How to configure reading pane in Mail

How does one configure the reading pane in such that it is on the right hand side in Mac Book Pro

think i set it up like exchange but calendars doesn't sync and AB no sure,you also can do it in system preferences in the mail,calendars pane ..

Similar Messages

  • How to personalize reading panes in Outlook 2013, where 2 different users share the same mail account in O365

    A company is using O365, with Outlook 2013 on their clients. Two people added a general account to their accountlist in Outlook 2013, which is used for "sales". For example, customers can send questions to this "sales" mail account and
    both employees can read the mail and answer the customer from that acoount.
    My question is the following.
    Both employees would like to have a different reading pane/lay-out. At this moment, if the first user change his view (in his Outlook client) to the view he likes, the second user see a change of his view too. The first person like to see the preview
    pane, the second don't... If the second change the view again to the one he likes, the first person will lose his prefered view.
    I can't see any options to personalize the views at this account in Outlook or elsewhere in O365 for both people seperately. Is it possible anyway? If yes, how?

    Hi,
    I am not familiar with Office 365 account. But in Exchange On-premise server, the Outlook view would be synced to the Exchange mailbox.
    If two users open the same Exchange mailbox in Outlook, the synced view for the mailbox would be also be updated to the local Cached Outlook profile. Therefore, two users can't always view the mailbox in their customized views respectively.
    Regards,
    Winnie Liang
    TechNet Community Support

  • How to configure google apps in Mail 5 of lion os x not as gmail but as exchange

    Hi All,
    I have been trying hard online to find some resource to configure google apps in Mail 5 of lion os x not as gmail but as exchange.
    The reason is that I want to sync my contacts as well as calendar and email but if configured as gmail ot only takes email and may be calendar.
    I use this over all my devices and need my calendars and contacts to be synced all over
    I called the customer support in USA but they directed me to call a UK number.
    Appreciate your guide line, or feedback with an online resource.
    Best regards,
    fawzy

    think i set it up like exchange but calendars doesn't sync and AB no sure,you also can do it in system preferences in the mail,calendars pane ..

  • How to configure users for internal mail routing only in exchange 2013

    Hi Guys!
    I have a scenario here that i have three (3) group of users, one group is able to have an inbound and outbound mail, meaning they can send and recieved emails from internal and external.The second group of users should have inbound mail(local mail) only
    (cannot send and recieved mails from internet), and the third (3) user is they can recieved an outbound mail but they are not allowed to send mail directly to the client,(Ex.
    [email protected],[email protected],[email protected]) instead they will use the
    [email protected] as the reply to the client. Please let me know how to configure group user 2 and 3.
    Thank you.
    regards,
    Paul

    Hi Paul,
    Great advice from Maganti, just elaborating steps:
    Prevent Group 2 send e-mail to internet by transport rule:
    1. Login EAC with administrator, Mail Flow---> Rule, click “Create a new rule, then give a name “Group2 - No Internet Mail”.
    2. Conditions: select "From a member of a distribution list" & select group "Group2"
    3. Select another condition "Sent to users inside or outside the organization" & Select Outside.
    4. Actions: select "send bounce message to sender with enhanced status code" & write your custom message like “You are not authorized to send mails to internet”.
    Prevent Group 3 directly send e-mail to internet, however it can send message as group:
    We also can create a transport rule which is same with Group2, then open Active Directory Users and Computers to add send as permission with another group (contain same users as group3).
    Best Regards,
    Allen Wang

  • How to configure users for internal mail routing only

    Hi Guys!
    I have a scenario here that i have three (3) group of users, one group is able to have an inbound and outbound mail, meaning they can send and recieved emails from internal and external.The second group of users should have inbound mail(local mail) only (cannot send and recieved mails from internet), and the third (3) user is they can recieved an outbound mail but they are not allowed to send mail directly to the client,(Ex. [email protected],[email protected],[email protected]) instead they will use the [email protected] as the reply to the client. Please let me know how to configure group user 2 and 3.
    Thank you.
    regards,
    LRMCP

