How to configure printers in SUSI LINUX

Hi all!
At present we are using WINDOWS OS.Now we are shifting to SUSI LINUX.What are the settings to be made in OS as well as in SAP.Our present version is SAPGUI 7.00 rev6.Already we have installed 5 printers in SUSI LINUX OS.When we trying to pring SAP documents, we are getting error .How to add printers in Front end in SUSI LINUX for SAP?Please give step by step procedure.Thanks in advance.
Edited by: Jayasri P. on Apr 1, 2008 7:09 AM

Hi,
Printer is installed on which OS linux or windows ?
check following note
Note 821519 - Front-end printing with control technology
Note 504952 - Composite note regarding spooling and printing
also check following if printer is installed on linux
Re: linux_sap_printing
regards,
kaushal

Similar Messages

How to install j2sdk into Suse Linux

How to install the j2sdk-1_4_0_03-linux-i586.bin into Suse Linux 8.1

I done it like this:
user@linux:~> chmod a+x j2sdk-1_4_0_03-linux-i586-rpm.bin
user@linux:~> ./j2sdk-1_4_0_03-linux-i586-rpm.bin
accept licence
user@linux:~> rpm -iv j2sdk-1_4_0_03-fcs-linux-i586.rpm
so its installed but not linked
i install the sdk1.3.x from my suse cd so it create a java2.conf file in /etc/java/
and change it to:
# Configuration for java2 package
Priority: 60
Vendor : Sun
Version : 1.4.0
Devel : True
JAVA_BINDIR = /usr/java/j2sdk1.4.0_03/bin
JAVA_ROOT = /usr/java/j2sdk1.4.0_03
JAVA_HOME = /usr/java/j2sdk1.4.0_03
JRE_HOME = /usr/java/j2sdk1.4.0_03/jre
JDK_HOME = /usr/java/j2sdk1.4.0_03
SDK_HOME = /usr/java/j2sdk1.4.0_03
JAVA_LINK = j2sdk1.4.0_03
be sure that CREATE_JAVALINK in sysconfig is set to yes
else edit it in yast->system->Editor /etc/sysconfig
after that i uninstall jre1.3.x and sdk1.3.x
and it works
good luck

How to configure serverStats to monitor linux machines

Hi,
Please let me know what i need to configure on my linux servers in order to be able to monitor the resources when i will run a load test.
From where to begin? I see that i have the Manage Tab and also the ServerStats in Oracle Load Test?
I installed Oracle Application Testing Suite on my windows machine. I have installed on this machine all the components : Data Collector and Agent Manager. From this machine I want to monitor my linux servers and I'm not able to add them as Monitors. Please let me know what I need to install on the linux servers and how to add this servers as Monitors. The 2 servers are WebLogic servers.
Do I need to configure SNMP on servers?
Please send my an answer.
Thanks a lot!

Hi,
Pls look at the below link
[http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm|http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm]
[Monitoring your SAP NetWeaver Components|Monitoring your SAP NetWeaver Components]
Thx,
waseem

How to configure Node manager on Linux on ssl port

Hi,
I have installed SOA BPM 11.1.1.3 on linux with ssl enabled. I am trying to configure Node Manager but it's not working.
Here are the steps I did to configure.
1. Created a machine
2. Added managed servers to the machine i.e. soa,bam
3. Enroll domain using nmEnroll using
cd $BEA_HOME/user_projects/domains/<domain_name>/bin/
. setDomainEnv.sh
java weblogic.WLST
wls> connect(’weblogic’,'weblogic1’, ‘t3://mymachine.mydomain:7001’)
wls> nmEnroll(’$BEA_HOME/user_projects/domains/<domain_name>’, ‘$BEA_HOME/wlserver_<version>/common/nodemanager’)
here 7001 is the admin server non-ssl port but when I try 7002 ssl port it doesn't connect. But I need to enroll it on ssl port as I have ssl enabled.
4. reset the node manager user/password same as weblogic console
5. started the node manager using $WL_HOME\server\bin\startNodeManager.sh
But when I log back into console and try to start my manage server it gives the following error
SEVERE: java.io.FileNotFoundException: /usr3/app/oracle/Middleware/user_projects/domains/wcbpm_domain/./config/jps-config.xml (No such file or directory)
<Aug 6, 2010 5:30:16 PM EDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The dynamic loading of the OPSS java security policy provider class oracle.security.jps.internal.policystore.JavaPolicyProvider failed due to problem inside OPSS java security policy provider. Exception was thrown when loading or setting the JPSS policy provider. Enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-01538: The default policy provider was not found.I did not add my Admin server to be part of the machine.
Any help if I am missing anything or doing anything wrong.
Thanks

