How to configure port mirroring in hyper-v

As the title ,anyone knows ?

Hi Jacky,
Hope following link is useful:
http://www.ms4u.info/2013/05/port-mirroring-on-windows-server-2012.htm
(In the source vm settings go to Network Adapter --> Advanced Features --> On Port Mirroring, set as Source mode. Do the same steps in the target VM and set as destination mode )
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Configuring port mirroring on the MA561x to capture voice packets?

    How to configure port mirroring on the MA561x to capture voice packets? Now I use the MA5616. Any help would be appreciated!

    How to configure port mirroring on the MA561x to capture voice packets? Now I use the MA5616. Any help would be appreciated!
     I use the MA5616,too,and I bought from  www.huanetwork.com
    , nice price. The configuration of this problem, please visit:  http://momopp.blogdetik.com/

  • How to configure port to connect switch SG300 to 3com switch

    Hello,
    I need help. I have my network with severals SG300 switches.
    I have one of them like my core switch working in layer 3 mode. With 2 vlans and vlan interfaces to each vlan.
    Everything is working ok.
    But now i have to connect one 3com unmanage switch that have host from vlan 1 and 2. How should i connect this switch to my Cisco sg300 switch? What mode should i use in that port?
    thanks a lot.
    SG300 L3 Switch
             I
             I
    SG300 L2 switch
             I
             I<-------- How should i configure this connection to support all vlans.
             I
    3com unmanage switch
             I          I
             I          I
             I        vlan 1
         vlan2

    Use MAC-based VLANs on SG300 L2 switch, register all clients in needed VLANs (or better setup SG300 L2 port to 3com in PVID VLAN with maximum clients and others in MAC-based VLANs).

  • How to configure port in oracle

    dear all
    i want to install oracle database 10g and application server 10.1.2.0.2 on same machine .but while doing so i am getign error that already listener port is used by another object .so how and what should i do as i want to install bothe oracle database and application server 10.1.2.0.2 .
    please help
    thanks in advance
    Munir

    thanks for quick reply .actually i m telling the details
    i have oracle 10g R2 and Developer suit 10g installed on my machine .i was installing application server 10.1.2.0.2 on the same machine in diferent home . but while i'm installing the app srver it gives the error that already listener port is used ,use different port or stoped it first before procedding .......
    as oracle listener use 1521 port by default . is it possible to change the oracle database default port 1521 to another port ?
    regards
    Munir

  • SG 300-28: port mirroring: the destination host looses network connectivity

    Hi,
    we have two SG 300-28. On one of them i configured port mirroring because one host behaves strangely. When i create the mirror, the host connected to the destination port is not accesible any longer, e.g. he does not answer to a ping. The packets from the source port appears on the destination port, but no packet intended for the host itself. Is this behaviour right ? I accepted that the host on the destination port is still accessible as it would be without the mirror.
    Bernd

    He Bernd,
    Yes. This behaviour is right. That's how Port Mirroring works. The host connected to the Destination port loses its connectivity and it can only act as a monitoring device using softwares like WireShark (and monitor packets coming to and from the Source port(s)). All configurations on the destination port are overridden.
    Let me know if you need further help,
    HTH,
    Vijay
    Please rate useful posts

  • Port mirroring

    I want to configure port mirroring on SG300 swtich
    Source Port  gi10
    Destination port gi1
    You can see my configuration from the attached jpg file.
    Problem is port monitoring status is "Not Ready" , and i can not monitor the source interface!

    Hi Egemen,
    I have the same thing happenning on my SG300-10P, see screen capture below.
    Then I plugged some devices into ports G8 and G9.
    It was noted that the  status changed to the following,  see screen capture below.
    Check your link state on the front of the switch or use to GUI to look at the port states.  If one of those two ports does not have link,  the switch will report "not ready."
    You may find additional useful information under status and statistics> view  log >ram memory can give you details about what is happening with port states, so check your error log.
    ( note: logging may have to be enabled via Administration >log settings )
    regards dave

  • What are some of the best iOS apps can remotely played videos, audios, photos and text files from a NAS hdd connected to Airport Extreme USB port? And how to configure this setup?

    I have already set up NAS hdd as connecting it at USB port of Airport Extreme, i also want to remotely access it from iPhone, so what's the next step? What are some of the best iOS apps can remotely played videos, audios, photos and text files from the NAS hdd and how to configure this setup?

    *Edit - I am not able to connect to the NAS when hardwired to the airport extreme.

  • How to Configure SMTP Port in ODI

    Hi,
    Someone know how to configure SMTP port in the ODI tool? I tried changing the port number in the odiparams but I still encountered an error:"Could not connect to SMTP host." when executing the odisendmail package object though I can access the SMTP Server thru tracetcp.
    TIA,
    Cathy

    950484 wrote:
    Hi Bhabani,
    Thanks for the quick response :) . I saw your post and its a nice approach in sending mail instead of using an odi package object odisendmail. However, the requirement is not to use the gmail credentials but to use the credentials provided to us. But I noticed that the port used for the SMTP server is not the default port number which is 25. So I am guessing that the reason why I cannot connect to the SMTP host is because of the port number. Do you know how to solve this?If you want to change the SMTP port then do the following
    edit smtplib.py located at <ODI_HOME>/oracledi/lib/scripting/LIB
    change SMTP_PORT to what ever port you want .
    restart ODI
    execute your mail sending program

  • How to configure FXO and FXS port?

    hi,
    can anyone help me on how to configure FXO port on 2820 router and FXS port on 2810.
    What are the things i need to configure to make a voip network that connect to PSTN network and PBX?

    hi
    do refer this link which can provide you fair idea to get started with your configs.
    http://www.cisco.com/en/US/partner/tech/tk1077/tech_configuration_examples_list.html
    regds

  • How to configure a parallel printer to a USB port?

