Ex.
[email protected],[email protected],[email protected]) instead they will use the
[email protected] as the reply to the client. Please let me know how to configure group user 2 and 3.
Thank you.
regards,
Paul

Hi Paul,
Great advice from Maganti, just elaborating steps:
Prevent Group 2 send e-mail to internet by transport rule:
1. Login EAC with administrator, Mail Flow---> Rule, click “Create a new rule, then give a name “Group2 - No Internet Mail”.
2. Conditions: select "From a member of a distribution list" & select group "Group2"
3. Select another condition "Sent to users inside or outside the organization" & Select Outside.
4. Actions: select "send bounce message to sender with enhanced status code" & write your custom message like “You are not authorized to send mails to internet”.
Prevent Group 3 directly send e-mail to internet, however it can send message as group:
We also can create a transport rule which is same with Group2, then open Active Directory Users and Computers to add send as permission with another group (contain same users as group3).
Best Regards,
Allen Wang

I would appreciate your help on how to configure a gmail in a way it ask for the password everytime I connect?. In the only way I can configure it I have to include the pw when configuring the account and after that it do not ask for pw

I would appreciate your help on how to configure a gmail in a way it ask for the password everytime I connect?. In the only way I can configure it I have to include the pw when configuring the account and after that it do not ask for pw so everyone that shares my iPad can oppen my mail with no pw required.
Thank

The iPad is designed to be a single user device, and there is currently no way to password protect the Mail app - even removing the account password from Settings > Mail, Contacts, Calendars will just prevent new mail being downloaded, it won't hide those that have already been downloaded. There is this work-around for the app : https://discussions.apple.com/message/13127632#13127632 . Also there might be third-party email apps that feature password protecting.

How to configure users for internal mail routing only

Hi Guys!
I have a scenario here that i have three (3) group of users, one group is able to have an inbound and outbound mail, meaning they can send and recieved emails from internal and external.The second group of users should have inbound mail(local mail) only (cannot send and recieved mails from internet), and the third (3) user is they can recieved an outbound mail but they are not allowed to send mail directly to the client,(Ex. [email protected],[email protected],[email protected]) instead they will use the [email protected] as the reply to the client. Please let me know how to configure group user 2 and 3.
Thank you.
regards,
LRMCP

Hi LRMCP,
Procedure is perfect which is given by Benoit, just elaborating steps.
Prevent form Sending Mails:
Create a transport rule on Hub Transport Server:
Organization Configuration -> Hub Transport -> Transport Rules -> New Transport Rule -> Give Name “Group2 - No Internet Mail”
Conditions: select "From a member of a distribution list" & select group "Group2"
Select another condition "Sent to users inside or outside the organization" & Select Outside.
Actions: select "send bounce message to sender with enhanced status code" & write your custom message like “You are not authorized to send mails to internet”
Prevent from Receiving Mails:
New User: You can select “require that senders are authenticated” while creating new users which will stop receiving mails from internet.
User -> properties -> Mail Flow Settings -> Message Delivery Restrictions -> Properties -> set Sender Authentication.
For Existing Users:
You have already a group named "Group2" so set sender authentication for all members with this single command.
Get-DistributionGroup "Group2" | Set-Mailbox -RequireSenderAuthenticationEnabled $true
Same procedure mentioned for group2 can be followed for Group3 to prevent from sending mails.
Amit Tank || MVP - Exchange || MCITP - Exchange 2007 || http://ExchangeShare.WordPress.com

HT4528 my I phone just went completely dead...it had a pretty full charge....what happened and how do I fix it. it is only three months old.

My I Phone 5 just went completely dead....it had a pretty full charge..
What happened and how do I fix it? It is only three months old

Restart device: Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).

HT5622 I own three Apple devices, but my iPad remained associated with my old email address and password. How can I register it with the same new email and password?

I own three Apple devices, but my iPad remained associated with my old email address and password. How can I register it with the same new email and password?

If you updated your existing account then try logging out of it on the iPad by tapping on the id in Settings > Store and then log back in and see if that 'refreshes' the account on the iPad. If you created a new account then any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can download updates to its apps.

How to configure a map of patches names of my midi device in order to insert program changes from Logic?

How to configure a map of patches names of my midi device in order to insert program changes from Logic?

Thomjinx wrote:
You can usually use a patch editor-librarian program like Sound Diver or MidiQuest to copy and paste the patch names (one bank at a time) into the patch name list of a multi-intsrument object in the environment.
That's what I do. Works like a charm.
Cheer,
Thomjinx
"My first copy of Logic came on Floppy disks"
And you will need to setup bank change commands for your particular instrument, if it does in fact have several banks of internal patches. Logic comes with a selection of bank change commands, one of them will almost always work.
My first copy of Logic came on floppies, two of them I think and was MIDI only, moved up to Logic_Audio at version 3.0 I think.

I have one apple ID for both my Iphone 4S and Ipad. My Ipad was stolen from me and when I checked the iCloud, it can only locate the Iphone 4S. How can I locate the Ipad device?

I have one apple ID for both my Iphone 4S and Ipad. My Ipad was stolen from me and when I checked the iCloud, it can only locate the Iphone 4S. How can I locate the Ipad device?

Welcome to the Apple Community.
You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

HOW TO CONFIGURE ONLY THREE IDE DEVICES ON 945P NEO

Similar Messages

Maybe you are looking for