How to configure PRO*C in ORACLE 8i ?

Hi all,
I have installed ORACLE 8.1.6 in my LINUX system. I thinku proc is not configured though precomp folder exists .
How can I configure it ?
please help me in this regard.
Thanks in advance,
Trinath somanchi,
Hyderabad.

hello ...
enter in
http://www.oracle.com/pls/db102/portal.portal_db?selected=2 between demand and type in "create database"
or read others docs ORACLE.
AF

Similar Messages

How to configure debug mode in Oracle 11g ?

I am making Oracle Argus system based on Oracle 11g DB.
I heard there is debugging mode in Oracle DB to investigate trouble.
How to configure debug mode in Oracle 11g ?

Are you talking about oradebug:
SQL> oradebug setmypid
SQL> oradebug unlimit
SQL> oradebug dump systemstate 266
SQL> oradebug dump systemstate 266
SQL> oradebug -g all hanganalyze 3 ---> g is for RAC database instances
Thanks,
http://gssdba.wordpress.com

How to configure Pro*c/c++ environment Oracle 8.1.7 for RedHat 7.0

Hi All,
I have installed oracle 8.1.7 on red-hat-linux7.0. but I don't know how to configure the environment for Pro*c/c++ programming.
Anxious, urgent, someone can tell me!
thank millions, and best of luck
john.

Oracle 9iAS Documentation can be found at,
http://technet.oracle.com/docs/products/ias/content.html
You can access few samples of web query in
Oracle JSP demos, from your iAS Apache main page. There are XML, JDBC and SQLJ samples.

How to configure global transaction wthin Oracle AS JMS and Oracle JMS

How to configure global transaction if I take a message from Oracle JMS(AQ) and send it to the Oracle JMS?

Which version of OC4J are you working on?
In OC4J 10.1.3.x, presume your OC4J JMS listens messages via MDB which uses a resource adapter as a message listener. The resouce adaper could be the generic JMS adapter deployed in OC4J as the default.
Resource adapter configuration to support MDBs is included in the standard ra.xml file, which lists the message listener types that the resource adapter supports.
The MDB developer or deployer configures the MDB in the ejb-jar.xml file, through a <message-driven> element.
In addition to above, configuration in the ejb-jar.xml file specifies whether an MDB uses transactions.
1) The <transaction-type> subelement of <message-driven> in ejb-jar.xml has a value of Container, and the <trans-attribute> subelement of <container-transaction> (under the <assembly-descriptor> element) has a value of Required. In this circumstance, if there is an imported transaction, then message delivery and related work are performed within that transaction. If there is no imported transaction, OC4J creates a transaction, and message delivery and related work are performed within that transaction.
2) The <transaction-type> subelement of <message-driven> in ejb-jar.xml has a value of Bean. In this circumstance, the MDB manages the transaction. If a transaction is imported, OC4J will suspend it before the message delivery method call to the MDB, in order to avoid conflict.
Message delivery is not transacted if the <transaction-type> subelement of <message-driven> in ejb-jar.xml has a value of Container, but the <trans-attribute> element has a value of NotSupported. If there is an imported transaction in this circumstance, OC4J will suspend the transaction before the message delivery method call to the MDB.
Details could be found from OC4J Resource Adapter Guide.

How to configure http server in oracle 10g

Hi
I am configuring apex 3.2.1 on oracle 10g 10.2.0 I need help how to configure http server bec i did not find any Apache file or folder in 10g if it is then how .
Arshad

Hi
I use to configure only this in $ORACLE_HOME/forms/server/forms.conf (and restart ias):
AddType application/x-orarrp rrp_
AddType application/x-orarrp-text rrpt
AddType application/x-orarrp-ps rrpp
AddType application/x-orarrp-pdf rrpa
AddType application/x-orarrp-rtf rrpr
AddType application/x-orarrp-html rrph

How to configure SNMP agent for Oracle 10g

Hello,
I've installed oracle 10g in a Windows 2000 SP4 and I want to monitor database using SNMP.
I've already installed Windows SNMP agent but I haven't any idea how to configure Oracle in order to grant SNMP monitoring.
What should I do?
Is Oracle database ready to be monitored via SNMP by default?
Thanks in advance for your help.
Regards,
Carles