Hi,
Do I need to add Admin Server also part of the Machine where I added bam,soa servers. I tried again following the steps but gets the below error again. Appreciate if someone can list the steps as the docs are a bit vague:
<Aug 6, 2010 6:14:01 PM> <INFO> <wcbpm_domain> <bam_server1> <Starting WebLogic server with command line: /usr3/app/oracle/Middleware/user_projects/domains/wcbpm_domain/bin/startWebLogic.sh >
Aug 6, 2010 6:14:01 PM weblogic.nodemanager.server.ServerManager log
INFO: Starting WebLogic server with command line: /usr3/app/oracle/Middleware/user_projects/domains/wcbpm_domain/bin/startWebLogic.sh
<Aug 6, 2010 6:14:01 PM> <INFO> <wcbpm_domain> <bam_server1> <Working directory is '/usr3/app/oracle/Middleware/user_projects/domains/wcbpm_domain'>
Aug 6, 2010 6:14:01 PM weblogic.nodemanager.server.ServerManager log
'/usr3/app/oracle/Middleware/user_projects/domains/wcbpm_domain/servers/bam_server1/logs/bam_server1.out'
<Aug 6, 2010 6:14:02 PM> <INFO> <wcbpm_domain> <bam_server1> <Server failed during startup so will not be restarted>
Aug 6, 2010 6:14:02 PM weblogic.nodemanager.server.ServerManager log
INFO: Server failed during startup so will not be restarted
<Aug 6, 2010 6:14:02 PM> <WARNING> <Exception while starting server 'bam_server1'>
java.io.IOException: Server failed to start up. See server output log for more details.
        at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
        at weblogic.nodemanager.server.Handler.handleStart(Handler.java:567)
        at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
        at weblogic.nodemanager.server.Handler.run(Handler.java:70)
        at java.lang.Thread.run(Thread.java:619)
[WARN ] Use of -Djrockit.optfile is deprecated and discouraged.
[WARN ] Use of -Djrockit.optfile is deprecated and discouraged.
Unknown option or illegal argument: -XX:+UseParallelGC.
Please check for incorrect spelling or review documentation of startup options.
Could not create the Java virtual machine.
<Aug 6, 2010 6:14:02 PM> <FINEST> <NodeManager> <Waiting for the process to die: 590>
<Aug 6, 2010 6:14:02 PM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>
<Aug 6, 2010 6:14:02 PM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>Don't know if I hve missed any steps in node manager configuration.
Thanks

How to install java under suse linux 8.0 prof

hi,
first of all, i'm a newbie.
i have downloaded the file j2re-1_4_0_01-linux-i586.bin into my public_html directory.
which comand do i have to use to install java??
please help!
best regards
Mad Elk

I found this on Sun's Site, it should help. If it is a bin file, you should just have to type whateverItIsCalled.bin and hit enter. Make sure it is in the directory you want to install it in!
Installation of Self-Extracting Binary
Use the following instructions if you want to use the self-extracting binary file to install the Java 2 SDK. If you want to install RPM packages instead, see Installation of RPM File.
1. Check the download file size.
Before you download a file, notice that its byte size is provided on the download page. Once the download has completed, check that you have downloaded the full, uncorrupted software file.
2. Copy j2sdk-1_3_1_<version number>-linux-i586.bin to the directory into which you want to install the Java 2 SDK.
3. Run j2sdk-1_3_1_<version number>-linux-i586.bin
Launch the executable file you downloaded, j2sdk-1_3_1_<version number>-linux-i586.bin, by using the following commands from the directory in which it is located:
chmod a+x j2sdk-1_3_1_<version number>-linux-i586.bin
./j2sdk-1_3_1_<version number>-linux-i586.bin
The script will display a binary license agreement, which you will be asked to agree to before installation can proceed. Once you have agreed to the license, the install script will install the Java 2 SDK in a directory named jdk1.3.1_<version number> in the current directory.
Note about root access - Unbundling the software automatically creates a directory called jdk1.3.1_<version number>. If you choose to install the Java 2 SDK into system-wide location such as /usr/local, you must first become root to gain the necessary permissions. If you do not have root access, simply install the Java 2 SDK into your home directory, or a subdirectory that you have permission to write to.
Note about overwriting files - If you unpack the software or documentation in a directory that contains a subdirectory named jdk1.3.1_<version number>, the new software will overwrite files of the same name in that jdk1.3.1_<version number> directory. Be careful to rename the old directory if it contains files you would like to keep.