    Hi people....I'm trying to set up our old, trusty Laserjet 5P with our new G70 using a USB to parallel cable, but to no avail. Any ideas on how to configure this odd couple so that they can live and work in harmony? My wife would rather lose me than have to give up her printer. 
    This question was solved.
    View Solution.

    In addition to the printer driver shich you have installed you may also need a driver for the USB to parallel converter.  The other thing I would check would be the port settings, the converter may provide an emulated LPT1: port, but it may be a different port.  Make sure you are using the correct port.
    Regards,
    Bob Headrick, Microsoft MVP Printing/Imaging
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Pa-mc-8te1 can i use this a ethernet POrt how to configure it ...

    pa-mc-8te1 can i use this a ethernet POrt how to configure it ...

    Hi Venkat,
    Please ask this question in routing/switching forum. As far as i know you can only configure pa-mc-8te1 as E1 or T1 ports. For more details please visit the below link.
    http://www.cisco.com/c/en/us/td/docs/interfaces_modules/port_adapters/install_upgrade/multichannel_serial/8-port_multichannel_t1-ei_8pri_install_config/8port_t1/2738ovr.html
    Regards,
    Kanwal
    Note: Please mark answers if they are helpful

  • Hyper-V WMI Provider - Searching and Setting Port Mirroring

    Is there any way to search for VMs with Port Mirroring disabled through WMI provider?? I'm working on a little application to set port mirroring to destination but I can't find anything in WMI Provider API. I know this can be achieved using PowerShell
    cmdlets but I would rather use WMI and C# if possible. Thanks.

    Hi PerlFanatic ,
    Please refer to following command :
    Get-WmiObject -Namespace root\virtualization\v2 -Class msvm_ethernetswitchportsecuritysetting
    data
    Best Regards
    Elton JI
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to add tape drive in hyper V operating system

    how to add tape drive in hyper V operating system
    tape drive may be to scsci or USB port.
    how to add pls suggest

    how to add tape drive in hyper V operating system
    tape drive may be to scsci or USB port.
    how to add pls suggest
    You need something like StarWind Tape Redirector that "iSCSI-izes" hardware attached to host. So you'll be able to connect with iSCSI initiator from inside a VM running on this host, some other host or even other physical machine (as long as it
    has iSCSI connectivity), see:
    StarWind Tape Redirector
    http://www.starwindsoftware.com/download-starwind-tape-redirector
    So at the end of the day you'll have something like on the picture below:
    Good news: this software offering is 100% free so you don't need to pay anything to anybody :)
    Hope this helped!
    StarWind Virtual SAN clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

  • Why does my sg 200 keeps changing port mirror destination to g1

    On my sg 200-8 I have 1 port mirror session, with destination set to g4. If I disable, then enable, it changes the port to g1 and g4 is not among the ones I can choose. How do I re-enable it, without having to delete it and create a new one. And why does it keep changing it to g1?

    Thanks Thomas. I think I was looking at it wrong regarding the SG switch saying that access mode ports do not tag traffic. It looks like it's from the viewpoint of how the ingress traffic looks. So, a port in access mode assumes that traffic coming in is untagged. Once that traffic ingresses into the port it is then tagged with the VLAN specified for that port. Does this sound right? It's just confusing how the SG switches describe the access mode ports as the PVID being untagged, when it actually is being tagged after data ingresses into the port.
    By the way, the layer 3 device is an ASA 5510, which is also performing DHCP for the VLAN.
    As you mentioned, I think my core issue is the upstream trunking configuration, which I'm looking into.
    Thanks for your help,
    Logan

  • ASR1001 Port Mirroring

    Hi
    anyone can help me how to do the port mirroring on ASR1001 router?

    Hi Zeeshanraza,
    From this Cisco documentation: Configuring ERSPAN
    "The monitor session span-session-number type local command is not supported on Cisco ASR 1000 Series Routers."
    Alternatively you can try using ERSPAN as Local SPAN
    Example: Configuring an ERSPAN as a Local SPAN
    The following example shows how to configure an ERSPAN as a local SPAN.
    monitor session 10 type erspan-source
    source interface GigabitEthernet0/0/0
    destination
    erspan-id 10
    ip address 10.10.10.1
    origin ip address 10.10.10.1
    monitor session 20 type erspan-destination
    destination interface GigabitEthernet0/0/1
    source
    erspan-id 10
    ip address 10.10.0.1
    Regards,
    Hendro

Maybe you are looking for

  • Help! Trying to add bridge photo gallery to web page in CS4

    I am new to this and have created a photogallery in bridge.  I uploaded the files to my server and they don't appear anywhere.  How do I save them and then add to the page using dreamweaver cs4?   All of the tutorials I find show how to create them n

  • Dreamweaver and DNS issue

    Ok folks. I am looking for some major help with what seems like it would be a simple solution. But it has proved to be a very difficult one. Here is the story- I have a website. I use dreamweaver to upload (FTP) everything. My host recently did some

  • Emergency Responder

    Is there a way to include the ERL in the phone onsite alert? Currently it only gives the phone number, but with multiple floors the building security desk would not know what floor the phone number is associated with.

  • MacBook Pro won't sleep since upgrade

    Since upgrading to Lion, my MacBook Pro does not go to sleep if left idle. It sleeps fine if I force it to, or close the lid. I read somewhere that the latest (10.4) iTunes causes this, but I have shut that down Any ideas?

  • Time to get my hands dirty?

    Hi all Digital Publishers I have been working with InDesign (basic layout and typesetting) for print for a few years now (freelance, part-time)! The stuff I have been doing is for school textbooks. It is now obvious that iPads, Kindles, laptops etc.