    Hi LRMCP,
    Procedure is perfect which is given by Benoit, just elaborating steps.
    Prevent form Sending Mails:
    Create a transport rule on Hub Transport Server:
    Organization Configuration -> Hub Transport -> Transport Rules -> New Transport Rule -> Give Name “Group2 - No Internet Mail”
    Conditions: select "From a member of a distribution list" & select group "Group2"
    Select another condition "Sent to users inside or outside the organization" & Select Outside.
    Actions: select "send bounce message to sender with enhanced status code" & write your custom message like “You are not authorized to send mails to internet”
    Prevent from Receiving Mails:
    New User: You can select “require that senders are authenticated” while creating new users which will stop receiving mails from internet.
    User -> properties -> Mail Flow Settings -> Message Delivery Restrictions -> Properties -> set Sender Authentication.
    For Existing Users:
    You have already a group named "Group2" so set sender authentication for all members with this single command.
    Get-DistributionGroup "Group2" | Set-Mailbox -RequireSenderAuthenticationEnabled $true
    Same procedure mentioned for group2 can be followed for Group3 to prevent from sending mails.
    Amit Tank || MVP - Exchange || MCITP - Exchange 2007 || http://ExchangeShare.WordPress.com

  • How to recognize read n unread mail

    hi
    i m trying to read a mail from java prog using pop3
    please tell how to differentiate b/w read n unread mail
    thanks
    regards
    mahima

    http://java.sun.com/products/javamail/FAQ.html#newmsgs

  • How can I read my junk mail?

    How can I read my junk mail

    Still finding that every time I look at the trash folder it's empty even though there are 300+ messages in it.....since I've updated to ios7 it's even sending some VIP messages there and I can't read them!!

  • How to disappear preview pane in Mail 10.9?

    I cannot determine how to get the preview pane to disappear in Mail 10.9. Double clicking on the separator bar does nothing. I would like to use the 'classic' display, but I cannot make the pane at the bottom go away - and subsequently every message automatically opens when I scroll past it (whether I'd like to open it or not).
    Using the 'new and improved' display version, I cannot make the content pane on the right-hand side disappear either.
    I assume this is a bug, not a feature, but what's the real story?

    This is Mail behavior since I 'upgraded' from 10.6.8 to 10.9.
    The divider between the preview pane and the list cannot be dragged all the way to the right -- the right-hand separator stops about three inches from the right edge of the Mail window.
    Likewise, when I switch to 'classic' list view, the preview pane below cannot be completely reduced -- the separator bar stops about 1.5 inches from the bottom of the Mail window.

  • I just traveled abroad.  I-phone 4s  will connect to any server. How can I read my e-mail

    I just traveled abroad. My i-phone 4 s will not connect to any server. I have not been able to read any mail or connect to the Internet. How do a fix this issue? Do I have to call my carrier?

    Do you have data roaming enabled in Settings?

  • How to configure number of importing mail?

    hi guys,
       I'm adding my yahoo mail account into Mac Mail recently, and I have got around 5000 mails in my yahoo account.
    When I succesffuly added the yahoo account in Mac Mail, the system imports all mails to Mac (starting from very beginining)
    It is too much for me and spending a lot of time and data. Actually I don't need all of them, I just want to get 50 of the latest mail from yahoo.
    Is there any way I can configure the number of importing mail for my first time import?
    Could anyone help.??

    Hi,
    In MN22 go to the Commuunication tab and there put the desired number of copies to be output like 2 or 3 against the field "Number of Messages" and save.This will get the desired result.
    Dhruba

  • How to configure read only user on IAP?