Installing Oracle Database 10 G Release 2 on Centos 5.0 and SuSe Linux Prof

I have problem in installing Oracle Database 10 G Release 2 on Centos 5.0 and SuSe Linux Professional 9.1.
1. According to information of installation steps given by one user at DIZWELL for Centos 5.0.
In the last step it says as follows (I had bought a CD Centos 5.0) - It gives the following error. My copy of Centos is not a downloaded Zip file.
su - oracle
/osource/runinstaller -ignoreSysPrereqs
Command not found
I had also installed Libaio and Libxp as mentioned in the document given by a user. How can i solve this. I need the complete installation of Oracle 10 G Rel 2 on Centos 5.0.
2. Installation of Oracle 10 G Rel 2 on Novell SuSe Linux Professional 9.1.
I had seen the oui opening up and when it moves a little further it gives some memory error and It requires about 900 + memory. After installing this linux if we have increase the memory What should we do? According to the message it says my system is having only 700+ memory. I do not know whether it is MB/KB. Please given the complete steps to solve this.
Thanks in Advance!
Regards,
Srinivas

was trying to Oracle 10G Rel 2 on Centos 5.0 but There I never got the Oracle Universal Installer.
Now, I had made necessary to Novelll Suse Linux Professional 9.1, where I has made the necessary changes to the system files and installed the libXp, glibc, libaio, make etc and I was able to get Oracle Universal Installer. During Installation at the end I got these errors.
gcc-3.2 Found not found Failed
Overall Result of this check Failed
Kernel Parameters
Semopm=100 found semopm=32 Failed
file-max=65536 Found file-max=52249 Failed
Checking for VERSION-2.6.5-7.97 Found VERSION=2.6.4-52 - default Failed
ip_local_port_range=1024-65000 Found ip_local_port_range=32768-61000 Failed
Check for rmem_default=262144 Found rmem_default=111616 Failed
Check for rmem_max=262144 Found rmem_max-111616 Failed
Check for wmem_default=262144 Found wmem_default=111616 Failed
Check for wmem_max=262144 Found wmem_max=111616 Failed
Recommended glibc VERSION
Expected Atleast= 2.3.3-98.28
Actual = 2.3.3-97 Failed
Overall Result of the above Failed
Checking Physical Memory
Expected = 922 MB
Actual = 500 MB
Please let me know What to do or How to rectify this? Atleast I should be able to install the same in SuSe Linux Professional 9.1. Mine is not a zip file now . I have unzipped and stored my Oracle 10 G Rel 2 on a CD Which was working correctly in SuSe Linux Professional 9.1 but the last step in the Installation in Centos 5.0 did not show the OUI when I had run from the CD. Should I have to configure the Internet for lInux also. I have Broadband internet 256 kbps From hathway Internet. How can i configure Internet in SuSe Linux Professional 9.1, Centos 5.0 and Fedora Core 4. Where can I give my IP Address, Gateway, Primay DNS, Secondary DNS, Email ID and Password, Host Name etc
Somehow, I need to install Oracle 10 G Rel 2 on any one Linux Version for me to work and succeed.Anybody can Help me also.
AFTER RE-INSTALLING CENTOS LINUX 5.0 AGAIN, I HAD REPEATED ALL THE STEPS TAKEN FROM A MEMBER OF ORACLE FORUMS AND THIS TIME, WHEN I HAD GIVEN THE COMMANDS
su - oracle
/osource/runInstaller -ignoreSysPrereqs
THIS TIME IT HAD GIVEN THE ERROR AS FOLLOWS:
PERMISSION DENIED
PLEASE TELL ME WHAT SHOULD BE THE PROBLEM AND HOW TO RECTIFY THIS PROBLEM AND INSTALL ORACLE 10g REL 2 ON CENTOS 5.0 LINUX.
Thanks in Advance
Regards,
Srinivas