Hello,
Thanks for your message.
In fact, I already found this doc in oracle, but it just show executables I have to install and my question can I install these executables.
I've already installed Windows SNMP agent, configured and testedwith disk space checkings, but it doesn't work fine with Oracle.
I launched Oracle Universal Installer and I checked Installed Products, but I haven't found how to install SNMP agents for oracle.
How can I add Oracle Peer Master Agent and Encapsulator to my oracle installation?
Thanks again for your help.
Regards,
Carles

How to configure Toplink Webclient on Oracle

i have installed toplink sample application on Oracle10g app server.
to profile the sample app, i installed toplink webclient but when i try to invoke the toplink webclient, toplink webclient page flases and then show a blank page with HTTP 500 error.
can any one please tell me how to configure the toplink webclient on oracle server.
the steps that i followed to install the toplink webclient are as follows
1) downloaded the toplink_webclient.zip file from the oracle site
2) unzipped and ran the assembleWebClient.cmd file and got the toplinkwc.ear file
3) installed the ear file and tried to invoke the toplink webclient by the url
http://<appserver>:7777/toplinkwc
please let me know if i need to do some more configuration
Thanks
Raghav

Hi
I see that TopLinkServlet refers to the "oracle.toplink.webclient.control.TopLinkServlet" class file which is not available in the application jar. could this be the issue ?
how do i get these class files.
when we run the ant on webclient downloaded from the oracle website, these class files are not compiled.
here is the web.xml file of toplink webclient
D:\OraHome\j2ee\home\applications\toplinkwc\toplinkwc\WEB-INF\web.xml
     <servlet>
          <servlet-name>Controller</servlet-name>
          <display-name>Controller</display-name>
          <servlet-class>oracle.toplink.webclient.control.Controller</servlet-class>
     </servlet>
     <servlet>
          <servlet-name>TopLinkServlet</servlet-name>
          <display-name>TopLinkServlet</display-name>
          <servlet-class>oracle.toplink.webclient.control.TopLinkServlet</servlet-class>
     </servlet>
****************

How to configure the rule in oracle configurator

Hi All,
We are trying to create a rule in oracle configurator . The requirement is sum of the quantity of the selected component should not exceed 60 quantity. Can someone suggest me how to achieve this ?

Hi,
You can use the "Resource" Component to track the quantity of the selected component.
For example set the "Resource" value to 60 and use the "Consume From" rule to relate the "Selected component" and "Resource". So here every time when the required component is selected, it consumes value from the Resource which is 60.
The value of the Resource can be positive or Zero but a Resource is violated if its value becomes negative at run time (That is over-consumed).
Hope this help for your requirement.
Regards,
Kumaresan

How to configure JDBC connection in oracle BI publisher with teradata datab

Hi,
I am going to use Oracle BI publisher to create report.
Our database is Teradata.
How to create database connection for Teradata in BI publisher.
How to create JDBC connection.
What should be the Database Driver Class?
What should be the connection string format?
Please provide me the suggetion.
Thanks,
Santanu Manna

Hi;
I suggest please refer below which could be helpful on your issue:
How To Generate XML Output (Excel, HTML, PDF) for FSG Reports [ID 804913.1]
E-XMLP: BI Publisher Report RTF Template to Excel output is not same as PDF,RTF or HTML format.[Article ID 1515711.1]
BI Publisher Enterprise Excel Output File Size is Too Large [ID 1271544.1]
Regard
Helios

How to configure Remort Printing in Oracle 10g

Hi,
I want to configure orarrp utility in my oracle 10g oracle application server. Can any one help to install the utility and please let me know what are the Pre request to install that.
I hope I need to change the httpd.conf file in oracle application server but I didn't find that file in (C:\DevSuiteHome_1\Apache\Apache\conf)
I really appreciate your support
Chaitu

Hi,
Please post your question in the appropriate forum.
Category: Application Server
http://forums.oracle.com/forums/category.jspa?categoryID=193
Thanks,
Hussein

How to configure distributed transaction in Oracle Database Gateway for ODBC? (ORA-02047)