    Requirement:
    In environments, such as enterprises and campus universities, there are instances where few administrators only monitor the IAP clustered networks. For such users, a read only user can be configured on IAP.
    Solution:
    In IAP software, a provision is given is to configure a read only user in the system settings, under "Admin" tab.
    Configuration:
    Follow the below steps to configure radius authentication in IAP:
    Login to IAP web interface
    Select "System" from the main menu and then click on "Admin" tab
    Under View Only settings, enter the username and password.
    Verification
    Logout of the IAP web interface and try logging in using the username and password created for read only user.
    This read only user will no longer be able to see configuration options. Below screenshot shows the difference of menu options between an administrator and read-only user:

    HG,
    Please check this link.
    http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00808d9138.shtml
    We need to set up command authorization.
    Regards,
    ~JG
    Do rate helpful posts.

  • How to configure OCS mail to send out s

    dear all,
    i have OCS R2 on Linux AS. i can send send/recive emials localy but we need to start send/recive email outside the domian to send to hotmail, yahoo...etc.
    i search alot and tried to configer the SMTP relay server but i am still not able to send emails outside domain
    plz help me with the steps needed
    regards

    Hello,
    Even i am facing the same problem as yours. I have no idea how to configure ocs to send mails out.Can you tell me if u got the solution . thank you

  • Possible to configure data detection in Mail?

    The automatic data detection to make calendar events from mail messages would be great if it had been able to detect more date formats and languages then it does currently. As for messages in norwegian, it detects calendar data in text in just a few cases, and even very common date and time formats are not supported.
    I guess this little regionalization issue is a candidate for an update later on, but I was just wondering if anyone has discovered a way to configure the data detection.

    I would also like to know how to configure data detection in Mail. It is an amazing feature, I don't have a regionalization issue, but when it creates an ics event and puts it into iCal, you cannot edit it. I goes into whichever calendar you have listed as your first selection - so in my case, a work-related event is going into my personal calendar. There is no way to edit it to move it to another calendar or to even attach a note or alarm.

  • How To Have Reader Print A Document Immediately Upon Open

    Hello Forum Members:
    Does anyone know how to configure Reader 9 to immediately print a document to the default Windows printer when it is opened?  So, the process would be to double click a PDF document and then have it immediately print to the printer (with or without a visual rendering on the screen) with no other clicks.
    Ideas?
    Regards,
    Rich Locus
    Eugene, Oregon

    Adobe Forum:
    I found one more solution to this issue.  If you have a directory with many PDF files and you want to print some or all of them, just get into Windows Explorer, select the files you want to print, right click the selected files, and choose "Print".  It will print all the documents with no dialog box and it sends them all to the Windows Default Printer.  All you have to do is just close the last empty Adobe Reader window.  A quick and easy method.
    Regards,
    Rich Locus

  • How do I change the reading pane or preview pane from vertical to horizontal in Mail?

    How do I change the reading pane or preview pane from vertical to horizontal in Mail?

    From the Mail menu bar click Mail > Preferences then select the Viewing tab.
    Select:  Use classic layout

Maybe you are looking for

  • HP Color Laser Jet CM1312fi MFP- My printer is not Wireless-C​apable.

    I used to print remotely through my wireless modem/router (printer was connect to router by USB and we could print from our wireless capable laptops from anywhere in the house)  but now I can't remember how to set it up.... I connected the wireless r

  • Can't convert to pdf from word

    my wife uses adobe acrobat 6.0 standard with office 2003. The problem is that she can't convert to pdf from word. it works fine with an excel doc. but not a word. I did update to 6.0.1 and still nothing. There is no error message and the word documen

  • Scrolling problems

    Hi, I have a strange problem with a scrollbar. It's a custom made scrollbar. I'm using a dynamic contet (asp, xml), which is loaded as a menu and as a content. When U click on a menu item, the content in the main textfield changes. The problem is tha

  • Transferring an Employee from one Company Code to Another Company Code

    Dear All,                    we are implementing the HR Implementation for the group of Hospitals, each hospital being an Individual Legal entity, but there is a requirement, where in there is a possibility that the employee may be transferred from o

  • View Accounting in FA R12 not working

    Hi All, I cannot access the view accouting button in fixed assets in R12. We have already run the create accounitng but view accounting is frozen. Thanks and Regards, MPH