How to install oracle 10g on suse linux

Hi,
can anybody let me kbow how to install oracle 10.2 on suse linux.....
i have installed suse linux but couldn;t able to install oracle 10g on the same....
looking for gud suggestion.....

These two are good to start with
Installing Oracle Database 10g on SUSE Linux Enterprise Server 9 and on SUSE Linux Professional 9.1, 9.2, and 9.3
http://www.puschitz.com/InstallingOracle10gOnSUSE.shtml
Oracle Products on SUSE Linux Enterprise: Documents
http://www.novell.com/products/server/oracle/documents.html

Oracle10g How to configure HTTPS to access EM in Linux

I have installed Oracle10g on Linux Enterprise Server on XEON-based server.
I can run Oracle Enterprise Manager (EM) via
http://127.0.0.1:5500/em
Since EM will be unsafe to run on the Internet without SSL, does any one knows how to configure and enable Oracle10g to enable SSL access? Which port does it use?

1. Stop dbcosole
emctl stop dbconsole2. execute command (as following) and fill all questions
emctl secure dbconsole3. Start dbconsole
emctl start dbconsoleNow connect to https://<ip address>:5500/em
Since EM will be unsafe to run on the Internet without SSLIt's generally bad idea to "share" administration site over internet (unless you don't have some VPN tunnel), because if you have weak passwords for DB users then you are asking for problems.

How to configure DSN in linux?

hi everyone,
i had install tomcat in linux os, i wonder how to configure DSN in order to access in database, im' only know how to configure in MSWindows but not linux, could anybody help
thanks in advance

It would probably be better to post this question in the JDBC forum, but what database and driver are you using?

How to update firefox suse linux enterprise 10.3

I've recently installed Suse Linux Enterprise Server 10 sp3. It has firefox 3.5.2. I'd like to know how to update it to the latest version. I've downloaded and decompressed the firefox file but cannot install it (update the residetn version).
Thanks in advance

Look at my answer on this similar post
http://discussions.apple.com/thread.jspa?threadID=2347187&tstart=0
 Cheers, Tom

How to configurw n/w in SUSE Linux

Hi all,
i have to install oracle 10g on suse linux server, i have installed suse linux on m/c , iwant ot configure n/w in the same ,but i couldn't...
i have used yast but still couldn't able to configure the n/w

I got it working. I had to change the dbora file to look like this:
#! /bin/sh -x
# Change the value of ORACLE_HOME to specify the correct Oracle home
# directory for your installation.
ORACLE_HOME=/opt/oracle/product/11gR2/db
# Change the value of ORACLE to the login name of the
# oracle owner at your site.
ORACLE=oracle
PATH=${PATH}:$ORACLE_HOME/bin
export ORACLE_HOME PATH
touch /var/lock/subsys/dbora
case $1 in
'start')
        su - $ORACLE $ORACLE_HOME/bin/dbstart $ORACLE_HOME &
'stop')
        su - $ORACLE $ORACLE_HOME/bin/dbshut $ORACLE_HOME &
        echo "usage: $0 {start|stop}"
        exit
esac
exit
Then I had to delete the listener.log and startup.log files in $ORACLE_HOME because they were incorrectly owned by root.