I am connecting from Oracle to another database server (MS SQL Server, DB2 the error message is the same) through an ODBC connection using Oracle SQL Developer. (This is how I set up)
I want to query the schema of a non-Oracle database using the data dictionary mapping of the Oracle Database Gateway for ODBC.
This works well:
select * from all_tables@katimssql;
But this doesn't:
create table alltables_mssql as
select * from all_tables@katimssql;
Output:
Error report:
SQL Error: ORA-00604: error occurred at recursive SQL level 1
ORA-02047: cannot join the distributed transaction in progress
ORA-06512: at "SYS.HS$_DDTF_SQLTABLES", line 58
ORA-06512: at line 1
Does anyone know the solution of this?
Thanks in advance,
Kata
Details:
Oracle Database 11g Express Edition Release 11.2.0.2.0
Microsoft SQL Server 2008 (SP2) - 10.0.4000.0 (X64)
ODBC Driver: SQL Server Native Client 11.0 (32 bit)
initkatimssql.ora:
HS_FDS_CONNECT_INFO=katimssql
HS_FDS_TRACE_LEVEL = ON
HS_TRANSACTION_MODEL = READ_ONLY_AUTOCOMMIT
I tried these, none of them worked, the error message is the same.
HS_FDS_TRACE_LEVEL = off
HS_TRANSACTION_MODEL = SINGLE_SITE
HS_TRANSACTION_MODEL = READ_ONLY_AUTOCOMMIT
HS_TRANSACTION_MODEL = READ_ONLY

Hi Kata,
this won't work as the ALL_TABLES is not a table that exists in your SQl Server - instead it is a "mimicked" table. This means the gateway will check if you have on your SQL Server a table called all_tables and when there's no table it will start an internal mechanism to check out what sort of tables exist in your SQL Server database. So the gateway is starting internally another transaction to get details from the foreign database and DG4ODBC can't participate in distributed transactions at all. Instead of using all_tables you have to use a real SQL Server table like SQ Server sys.objects or sys.tables.
- Klaus

How to configure Content server with Oracle Portal

I am working on oracle portal using JDeveloper 11.1.1.5.0. I need to configure Content server to work with UCM. Which content server version should i use and what basic steps required to configure it.
OS environment is Windows XP SP3.
Database server is Oracle 10gR2

Hi
"I need to configure Content server to work with UCM." - I am not clear on this .
UCM is content server .
Now if you are looking to have UCM contents rendered on Oracle Portal then you will need to use Content Portlet Suite .
Hope this helps .
Thanks
Srinath

How to Configure DAD entry in Oracle 11g by embeded pl/sql gateway

Hello frnds...i want to configure dad entry. i am using dad(default) by pl/sql gateway.. Or suggest to use by Http server..
Vivek

I have some procedures using owa , generating html in oracle9i and now I will upgrade DB to oracle11g R2,
What do I have to do to have my procedures using owa working in Oracle11g ?

How to configure and call Jasperreport from Oracle Forms 10gr2

Dear All
Please help me in configuring Jasperreport with Oracle Forms 10gr2 or AS.
And also tell me how to call a report from Oracle Forms.
Thanks

I have a pro*c precompiled program on unix server (unix environment) and I want to execute or running it from oracle forms, release 4.5 on MS Windows.
how do i execute or running it from oracle forms, release 4.5 ? please tell me what the command (syntaxs) is and all about it ?you can mail me at [email protected]
thank's

How to configure oracle listener profile for multiple oracle database

Hi,
I am going to install solution manager system in the same server of ERP EHP4 on Windows. Both DB are oracle.
I'd like to know how to configure listener in this kind of envirnmonent.
a. use two listener and different ports
b. use same listener but different ports
c. use same listener and same port
Which is the correct mothed?
And, after installation, there seem three set of profiles of listten, one for ERP, one for SLM, and the other for OS?(%windir%system32), which one is functional?
Please advise.
Thanks a lot.
Regards,
Alex

Hi,
standard installation is creating new configs for listener for each instance.
I would recommend to use one listener per each instance.
YOU CAN NOT HAVE one port number for two differnet systems!
If you want to use one listener than you must adapt tnsnames.ora, listener.ora and ensure that both systems will use different port numbers.
For example PORT= 15<system number>
Peter

How to configure PRO*C in ORACLE 8i ?

Similar Messages

Maybe you are looking for