How to Configure Linux Kernel for Oracle8

Hello :
Could you please tell me How to configure the linux Kernel to
accommodate the SGA ?
I run the ipcs command and didnt list nothing. I already look the
linux library to find out how to set the parameters listed on
page 4 on chapter 2 "setting the enviroment" on the linux
Installation guide for Oracle8 but I couldnt find nothing.
Could you please help me ?
regards
Mauricio Spamer
null

Saif Manzoor (guest) wrote:
: Go to the following site
: http://jordan.fortwayne.com/oracle/
: you will find some tips on configuring the kernel.
: Saif
: Mauricio Spamer (guest) wrote:
: : Hello :
: : Could you please tell me How to configure the linux Kernel to
: : accommodate the SGA ?
: : I run the ipcs command and didnt list nothing. I already
look
: the
: : linux library to find out how to set the parameters listed on
: : page 4 on chapter 2 "setting the enviroment" on the linux
: : Installation guide for Oracle8 but I couldnt find nothing.
: : Could you please help me ?
: : regards
: : Mauricio Spamer
I have the same problem. What I have to do?
Thanks.
Formiga
[email protected]
null

How to configure DSN in Linux for use in Essbase?

Hello everyone,
Can anyone help me out about how to create a DSN in Linux to load data from Oracle into Essbase?
Configuration:
Oracle 10g R2 installed on the same box as Essbase (11.1.1.1)
OS: RedHat Enterprise Linux 5.0
(Since no DSN is configured, I am getting an error "No data sources defined. Please create one to continue" every time I try the 'Open SQL' option in a rule file)
Thanks,
Sayantan

I am no expert on this subject, mind you, but I did recently work with Oracle support regarding an ODBC issue. My issue was primarily with a Teradata ODBC connection, but while we were looking at the .odbc.ini, he helped me fix my Oracle connection as well.
He mentioned that we were connecting with the 'Oracle Wire Protocol', and my Oracle ODBC description in .odbc.ini looks like below. I'm not sure what all the entries are, but I do know that Driver, Hostname, SID, and Portnumber are mandatory (there may be other mandatory entries as well, should be some documentation somewhere on it)
Here is my .odbc.ini definition for an Oracle Wire Transfer database connection
[LBR_FCT2]
QEWSD=39264
Driver=/opt/hyperion/common/ODBC/Merant/5.2/lib/ARora22.so
Description=Merant 5.2 Oracle
ApplicationUsingThreads=1
Hostname=ora-godev2a
SID=godev2a
PortNumber=6364
ArraySize=60000
CatalogIncludesSynonyms=1
CatalogOptions=0
DefaultLongDataBuffLen=1024
DescribeAtPrepare=0
EnableDescribeParam=0
EnableNcharSupport=0
EnableScrollableCursors=1
EnableStaticCursorsForLongData=0
EnableTimestampWithTimeZone=0
LocalTimeZoneOffset=
LockTimeOut=-1
LogonID=
OptimizeLongPerformance=0
Password=
ProcedureRetResults=0
UseCurrentSchema=1

How to configure connectivity between two vm linux hosts

Hello All,
i have installed vm workstation with two RHEL4 linux installation.
Node 1:RHEL4
Node 2:RHEL4
i have configured 2 ethernet cards am able to ping in a host but not each other.
i have tried to ping from Node 1 to Node 2 am getting icmp_seq=0 Destination Host Unreachable .....
kindly suggest how to configure connectivity between two host permanently.please explain with example if possible. or suggest any link.
thanks,
Mike.

1003614 wrote:
thanks for quick reply ....Oracle vm workstation 4.2 am using.
... then your post is now moved to the appropriate forum space for your question (Oracle VM for x86).

How to configure listener when 8.1.5 & OAS 4.08 on same Linux box

Linux: Red HAT 6.1
OAS: 4.08
ORA: 8.1.5 sp2
When I install OAS on different home on the same server where the 8i is installed and try to start up the lsn service for it I get an error. How the configuration should be done in this case where we have two different homes with two different listener versions? whcih one should be used ?
Thanx
null

I did the manipulation...
The listener starts well, but the creation of a DAD ( Net 8 service version, of course) is impossible. After the sys password prompt, it opens a blank window,
and nothing more ...
The dadadmin cgi has been started and is running on the server, but does nothing.
Config : RH 6.1, Kernel 2.2.12, oas 4.0.8.1,
768 Mo RAM, enough disk, TNS_ADMIN set for oas4.0.8.1 to the tnsnames.ora of Ora 8i, distinct ORACLE_HOME
Any clues ?
Thanks.

How to configure printers in SUSI LINUX

Similar Messages

Maybe you are looking for